663 modeli
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
The remover has no blade it uses some little PETG teeth as a saw. You can print the handle and the remover in different colours and after that you can screw both parts together. The 10 mm screw ist well protectet. It is a PETG "appliance"…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to print with a 0.4 mm nozzle at a 0.1 mm layer height.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Remover Tool for Snap Rivet - Fastener - Retainer Clip Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hand Tools
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
EN: Since the relatively delicate cable clip on my electric lawn mower often broke, I scanned one that had been glued together using a normal flatbed scanner and made myself a wider, more stable version. Since I wanted to spend as little…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Need to know Gently heat the marked area. Bend to the desired angle. Allow it to cool completely. Ready to use.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ever had the problem of removing a inner pot out of an outer pot to check the waterlevel? This is your problem solver. With THE POT REMOVER you can easily handle your pots. Under files you find two print options. Number one…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Made this to make cell removing easier on my fingers and not use a metal tool and make sparks! Especially when they use rubber spacers made for the old 20r cells and put 25r cells in it. A bit tight!!
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
When punching material, it can be difficult to remove the punch from the die. I've used soft pliers, rags, etc. But I don't want to remove the punch using anything stronger/harder for fear of damaging it. So here's a clamp to quickly grip…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom-designed USB-C Apple Magic Mouse mover case. It uses the internals from this Amazon unit , which was initially built for a traditional PC mouse. That design worked fine for most optical mice, but the Apple Magic Mouse’s…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
Welcome, and thank you for choosing my model. I will provide some context for this model. This watch case remover has been specially designed for this specific watch model . Thanks to its precise fit, it fits perfectly, making it easy and…
Wydruk około 10,80 €–13,20 € nettoWstępna wycena jednego wariantu
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Tool for cleaning the usb-c connector from dirt. Lightning version:…
Pause mid-print for color change and magnet insertion. 4mm diameter, 2mm height magnets. Magnets and colors are optional - tool works just by printing as is. Recommended settings: 0.2mm nozzle 4-5 walls high infill Use the smallest layer…
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Very fast printing Sometimes when the iPhone charges poorly, it may just be dirt in the connector. This cleaning tool has helped…
In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation
PTFE Tube Remover Introducing our small PTFE Tube Remover. Engineered for effortless use, this compact device ensures a easy way to remove your PTFE tubes with its user-friendly design. *Print settings: 0.1mm layer height BENEFITS: Fast…
Just slide the tip under the green cap and lift - your strawberry is ready to eat in seconds. Perfect for kids helping in the kitchen or for prepping freshly picked berries. https://www.youtube.com/shorts/5aldie1FpRs
Also tested with other charging ports Inspired by the box openers
I was trying to find a model like this, but I couldn't find it, so I decided to make it myself. Very easy to print, Under 20 min. HOW TO USE: Gently insert at the top of the strawberry, where the crown is fixed to the strawberry. Make…
Simple keycap remover for mechanical keyboard switches. Super useful when cleaning a mechanical keyboard! Needed something to remove my "A" key for cleaning, and decided to make my own. For best printing results, set the z-seam to the…
A keycap remover is a handy tool designed to safely remove keycaps from mechanical keyboards without causing damage. It is commonly made from plastic or metal wire and is easy to use by gently pulling the keycap upward. This tool helps in…
Fishing Hook Remover Disgorge Slamatore 3 MODELS FISHING DISCHARGER
I live in Colorado, along a river, and the ticks endlessly appear on my dog, and occasionally on me. I saw the Prusa contest and knew that this would be perfect for it. Ender 3 bed can fit 32 Hole for a dog tag, or keychain. Small enough…
Simple Idea but big help! SINCE 2021 → I'm the original Inventor of this idea! Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1. *Don't push to…
Print in the same orientation as the second image. I used high quality(0.12) for this print and it worked out very well and printed fast. Bed adhesion for such a small part should not be any problem. I'm looking forward to seeing your…
