Liczymy pasujące modele…
Two lids, spacers between them, dividers to containerize them. Rest is on you. print lid 2x. spacers work 3x for me, but 2x aint hald bad either. for 2 spacers go with 2 taller dividers, for 3 spacers 2x tall, 1x low divider worked best…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Geometric Wolf (fox) head wall art: Default size is around 90cm x 65cm 96 pcs (all parts can be print at full size on a standard printer bed) All parts are numbered on the back and here you can find the numbers assignment :…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
This is a multipart model of Fred the Frog with a Lillypad that I remixed from two models on Thingiverse. The Frog has been split into parts for printing with either an MMU or as separate parts on a single filament printer. For the…
Mjölnir - Thor Hammer keychain
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Here it is! The remixed Teeth of Terra by Cornivius. I've done my best to make this into a multipart kit that's easy to print and assemble. Glue is optional for everything but the pipe, all other parts go together with Openlock clips -…
use brim on eye parts.
Remixed version of Mewtwo. I didn't have AMS, so I split the parts into 2 and printed them separately.
Bigger multi-part remix of Mitsu3Ds Halloween lettering. The parts are connected in puzzle jig style.
---------SMALLER VERSION FOR SMALLER HANDS--------- https://www.printables.com/model/737483-ergonomic-grip-for-miyoo-mini-plus-small-version-m ------------UPDATE TO v2!-------------- After some heavy usage I made improvements to the…
Remixed the "Rugged Multipart Pinecil/TS100/TS80 Case (V2)" to fit both of my Wowstick drill and screwdriver (1F), and all of the 52 bits, 4 long bits, and the 6 drill bits, as well as most of the accessories the accessories except for…
Eine schöne Weihnachtsbeleuchtung für mein Haus! A beautiful Christmas lights for my house! I printed with 353% for maximum Anycubic Chiron size! 😁 Filament amount for 353%: ~ 2.5 - 3kg Height at 353%: 721mm Lighting with 5m WS2812B led…
- AVENGERS.... ASSEMBLE! - According to the lore, this legendary item of Steve Rogers, aka Captain America was designed by Howard Stark, father of Tony Stark, to aid Rogers in his missions during World War II and beyond! This shield model…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
=============PLEASE LIKE AND SHARE============= Another character designed entirely in Fusion. Printed in parts and assembled (no glue required unless you scale). WARNING: All tolerances are very precise so well tuned printer required !!!
Train your mind, body and spirit 🐉 Dragon Ball Z fans, here's an awesome diorama for you! ⌛ This multi-part model was created by MiniWorld3D member Kuma , allowing you to print in full color with a regular setup and assemble later. The…
Remixable multipart stand that fits all of my models, both .step and .stl files are included. Built-in supports are included for the arm of the stand. Use at least 20% infill for the base.
Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo is a 3D printable model that lets you create your own tool box inspired by the Resident Evil franchise. It is a remix of the Tool box parametric model by Yanev ,…
A quick, simple model based on the Pokémon Gastly, made from scratch in Fusion. It's very easy to print, and comes with some alternative versions: Eyes Blank (draw your own with marker). Ideal if your printer can't do the small pupils, or…
A practical and durable redesign of the large Rugged Multipart Pinecil case , now featuring a completely screw-free assembly. This remix eliminates the need for additional hardware while maintaining the robust protection for your tools.…
This is a multipart version can can be printed more easily but also bigger. You print the Base, Statue, Flames and the Crown separately and glue them together afterwards. The crown can also be easily be repaired with the separate file.…
Bring a bit of nostalgia with you wherever you go with this fun Mario Mushroom Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
https://www.thingiverse.com/thing:3830316 presented a project to adjust Purging Volumes and provide smaller wipe towers with less waste. jltx did a great job on explaining how to use the tool. I also wanted a tool to test my bridging…
Updates 11/2025: Added a version for third party tips with 4.0 mm shank size (thin section directly behind the heating element at the front). The original Pine64 short tips come in 3.65 mm shank size, as do many third party options. But…
A simple model based on the Pokémon Clamperl , sculpted by me from scratch in Autodesk Fusion 360. Only the shells need supports. The files can be printed separately in different colors and assembled. Assembly is straight-forward, with…
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
The files available online from Stud.io parts packs were too low poly for my liking when increased to 300% scale, so I modeled my own version and split it into 2 parts for multicolor printing. To print both sections individually and glue…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 I designed this parts to create different costumes for DUMMY 13. The parts can…
I bring you this amazing Planter from Nintendo World in 2 colors for single extruder printers! Super easy! Great size at 100%, 10.7 cm tall, but can be scaled up with no problem. It has 3 sides with the Question Block. Includes draining…
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Have created a multipart version of "Corvega V8 USB-Holder" by demolition88. https://www.thingiverse.com/thing:3060893 Since I found the model good but somewhat boring in one color. I worked on the block a little more and made more space…
I liked the Hulk Multipart but don't have a dual extruder. So I modified the parts to be printed separately and then assembled. Printed at 100% and fully assembled, Hulk is 8.777" tall. I have included 2 versions of the pants; the…
For all the cheapos like me who can't afford a printer with an MMU, I've recreated the Tux penguin in multiple parts. All pieces should snap together, glue is only needed for the feet. When assembling, insert the tummy parts first.
