2123 modeli
>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Hello, I have a clothes peg for you, food. They work beautifully and only require very little material to make. Ideal for attaching laundry while drying. I used PLA/PETG Basic as the material No need to use supports If you are interested…
Wydruk około 1,84 €–2,24 € nettoWstępna wycena jednego wariantu
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop This system uses 3 pieces: Rings - Solid rings, especially .10mm layers are almost unbreakable. Links - Oblong links that connect the rings in whatever pattern you want. Locks…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
English This is another variant of doll clothes hangers I created for my granddaughter, because the number of doll clothes by far exceeded the number of hangers available - the situation was critical ;-) Because of the different sizes of…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This is a chip clip design. Print two of the clips and a spring to make a complete piece. The spring is inserted using a screwdriver.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
This is my design of an elegantly swung hook to hang clothes or bags to a clothes rail. I designed it to provide a classic shape but with a simple and functional profile. How to Print the Hook Print the hook on its side. Larger hooks…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein vollständig druckbarer “fully printable” Kleiderbügel in drei Teilen. So paßt er auf das Druckbett des Prusa i3 MK3S/S+. Einfach jedes der drei Teile ausdrucken, sieben Nieten dazu, alles zusammenstecken, fertig. Wem der Halt der…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple tablecloth clamp in two sizes, with a 15mm gap and with a 21,6mm gap. I am attaching the STEP files and a link to OnShape as well. OnShape Link Note: Please don't forget to leave a rating or a comment. Feedback is important for…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hanger in doll size in two variants - normal and for dress with narrow straps. Can also be used as a jewelry hanger. Scale 1:6, without supports, material PLA, layer height 0.2 mm. This hanger fits on clothes rack, which you can find in…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is a cloth mask based on the Olson design and leveraged from a pattern published by Clayton Skousen and Rose Hedges of UnityPoint Health in Des Moines, Iowa, USA. This is a pattern that needs to be sewn. As the Covid--19 Pandemic…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
En français plus bas Simple clothes peg for using the lonely springs ! It's design for regular size. You have the FreeCAD source file available. Print settings 0.05mm to 0.2mm for the layer height. 0.05mm if you want good quality for the…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
It's a tiny clothespin, but as a single part and print-in-place. It uses a ‘snake-bite' to hold material together because it doesn't have any extra force pushing the clamp closed. The force is much less then you'd get from a clothespin…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design of an intentional technical-looking hook to hang clothes or bags to a clothes rail. I designed it for a minimal material use and with a good compromise of stability. Update 2022-09-27: Added D18 for Ikea furniture. Added…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Clip to hold the tablecloth through windy days
Wydruk około 2,17 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction and Use Case I needed a wall-mountable holder for my clothes iron, so came up with this model. My iron is a Black and Decker Self Clean II which is “vintage”, but I suspect this will work for other models. Printing I used…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basic sewing patterns for barbie dolls (original size). If you want, add for example pleats, fastenings and slits for better fit. You can also add decorative beads, buttons, frill, lace, bow, pocket…I recomend an elastic fabrics. Cut the…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is my design of an simple but beautiful hook to hang clothes or bags to a clothes rail. I designed it to be unobtrusive and functional. Update 2022-09-27: Added D18 for Ikea furniture. Added visual catalog. Added labels to the model…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Tablecloth clip A simple tablecloth clip for tables with a plate thickness of 18-25mm. When using PETG, suitable for indoor and outdoor use. Print instructions - material: PETG - infill: 100% - layer height: 0.2 mm
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
clothespin
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Table cloth clamp for tables with thickness of 18-22mm. I used 0,4mm nozzle, 0,2mm PLA with 6% infill, 4 walls. Worked pretty well for me in the balcony. I hope it does same for you too.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Suszarka na pranie - zabawki dla lalek Suszarka zrobiona dla moich córeczek po tym jak wyciągły ubranka dla lalek z zabawkowej pralki i powiedziały "tato nie mamy gdzie wieszać ubranek..." :) (Clothes dryer - toys for dolls) A dryer made…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Small hook that hangs on doors, have enough space to hold itself and don't impact any functionality of doors :) Printed with Petg, 3 perimeters and top/bottom, 20% infill. It can hold pretty heavy winter jacket, used these for around…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spona na ubrus v2 jednoduchá a spolehlivá klipsa pro upevnění ubrusu na stůl. Ideální pro venkovní použití, odolná vůči slunečnímu záření a vlhkosti díky materiálu PC Blend. Navržena pro stoly s tloušťkou desky do 5 cm . Tiskové parametry…
Wydruk około 8,99 €–10,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
