62 modeli
This model is free. If you appreciate this model, please leave a download and a like! A coin is printed in only 32 minutes! A coin for the yearly Scouting JOTA-JOTI. Update for 2024. You can print this in two parts with a color change at…
Maker coin benchy, nothing else Scaling up a bit is recommended.
Lesson Plan & Activity: All coins must be made from an initial revolve, resulting in a coin that is 6cm in diameter and 1.25cm in thickness. Must not require ANY supports. It should be gear-esque in nature. NO moving parts (no gyroscopes,…
INDX × Prusa Collector Coin — 8-Color Multi-Material A custom-designed collector coin featuring the INDX logo on one side and the iconic Prusa logo on the reverse. Printed in 8 colors for a vibrant, eye-catching result that looks great on…
designed in fusion 360 with multicolor in mind.
Just another makercoin I made, this time a lion. Prints fine in 0.2mm w/o supports and any material. Its one hell of a good stringing test as well
This is a simple MakerCoin starter. I wanted to make something like a Challenge coin for one of my favorite Crypto projects. Also a learning experience for me with Fusion360. I have uploaded the Fusion360 files as well grab them as a good…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fVPANgI8TL0 Print instructions Licence: Creative Commons - Attribution - Share Alike Category: 3D Printing
This fidget spinner is based on a maker coin. I designed this cool fidget spinner in SolidWorks (it was my first design in Solidworks). To spin this fidget you do not need anything except a 22x8x7 bearing. You can create your own caps by…
Constraints All coins must be made from an initial revolve resulting in a coin that is 6cm in diameter and 1.25cm in thickness. Must not require ANY supports, (no supports). Should be gear-esque in nature. NO moving parts, (no gyroscopes,…
Wanted a something to hand out at ERRF and realized I hadn't made a maker coin yet. Didn't want the kiddies getting their fingers stuck in gap, so I printed the first layer translucent and the rest in color changing. Print instructions…
The Objective: The aim of this project was to create my own makercoin. I had multiple constraints: The design needed to be 6 cm in diameter and 1.25 cm thick. Be “gear-esque,” and have no moving parts. Require no supports and must slope…
Makercoin Report Summary Section: Given the constraints, I wanted to create a makercoin reminiscent of a gear. I also wanted to incorporate the concept that if you had multiple makercoins, they could intermesh and actually function as…
the BECOME maker coin for anyone who wants one
My Own Makercoin Used the blank makercoin from https://www.thingiverse.com/thing:2944588
From Hackers (1995) this is the smiley that appears in the movie. Its dimensioned the same as a makercoin / makerchip (40 x 4mm). STEP + 3MF files included.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fgpVBsDG2fZ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 30 Category: 3D Printing
Watch the video to learn how to model one of these in Fusion360 or FreeCAD!
just a little makercoin for anyone to print and/or remix
Settings: Supports enabled Brim or raft.
This is my second attempt at creating a makercoin. This was designed in Fusion360 Category: 3D Printing
Summary The design is of a MakerCoin. My own MakerCoin! A MakerCoin is a little round object like this one, and its purpose is twofold. First, a signature of sorts, that is clearly identifiable as being associated with its creator. Like a…
A Polymaker themed makercoin for a contest. It is 35mm in diameter. The thin sections and chamfers make good impromptu cooling tests.
A maker coin i probably just edited like 6 years ago, s I can't really remember. This post is mostly just to archive it
simple version is recommended for fdm printers as the normal version risks clogs Initial sketch used for revolve. Curve is more extreme on the bottom to allow for no support material. Initial revolve Front drawing. Used a new plane…
This is my shot for a maker coin. The fish is a Hake, which has been my logo for a long time. Nothing religious, it's from a bad joke that only translates in Spanish, sorry (ツ) /. This should be fairly easy to print. No supports needed,…
My very first “MakerCoin”. Nothing special. I just wanted to share (an show) it :-) Printed on the workhorse Prusa i3 MK3 Resolution: 0.2mm Infill: 15% Supports: no Filament: Aprinta Gold
testing out my abilities on Fusion, decided it was time to give a maker coin a shot. here it is! Category: Other
The MakerCoin is meant to be a go-to test print for new filaments. The custom nature of the print means there are lots of possibilities in terms of design. The constraints of the task meant limitations on size, 6cm in length and 1.25cm in…
My Makercoin. Holds two polarizing filters and allows the center part to rotate.