The Octane from Rocet League is one of the most iconic cars from the game. I wanted to print a large version of the car for an rc car project so I split the car into seperate parts. This makes it easier to print, using less support for…
With the 3D Printable Elegoo Box Multipart you can create your own custom box with the Elegoo logo on the top. It has a base and is compatible with all bases I designed, able to customize to hold your Elegoo items, such as resin bottles,…
I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…
- MYSTERIOUS LIFE FORM FOUND ON PLANET SR388 - A fearsome alien parasite has arrived! This Metroid figurine is a companion to our fully articulated Samus ! These creatures give the name to the Nintendo franchise of videogames set in…
As it seems that everyone is hyped, I wanted to make a logo plate from the logo. The logo is splited in multiple parts so you can print it without any multimaterial device or tool changer For the fridge magnet i use 20 x 10 x 2 mm magnets…
I made this for last years halloween: eyeball with glow in the dark iris. Category: Other
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
https://www.printables.com/model/234512-octane-rocket-league-multipart Downloaded this model, some of the geometry was pretty bad so I had to do alot of cleaning. Here's the cleaned version. The trick I used to clean was to just use the…
Elite Space Commander – Heavy Terminator Armor STL Miniature Kit is a high-detail multipart model designed for collectors, painters, and tabletop enthusiasts who crave grimdark power and futuristic design . ⚙ Model Features 🛠 Multipart…
Changed the parts around latches to make them easier to reach
Choose a style to your liking. You can double print and glue the same parts to have two sided level effect.
I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…
🏥 Call Nurse Joy, we have a Poké-medical emergency! This multi-part model was created by MiniWorld3D member ChipsandRamen , allowing you to print parts in full color with a regular setup and assemble later. Pokémon Centers (or PokeCenters…
Summary: These are custom inserts for the Pinecil rugged case. I remixed some models from other users to better fit my needs. Hardware Notes: The brass and wet sponge cover will require M2 screws and the respective heat set inserts to…
Bring a touch of holiday mischief to your space with this fun Grinch 2D hangable model! Designed for easy printing and effortless assembly, this multipart design snaps together securely—no multi-color or multi-material printer required.…
WF3D's Cutefroggo sculpture is really nice, but the mesh is a single part and painting it in PrusaSlicer is a little tricky. This is a multipart model that's easier to print in multiple colours. I used Meshmixer to identify and split the…
This insert takes the original “TS100/Pinecil Top Large” insert and adds storage for all 7 heatset insert bits that come with the AliExpress tip. Also has a bit larger tolerances, which makes it easier to remove the small bits.…
My recreation of a Moroccan craft featuring hand-cut ceramic tiles glazed in different colors that interlock to create typical Arabesque & Islamic art geometrical patterns. This form of traditional art is seen in centuries-old palaces and…
Funko pop style batman figure. Print in parts then glue together.