UPDATED V4 (5/31/2024) I add a new version with very slightly softened shape on the inside of the “catching” part, to make it even sharper where it matters with very low layer printing height. Please read the recommended print settings…
Dust yerba mate remover (desempolvador) This is a new design [v3] of my dust yerba mate remover. The thread is assembled to be strong and unbreakable. Print Settings Printer: Kuttercraft Rafts: Doesn't Matter Supports: No Resolution: 200…
Stepper pulley remover for the K1 nd K1M stepper motors. This was designed in an effort to remove and replace the 36t pulleys on the stock steppers, this resulted in a shift that lowered the threshold of VFA from ~250mm/s to ~175mm/s. We…
An accessory for the ever-expanding selection of components for RostaP's Honeycomb Storage Wall. If you're reading this, that's probably because you've got an insert stuck in your grid, and your grid is screwed to a wall or some other…
good for removeing keycaps and really steady
rectangle 1 layer thick to test your bed adhesion and clear off residue from print bed infill-100% Supports-no Rafts-no
This tool serves two purpose: Remove printer nozzle Guide acupuncture needle to clean the nozzle passage M7 socket with ¼" square opening is required for E3D nozzle. The metal socket allow the tool to be used with nozzle while it is still…
Can be printed easily if you can't find the wheel nut cap remover of your car. This one was designed for an Opel Corsa whose caps have a small groove on the top but it could work for other caps as well. Best printed in PETG or similar for…
This Gap remover could potentially help retain more heat insight but i can already confirm that it is marginally quieter from the front with this in place. Printing / Assembly prints as single piece if placed diagonal on the bed print in…
Just 20min print, fits 180mm bed size. PLA workes perfectly.
For joint be use M5x25 bolt and M5 nut. On back of tool are hooks for rubber band or spring for autoopen. Created with OnShape: https://cad.onshape.com/documents/f7379fd6253e6e4d01654556/w/3d2e5ec4b5c0bbace10b62fe/e/28c1a4a7088cac9b70809583
This is a device that neatly trims the crimped tops off loaded 12 gauge shotgun shells. There are separate model for 20 gauge and 28 gauge. Mostly this is done to reload shot shells with the appropriate solid shotgun slug, such as the…
Scraper for removing old silicone. The front cutting angle is 30°, the rear one is 20°. Being made of plastic, the tip may bend, but you can still continue to use it by tilting it further. If you have ideas for a remix or to improve it,…
Halterung für Truma Smart Mover Fernbedienung
If someone does not want a container with a label, a container without a label is also available. The cleaners can be sharpened with a file if someone wants a sharper edge.
use at your own risk, you have a chance of this breaking off and getting stuck.
Prints in two pieces. The Hook remover frame and the sliding hook grabber. Need to remove the tiny piece in the slot at the end of the probe. Easily removed with a knife or nippers. Once both pieces are printed slide the hook probe into…
Rolex Back Remover Tool Works on my 32 mm Oyster Datejust Perpetual but not on any other sizes or styles unless you scale it up. No guarantees as the inside serration may not lock onto your watch backs' serrations. Normally you would use…
put a small drop of household oil on top of the shaft then slowly turn the screw make sure the screw is hitting the shaft and not the pulley. Requires one of the Enders long m5 and a nut. Print PLA, hot, with many walls and good 3d infill…
Printed flat it works good enough to wiggle out and swap locks between two bike racks. master key d1251, universal change key, remover key, eurolock removal key
A simple clog remover for a sink drain. About 27cm Category: Bathroom
This cherry and mirabelle plums pitter reliably removes pits and is easy to clean. It is printed in one go. No additional parts required. Enjoy cherries and sour cherries season! 🍒 After kilograms of cherries and sour cherries this cherry…
angle grinder dust remover 125/230
My printer came with resonance on the X-axis, and I was instructed to perform cleaning. With this print, it's possible to easily remove the bushing without damaging the axis or the bushing. The usage is simple, after disassembling the…
Update: I added a v2 version which should fit a bit better. Also made it a bit bigger for better usage. When I got my Insta360 x4 I was happy to receive also the protective lens cover. When attaching it I realized, this is made for…
Halter für die “Mover smart” Fernbedienung
Small but strong Tick remover printed wit Siraya tech resin mixture of Tenacious and Fast 1:6 Print directly on the flexible buildplate ( Whambam ) to get a sharp slothole to get the tick behind the head.
