1658 modeli
Please click if you appreciate my work :) The German automotive icon – BMW E36 M3 as wall-mounted art. This 3D printable BMW E36 M3 model captures the distinctive body lines, sporty profile, and aggressive style of this classic BMW.…
Wydruk około 12,40 €–15,15 € nettoWstępna wycena jednego wariantu
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
Wydruk około 9,25 €–11,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 8,10 €–9,90 € nettoWstępna wycena jednego wariantu
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
Wydruk około 17,83 €–21,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print settings: material PLA/PETG no supports 0,25 layer, infill 10%/15% Aurapol natural filament PLA Na propojení třeba 2ks trubička nebo závitová tyč, nejlépe nerez, 10mm průměr, se závity na koncích(45mm) a 8ks matice M10. Propojení…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Wydruk około 13,63 €–16,66 € nettoWstępna wycena jednego wariantu
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
Wydruk około 8,19 €–10,01 € nettoWstępna wycena jednego wariantu
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. This version allows to neatly wrap the DC cord around the 2-layer spool integrated in its base. I made this version…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This wallmount allows you to place your LEGO Speedchampions Car's in an 45° degree angle off the wall. It will fit all cars which have the basepart as you see in one of the pictures, like these: Lamborghini Countach #76908, Koenigsegg…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swiffer Wetjet Wallmount Just a wallmount for the swiffer wetjet. Nothing fancy, but useful. Print Instructions PLA works just fine for this application 0.2mm layer height 4 perimeters 40% infill
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Wall bracket for Unifi Flex Mini.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
Wydruk około 0,54 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No matter which Artillery Sidewinder X2 review I saw - all, myself included are unhappy with the original Artillery Filament spool holder. It is wobbly, tends to fall apart, and the filament sensor holder is awkwardly positioned. Thats…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…
Wydruk około 8,84 €–10,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is a battery wall mount for the 10.8 volt batteries from Makita. Simply screw with two or one screw to a board or directly to the wall.
Wydruk około 1,27 €–1,56 € nettoWstępna wycena jednego wariantu
I designed a Wallmount for the Bosch EBike Charger with 6Ampere. It is a little bit bigger than the other ones (2 Ampere or 4 Ampere). You can use this design for every Bosch Ebike charger Happy Printing. :-)
Wydruk około 8,06 €–9,86 € nettoWstępna wycena jednego wariantu
To hang a board onto the wall, you have to pre-drill a 6mm deep hole with a 30mm forstnerbit and screw the mount into your board.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
A variation or original minimal design.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
I have designed a Wera Tool-Check PLUS holder that I use to organize my tools in an Ikea cabinet. Despite the poor quality of the wood, the holder's screws hold well. However, the glow-in-the-dark feature is not very visible because the…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For a complet set you need 1 Wall mount for caulking gun 3 tube holder 1 wallmount for push knobs 3 wallmount for nozles Happy printing :D
Wydruk około 9,67 €–11,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallmount for two Samsung T5 external SSD
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
This is massive Thule VeloCompact 926 and 926+1 wallmount, I used 50% infill and 80% around screws. it is quite massive, I know but better safe then sorry :D
Wydruk około 11,35 €–13,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a simple wall holder that would fit perfectly the guitar, it follows perfectly the shape of the head distributing the load evenly and reducing even further the possibility of dents, it leaves a confrontable tolerance for the neck,…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena jednego wariantu
If you want to use this mount you have to cut your rail. I reccoment cutting rail to width of the place you want to put it in -7mm. You can put it right to the ceiling when mounting. And don´t forget to put those hangers first :) . I…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Gcode included for PLA 0.4mm. If you print correct way up no supports needed.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is an adapter for attaching M42 mount lenses to L mount (Panasonic, Sigma, Leica mirrorless single-lens cameras). It has a tilt mechanism that tilts the lens by about 10 degrees. Applying a thin layer of grease to the threaded and…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Just a vertical rubishbagholder to glue it to the wall with doublesided tape.
