128 modeli
Saint Scholastica : Bas-Relief : two versions. The version on the left seems to need some widening while the version on the right could use some tightening up. I was experimenting with some detail manipulation and noticed the distortion…
Wydruk około 10,77 €–13,16 € nettoWstępna wycena jednego wariantu
This mount allows the camera to be installed directly onto the laser frame.
Wydruk około 5,95 €–7,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Same picks as Mikolas' but with a slight bevel or fillet all around the pick. This gives a more “on point” and deep sound and is more comfortable in my opinion. There's also a travel pick card for these picks here:…
I didn't want to pay for a stupid model so I made my mashed together my own.
Reloj de arena en espiral con bolas de accesorios para jugar
necesitas hacer un aro por cada relleno que imprimas new english version u need make one aro for else relleno that u print
La configuración depende de capa impresora, pero funcionan muy bien con altura 0.2 y velocidades entre 40/60. También aconsejo poner el modelo boca abajo en el laminador para que le dé un mejor acabado en la parte frontal.
♫ But you've got to Make your own kind of music Sing your own special song ♫ From talented 3D artist Luana Ferreira, aka @3dmvl , OpenFigure3D brings you these exclusive bust statues of the popular Nicholas Cage & Pedro Pascal meme !…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I do comprehensive 3D scanning and you can see some of my results here. If you are interested in my work and have a specific interest, you can write to me and it may appear here.
This is a highly detailed satirical representation of the "arrest" moment, featuring the iconic grey tracksuit, tactical headset, and water bottle. The model was sculpted with a focus on realistic fabric textures, clothing folds, and…
Es un Reloj que marca el tiempo a traves de un sistema mecanico basado en bolas de 8mm que se desplazan sobre rieles y caen en sus respectivos lugares de acuerdo a un balanceo de peso .Estas bolas caen a un contenedor para luego ser…
A design I made for a friend. Prints great upside down at a slight angle. Enjoy!
Legolas – Buste Porte-Stylos License This file does not include a commercial license . If you wish to sell physical prints of this model , you can obtain a commercial license by joining my Patreon: 👉 https://www.patreon.com/c/JulienMairy…
🎄 Saint Nicolas Figure – Christmas Spirit 🦉🦌🕯 Bring timeless holiday charm to your printer with this beautifully detailed Saint Nicolas figure , perfect for mantel displays, festive centerpieces, or cozy winter scenes. Few supports are…
Original model: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/nikolasbabetas/Neopixel_Holder by nikolasbabetas You need to print 4 of the holders, and they fit in the upper extrusion. For full instructions, see the…
Saint Nicholas Mitre / Sinterklaas mijter 3D model voor sinterklaasfeest. The Saint Nicholas Mitre (mijter van Sinterklaas, Mitre de Saint-Nicolas, Mitra Świętego Mikołaja, Mitra Svatého Mikuláše, Szent Miklós püspöksüveg, Mitra di San…
Unfortunately my camera doesn't capture the perspective well and that's why the face is distorted
Rodamiento de bolas desmontable. Se compone de un Aro exterior, y una jaula interior, que separa las bolas., el buje o anillo interior, que está montado en dos partes. y luego se fija con el cierre, que lleva 4 estañas. Orden de montaje:…
Upgrade your workspace with these pen/pencil holders featuring a barrel basket style shape. Choose between two lattice grid designs. The stylish organizers are optimized for 3D printing and ideal for storing pens, markers, brushes,…
Nicolas Maduro arrested Funko Pop. Feel free to scale it to your liking or to fit your printer. Let me know if you'd like another model, and I'd be happy to design it. More models on my profile. If you like any of them and want to leave a…
Saint Nicholas Staff / Staf van Sinterklaas voor sinterklaasfeest. Has a flattened side for easier printing. The Saint Nicholas Staff (staf van Sinterklaas, Crosse de Saint-Nicolas, Pastorał Świętego Mikołaja, Berla Svatého Mikuláše,…
🔹 Casual & human 🔹 Enjoyed this model? This model was generated using AI. The model may not be technically correct and may require further modifications before printing. Printing and use are entirely at your own risk. Coffee = motivation ☕😄
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
Son los dos extremos de un recoge bolas para los entrenamiento de padel o de tenis. se imprimen y se insertan a presión en un tubo de PVC de 80mm de diámetro que se compra en cualquier ferretería. Está impreso en PLA y con -0.03 de…
Sculpture of Nicolas Maduro being transported to NYC, comes in two versions: split and full body. Split is better quality, but leaves a line that would need to be filled and sanded prior to painting.
Este é um gancho compacto e resistente, ideal para pendurar bolas de Natal ou outros enfeites de forma prática e segura. Com um design eficiente e fácil de imprimir, ele é perfeito para quem deseja decorar sua árvore de Natal com rapidez…
Nicolas Copernic – Buste 🇫🇷 Description (Français) Ce buste représente Nicolas Copernic (1473–1543), astronome et savant de la Renaissance, dont les travaux ont profondément bouleversé la compréhension de l’univers. La sculpture est…
This benchy from Star Trek has warp gondols that allow it to reach warp.
