Liczymy pasujące modele…
Mathematical Art: The Inverted Oloid Overview This model is a unique take on the Oloid , a three-dimensional curved geometric object discovered by Paul Schatz in 1929. Unlike a standard solid oloid, this inverted oloid features a…
UPDATED I beefed up the limbs a little to increase strength, also added a hole for a bolt to go through the middle leg as this part kept splitting at the layer lines. Print middle leg upright with foot on build plate and left and right…
The Gömböc is a fascinating mathematical object with a unique geometric property: it has only one stable equilibrium point and one unstable equilibrium point. This means that when placed on a flat surface, it will always return to its…
UPDATE (2024/02/04) Updated all models AND added models as requested See: https://www.printables.com/model/750767-mathews-trx-series-grip-_updated-and-added-models/files ***************************** I made a simple replacement grip for…
So my kids had these Mathlink cubes that are matching Numberblocks characters and as they keep playing they would need some more blocks. I designed new blocks, compatible with the Mathlink, but with slight variations: Separate joint piece…
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
A simple mechanical calculator powered by gravity and trigonometry! Either when teaching a child to do basic addition and subtraction, or when explaining more complex concepts to a physics class, like center of mass and mechanical…
[Updated 2025-10-02: released additional part: “1-7 pie", a requested missing fraction for the set, description updated.] [Updated 2024-10-14: released versions: “blank lid, symbol lid, fraction circles lid, circle fractions lid” ,…
This is a Mobius strip with an arrow which can travel around to show you that the Mobius strip is a nonorientable surface. When the arrow comes back to the original location, it's flipped! Read more about (non)-orientable surfaces on…
One of my kids loves Numberblocks and has several sets of Numberblock themed MathLink cubes. The included snap-in face plates only go up to 20, so I designed a 3D model to print more. These allow faces to be drawn or stickers to be placed…
Hier kommt ein ganz besonderes Tool für kleine und große Mathematik-Fans: Unsere Fidget Spinner mit 5,5 cm Durchmesser vereinen Spaß und Lernen auf coole Art und Weise! ✨ Die Spinner decken alle vier Grundrechenarten ab – Addition,…
Manipulatives representing different angles that can be used to measure, compare and combine angles. For primary school.
Dienes cubes created for my daughter to help her with maths. There is also a storage box that can store all of the counting cubes apart from the 100x100. Print instructions Print in PLA wit little infill and 3 perimeters
Introduction This Spiraling Mathematical Drawing Toy has mathematical features. It has a pen hole on the tip of a gear tooth which is located at the pitch radius of the virtual circle. All gears fit together in every way. All pen holes…
The design in question is for an extension or add-on accessory for a caliper, known as a radius finder . This tool is specifically engineered to measure circumferences that are beyond the reach of the caliper's existing jaws, due to their…
Learn through play! 🧮 These Number Blocks make math fun and tangible for kids. Perfect for preschool, elementary classrooms, or homeschooling activities. ✨ Features 🔢 Teaches counting, addition, subtraction , and number recognition 🧠…
This 3D printed game is a family mathematic game, a tool for children to learn basic mathematic functions through play. It also encourages children's interest in learning! It can likewise improve memory of the elderly. I had originally…
Created to help the child gain knowledge about fractions. Introduction to the concept and notation of fractions. Sensorial exploration of equivalency among fraction. Introduction to simple operations. Can be also used as a toy for younger…
UPDATE oct 22th , 2025: Check out new folder with updated files, requested files… *********** Must be printed with supports on the the build plate for the base. No other supports needed. BASIC GRIP is just a slim grip with the preferred…
Introducing a truly exceptional tool for math enthusiasts of all ages: Our 5.5 cm diameter fidget spinners cleverly combine fun and learning! ✨ These spinners encompass all four fundamental arithmetic operations – addition, subtraction,…
***NO SUPPORTS REQUIRED FOR ANY OF THE PARTS.*** To assemble, place the flip tabs upright in the game base and feed a piece of filament through the game base mounts and the flip tabs. Try to straighten out the filament somewhat before…
Feed the robot any plate with the calculation on top into the upper slot and the robot will return it with the solution on top. Print in this order to play already during printing the other parts: Math Robot 10x1 .. 10x10 Plate box Print…
By request: Archery Pocket Quiver with Mathews Logo. 8 mm and 11 mm is the diameter of the holes for arrows. For outdoor/3D you may use thin arrows so take 8 mm, for Indoor arrows or thick arrows take 11 mm. Other designs: Martin Archery:…
One of my kids loves Numberblocks and has several sets of Numberblock themed MathLink cubes. I've designed extra snap-in face plates, links, and tools. Those models are better than this one… I attempted to create additional number plates…
Explore mathematical concepts the Montessori way with this set comprising 10 varying-length rods representing numbers 1-10. Notches on the rods facilitate counting units, aiding in visualizing place value and decomposing numbers within…
I did these for my wifes school class. Printed them in PLA with a layerchange for the last 2 layers, for the numbers. it depends a little on the filament but with the blue one there were loose at once. The tricolour was a little tighter.…
A simple and effective tool to teach or learn about math fractions ,perfect for kids Math for clarity or for visual learners (print in different colors for clarity). printed with 15% infill No supports required! 120mm radius
As previous model. Must be printed with supports. Any filament will do. Version 3.4 is the slimmest version, as seen in the picture. Version 3.3 is a thad thicker.
