P
PrintablesJack
Adjustable MicroDrip nozzle
Flow restrictor for drip watering plants. And mist sprayer.
- Pobrania
- 794
- Polubienia
- 149
- Ocena
- 0
Wyniki wyszukiwania: microdrip
34 modeli
P
Printablesmaxmar
G3/4 thread to Gardena Microdrip Adapter (G3/4 Gewindeanschluss für Gardena Microdrip)
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
- Pobrania
- 301
- Polubienia
- 23
- Ocena
- 5
P
PrintablesSebastian T
Gardena Microdrip 13mm Tube Holder
I used these brackets to replace the M16 pipe clamps I used to attach the 13mm tubing to the greenhouse foundation. The hole in the bottom is 4.5mm. I have printed it with PETG and 4 outer walls.
- Pobrania
- 245
- Polubienia
- 27
- Ocena
- 4,5
P
Printablesirohlfs
MicroDrip 4x Distributor
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
- Pobrania
- 220
- Polubienia
- 39
- Ocena
- 0
P
PrintablesTadufeu
Gardena MicroDrip holder
To hold your sprinkler in place and/or above the plants. Because of outdoor use I suggest PETG
- Pobrania
- 217
- Polubienia
- 47
- Ocena
- 5
P
PrintablesPavel Minar
Gardena microdrip longer holder
A longer version of Gardena pipe holder
- Pobrania
- 205
- Polubienia
- 21
- Ocena
- 5
P
PrintablesYuri
End stop for Gardena microdrip system 4.6mm
Inspired by Gp2mv3's dripper. Though I remodelled it and beefed it up for a better seal.
- Pobrania
- 187
- Polubienia
- 28
- Ocena
- 5
P
Printablesirohlfs
MicroDrip 1x Distributor
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
- Pobrania
- 180
- Polubienia
- 20
- Ocena
- 5
P
Printablesirohlfs
MicroDrip (MDS) 2x Distributor
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
- Pobrania
- 164
- Polubienia
- 29
- Ocena
- 0
P
Printablesirohlfs
MicroDrip (MDS) Dual 4.6mm
A 13mm End Cap with 2 4.6 mm pipe connections One O-Rings (10.6mm x 2.7mm ) for the 13mm connection needed
- Pobrania
- 146
- Polubienia
- 16
- Ocena
- 0
P
PrintablesĽuboš Zlatohlávek
Microdrip spike connector 4mm drip tube to main tubing
Create small hole to the main tubbing with nail and than push this connector to it. Compatible with rain bird irigattion tubbing. Print flat with 100% infill and support
- Pobrania
- 125
- Polubienia
- 19
- Ocena
- 0
P
PrintablesDunderklumpen
Microdrip Adapter 1/2" for drip irrigation system
I needed a 1/2" internal thread to micro drip hose adapter with two hose connections for my drip irigation system so I remixed https://www.thingiverse.com/thing:340931 using flanges to better accommodate my micro drip hoses. The two…
- Pobrania
- 118
- Polubienia
- 22
- Ocena
- 4
P
Printablesirohlfs
Gardena Microdrip (MDS) 13mm Connector
Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)
- Pobrania
- 95
- Polubienia
- 14
- Ocena
- 0
P
Printablesniclas roth
8mm PVC Pipe to 4x 4,6mm Gardena Microdrip
Changed for 8mm PVC pipe to 4x 4,6mm Gardena Microdrip Micro
- Pobrania
- 82
- Polubienia
- 13
- Ocena
- 0
P
Printablesirohlfs
Gardena Microdrip (MDS) 13mm to QuickConnect Adapter
Gardena 13mm MDS to QuickConnect Adapter. useful as replacement for the pressure Limiter when used with low pressure water supply e.g. garden pump. 2 O rings are needed 9 mm x 1.7mm and 10.6mm x 2.7mm (As for MDS 13mm and QuickConnect)
- Pobrania
- 80
- Polubienia
- 11
- Ocena
- 0
P
Printablesnohkumado
pump kit, 1/2" to gardena microdrip 10mm connector
an adapter and a filter to screw on a 1/2" pipe thread on one side and clip into a 10mm Gardena microdrip tube on the other. I have a small solar pump that fetches water from a buried tank, and i wanted to use the microdrip tubing. The…
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 5
P
PrintablesNicerSlicer
13mm T-Edge 90° for 0.5 Inch/15mm- MicroDrip-Hose
13mm T-Edge 90° für 0.5 Inch/15mm- MicroDrip-Hose, z.B. für Gardena 15mm Versorgungsleitung
- Pobrania
- 63
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNicerSlicer
13mm corner 90° for 0.5 Inch/15mm- MicroDrip-Hose
13mm corner 90° für 0.5 Inch/15mm- MicroDrip-Hose, z.B. für Gardena 15mm Versorgungsleitung
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNickSoft
Microdrip Adapter 1/2" (to 4mm) for drip irrigation system (remix)
Remixed from Dunderklumpen's model
- Pobrania
- 58
- Polubienia
- 6
- Ocena
- 0
P
PrintablesL0ran
Gardena MicroDrip 13mm(1/2") plug cap
