Minerva McGonagall funko POP!
Print & acrylic draw
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
- Pobrania
- 224
- Polubienia
- 45
- Ocena
- 0
249 modeli
Print & acrylic draw
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Settings: Material: PLA Infill: 25% Perimeters: 3 Nozzle: 0.4 Layer heigt: 0.2 Installation: Press the motherboard screw into the holder. ( + paste it if it moves ) I fixed it in the frame with 2-sided tesa glue or 2 screws I printed it…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Nerdminer V2 click case with buttons. No tools and no screws needed. Buy printed in Brazil: https://stackbit.me/produto/nerdminer-v2-case/ June 16, 2023: fixed the click gap and minor bugs. Github project:…
Minershouse from the early 20th century from Alsdorf (Germany). The house was build for two families. It was constructed for H0-scale (1:87). Bergarbeiterhaus aus dem frühen 20. Jahrhundert aus Alsdorf (Rheinland). Das Haus wurde geplant…
These are two mesh covers to replace the original side panels of the Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners. The original side panels are completely closed and the cooling relies on the two small intake fans at the bottom of the…
This stand is designed to stack up to 5 miners of the 2.8" version. The cables can be fed trough holes on either the left or right side of the unit and run out the back, keeping it tidy. Prints without supports. Do not print at…
Stand for the NERDMINER ESP32-2432S028
Another housing for the ESP32 development board with a 240*320 pixel display. Suitable for these two boards: ESP32-2432S028R https://de.aliexpress.com/item/1005007774435209.html ESP32-2432S028 2xUSB…
This is a case for the Heltec Vision Master T190 for Nerdminer Bitcoin Mining. Has a 30mm Case fan that can be powered from the board adapter itself. Also a pedestal to allow better stability on a desk. Design allows multiple devices to…
Models of all 32 Crystal Classes (= crystallographic point groups) for teaching or practice, with spoiler-free, randomized file names. Pre-oriented for best adhesion and overhang quality. There are no overlaps with the other sets, you can…
Might need supports, depending on your printer's capability.
Armed with a trusty pickaxe and lantern, the Miner Gnome is ready to explore the darkest tunnels in search of hidden treasures. His determined expression, detailed gear, and sturdy stance make him a perfect addition to fantasy villages,…
BOM: 1. 4 nos. FHCS M3x10 2. 4 nos. 8mm anti slip silicone bumper (optional)
Update: Added v12 with improved buttons for easier button presses. A print-in-place hinged case for the NerdMiner aka T-Display S3 that resembles an old-timey alarm clock. Insert the Display with the USB-C side first and slide it in place…
3D Printed Motherboard Stand: Introducing My latest addition a meticulously designed motherboard (MB) stand, perfect for CPU miners Or open PC frame. This stand isn't just a functional piece; it's a testament to thoughtful design and…
This is a 180mm x 200mm x 35mm spacer that fits the Iceriver Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners. By lifting up the miner the two intake fans at the bottom improve airflow and the whole metal case has improved heat…
Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…
This air duct for the Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners is designed for mounting an external 120mm fan to lower operating temperatures in devices that are significantly overclocked. To install, the side panel is…
Need a stand for your sphere or mineral specimen? Try these! The sphere stands are in two sizes. Small is good for spheres up to about 2" diameter. For 2" or larger, go for the medium. The specimen stand is modeled after a carved wooden…
These are two mesh covers to replace the original side panels of the Iceriver KS0 Kaspa miner. The original side panels are completely closed and the cooling relies on the two small intake fans at the bottom of the case. Warm air only has…
1st of many characters I have in the works to release to the 3d printing community. This is my interpretation of a bitcoin miner with a double shovel unearthing some bitcoin. You can print out some bitcoins to put at the base or buy some…
I designed this retro tv as a case for my NerdMiner V2 from makerversum. It is designed for the regular case with the size of 65 mm x 35 mm x 39 mm. It has openings on the side to allow air exchange. It consits of 8 pieces: 3 switchs 1…
Infill 20% Minimal support needed (for the USB slot - use paint-on support if possible). The letters don't need support.