LEGO & DUPLO Compatible Saint Nicholas Staff / Sinterklaas staf. Can be used with Lego or Duplo. The Saint Nicholas Staff (staf van Sinterklaas, Crosse de Saint-Nicolas, Pastorał Świętego Mikołaja, Berla Svatého Mikuláše, Szent Miklós…
This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims. Hardware…
Nicol Bolas's modern design I textured it and animated it into a basic idle animation https://youtu.be/LngooN684aQ If you want to help me keep making free models or want to tell me what I should make next please check out my Patreon
You will need to print the .stl files and then glue them together. Then simply add a pin. Program used: OnShape Tested in CraftWare
This is my printable and parted version of Nicol Bolas by mrhers2 Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 20 Filament: Any PLA Back Post-Printing…
Print 4 of these feet to hold your Algolaser Alpha MK2 in place on your spoil board. Designed for use with a spoilboard or grid board for keeping your laser projects in place. You will need: -Board or surface to mount to -4 Printed…
this is a model designed and draw be me to hold the car mats for my audi a3 1998. i could not find where to buy the pieces so i make new ones. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%…
I printed it in white PLA from creality in vase mode, with a 0.4mm nozzle on my Artillery Genius Pro, built to be printed on a 20x20 bed in one piece. I aslo bought separately a “Ceiling Pendant Light E27 Lamp Holder”. Last picture has…
Soporte para Biobolas de acuarios, apilables
For those who need a little peace in their home office - Experience the bliss that Cameron Poe feels when he realises he's going to see his little girl for the first time, little does he know there's gonna be some turbulence. Included is…
Přívěšek Mikuláše například na pytlík s dobrotami pro hodné děti. Výška 65mm Zároveň i verze bez očka na hlavě Čert a anděl k dispozici v následující kolekci: “Mikuláš” https://www.printables.com/@anthancz_1533299/collections/1776399
3d printed Caps are connected with glue and small lengths of filament. The body is made from a standard size paper tube used to ship posters or long items. The paper tube is squished into the oval shape and covered in thin fabric. I used…
Upgrade your workspace with these pen/pencil holders featuring a barrel basket style shape. Choose between two wavy designs. The stylish organizers are optimized for 3D printing and ideal for storing pens, markers, brushes, highlighters,…
The holder lets you scan up to four Polaroids at once. Supported formats: SX-70, Polaroid 600, or I-Type. You’ll need 66 magnets sized 3 × 2 mm for assembly.
Make sure and share your makes and if you like it please give it a ❤ LIKE! UPDATE: Just added a Tip Holder! You will need 2 5mm x 8mm bolts and 2 5mm nuts. I noticed when using the device that the electrical cable would sometimes come…
A cookie dough cutter. 14 cm high, should print two “cutting” layers with a standard 0.4 mm nozzle. One layer however is fine for a dough cutter, too.
It's still a cookie cutter. Just be aware of the possible health risks that come with 3D printed items intended for contact with food. Something to read up on if you dont know what im talking about :…
Te gusta Magic The Gathering? Demuestralo decorando el arbol de Navidad con el Mana que mas juegas. Una forma diferente de decorar la Navidad Do you like Magic The Gathering? Show it by decorating the Christmas tree with the Mana you play…
Es un puzzle que consiste en usar 10 fichas para determinar el camino de las 8 bolas, hacia los depósitos inferiores según lo indique el reto. Cuenta con 64 retos con soluciones únicas, los retos están con los colores que yo lo imprimí,…
FR Vous trouverez ici 3 accessoires vous permettant de fixer votre laser sur une surface de travail de MDF de dimension 650 x 700 mm. Les cales permettent de centrer parfaitement votre Delta sur la profondeur de 70mm, positionnez-en 2 sur…
A wall art dedicated to “Le Petit Nicolas” ! I used a children's coloring to create that model.
Adapter Molassefänger M16x1.25 zu 3° Konus (Schliff 18,8) Adapter Mollasses catcher M16x1.25 to 3° taper (18.8 cut)
This is a card version of Nicol Bolas, God-Pharaoh from MTG Place a light on the base to illuminate the card Print in white filament for the best results 100% infill This is Black and White btw.