This is a dust remover for the Yerba Mate herb. V2: I finally got to print it! There is still room for improvement, so when I get the need to print anotherone, I'll modify it to try and keep fixing stuff. THINGS TO NOTE: Be sure that you…
Quick and easy tool to print to help with the frustration of removing the micro SD card from the DJI Mini 3. Update 12/8/22 - Slightly larger model now available.
Presta-only valve core remover. I finally got around to fixing the original issue thanks to a make by user cmh. I already knew it didn't work - but got lazy & never fixed it. I referenced: https://grabcad.com/library/presta-valve-1…
ToolHead PTFE Remover Introducing an innovative solution to remove the PTFE tube from the tool head. This product effectively pushes the button on the PTFE connector to release the PTFE tube *Print in 0.1mm BENEFITS: Fast to print Easy to…
So the original keycap remover that came with my keyboard sucks so I searched for one on all of the major 3d model sites and I couldn't find any good ones, so I got fed up and made my own, hope it helps other people with this problem too,…
material PLA
Tool to remove small floating matter like duckweed and other.
Scale to 117.5% for Rolex Sea-Dweller.
A tool for easily removing the battery from DJI Mini 3 or 4 without needing to open the drone's arms with propellers.
May have some big gaps if you put these on non-Recaros.
Makes it easy to remove key caps
Enamel pin clutch remover Overview Slide remover to take off rubber clutches from enamel pins. You can just insert the pin with clutch at the open top area with widened side opening and slide the pin to the bottom. It should slide right…
Designed to push bracelet pins for link adjustment. Print Details: Printer: Bambulab X1 Carbon Material: PLA Nozzle size: 0.4 mm Layer height: 0.08 mm (High Quality) for optimal thread resolution. Scale screws to 98% for improved thread…
Orthodontic aligners removal tool - Remover per allineatori ortodontici Now available in an enhanced ergonomic design for greater comfort and ease of use. New & Improved: Redesigned for better grip, smoother edges, and effortless aligner…
Fishing hook remover. Place the line in the slot and slide the disgorger along the line until the head on the disgorger engages with the hook. While keeping the line tight, press the hook a little into the mouth of the fish - this will…
The tool deliverd with my Seat Alhambra was crap. Therefore I designed my own, which works lika a charm. Category: Hand Tools
Printed : 0.16 mm layer height 15% Gyroid infil
A tool to remove silicone and caulk.
The Snapmaker U1 has a massive gap between the door and the chassis. This gap remover should help retain more heat inside and also reduce the noise coming from the machine with the door closed. Instructions Print in TPU. I used 95a. Print…
Tool for Clips Remover. Panel automotive doors tool I use 0.6 Nozzle for stronger part Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.3 Infill: 100% Filament: any PLA870 any Category: Hand Tools
Simple tool for releasing ptfe bowden tubes from their PC4-M10 connectors. Shaft allows access to the connectors without having to disassemble the hotend covers. Thank you to the original creator Andypw for all of your time and work.…
Tool for easy removal of the Gopro Hero 9 Lens
Tomorrowland PeopleMover Carriage
Introduction This accessory allows you to press the four clips that secure the PTFE tubes at the entrance of the extruder. Bambu Lab provides a similar accessory , and there are also various other versions available, which are more or…
Cuando la silicona de los cristales se estropea hay que cambiarla, pero antes hay que despegarla, lo cual no es fácil. Con este accesorio que he diseñado se quita muy bien, pero hay que tener cuidado, pues es muy puntiagudo. Para eliminar…
Hotend Cable Remover - X/P Series To remove the hotend assembly you need to remove 3 cables. I have developed this tool to help you remove these cables. 3 Step Removal - Each step has a number on the tool. this number should face up and…
I lost mine so I modelled one up. It's designed to slightly bend and then hook itself under the keycap. You only need to hook one end and the friction alone on the other side will give it a secure enough of a grip to remove the keycap. I…
My mother has arthritis in her hands, and is unable to grip her Ryobi battery to remove it from her battery powered pruner and battery charger. With this, you can place the battery (still attached to the tool) and press down and the…
Print this handle for your Games Workshop metal mold line remover tool to make it actually usable. No supports needed. An M3 nut and M3x10 can be used to secure the metal piece to the 3D printed handle. Stl file includes discs either end…
Was the model/idea/guide helpful? Support us on Printables . Sharing or selling our digital files is not permitted. These remain our intellectual property. To obtain permission to sell physical prints of any of our designs, please…
5 walls, 10% infill, you will need a little bit of support.