One of my kids loves Numberblocks and has several sets of Numberblock themed MathLink cubes. One link per cube isn't enough to keep larger models stable. So, I designed additional ‘links’ to snap in and create additional connection points.
This round theme is tiny and mighty — these beads are all around math solids! In this collection you will find: All Five Platonic Solids : Tetrahedron Cube Octahedron Dodecahedron Icosahedron And some of their Archimedian Solid…
[FR] Kit de matériel de manipulation de base 10 pour l'apprentissage de la numération et de la décomposition centaines, dizaines, unités. Inspiré de produits déjà existants dans le commerce, ce kit a pour avantage de mieux faire percevoir…
This math game has dice that can be switched around for different levels of math. The easier pair of 6-sided dice and for more challenge, the 12-sided and 10-sided dice. For example, to get double digit numbers from the beginning of the…
This is a tool helping kids to understand a mathematical fractions.
Here is the model for Marshall MathBEARs. Marshall is a good Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for Marshall? maybe he can keep Barry Company. I hope you enjoy, Thanks…
🧮 Fun, hands-on way to learn math! This printable math learning puzzle helps children practice addition, subtraction, multiplication, and division in a playful and engaging way. Simply rotate the rings to create new equations and solve…
Tried to match up the grip on my V3X the best I could. The 3mf file is set up for fuzzy skin on a portion of the grip. My Fusion skills are lacking so it doesn't have the curved section for the thumb or index finger. I printed this in…
A 3D printable set of Pattern Blocks. You can learn more about pattern block here: https://en.wikipedia.org/wiki/Pattern_Blocks
The Dienes material is a mathematical tool designed for daycare center and elementary school. For a better understanding of the bundling principle (units cube, tens bars, hundreds plates and thousands cube) and the decadic number system,…
[Updated 2026-02-02: released additional part: “1-7 pie", a requested missing fraction for the set, description updated.] Notes: A compact version was made that can carry all the pie pieces in one container here:…
Just started learning about 3D printing, wanted to start with a project for my son, he loves Numberblocks and we have so many math link cubes from the Numberblock sets. Made a few tweaks, not sure if its the most effiecnt print but it fit…
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
Introducing Math Blox: A Revolutionary Approach to Learning Mathematics Unveil the joy of learning with Math Blox – an innovative set of 3D printed blocks designed to make math both fun and tangible for kids. Each block represents a…
English (This translation is computer generated): Fidgets combine fun and learning. In my remix, they cover two basic arithmetic operations – multiplication and division. They are ideal for playfully practicing multiplication and…
About the insert This is a insert/organizer for the board game Nemesis , the Aftermath extension , the medic character and all sleeved cards while still fitting in the base game box. It also stores the untold stories tokens and cards but…
A decorative set to insert into the holes of the Mathews TRX 38 compound bow (and probably TRX 40 but I don't have one). Took me less than an hour to modelize and print (so why look at similar things on archery shops for around 20€…) You…
Frisbee disc with diameter 17.5cm. No supports are needed by printing the disc upside down.
