41 modeli
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
A holder for the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ) wich fits the Hex Wall (Honeycomb Wall) but also the XL (with hammerhead nuts) and also can be fastened with screws to a wall. I used…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
I print Build Plate Cleaner Microfiber Holder from K-Studio.ca and i cant find way to put off so i make a holder crew on wall to make a good and accessible reach Its print with PLA 2 walls print, time around 50 min with no support
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Simple holster with a pocket fitting a ø20x5 mm magnet to store the Build Plate Cleaner by @kstudioca_1569715. Top and bottom layers are not strictly necessary. Check out my short and longer magnetic knobs here .
Just a knob with an inlaid magnet to store the Build Plate Cleaner by @kstudioca_1569715 against a metallic wall or the printer enclosure. Neodym magnet: ø10x5 mm Update 20240401: Increased tolerance settings for the thread…
Gridfinity adapter for the Build Plate Cleaner Microfiber Holder. Download the separate file https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder and scale it to 125% or 123% if you want some wiggle room Enjoy
Simple bed cleaner for your build plate. 3 parts
A holder for the "Build Plate Cleaner Microfiber Holder" [ https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ] that attaches to the side of the Prusa Core One/+. Materials The holder attaches with 3x Ø10x3mm…
I made a bigger tray with spikes instead of ribs to hold the cleaning tool. I was finding the regular tray stuck to the pad too much. I have one version with a screw hole (#6 or M3.5) and one without. The actual holder can be found here:…
A pack of remixed knobs for @K-Studio.ca excellent Build Plate Cleaner Microfiber Holder. I contacted K-Studio.ca and have permission to share this. https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder these knobs…
Updated March 2026 - they changed the mop style and it's slightly thicker
A simple, no‑mess tool for cleaning your build plate with a microfiber cloth. Spray a little isopropanol (IPA) onto the microfiber pad, press, and wipe — a clean bed in seconds. A clean build plate means better adhesion, fewer wasted…
MAKE SURE TO MAKE IT A LITTLE BIT BIGGER TO FIT THE TOWEL COMFORTABLY
I made a spray bottle holder for my alcohol that I spray on my build plate to keep it clean, but I also wanted to make a holder for the microfiber cloth that I use to wipe my build plate. I designed this to fit the Microfiber Cloth Holder…
Knob Mod for the “Build Plate Cleaner Microfiber Holder“ from K-Studio wich can hold 10mm round Neodyms.
I recently downloaded and printed a build plate cleaner which works very well from @kstudioca_1569715: Build Plater Cleaner But I had it hanging around or on top of my printer, and I wanted to have a way to keep it safe and organised, so…
Compact design for dispensing clean and holding used microfiber facial pads. Top is removable for dumping in the laundry
Holds a microfiber cloth to make a chalkboard eraser. Could be used for any other cloth you like. Large size; base is 100mm x 200mm and handle width is 86mm. Grooves along the side make it easier to hold, and it could be scaled down for…
Modification of the great box by Jsmaz4 to be able to put the insta360 x3 together with the Bullet Time Cord, two adapters to the gopro mount and the microfiber cloth. Recommended config: 3 perimeters, infill 15-25% (gyroid for the box…
Thank you @3Dprintfun for your Design Made for Microfiber-Cleaner from @kstudioca Made with FreeCAD 1.0.1 and the Gridfinity Workbench I uploaded the stl-Files and the FreeCAD-Drawings. Incl. the Case and the Base-Grid. Material: PETG…
A holder for the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ) to use the double-side tape to hold it to wall. More elegant version without the screw holes. If you would like to support me - you…
This is a holder for 4 microfiber cloths that you can hang on a piece of wood like i did in picture 5 and 6 the holes are 40mm and i printed it with a 0.8 nozzle so it would print a bit faster with supports (that i recommend) it printed…
Microfiber Towel Holder with Labeled Filament Slots Keep your workspace clean and organized with this custom designed microfiber towel holder, crafted specifically for makers and 3D printing enthusiasts. Designed to hold and separate…
For years I'd been burning my fingertips cleaning hot build plates by hand with isopropyl alcohol and paper towel. A short time ago, my friend TravisT https://www.printables.com/@TravisT_1216398 introduced me to K-Studio.ca's bed cleaner…
Small box that can be attached to a device with double-sided tape so that you can keep a microfiber cloth handy for wiping off a touchscreen. Can also be printed with fuzzy skin setting to provide a little texture.
This is made specifically for Build plate cleaner microfiber holder .
Like the original, requires 3 10mm x 3mm magnets. This version wont allow isopropyl alcohol to touch the print sides. Print settings: Filament: PLA/PETG/PC (pic is of PCCF, but also did PLA no problems) Infill: 15% Supports: No
While using the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ), I noticed I didn't have any where to store small bottles of water or alcohol when I wipe the plate down. Created this additional…
Created in solidworks design is relatively expensive with each cloth holder requireing 2 printed parts(cheap) 2 m3 screws/nuts(6/8mm) and 2 magnets 6x2 mm 6 being diameter and 2 being thickness, same as Gridfinitys magnet size if you were…
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
semi circle that holds a microfiber cleaning sponge to clean buildplte
Remix of wonderful https://www.printables.com/model/1347300-gridfinity-build-plate-cleaner-microfiber-holder-a Added holes for Gridfinity Refined screws. ChatGPT helped me to create a script for FreeCAD. My first model, sorry if it's made…
This is a Gridfinity bin meant to hold a microfiber cloth. You can use this cloth to clean your printer.
A simple lens wipe organizer for a desk.
This is a holder for 4 inch by 4 inch microfiber wipes, such as these https://amazon.ca/dp/B0FBGCR7BN They are used for cleaning print sheets between prints. This model has 5mm walls, and is very sturdy, whilst using a lot of material.…
I do love this microfiber cleaner by K-Studio.ca for build plate but ended up using it for my monitors instead and as I am constantly trying to declutter my desk so I decided to take cap off my monitor mount and make a little holder for…
Just a bin that holds these specific towels... or maybe other things? If you want to buy the towels, here's an amazon link .
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
A holder for the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ) to use the double-side tape to hold it to wall. More elegant version without the screw holes. If you would like to support me - you…
Updated March 2026 - they changed the mop style and it's slightly thicker
I recently downloaded and printed a build plate cleaner which works very well from @kstudioca_1569715: Build Plater Cleaner But I had it hanging around or on top of my printer, and I wanted to have a way to keep it safe and organised, so…