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
The dog waste bag dispenser has been extended to include a wall rail, a lid and a viewing window. The dispenser can be easily removed for refilling. The large opening at the front makes it easy to check the fill level. The lid is secured…
Wydruk około 12,06 €–14,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Necklace holder for 11 necklaces intended for wall mounting with adhesive mounting. Printed with MK4S on 0.2mm layers using PLA. I suggest adding a layer modifier for the layers that include the hooks to increase to 100% infill for…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
Wydruk około 7,89 €–9,65 € nettoWstępna wycena jednego wariantu
Die 3 Teile können zusammengesteckt werden und halten gut zusammen. Anschließend an die Wand schrauben oder kleben (Doppelseitigesklebeband). The three parts can be fixed together and hold securely. Then screw or glue them to the wall…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu
ideally printed in white, so it fits nicely to the design and colors of the module itself
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
This simple design is meant to hold the charger of the MSI modern 14 laptop in the wall. Its perfect por cbale management and to avoid breaking it, specially the cable that looks a little bit delicate. To hang it on the wall you can use…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Držák na stěnu pro FlightAware Flightfeeder V10 (modrý s obrazovkou) / Wallmount for FlightAware FlightFeeder V10 (blue with display) LZE přidělat za chodu zařízení / LIVE mounting possible Navrženo pro 3x M5 šroub / Designed for 3x M5…
Wydruk około 4,98 €–6,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallmount for the NLG remote control
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This wall mount can be used to put the Vana DC90 remote into. The remote can also be used when it is at the holder. Print Instructions: Print standing upwords, not laying on the ground. This way, no support is need and the print quality…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wandhalterung für das Netzteil (2A Standard) vom Trittbrett Fritz 2.0
Wydruk około 9,83 €–12,02 € nettoWstępna wycena jednego wariantu
At the end of 2017, I found Mike-vom-Mars' hand gestures on Thingiverse (thing:2641409) and decided to use those as a starting point. Some FreeCAD editing was involved; I enlarged the hands so it would fit the 13cm+ body width of my…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
I created the Playstation symbol by using the "Negative Volume" function in PrusaSlicer 2.4. Scaled to 50% (orientation: X=-40; Y=0; Z=1.05; and rotated in the appropriate direction). The wall brackets need to be mounted at a distance of…
This is a wall mount Basketball Holder for a Size 7 Basketball. I printed with 50% cubic Subdivision Infill, .2mm layer height and 3 line wall thickness at around a 9 hour print in ASA which seems to be plenty Sturdy. The Bracket is…
Wallmount to Wall mount to mount the Echo Pop on the wall at a 45 degree angle. Printed in PLA
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
Nothing special - just a quick Design to mount the AMS on the wall. Works fine for me. If there are any Problems, don't hesitate to contact me! Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABS For example…
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
Super easy to use wallmount for the Creality Sonic Pad. Just slide it in with the feet, and you're ready! Printed with 20% infill in PLA. No supports needed
Detailed pike head wallmount decoration
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
A simple holder to store your darts safely on the wall.
Simple centric one-hole, one-screw skadis wallmount. Unkomplizierte Skadis board Montage mit einer Schraube.
A stand for hanging your PS5's Dualsense right in your wall
Xbox controller mount for the honecomb. Print the back on its side it doesnt need supports. print 2 of the pegs they needs two m4x12 screws with nut. Note: took the slope dims for this from chewbuggas wall mount they did that perfect. if…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
The perfect piece for the workshop to keep everything neatly organized. I recommend 3 perimeters, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill. Feel free to check out all my little gadgets for the workshop.
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
Basically the shoe organizer by JGR completely remodeled in FreeCAD that is now Wall mountable an resizable by entering your EU shoe size into the FreeCAD Spreadsheet.