Prints flat with no supports needed. Pairs nicely with the trees and lights linked below. https://a.co/d/8NqgDPH https://makerworld.com/en/models/799707-v4-christmas-tree-now-with-base#profileId-739567 Glued together with hot glue and a…
Choose a style to your liking. You can double print and glue the same parts to have two sided level effect.
This is a dollhouse lamp that you can fully adjust to your needs! The lamp is comprised of multiple parts that can be separately printed. The lamp post is hollow and the base has a conduit to run a wire through, so you can add a LED to…
I designed a new insert for the Ruggest Multipart Case (V2) to hold an ENGINEER SS-02 Solder Sucker and a 5ml Syringe to hold Flux. The SS-02 will need clearance of ~5mm above it. Either ensure an insert is facing it with clearance or use…
Imported the original STL into Fusion 360 and created a new design in multiple parts so I could print each color is a separate piece and then assemble rather than having to do filament changes during the print. May need to add dab of glue…
Are you a fan of Prusa Research, the company that produces high-quality 3D printers and accessories? Do you want to store and organize your tools and gadgets in a stylish and convenient way? Then you need the Prusa Box Multipart, a 3D…
This model is entirely made in OpenSCAD so you can customize it your way. I've printed everything on my Creality K1 (monochrome printer) using one mid-print filament swap for the banners. If you're not comfortable with swapping filament…
Logo de LEGO creado con diferentes piezas para poder imprimirlas en colores y que encajen.
Bring a bit of nostalgia with you wherever you go with this fun Hello Kitty Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans and makers alike. Features 🎒 Back-to-School Ready – Add a touch of…
Hello everyone! This is a model of a Jaguar E Type, lightweight version with some "artistic freedom". I optimized it for simple and fast printing by seperating to multiple plates. It is printed in 0.16 layer. It is simple to glue parts…
Remixed version of Suicune. I didn't have AMS, so I split the parts into 3 and printed them separately.
🍎 🐛 A quick, simple model based on the Pokémon Applin , made from scratch in Fusion. It's very easy to print. Comes split in parts for printing separately by color and assembling later with glue, which is necessary for a permanent fix.…
Bring a bit of nostalgia with you wherever you go with this fun Spider-Man Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans and makers alike. Features 🎒 Back-to-School Ready – Add a touch of…
Bring a bit of nostalgia with you wherever you go with this fun Minecraft Creeper Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans and makers alike. Features 🎒 Back-to-School Ready – Add a touch…
Bring a bit of nostalgia with you wherever you go with this fun Mario Star Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
This is a slice of cake. It has 3 layers of cake, two swirls of frosting, and a candle on it. Print instructions Most files will only need to be printed once. Files with the suffix "_2x will need to be printed twice. The candle will most…
Tolerances of your printer will play big role. In worst case remake the inside part of the model with bracket mounts for the pinecil, make it little bit tighter. Spare height for the solder roll is 2cm. Mine is only 16mm high so I have a…
To make it easier to insert and take out the tips for heat set inserts, I increased the clearance and width of the slot openings. I also modified the two soldering iron tip slots, making the sides thinner and more flexible. I don't want…
I needed a new badge holder for work, so why not make it fancy? I found the model by josedpedroso that was the correct size for what I needed, but I don't have the ability to do multiple colors. So I fired up Tinkercad, separated the…
Holds a .625" diameter x 5.2" long flux pen and a 1.8" diameter solder wick, both easy to get on Amazon.