Help grow their brains! This model will help kids with the early stages of maths. Operations like addition, subtraction, and multiplication can be performed. You can print the blocks as one file and break off/trim the small connectors or…
It is an educational game developed for children trying to learn mathematical operations.
Fun inside and outside the water! These bottles have openings big enough not to trap any fingers. The different shapes and sizes along with identical spouts make them fun to stack in different orientations and see what will balance. Each…
Pythagorean Theorem Proof earrings for math nerds! a^2 + b^2 = c^2
This Award uses math symbol such as: ∑ + Category: Math
This cube is intended for learning mathematical characters.
Treat yourself and your classroom to a machine that shows you how Sine and Cosine relate to angles. There is an animation on my blog: http://swampcastle.blogspot.com/2013/11/harmonic-transformer-for-classroom.html I have also imported and…
These are two models (as of now) for you to give your teacher. English and Maths : Normal, PLA and 0.2/0.3 mm and color change as required
Hi everyone, This is a curve sketching template designed to be a learning aid when teaching functions. It includes a: circle parabola hyperbola cubic sin and cos Designed using splines in Fusion360. I wasn't able to create a…
Perfect geek/nerd clock for mathematically inclined, or engineers like me :) Made this for a fellow on Facebook's 3DP Rescue group. There are 2 versions, raised letters for single color printers and flush lettering for multi-color…
Printed 0.3 layer height 20% Infill No supports Tip: To hang, use two loops of string, connected to each other. This will stop the ornament from turning sideways.
This is a cover that fits on the"300ML Diffuser Essential Oil Diffuser" Amazon.com: 300ML Diffuser Essential Oil Diffuser Remote Control Aromatherapy Diffuser Mist Humidifiers with 7 Color LED Lights for Bedroom Office House Kitchen Yoga…
The (Almost) Mathematical Perfect Christmas Tree – Now in 3D Print! 🎄 If you thought perfect geometry and festive aesthetics don’t belong together, prepare yourself: this Christmas tree is engineered so precisely that even Pythagoras…
I needed a radius gauge, which unexpectedly turned into a small math project. Many gauges use a 90-degree angle , which results in a factor of 2.4142 … that the measured value must be multiplied by. Reducing the angle to 60 degrees…
Considering the number of parents now needing to teach their kids at home, I designed this simple model to provide a visual learning aid for addition, fractions, etc. They also double as fun play cubes for robot making etc. These could…
You can print them all by one or individually, depends on you. They can also cut clay or some other clay like things, and you can easily resize them to your needs
Card sized template that you can use to graph sin, cos, tan, cot, parabola, hiperbola and linear function. It can also be used to draw a coordinate system. All functions are in their basic state and to scale with 5mm grid paper. The…
This is a simple replacement grip for the older Mathews Legacy compound bow. I designed this for a friend and it fit great. No need for glue or anything to hold it in place. I believe he said his bow was a 2004 model but wasn't totally…
Teaching aid for helping children with addition and subtraction
An other voronoi experiment. You need to turn on support if you want to print one of these models. Category: Math Art
Can be arranged into quiz questions to help first graders learn math.