Available Options How to Print Prusa Profile: 0.15mm Quality Other Settings: No support For usage with Wera Kraftform Micro screwdrivers Mounting The Model utilizes 3mm Mounting holes with a 2mm chamfer for screws with a maximum head…
I wanted to make myself a Wallmount, which works for booth pads (125 and 150mm) for the Mirka Deros (550CV/5650CV. This way I can hang the sander no matter what plate diameter I just put on it. Like it? Please don’t forget a like any…
A wall mount that works in almost every orientation. This also works as an under-table mount. this was designed printet for a friend of mine so I don't have that many pictures. I'll print a new version to take more pictures of.
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Stand or Wallmounted Ständer oder Wandhalter
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
A wall mountable case for the ipad mini second gen (A1491) ## Design Holds and iPad mini. Tested with a second generation A1491 but may work with other generations Uses no screws ## Features - Works with 90 degree and straight through…
Hi, this Wallmount replaces the original stand. I printed mine in PETG with 0.2mm layerheight and no supports. I got some problems printing the front of the mount as you can see on the pictures but i fixed it in the uploaded model. The…
Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…
Wallmount for Makita DJV181 Jigsaw
English I created a simple wall mount for the Fritz!Box 4060, this uses the original mounting points of the box. If you like the design, feel free to buy me a beer ;-) Versions There are 2 different versions, a smaller version and a…
kompakter Maul/Ringschlüssel Halter. Guter halt. (kann man über Kopf halten)
Wallmount for the Eufy Homebase 3. There are two cutouts for the power cable so you can place the homebase facing left or right.
A simple wall mount for my 125mm exenter sander. Probably will work for other 125mm units as long as they are not too heavy. Feel free to leave a like or make if you like it! Category: Hobby
I loved the simple design from the original, I just wanted to hang my controllers somewhere. Check the Original Files from @ Bengyboo Print 0.2 Layer 4 Walls 20% infill
I simplified this model so that it can be printed without supports and use regular adhesive strips instead of the picture hanging “velcro” ones.
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
Description Wall-mount bracket designed specifically for the IMOU Ranger 2 camera. Features a compact design with just enough space to accommodate the network cable. For best results, print with the camera attachment side facing the print…
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
AK47/AK74/AR MAG 3X wallmount Bed organic supports recommended 0,2 layers
The dangling power brick of my fancy 10GBE switch annoyed me, so I designed a wall mount for it. Two countersunk screws are used to screw it into place. I added a version for the UniFi Lite 8 POE's slightly bigger power brick, so you…
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
Simple bracket for the JK Inverter BMS. Is required twice to attach the BMS at each end to a wall or to the battery hou
Simple wall mounted roll holder for wrapping vinyl rolls.
Halter um den Speedport Smart 4 an die Wand anzubringen. Er wird einfach mit dem normalen Fuß in die Halterung geschoben. Bracket for attaching the Speedport Smart 4 to the wall. It is simply pushed into the holder with the normal foot.
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
Try using adaptive layer height if possible to reduce faces being generated on the flat surfaces. Based on G45
Simple battery wall mount compatible with Cordless Alliance System (CAS) battery. Category: Tool Holders & Boxes
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
Soporte para filamento en la pared, ahorrando espacio. Necesario un tubo de 25mm de diametro para realizar los apoyos.
Wallmount for Dymo Label Manager for IKEA Skadis. Remixed from these models: https://www.thingiverse.com/thing:3167836/files https://www.prusaprinters.org/de/prints/100876-ikea-skadis-hook/comments
Wallmounted Storage solution for helmet an glasses. Designed for use with a 30mm diameter wooden dowel. I used matte black PLA printed with a 1mm Nozzle and .7 layer height. Prints nicely with a smaller diameter nozzle as well.
https://paypal.me/radicalreel Do you know that problem? You want a wall mounted T-handle holder but still be able to easily take the whole set with you? No?.. well I did and made this. Designed for ALDI / Workzone Torx and hex t-handles…
![[REMIX] - Metabo / CAS battery holder (wallmount)](https://media.printables.com/media/prints/428582/images/3546805_617b3b8a-e2a5-4c02-a0af-5a69dad68dc6/large_display_ca59ce33-c81f-42fc-bf7d-b214923a7a65_428582.jpg)
