511 modeli
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I love this test for calibrating new printers and couldn't find it on prusaprinters.org, I uploaded it here. Please note, this is not my work! Autodesk and Kickstarter have developed a common standard that enables people to assess…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
0.2mm layers 10% infill Only the bottom part near the bed surface needs some support.
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
These tags are made for the dog tag contest. One is for boys and the other for girls. This is my first ever contest entry, so I am aware that it is not the highest quality product. I made this model in FreeCad.20. I would really…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Social Media: https://linktr.ee/storknestprojects Components: about 100 threaded rods - M10 about 300 nuts - M10 about 10 wooden panel boards a roll of 30m x 1,5m greenhouse foil 7 rolls of greenhouse tape (8cm x 15m) Updates: 06.04.2023…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Stand for HP ProDesk mini PCs. Works with HP ProDesk 400 G6/G7 mini and HP Pro Mini 400 G9 and probably also for a lot of similar models. Printed in PLA with 0.30mm layer height, no supports needed.
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
I designed the IKEA KALAX drawer to be able to use the full depth of the KALAX shelf with DVDs or video games to save filament. To make the model fit on an MK3s or MK4, I subdivided it accordingly. The wreaths on the supports serve to…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
Wydruk około 7,96 €–9,73 € nettoWstępna wycena jednego wariantu
If you want to remix it, please take the original Model from Magig_I3Prusa.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
Wydruk około 9,30 €–11,37 € nettoWstępna wycena jednego wariantu
This is a remix of CNC Kitchen's “Hotend Benchmark Test G-Codes”, made with the Excel sheet he published on GitHub. Works with printers with a build plate 25x25cm, like the Anycubic Vyper. The calibration will fill the bed from the front…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Read carefully before downloading the model!!! Very simple clock faces (clock dials), set of eight, two colours Model 67 has got three colours. I prepared four variants of the dial: A is round, measuring 20 cm, B is a wide oval 24x20 cm,…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Hello,,, Here we have more versions of our Festive reusable Christmas Cracker
Wydruk około 19,27 €–23,55 € nettoWstępna wycena jednego wariantu
Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern und Sternenzerstörer habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Geodesky slouží jako pomocný nástroj žákům 1. a 2. třídy ZŠ. Učitel zadá geometrický tvar a děti s pomocí gumiček jej vytvarují v geodesce.
Wydruk około 5,34 €–6,53 € nettoWstępna wycena jednego wariantu
Star Wars Achsrotation MK4 / MK4S X-Wing Todesstern habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Ein Podest damit man in einen Elektrokasten einen PI Zero 2W über das Netzteil stabil einbauen kann. Rastet in die vorgegebenen Löcher in der Box ein. A mounting platform that allows a Pi Zero 2W to be securely installed inside an…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
The Ultimate Backscratcher Let's face it, you're itchy! You're skin is crawlin! Help has arrived. Features FOUR MODES: Normal - A good ol' scratch Aggressive - For when you just got done rolling around in fiberglass insulation Pinpoint -…
2D printable QR codes to stick on third-party or worn build plates to make Bambu Lab printers recognise them. The size of the code block itself should be 5×5 mm (not including the border and dotted line). I just printed these on plain…
This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…
Chinesischer Drache auf 2 teiligen Podest, habe die STL zufällig gefunden und auf 200% skaliert gedruckt. Man kann das Ganze 3 teilig drucken was den Vorteil vom normalen Filamentwechsel hat aber auch als Einzelteil. Gedruckt wird mit…
Update, 2024-8-22: Here comes a big one… would call this a major update: 1) Added Newport/Thorlabs SM05, SM1, and SM2 threads (with friendly support by user @FWest_1838166). 2) Added 0.75 mm pitch filter threads ø 35 mm, 46 mm, and 82 mm,…
Ich habe nur das Podest entfernt. ------ ENGLISH ------ I have only removed the pedestal. Print Settings: Printer : Bambu Lab X1C Print time : 0 h 59 min. Filament : PLA Filament Brend : Geeetech White Resolution: 0.16 mm Infill: 10% Brim…
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
Base is extended out a little more than the original, and removed most of the top cover to allow for some clearance for screw heads if using the VESA mount holes, and to allow for some airflow in through the top vents. Prints without…
VERY IMPORTANT NOTE This is not a simple print, assemble and enjoy project. It requires quite some experience, basic knowledge in electronics, a good amount of patience and probably some nerves (it's worth it!). I'll try to give you as…
This is to be applied to a 3rd party sheets. The printer will scan this code just like it does on the official sheets. I could not find anything that worked for me. So I designed my own from scratch. - Download and print the pdf file to…
These customizable mesh inserts do great job of hiding that rat's nest of wires in the back of your Voron V0. The multi-part STL can be split in the slicer, and custom infill settings applied to the inner body to create a mesh of your…
In April of 2022, Zach Freedman of Voidstar Lab unleashed Gridfinity unto the world, endless possibilities for modular storage and organization and display and limitless other possibilities were limitless! Many STLs were available as well…
This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce Please read instructions before assembly. Instructions include a list of material and specs of the magnets used as well as ideal part orientation for printing and…
The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
https://youtu.be/PR1VPX4kCZE Inspired by geodesic domes this lamp shade is dual extruded in translucent PLA and dark colored PLA. The wireframe structure protects a thin shelled transparent core and fuses together at the top. Two…
I designed this stand for the awesome Moon Lamp from https://www.prusaprinters.org/de/social/17340-frank-deschner , because unfortunately I have not found a holder in this style. I have made the hole for the lamp exactly 26,70mm. I…
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…
At 100% resolution (Layer height 0.2) the color changes are: Layer 0: Blue Layer 5: White Layer 9: Red Layer 12:Black
10" rackmount for the HP ProDesk Mini G4. Prints without supports when placed front face down.