sloth keychain
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
I’ve designed a simple holder for a 28 mm diameter rod, intended to be mounted on a wall inside a wardrobe or wherever you may need it. The holder is designed exclusively for hanging clothes. Do not use it for pull-ups or any kind of body…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an Imitation of the 20 x 138 B Solothurn cartridge. For Flak Cannon caliber 20mm. The cartridge is suitable for exhibition, decoration, or perhaps as cosplay.…
Wydruk około 4,89 €–5,97 € nettoWstępna wycena jednego wariantu
Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We bought a peg basket that had no way to hang from the clothesline frame. The metal handle wire measures 4.2mm in diameter. This hook fits snugly onto the frame so it doesn't come loose during strong winds. No need for any supports.…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Size: 5,1cm x 6,4cm x 1,1cm The sizes are approximately! Do you need other sizes? Contact us before payment! Ask us for custom designs! We are located in Buenos Aires, Argentina. We print 3D cutters, topper cake and more! Find us on our…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
This is an universal clothes drying rack connector available in different sizes. The model names include the size - for example: Pin15.0 Rod14.15.stl means the ribbed part's diameter is 15.0 mm and top clamp's diameter is 14.15 mm .…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diese Halterung ist für das Spültuch Jemako designt damit dieses nach Gebrauch abtropfen kann und dadurch hygienisch trocknet. Es kann völlig ohne Support gedruckt werden, vorzüglich in PETG This holder is designed for the Jemako…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This clip stops the rail from moving around for Clothes Drying Rack from the Reject Shop
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Our clothes were getting some deformities from hanging on the IKEA clothes stand. To mittigate this issue I designed a small cap covering the pointy end. The inside diameter is 19,5 mm. The ball itself has 50 mm in diameter. It is…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
EN: In addition to the instructions for the original, we recommend using additional glue for the screwable rod, as the thread tends to break. I also modified the area around the thread and the transition between base and rod with…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)
Wydruk około 8,16 €–9,98 € nettoWstępna wycena jednego wariantu
Na výběr je ze dvou druhů - děrovaný s hexagonálním vzorem nebo plný. Modely a tiskové soubory jsou přiloženy. --- There are two types to choose from - perforated with a hexagonal pattern or solid. Models and print files are included.
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Design Concept This model is inspired by the practicality and aesthetics of geometric designs. Its sharp lines and curves allow for a strong grasp with minimal material use. Use Ideal for securing clothes on a line or for indoor use on…
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
101.40 x 190.90 x 12.00 mm
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
I designed this clothespin that can be used on various garments as well as for clothes. The presence of some raised lines allows for a good non-slip grip during use. Printing tips: Material: PETG (for its elasticity and outdoor…
Easy to print, easy to assemble, easy to use. Recommends 10 laundress out of 10. 😀 Recommended print settings and material Perimeters: 3 (4 for spring) Infill: at least 30% Supports: no Filament: spring only from PETG and other materials…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
淘宝上看到有在卖这种衣架挂钩，就自己画了一个，用起来确实很方便，希望大家喜欢！ 填充率高一些30%以上，比较牢固。 Taobao saw this hanger hook being sold, so I drew one myself. It's really convenient to use. I hope you like it! The filling rate is higher than 30%, which is relatively firm.
Here's a cute little sloth that is an easy no-support print. Perfect for a desk pet, potted plant buddy, or home decor. Print size at 100% is 70mm/3.3 in. Can be scaled down to 50% *Sloths pictured are painted with acrylic paints Printed…
Dimensions (LxWxH) 70 x 30 x 10 mm (100% scale) Basic information Print in place clothespin. It's designed primarily for laundry, but you can use it for many other various purposes, such as sealing bags, holding stuff together, etc.. The…
Clean your z-axis lead screws easily with this cleaner. Just put a piece of paper towel around the screw and snap the tool around it. Use the Z-movement option in the menu for easy cleaning. Printed with: 0.2mm layer height PLA or PETG…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
An articulated sloth & articulated sloth as a keychain.
Is it practical, useful, and expands on the body of human knowledge? Probably not, but it sure is satisfying.. Introducing the Soft Box! My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! Why 3D print…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…
It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…
Sid the Ground Sloth: Ice Age
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
Designed from the start with thin, small, modular components in mind, this cloth is the pinnacle of FDM hard body mesh fabric design! Measuring at a measly 2.4mm tall at 100% scale, the cloth provides ample flexibility while providing a…
Check out my updated and improved version here . In my pantry we always reach for the clothespin style clips first. This is a very simple and easy to print model that tries to capture what makes the clothespins work better. The “armpit”…
Please see Printical's original sloth listing for a full description! All I did was make life a little easier for multi-material printing a pre-made face.