Updated 03/03/2025- Pie Crusts were updated so the pegs fit better. This fun little print is pre-plated for ease of printing. The pans are stackable with and without the pie. No supports are needed. Filament used- Polymaker Silk Silver…
Use these to teach fractions, decimals, and percentages. Print 10 tenths, 8 eighths, and so on. Printing Tips: PLA or PETG print great, no supports needed. Print with 0.2mm layers, and do a color change in the middle so the text shows up.…
This Montessori math block set is a hands-on educational tool designed to enhance children’s autonomous learning of basic math concepts. Each block’s height represents its numerical value, allowing children to visualize and compare…
There are AMS and non AMS .3mf files. Best opened in Bambustudio or Orcaslicer. For the non AMS/MMS Version you have to add a pause at layer 11 (2,2mm) to swap filaments. Boxes are stackable so you only need one cover per stack, not per…
This is a remix of Thyn's Radius Gauge for calipers. Initially I just added some nice fillets and made sure it fitted my plastic calipers and when I tried it I saw that a 38mm diameter cylinder yields a measurement of 7.9mm. Multiply by…
Chess pieces designed to look like math symbols. Sized for a standard tournament chess board. King = Omega Queen = Infinity Rook = Pi Bishop = Multiplication symbol Knight = Sum symbol Pawn = Plus symbol Supports needed for some pieces. I…
Hi everyone, This is a parabola sketching template designed to be a learning aid when teaching parabolas and quadratics. It includes a: parabola Designed using splines in Fusion360. How do I use this as a teacher? Students often struggle…
A medal for the math lords! If you enjoy this project, please consider following me and joining my supporter tier to help keep my free models coming! Be sure to explore the remixes and check out my other models for compatible accessories…
I got the idea for this model from a YouTube video, so the principal layout isn't mine. Can't find the video for reference. The mathematics behind it is not terrible hard. But when it turns it's somehow mesmerising. As a lot of these kind…
Available sizes 100x100, 150x150, 200x200, 250x250, 300x300, 350x350 Larger sizes have more digits. How to print This is a two, three (as in my picture), or four-color print. You do not need an MMU / ERCF / AMS / IDX to print this model.…
I updated original Numicon Shapes. We dont need base board. The parts are stack on top of each other. Numicon Shapes are so clever and very helpful in teach mathematic! They are incredibly versatile, and they help children see numbers as…
Enhance your learning, design projects, or creative displays with this free 3D printable collection of numbers (0 to 9) and math symbols (+, −, =) for endless possibilities. Perfectly crafted with clean, modern geometry, these models are…
1+1=10 binary math there are 10 types of people in the world, who understand binary and who don't 1+1=10 matematica binaria ci sono 10 tipi di pesone nel modo, chi capisce il binario e chi no
Our take on the Montessori counting chains, bead, square, and cube. A good explanation of the beads is here: http://mainstschool.com/montessori-math-whats-beads/ It's important to print each number in their own color: 1 - Red 2 - Green 3…
This is a model of the mathematical object known as Gabriel's Horn ( Wikipedia article , Numberphile video ). It is a revolution around the x-axis of the equation y=1/x, from x=1 to infinity. Obviously my mk3s+ does not have an infinite…
An educational toy for children that helps them visualize simple additions. It has 10 different blocks from 1 to 10, each one with its number on it and a matching height in centimeters. The blocks are 4cm wide and 3cm deep. They stack…
This is a simple ruler featuring stencils for letters, numbers, writing, and math symbols. The ruler scale measures up to 16 cm and 6 inches . For the math stencil, I recommend using mechanical pencils or fine-tip markers for the best…
The STL models for each chess piece are sized for a standard chess board with 2.25-inch square spaces. The STL models are standard height for the respective game piece. They can be scaled down reasonably well. Some of the pieces will…
This 3D design is the perfect tool for exploring mathematical balance and the basic principles of numbers. With different weights and positions, children and students visually learn mathematical operations by balancing the scales. Solving…
As we all know, the greatest Stack Exchange page is this Mathematica one, How do I draw a pair of buttocks? . I have lovingly ported the top answer to OpenSCAD. This one requires scad-utils and skin.scad to work, but trust me, it's worth…
Print Settings use Support no Brim Number of parts in the file name Print as shown in the picture below Recommendation Superglue The cavity in the stand can also be filled with gravel or sand (optional).
My colleague - a mathematics teacher, came to me saying that she needed to print such cubes for teaching. I drew the cubes in the ProgeCAD program.
This drawing ruler or stencil allows you to draw an equalization curve through your points very easily. In addition, it features different mathematics symbol and cos(x), sen(x) and tan(x) functions graphics . Very easy and fast to print.
It is a fun, math symbol-shaped design that also functions as a pencil cup/holder. It is a great print for any math-y friend or teacher!
Who knows, knows. Who not… no need to?
This sign can be a great adition to your room/man cave. you can choose between three different mounting ways: screws magnets flat option (without holes or anything) i suggest you use the color change option in prusa slicer: Black (or some…
Math Art : Strange Attractors The intersection of mathematics and art is a fascinating field, and "strange attractors" are a prime example of this interplay. Here's a breakdown of what they are and how they relate to art: What are Strange…