I have made these makercoins for our facebook group that have reached recently 100 members. They have asked me if i would made these for the group :D If you need a makercoin or i should edit this or add some more you can contact me. My…
Makercoin based on the plinko coin from the livestream
this is my first model a makercoin i know its not good but i hope that in a few years i see this and think wow i was bad
I got bored so I updated my maker coin
My first FreeCAD model. Central part from my icon/logo model, edge made in FreeCAD based on other Makercoins. Tests: Bed adhesion (central part will slide otherwise) Overhangs Curves Printed with a Creality Ender 3 with FlashForge black PLA
Full credit to Makers Muse for the original Makercoin design.
This is a simple makercoin for customization
This is a shelf rack for makercoins. My favorite Makercoin is this one: https://www.thingiverse.com/thing:2169604 So much so, that I use it for filament testing and samples! I wanted a way to organize/show the coins rather than just stack…
My first attempt to design something useless in Fusion360. I use it to test my printer settings for different Filament and color samples.
using 3mf files they fit perfect on the plate they print together with a working hinge fold it up at 90 degrees and use a flashlight to project the message happy Halloween
Outer dimensions follow maker coin rules, 40mm Dia, 3mm Tall Small bite missing (I got hungry, needed snacks).
The CaliCoin! An all new 3d printer calibration and quality test! Tests for… Curved surface stair-stepping, depress quality, dimensional accuracy, overhangs on all axes, and more!! Unfortunately I was unable to print this because I…
My version of a Maker Coin. My first upload and one of my first self-created 3D models – everyone has to start somewhere. Can be printed with any desired settings.
A makercoin featuring my Mii character. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament PLA Green Category: Coins & Badges
Summery Continued: Even if you haven't most people would probably recognize the giant worms that come from the sand of the desert planet. This maker coin is meant to bring these worms to life and demonstrate what a 3-d printer can do! The…
I present to you my submission to the Polymaker Makercoin contest.
You might want supports on the bottom.
Makercoin: For Art Space art therapy studio. To celebrate the Heart of Concord event 60mm x 8mm = 1 hour = 13 grams of filament 100mm x 8mm = 2 hours The edge of the coin has a 2mm peg so the coin can be printed on support material. I…
I remade a design I made years ago using Creo CAD. I use Onshape now. It was easier to start over (the right way this time) than to fix the old file in the old app. Print the Top and Bottom files, then glue the ½ coins together for better…
Lesson plan and activity: All coins must be made from an initial revolve resulting in a coin that is 6cm in diameter and 1.25cm in thickness. Exceptions can be made if justified and approved Must not require ANY supports (no supports).…
Mein Makercoin LiRo mit das mach ich morgen fertig. Multicolor druck Support: Nein Brim: Nein
Lesson Plan and Activity: For this project, I was tasked with designing and creating my own MakerCoin design. The MakerCoin was constrained to the following requirements: All coins must be made from an initial revolve resulting in a coin…
Lesson plan and activity: All coins must be made from an initial revolve resulting in a coin that is 6cm in diameter and 1.25cm in thickness. Exceptions can be made if justified and approved Must not require ANY supports (no supports).…
INDX × Prusa Collector Coin — 8-Color Multi-Material A custom-designed collector coin featuring the INDX logo on one side and the iconic Prusa logo on the reverse. Printed in 8 colors for a vibrant, eye-catching result that looks great on…