Light model to support a Prodesk or Elitedesk mini 800 G2 or equivalent.
Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…
Enemy status modes from Metal Gear Solid. Usually seen after hearing this: This colour print can be done without use of an MMU and can be done manually with a filament change at the appropriate layer when slicing in PrusaSlicer - for more…
Small pedestals for the Tonie figures. The Tonies hold on the pedestal thanks to the built-in magnet. Washers with a maximum diameter of 15mm are glued to the top of the pedestal. I glued the pedestals to the wall with tesa strips.…
This is for standard size popsicle sticks which I measured to be 113mm x 9.5mm x 2mm. Print a single hub to test the fit of your popsicle sticks and adjust the XY Size Compensation until the stick is snug, but not too difficult to fully…
I was really tired of printing off paper qr codes to glue on so I made some easily attachable/removable ones. I've only tested the textured plate one so far. I put a weak fridge magnet on the back and you just line up the slant with the…
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
Dear Friends, I just wanted to try 3th part heat bed plate from the Aliexpress. Of course i have identification problem. I tried 3d printed QR or barcodes but it didn't solve the identification problems. Then I bought UV resisted plastic…
Das “mini Geodesic Dome Gewächshaus” wurde während eines Twitch Streams entworfen, modelliert und aufgebaut. Die Segmente werden mit Hilfe von Rahmen mit PE-Folie bespannt. Danach werden die einzelnen Segmente zusammengesetzt und mit…
PLA is the best filament for this model
The Part is as a Base for your Sculptures Feel Free to scale it your way in all Axis XYZ the STL is clear so easy rto fit to a CAD or Blender sculp like Programm Please give me a like and a download
HP ProDesk 600 G3 mini mount compatible for mount into an IKEA pax cabinet hardware needed: 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (for example from IKEA)
Prints without support. Scale to the desired size in slicer Category: Outdoor & Garden
mount to place under a desk
A fully printed 3V Geodesic Dome approximately 40cm diameter. Colour coded for ease of assembly. Please note the orientation of Joiner B (Colour: Blue) which has an arrow geometry designed in the joiner/connector. The installation of the…
Set of fixations to build a geodesic dome (aka 2V Icosahedron Dome) human sized. BOM : 5-way fixation x16 6-way fixation x10 fixation x120 Wood screw M5x100 x120 Wood laths or tubes (dimensions depend on your wish) Fixations are clipsable…
(Updated February 2022 with several improvements and simplifications thanks to .benjamin. ) While using Jamie_K's geodesic icosahedral sphere in OpenSCAD, I ran into some issues: A sphere based on an icosahedron doesn't have an equator,…
HP Mini/Prodesk/EliteDesk VESA Mount for IKEA Skadis pegboard Tested on HP mini G6 and G9 but will probably work with any HP Mini with VESA mounting holes. Printed in e-PLA and seems to be holding ok, might redo in PETG later on
This is a remix of Niklas macht Druck's design. Needed a base stand for the moon lamp, that allowed for E26/27 bulb and this fixture: https://www.amazon.com/gp/product/B07BQRFHNK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed in…
Very simple design: this jig allows to bend quickly and repeatedly diodes for the Redox keyboard PCB. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 150µm…
Nodes is a construction toy that lets you build large wireframes with minimal material. Use those filament scraps for something big! https://youtu.be/Wj0XRU5XRyo Printing No supports needed Requires some precision for a nice part fit Use…
This is a parametric jar model. Download the Fusion file and you can change the height, diameter, and wall thickness of the jar. Print at 0.16 layer height for better thread action, however 0.2 layer height works perfectly fine. It has a…
printed in a prusament vanilla white drybrush water coloring many layers Artschool student work The mesh is from Blender optimized for NOSUPPORT use the cura magig 75deg max settings HAVE Fun PLEASE LIKE this creation as you Download to…
Simplified yet dimensionally accurate 3D models for 5-way and 6-way geodesic dome hubs and ball connectors designed and supplied by hubsTM. These models are also downloadable through their website;…
Shorter Mounting Design This custom mount allows you to securely install an HP EliteDesk 800 G Mini PC within your 10-inch server rack. The remixed design provides additional support by assisting the PC from the back of the rack, reducing…
This is an adapter to mount an HP SFF Power supply in an ATX Computer case for easy case swap. Fits most HP SFF power supplies, I believe. Main dimensions of the Power supply this bracket is designed for are 95x73mm (length doesn't…
This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…
Additional triangles used to change the door shape so that there is no bottom lip. Instead, replacing some of the bottom panels will make a more door shaped entry. After taking out one of the hexagons for the door, you can also replace…