Check out my Patreon if you want 100+ models, commercial licensing, and monthly model releases! Your support means the world to me and allows me to keep making models! LINK: Patreon Model Description: Here is the Sloth V2 model! Included…
This is a remixed version of the excellent cord spool from Stubbsie to use it as a camping/travel clothesline. I added a hook to the shell of the spool and designed an another hook for the cord end. Printing Print in PETG or ASA/ABS with…
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Clothespin print in place Please adhere to the model's license terms. It is becoming increasingly common for my models to be stolen, distributed without permission, and resold.
Das ist ein Ersatzteil für den IKEA Pax. Es ersetzt die Kleiderstangenhalterung die gern mal ausbricht ;) Druckt es in PETG oder einem anderen flexiblem Matierial - der Schnappmechanismus muss sich etwas bewegen können. Es handelt sich um…
Clothespin clamp. Print without supports, layer thickness 0.2 mm. Use a 0.4 mm nozzle.
Vase modern vase! look like Made from cloth! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
This cookie cutter was made in Fusion 360 and then i printed it on my ender 3 from PLA plastic. If you want, you can check my profile for more cookie cutters :). .
Second iteration of my Minimalist Clothespin Chip Clip. This one has a serrated flat spot that makes it hold bags a little better. I print them with the .2mm Quality preset in PETG with perimeters increased to 4. No supports or brims…
I made this collapsible, print-in-place clothes hanger for the fashion challenge. The idea was to take up a small area so smaller printers can print too, and to design the hanger so that it can collapse for easy travel, all with just one…
A simple and effective design, when you just miss some clothespins. No supports, no brims, no sharp edges. Available with 4 different gap sizes to suit every need. L (4mm gap) M (3mm gap) original design S (2mm gap) XS (1mm gap) Ready to…
Meet Kana, the ultimate symbol of chill vibes and cozy naps! This tiny sloth friend is not only super cute, but also prints in just 20 minutes. With its peaceful smile and round shape, Kana is perfect for your desk, shelf, or to carry…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
More discussion on reddit, here: https://www.reddit.com/r/3Dprinting/comments/bbzjfd/i\_3d\_printed\_a\_crossstitch\_test\_piece\_for\_a/ And here:…
Parametric Clothes Hanger Hook (Closet Hook) Hook to allow daisy-chaining of clothes hangers. Improved and parametric remix of the original by goprinttech: https://www.thingiverse.com/thing:5254835 Improvements: Smaller size for quicker…
Hier eine Tischklammer bzw. Halter für Tischdecken, die hoffentlich länger halten als die gekauften, welche nach dem 2. Mal anbringen schon zerbrechen. Gedruckt mit PLA+; das ist einerseits relativ elastisch und andererseits ziemlich zäh.
Small household equipment, perfect for windily summer days.
-Printed with standard PLA - 1 version optimal for 19-22mm table thickness - 1 version optimal for 29-32mm table thickness
Remix of the clip to hang it on a cloth line I added a stronger version.
Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.
The Tablecloth clip is made for a 22mm table but can be scaled to fit different sizes.
This is a heavy-duty version of the clothes hanger that I designed. For lightweight items like shirts etc, the standard clothes hanger is more than sufficient and uses a lot less material. These are a great way to use up spool ends or…
Keep your kitchen sink neat and organized with this sponge and cloth holder . Designed to improve drying and hygiene, it keeps cleaning items elevated, allowing better airflow and faster drying. Ideal for use next to the sink, this holder…
This is a clothes hanger for Barbie. I designed it by measuring the original one. You can see a comparison of the original and the printed one in the photos. For the logo I used https://www.thingiverse.com/thing:1152706 It has to be…
A decorative model of a car shrouded by a cloth veil. Perfect as a gift for Mini Cooper enthusiasts or car aficionados. Needs supports to print (classic supports work better than organic supports for this model). To remove the supports,…
I needed some clothes hangers so I designed these neat foldable ones which fit on a 22x22cm Ender 3 build place. No supports are needed for this print. I recommend printing it in PLA with 4 walls and 5 top and bottom layers at 0.2mm layer…
This design provides strong clamp. Just download then print and use. You don't need to add anything else. Don't forget give me a like!
needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…
Clothes rack for 1:6 scale dolls that looks realistic and elegant thanks to the combination of 3d printed sides and embedded wooden skewers. I recommend for assembly 10 pieces of ordinary skewers (diameter 3 millimeters), shortened to 15…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![IKEA Pax Kleiderstangenhalter [Clothes rod holder]](https://media.printables.com/media/prints/10395/images/86352_da05d17d-0974-48e4-ab49-c5e30a91a323/ikea_pax_10395.jpg)