Dust yerba mate remover (desempolvador) This is a new design [v2] of my dust yerba mate remover. The thread is assembled to be strong and unbreakable. Print Settings Printer: Kuttercraft Rafts: Doesn't Matter Supports: No Resolution: 200…
Ball cup remover tool with forked openings for easy disassembly of steering and suspension components use the inside openings to adjust turnbuckles 4mm / 4.8mm / 5mm/ 5.8mm / 6mm. A dedicated set of RC tools are a must when getting into…
Просто убрал буквы/лого с моделек
Longevity-update: It has been used by my mother for nearly 3 years now to pluck ticks off of her cat, without any issues so far. —————————————————————— My mother asked me if I could 3D print a bunch of tick removers since her cat gets…
This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system
This is a custom-designed wall holder for the Powrtouch Evolution Caravan Mover Remote , specifically model PE0A2211048 AUTO (CDFMC Motor Mover). I made this because I couldn’t find a decent wall mount for the remote — so here’s a clean,…
FR Petit accessoire permettant de retirer facilement un collet d'une tête ER11. Presser d'un coté, puis presser à 180°, avec un peu d'expérience le retrait est facile, voir dans la vidéo. ENG Small accessory to easily remove a collet from…
🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😜 Have you ever lost your deburring tool right when you needed to clean up a print, only to realize a replacement from overseas will take weeks to…
I've been using and selling ianiskool's “Bowl Buddy” since 2017. I decided to redesign and make my own and then I added some additional features. Tick remover is untested. 0.2mm initial layer height then 0.08mm is what I suggest. then…
Appreciate the work of the original author, but found a few things I wanted. Original was overly large; these slim down a lot and remove all the wasted infill The makers mark text made printing sub-optimal I preferred the "wings" found on…
So... a legitimate grit guard will likely run you less money than the cost of the filament to print this one and with Amazon Prime you'll likely receive it before this print would complete. However I'm sure someone will find themselves in…
Car wheel hub bolt cap remover tool. Just slip it around the cap, squeeze and pull. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: any PLA any Notes: I used PLA,…
Usb C and lightning port cleaning tool combo. I live in a house divided. Half are Android users and half are I Phone users. I created this one tool to work for everyone. I had the best success printing this with 0.1 layer height.
![Dust yerba mate remover (desempolvador) [v3]](https://media.printables.com/media/prints/302986/images/2646736_9704869c-9ae2-4662-9ec4-7945d854a85e/large_display_1623018164747_302986.jpg)
![[V2] Despolvillador Yerba Mate / Yerba Mate dust remover](https://media.printables.com/media/prints/802080/images/7224730_40e93425-bd10-4c35-bc8f-41363f157374_d39d130c-2604-4b26-8e45-a98bce13e5cb/img_20240717_122839.jpg)
![Dust yerba mate remover (desempolvador) [v2]](https://media.printables.com/media/prints/302987/images/2646743_0689f9e8-5301-45be-85da-c3eba5bc56d2/large_display_1623017324583_302987.jpg)