Print on the flat side, cylinder pointing upwards
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSuNSHiNe
Lechuza Balkonera Gardena/Rainbird Microdrip Adapter
https://www.thingiverse.com/thing:3714205 https://www.thingiverse.com/thing:2564456 aus 2 mach 1. Wenn die Last auf dem Halter durch den Wasserdruck auf dem Schlauch dann doch zu groß wird habe ich 2 kleine Löcher in der zweiten Version…
- Pobrania
- 39
- Polubienia
- 10
- Ocena
- 0
P
PrintablesZwirbel
Hose bridge for Gardena MicroDrip laying pipe 13 mm (1/2")
I had to cross a foot path on my front door and needed a hose bridge to keep the hose in place. Length is 24 cm to fit with Prusa MK3. Printed with PETG to better withstand weather conditions. Snaps in place on the hose. I have included…
- Pobrania
- 37
- Polubienia
- 9
- Ocena
- 0
P
Printableshaden
13mm to 4 mm microdrip
Adaptor to attach submersible pump to Gardena 4mm microdrip system pump is is a cheap chinese pump like this:
- Pobrania
- 36
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJan Chlebek
Microdrip connector 4.6mm
Just ran out of connector pieces so made my own. Recommended to print in PETG and 4-5 perimeters (100% infill) for durability.
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMichael Hächler
Gardena 4.6 mm Tube Microdrip Dripper Reinforcement
My microdrippers keep popping out of the 4.6 mm tube even though it's a new original tube and I'm using an original A2000 pressure reducer. The new recipie for a softer 4.6 mm tube worsened the problems. This solution involves placing a…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNorbert Slivka
Gardena microdrip master unit mount
A simple vertical mount for "Gardena Master Unit 1000". Mounting screws: 2x countersunk 4x40 wood screw (4mm diameter, choose length based on your base) Print settings: PETG 4 perimeters no supports required
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNucuLabs
Raised Bed Hook For Microdrip Pipe
A simple raised bed hook for microdrip pipe. Raised bed wall diameter is 25mm, this clip fits the wall. The pipe diameter is 6mm.
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
Printablestomatis
Gardena Microdrip Hose step protection channel
Cable step protection channel, the application shown is scaled with almost double width (33->60mm) # Printinfos * Printprofile: MK4S IS 0.25mm Structural (with MMU3) * Nozzle: 0.4mm (Prusa HFO) * Material: Prusament PETG * Supports: none…
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarc
Gardena microdrip 13mm tube clamp/holder
Secures a 13mm tube. The tube will not slip out. I used the model to securely route a gardena microdrip 13mm (innerdiameter) from my terrace one floor down. It uses four m4 screws with hexagon nuts and two countersunk wood screws. Use at…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMarc
Gardena microdrip 13mm tube holder using double-sided adhesive tape and zipties
I used this model to secure the routing of a Gardena 13mm (innerdiameter) tube. The holder is attached with double-sided adhesive tape (width 19mm) and the tube is attached with two zipties (width 4,8mm). Use at your own risk. This 3D…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printables
Gardena 4.6 mm Tube Microdrip Dripper Reinforcement
My microdrippers keep popping out of the 4.6 mm tube even though it's a new original tube and I'm using an original A2000 pressure reducer. The new recipie for a softer 4.6 mm tube worsened the problems. This solution involves placing a…
P
Printables
Microdrip Adapter 1/2" (to 4mm) for drip irrigation system (remix)
Remixed from Dunderklumpen's model
P
Printables
Gardena microdrip 13mm tube clamp/holder
Secures a 13mm tube. The tube will not slip out. I used the model to securely route a gardena microdrip 13mm (innerdiameter) from my terrace one floor down. It uses four m4 screws with hexagon nuts and two countersunk wood screws.
P
Printables
Gardena microdrip 13mm tube holder using double-sided adhesive tape and zipties
I used this model to secure the routing of a Gardena 13mm (innerdiameter) tube. The holder is attached with double-sided adhesive tape (width 19mm) and the tube is attached with two zipties (width 4,8mm).