Infill 15% (gyroid). No support needed.
lamp_chimney_print_spiral => set up spiral mode Detail: https://ishigame-machine-technology.net/IMT/archives/2372 movie: https://youtube.com/shorts/UU4P1H1pf7Y
A simple desktop stand for your Nerd miner/One shot Miner ESP32 with acrylic housing. This will hold a miner with the following dimensions: 1.5cm Depth x 86cm Length 2.8" Screen version 5 Rig Miner version available here:…
We have produced STL files for you to print at home on your own 3D printer a 16 Ton mineral wagon. It has 3 opening doors for you to unload your coal or whatever you are transporting around. The files are scaled for Gauge 1(1/32 scale)…
I love the game Dice Miner . After hours of playing the standard cardboard mountain starting falling apart. I discovered that there was a Deluxe Edition Dice Miner that had a molded plastic mountain. Sadly, it was a limited time run and…
Mineral water holder for Qbrick box by inserting it into the original connector. Printed from PETG material, nozzle 0.4mm, layer 0.2mm, infil 15% gydroid
Case with display mount - LILYGO® T-Display-S3 ESP32-S3 and LILYGO® T-Display-S3 AMOLED ESP32-S3
No supports required for everything apart from the screw. Filler may be required of the inside if you don't use supports, but it is not necessary. The screw needs minimal supports for the handle.
This is a case for your ESP32 device. Works only for 2.8" screen version You will need 4 x M3 x 12mm screws. It is designed to work with several different variants of the 2.8" screen version.
This Model is inspired from this Thingiverse Model: https://www.thingiverse.com/thing:5771853 I have made the whole Model from scratch and improved it for my purposes. Check it out! Alternatively you can also screw some 140mm Fans from…
A sturdy dwarf miner with a pickaxe resting on his shoulder, standing on rocky ground. One-piece solid figure for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Simple desktop stand for the One Shot Miner. The miner goes by a few names depending on where you find it. For example here . Very simple model. I chose PETG but anything is probably fine. 15% infill.
Miners house from Alsdorf (Germany). Build in the early 20th century. The model was designed für H0-scale (1:87).
4 slot solo miner caddy to keep your electronic lottery tickets organized
Printed .4mm nozzle, .2mm layer height. Loose tolerance for easy bottle removal. My cheap brush that's included had a smashed up handle, so tolerances might be off for brush.
Can be printed in any resolution basically. Used 0.8 nozzle with 0.32mm layer height Created to be used with original cardboard insert existing in the box. I strongly suggest to put under that one of the punchboards, so It can stay…
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
Searched for a x4 Case there was no one so I Remixed this one that can fit x4 Nerdminer
This custom side panel replaces the original on the Lucky Miner LV07, allowing for the installation of the quiet yet powerful Noctua NF-A6x25 fan. This upgrade involves removing the original fan and mounting the Noctua NF-A6x25 in its…
Ständer für 2 Nerdminer V2 56 kh/s mit 2.8" Bildschirm Bohrungen für M2 Gewindeeinsätze und Aussparung für Druckschalter hinten Benötigt zusätzlich 8 M2 Gewindeeinsätze zum Einschmelzen und 8 M2x20 Schrauben
Having seen cool stands for globes such as: https://www.amazon.com/Diameter-Printed-Yellow-Control-6inch-11Inch/dp/B078XRK9GQ I searched for one on thingverse. I found the originator from momomona was what I wanted, but had difficulty…
Added a stand to a 40mm fan box and changed the air flow from down to up from the bottom of a Nerd miner sitting on it. Cools it off and gets a slightly higher hash rate.