----------------------------------------------------------- 🛠 PRINTING HELP & TROUBLESHOOTING ----------------------------------------------------------- ⚠ NOTES ⚠ • If Slicer errors and warnings appear, they should be ignored as they are…
I wasn't happy with any of the available key rings for the great Half Life 2 logo so I remodelled it to allow a see through appearance. This key ring is designed in 3 parts so as to allow printing with a hexagon mesh and it is split into…
Remix of the CNC Kitchen Heatset insert by Char to hold tips from the Aliexpress version of the tool, such as in the listing linked below. Includes space for Heat-set adapter and M2, M2.5, M3, M4, M5, M6, and M7 (Slightly larger) tips,…
A modified insert for the " Rugged Multipart Pinecil Case V2 " (large version) to store only the Pinecil and its USB cable. Since I don't have space for the optional soldering iron holder in my printed case, I removed the clamps for that…
These inserts allow use of the TS80 soldering iron and tips in the Rugged Multipart Pinecil/TS100 Case by PjotrStrog . These inserts are made from components in that design and TS100, Pinecil, TS80 & TS80p Case with options, Stand, Solder…
Bring a bit of nostalgia with you wherever you go with this fun Pikachu Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
As it seems that everyone is hyped, I wanted to make a logo plate from the logo. The logo is splited in multiple parts so you can print it without any multimaterial device or tool changer For the fridge magnet i use 20 x 10 x 2 mm magnets…
This is an insert for the Rugged Multipart Pinecil/TS100/TS80 Case (V2) by PjotrStrog. I modified the original TS100_Pinecil Top Large A insert to fit 4 tips instead of 2. For this I needed to make the cleaning wool compartment smaller,…
I adapted an insert for the FMchip FM03 soldering iron, remix a second insert for a helping hand, and also made a flux container. Parts from the other designs: Outer case from here Solder reel from here Improved Iron stand Helping hand…
I wanted to equip my TS100 Case with the inserts from jamie xu and Char to accommodate both my desoldering pump and my CNC Kitchen Heatset. Unfortunately, the TS100 collides with the stand holder due to the customisation of Char , so that…
Design is to be printed out in separate parts in the corresponding colors to eliminate the need to paint. This also allows everyone to be able to print this design regardless of what printer you are using. Combining a Jawa and Shy Guy…
Outtatime license palte no ams !!! Multipart !!!
Two friends have been searching many years for this treasure and lo and behold, there it was... Turntable video: ========================== Most parts will need at least some support, but splits were made with minimal support in mind.…
Hello makers! This is a special project I designed: a fun, multi-color piggy bank inspired by the beloved character Bluey . I originally created this for my niece, and now I’m making it available for the whole community to print. This…
This is a remix of Multipart Pinecil/TS100 Case by PjotrStrog to fit everything I need. I added a holder for TS100 M-Stand, soldering tip cleaner box (because I like it to be sealed in the box) and two kinds of solder that I use. I also…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the body to its parts (not into objects) and apply the fuzzy skin only on the biggest part…
An insert to store 1 SP10/SQ10 PCBite probe and (optionally) 2 PCBite holders in the awesome Rugged Multipart case V2. Two inserts can be printed to store 2 SP10/SQ10 PCBite probes together with 2 PCBite holders in one of the inserts (the…
The photos of the finalized print were taken prior to adjusting the tolerances, so quality and fit may vary. I will include the original STLs from the model I remixed; however, I caution against using them as-is since their orientation…
Wanted to squeeze in syringe with flux, spare tip and power cable, but there was no such option, so I made a remix of inserts. It' compatible with PjotrStrog's rugged case and it's only for TS100.
For more 3D models, visit http://www.Stltype.com Bring the iconic mad scientist from Rick and Morty to life with this detailed Rick Sanchez Fan Art model. Designed as a multipart model with no AMS required , making it suitable for easy…
Bring a bit of nostalgia with you wherever you go with this fun Mario Bomb Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
Meet Dropy, the cute and multicolored 3D printable figure inspired by Kirby. With its multipart design, this character can represent any type of liquid - from water to blood to gasoline. Perfect for your blood donation campaign, the…
Added the logos boarders as a 0.01mm wide extrusion into the lid. This allows you to select the parts of the logo in Bambu Studio as separate surfaces for easy multi color printing. The extrusion only has a width as 0.01mm to make the…
![Minecraft Diamond Axe [Multicolor | Multipart | Singlepart]](https://media.printables.com/media/prints/773555/images/6014470_c825d8e1-4ad8-47cd-a441-acfd4f9eec9a_da03612d-41d5-444f-8998-c2fb91e56171/minecraft-diamond-axe-leveled-1.png)
![Minecraft Diamond Pickaxe [Multicolor | Multipart | Singlepart]](https://media.printables.com/media/prints/773568/images/6014488_e93f5287-6a85-4fdb-9a65-dcc83047f27e_77d88cb7-751b-4184-aa7b-485ad2565436/minecraft-pickaxe-leveled-1.png)