Assemble hexagons and pentagons from a flexible structure to form a three-dimensional geodesic ball. I arranged the hexagons and pentagons so that the entire structure fits on your print bed in one go . The additional 15 clips you’ll need…
Whether you're a dog lover or just looking for a cool desk companion, this good boy is ready to print. As you can see in the photos, this model features clean, geometric lines that look fantastic in any filament color, though a…
Simple bracket to attach HP ProDesk 600 G2 Mini to the underside of my desk. Attached with 4 wood screws, uses machine screws in factory mounting holes to hit against rear support to keep from sliding out the back. Additional Hardware: 4x…
This is a combination of a few existing models. The original design from Abby575 was remixed by Chris_m48 and DeanR96 . I liked the shape and fit of the panels that DeanR96 remixed but wanted to use the ‘window’ design by Chris_m48 so I…
Well its a config bundle and so you have to import it first. If you slice benchy with this profile you will get a benchy in 8 minutes. This is just an upload of the Prusa's profiles used for the example gcode that comes with the printer.…
Introducing the Juice Wrld Spotify Codes Keychain, a unique and stylish accessory for fans of the artist. This 3D printable keychain features a Spotify code that can be scanned using the Spotify app on your smartphone, taking you directly…
This is a bookmark I made of the Lodestar Initiative from the book series, Keeper of the Lost Cities. I've made two variants, one without the backplate. This one while looking batter, is harder to clean up. and one with the backplate.…
This is a simple tree generator I made in blender 4.5 for a project. They should print without support, depending on the tree settings you use. You can customize the trunk spline, the number of leaves, the trunk height, and the seed. I…
This model is featured in figure 4.5 of Visualizing Mathematics with 3D Printing . Category: Math
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
infill 90% 4 x 4m16 vesa 2 x tiny flathead screws
This is just so you can print a podest to glue or model something on top of it to have a trophy for your kids birthday or so. Category: Art
Modeled after a 1977 Rhodes Mark 1 Stage 73 Piano hammer. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Infill: 100 Category: Music
A tutorial model demonstrating how to model snap-tabs in Autodesk Fusion for glue-free and zero hardware assembly. Once closed, this box will not open again without extreme measures. https://youtu.be/Wh6lxgLE92o Printing Print two copies…
When additional strength is required; for example, locations with high winds, or covered domes that could experience more than 20cm of snow, these new hub designs will help along with the installation of additional secure caps and ridged…
Remixed from: https://www.thingiverse.com/thing:4978318 Original description from Thingiverse: Wellll... I tried about 10 times across 2 different printers and 3 different types of bed to get this thing to work, but the small little…
Planter based on a small hexagonal hexecontahedron. Prints without support, just scale to the desired size in slicer. There's a hanging version too: https://www.thingiverse.com/thing:4776337 This came up as a little side project while…
I created this frame to hold an 2.5 Inch SSD. The frame simply holds on to the existing screws. I can recommend this cable: https://de.aliexpress.com/item/1005006379328635.html Feel free to create a custom copy for yourself:…
prints supportfree Please like it as you download to support the Artschool students that revive the filament. see the other diorama statue in my account
Here's Obi-Wan Kenobi's Lightsaber from Episodes I & II. I tried to tighten up my tolerances a little with this one so let me know if you have any issues with fit. Be sure to print six of the Pommel Blocks for the bottom! View some…
a clean sockel for your creatures
About the Design I wanted a large pot that I could print on my Prusa Mini+ and worked with my self-watering insert that this is remixed from. I love printing 2 tone planters as it makes it easy to create many unique variations and is very…
Das "Einfache Geodesic Dome Modell" wurde während eines Twitch Streams für den Einsatz als Projekt für Messebesucher entworfen. Es werden zwei Arten von Steckverbindern 3D-gedruckt, die mit Hilfe von unterschiedlich langen Holzspießen…
There was 7 wonder in the ancient world. One of them is the Colossus of Rhodes. It stood in the city, and build for the sungood, Apollo, after the failed siege of Demetrios Poliekretes. This is a modern reproduction of it, made for…
I designed these Cauls in Fusion 360 when restoring my Rhodes MK1 Piano earlier this year. I took inspiration from here and several other forums & YT-Videos. See the plugs in action on Youtube in this playlist, where i collected some…
Inspired by Bogdan Isopescu's clever solution https://www.kickstarter.com/projects/25645348/geo-the-geodesic-dome-connector I'm experimenting with printing the bottom part of the piece with flexible filament (TPU) and then print the upper…