Miners House from the former coalmine Anna in Alsdorf (Germany). The house was built for four families. Built in 1880 Bergarbeiterhaus aus einer Siedlung der ehemaligen Grube Anna in Alsdorf (Rheinland). Das Haus war konzipiert für vier…
English version: Welcome to the Fan Upgrade Kit for the Antminer L3/L3+! These high-quality 3D print files allow you to replace the original fans of your Antminer L3/L3+ with a powerful 200mm fan. With this upgrade, you can improve the…
This is the updated version of the 90 to 120 mm fans duct adaptor. A number of people asked if I could make a version of the duct with side vent to cool the voltage regulators. on the Bitaxe NerdOCTaxe bitcoin miner. The miner can be…
Description: This 3D-printed adapter allows you to mount a 140mm fan in a 120mm fan slot, providing better cooling performance for your KS0 PRO miner. Designed for easy installation and a secure fit, this adapter ensures optimal airflow…
Miners House from the former coalmine Anna in Alsdorf (Germany). The house was built for two families. Bergarbeiterhaus aus einer Siedlung der ehemaligen Grube Anna in Alsdorf (Rheinland). Das Haus war konzipiert für zwei Familien. Die…
This model is designed similar to commonly found crystal, mineral, gem, and rock tokens found in several popular board games and also used as vase fillers. These are 10x10x14mm. To get less air capture in transparent filaments, and…
Simple wedge base with mounting for a 9015 fan. Getting some airflow over the back of the board helps greatly for managing the heat load. Requires 9 M3 heat set inserts, 4.5x5.7mm size.
Harry Potter - Minerva McGonagall's Wand 3D printable model.
Miner, the school mascot for Linton Indiana High School. This model was created as a favor to a Maker who follows my work. The model is based on a single picture that was provided (see below). He has already made a few copies of the model…
Nerdminer 2 LILYGO S3 ESP32 Bitcoin Case Stand
Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3 and its Power Supply. With this flange you can easily hang it on the wall or anywhere else. Creality Cloud…
Hi all, this is a vase I made to look similar to, or at least evoke, a Quartz crystal. What really make this vase interesting to me is that it manipulates the FDM process to produce effects. At 0.24mm and higher, the top layers of the…
Stand for minerals, stones, memorabilia. Universal size.
This is a case I worked up for the large-screen versions of NerdMiner's. The model files include a case, stand, buttons, and caps for the rear ports. It installs over the acrylic case usually supplied with the NerdMiner. The only other…
The Bitaxe NerdOCTaxe bitcoin miner can be significantly over clocked however the 90mm are not up to the task of moving enough air to keep things cool. Additionally 90mm fans are way too loud, unless you want a sever room vibe in your…
This thing helps to mount the PSU on top of a Bitmain Antminer L3+. That helps to put more miners on a shelf ans protects the cables. Use tie-wraps to secure the PSU. The .gcode File is for Prusa I3MK3 printer in PLA for 2 Mounts You can…
Used openscad to create the design. You can change the code for other sizes of the compartments. Hinge works by inserting a tiny piece of filament and then glue or melt into place. The transparent part of the lid is with acrylic glass /…
The purpose of this contraption is for easy manipulation and moving around of a US Coin (Quarter, Dime, Nickel, and Penny) under a USB microscope setup. You can also view an edge of a coin by sticking the coin in the rectangular hole.…
I saw Nomad's model and appreciated the simple design. I remixed it to accommodate a 120ml Vision Miner Nano Polymer bottle, brush, plastic razor blade holder, deburring tool, and spatula. In V1, I left in the Bambu Labs glue stick. For…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized 3D-printed figurine inspired by Professor…
Cooling fans 2x120mm to one pipe of f200mm duct Print in PETG
Horror Titans - The Miner - My Bloody Valentine
Germination seed tray with air holes. Seed tray have 15 holes. If it's too small for you, you can cut it and add more holes fits perfectly with mineral wool plugs !!!
Hallo zusammen, hierbei handelt es sich um eine Halterung für 5 - NerdMiner v2 (Lilygo T-Display-S3). Die Anzahl kann durch Erhöhung der Säulen erweitert werden. Min. 15% Infill Es wurden USB-C Kabel der Firma RAVIAD verwendet: RAVIAD USB…
Ständer für 3 Nerdminer T-HMI mit 2.8" Bildschirm Bohrungen für M2 Gewindeeinsätze müssen nach Bedarf gemacht werden (im Slicer oder mit Bohrmaschine) Benötigt zusätzlich M2 Gewindeeinsätze zum Einschmelzen und 8 M2x20 Schrauben nach…
The full-size model is printable on the Prusa Mini+ in multiple parts. The two body halves can be printed with very few supports. The hands and pickaxe are printed separately. The rectangular tab is used to connect both miner halves. The…
Simple wall mount for the RAK hotspot miner
this is a simple and easy to print stand for a NMMiner (NerdMiner)
Enclosure for a single Antminer X19 Hashboard. Minimalistic Enclosure for a Single Ant-miner X19 Hash-board. DO YOUR RESEARCH!! Make sure filament can handle and support temperatures being created. FILAMENTS NEEDS TO BE HIGH TEMPERATURE…
The pressure barrier for the blackbox when using the whatsminers blocks the PSU exhaust fans, unless bent. This piece is designed to fit over the existing fans, using the existing fan screws and simply extend the air channel. This allows…
Cambrian lantern ,Miners lamp. Please print the lamp globe in spiral mode. Detail: https://ishigame-machine-technology.net/IMT/archives/2709 https://youtube.com/shorts/r5ilUXAySEw Print Settings Printer: P802M Rafts: No Supports: No…
Designed this to mount an RP SMA helium hotspot miner Antenna outside. Suggest uv resistive printing materials such as ASA. Covered mine with epoxy at the corners to support the antenna more. Stuck a command strip to the back and one on…
Print 4 pieces fron ABS or PETG and use long enough zip tie.
A quick-to-print, simple, integrated holder for the brush included with the 100ml and 120ml bottles of Vision Miner's Nano Polymer Adhesive. Fits around the lip on the neck of the bottle. The brush holder grips the brush while also…
Der Zahnbürstenhalter und die benötigten Vorrichtungen wurden während eines Twitch Streams entworfen, modelliert und am Ende auch geformt. Mann kann den einfachen Weg gehen und Ihn einfach drucken oder man baut sich Vorrichtungen, um den…
This custom-designed case is perfect for housing the Lilygo TTGO 1.14 inch TFT display, specifically designed for devices running NerdMiner. It provides a snug and secure fit, keeping your components protected while maintaining full…
Warcraft Rumble - Dark Iron Miner, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
More models available at https://29flodigital.etsy.com If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at…
The Minerva becomes available in the later stages of the game once you break into G6 space. As an Explorer, it holds a combat triangle advantage over Interceptors but is weaker against Battleships. Attribute Detail Ship Class Explorer…
REVISED! This is a free STL to use for prints for you my fellow miners. This is not intended for resellers or vendors to use. If you don't have a 3D printer contact me and I will see what we can do to get it to you as inexpensive as…
I designed this enclosure so that I can mount my Helium hotspot outside. This miner (Finestra) is an “indoor” hotspot, but I bought a 15 cable and 5.8dbi antenna. Printed in PETG (my first successful PETG project) with .4mm nozzle on a…
I love Dice Miner, but I don't love how you have to take apart the mountain to make it fit back in the box, so I created a more compact version that works exactly as the original does, but it fits in the box with all other components,…
It looks amazing printed in a silk material!
A replica of the War-hammer carried by Mineralogy student Nagi on her adventures to collect rocks. Assemble around a 24" (609.6mm) long .5" (12.7mm) diameter wooden dowel for strength. Grip is split in two for ease of printing. The two…
Housing for 50mm and 60mm cooler for Bitcoin miner GekkoScience COMPAC F.