Hey everyone! 🎨✨ The model can be printed in up to 7 different colors! 🌈 This is a fantastic opportunity to let your creativity blossom and create something truly unique. Each color will add a personal touch to your creation and enhance…
Hello everyone, This is my design for a Koolasuchus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
It is a similar design to the original model but fits a 180-size GPS (18mm x 18mm)
Bolas de Natal com a tecnica do "M600" ideias para decorar a sua avore de natal. brevemente com nome. cada modelo foi efectuado teste de impresão. Christmas balls with the "M600" technique, ideas for decorating your Christmas tree.…
Jean Nicolas Arthur Rimbaud – Buste 🇫🇷 Description (Français) Ce buste représente Jean Nicolas Arthur Rimbaud , inspiré de la photographie la plus populaire du poète, celle prise par Étienne Carjat en 1871, où son regard clair et perçant…
SOLAS Lifebuoy 50mm diameter
a picture of orthodox version of saint nicholas
Product Compatibility Machine Model: Singer 717 School (Scholastic) Replaces Part Numbers: #163997 (Vertical) & #163329 (Horizontal) Specifications Type: Spiral Miter Gear (Bevel) Teeth: 18T Ratio: 1:1 OD: 24mm Vertical Gear ID: 15.5mm…
Link to video was shared by reddit user. Uploading to try to help slice for a better print
A high-performance molasses catcher designed to keep your hookah clean and your session smooth. It effectively traps excess molasses before it reaches the base, preserving flavor purity and reducing maintenance. Compatible with most…
Created from a free 2D picture and modified for 3D printing. See also Albert Einstein : https://www.printables.com/model/617716-albert-einstein-art-mural
Simple cut and splice to make it wide enough to fit the Algolaser 5w DIY laser head. Should fit others of the same thickness. Please excuse the dirty laser lens.. hence the need for it 🙃
This bracket enables you to mount a rear blinky on a Blackburn EX-1 or EX-2 bike cargo rack. Zip ties are sufficient but I recommend using glue (E6000) also. I have tested it on the NiteRider Solas and the CygoLite Hotshot
This detailed 3D printable figure captures a majestic, bearded Winter King, often reminiscent of Saint Nicholas or Father Frost. ❄ Clad in robes decorated with snowflakes, he holds a staff topped with a snowflake and a lantern. This model…
My toddler pulled the button out of my Niterider Solas and lost the part. I printed this in black Ninjaflex. It was a little tricky to print correctly- I had to play with the print settings to get the part to resolve properly and not turn…
For those in need.... Colorsound (solasound) Wah wha pot mount and actuator arm. Had to remake this from scratch, using broken pieces of the old Wahwah. I designed it with a 1 mm gap where you slide the pot mount over the metal, but not…
Model of the catalytic domain from the Trichoderma reesei cellulase highlighting the long groove that is form-fitted to bind to the cellulose chain. Protein was rendered as surface, then sliced in half to expose the binding groove.…
This page includes a single project file (.3MF) containing all of the printed parts needed to build SolarSim - an inexpensive, open-source, benchtop solar simulator for the study of phototaxis - the movement of plants and algae in…
👉 When the Fellowship needed an archer, they got something even better: an unbreakable brick! Lego-las is the squarest elf in Middle-earth, always ready to shoot an arrow… as long as he doesn’t step barefoot on one of his own pieces. With…
This is a replacement turbo laser for the Sega Star Wars Trilogy Special Edition pinball machine from 1997. It was made from a 3D scan of the original part. For best visual results, print the part in the orientation that it is in when…
Legolas Son of Thranduil — Bust Inspired by J.R.R. Tolkien's Writings This bust for 3D printing portrays Legolas, son of Thranduil, drawing inspiration from J. R. R. Tolkien’s writings for its interpretation of the character. This…
Holds two molasses funnels perfectly secured for storage
A simple design of Tower Hall of the St. Scholastica campus.
Tie down clip designed for the 35mm wide Ergolash Buddy, tie down strap. Included the .step file, so it can be modified. Print with 5 walls+ to ensure 100% infill to make a stronger clip. Works fine in PLA and printed in 0,2mm layer height.
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
i designed a simple holder for the HOTO Laser Pro. It fits a Ikea Skadis board. I had enough of this “where is that thing now?” so now have a place to store it where i can always find it. I made two versions. One with some holes for a…
Replacement bobbin winder tire for the Singer 717 School (Scholastic) sewing machine. Print Settings: Material: TPU or Flexible filament (Required) Infill: 100% Special: Enable Fuzzy Skin on outer walls for better traction. Supports: None…
I lost mine so I whipped up a new focal guide for my AlgoLaser engraver. I will make a more authentic one shortly that fits properly on the holder at the buck but its suitable for confirming the focus of the laser as it is 30mm. It can be…
Nickol Bolas from MTG, (the best card ever).
Saint Nicholas, Angel & Krampus – "Color Me!" Edition (11 cm) A beautiful holiday set of detailed figures featuring Saint Nicholas, an Angel, and Krampus, ready for you to creatively paint and bring to life! This set is part of the "Color…
nicholas pok'emonball
Replacement Cam Stack Gear for Singer Part Numbers: 172803 381575 381577
Legolas Lord of the Rings Figurine is a detailed character 3d printable model for fans of the Middle-earth elf archer, made for collecting and display. You can print it as a tabletop collectible, desk ornament, or centerpiece for a lotr…
Criado no PTC-Creo um simples organizador para agilizar suas partidas de Sinuca (snooker). Feito com base em bolas de Ø54mm.
A Deckbox for MTG commander, fits 100 double sleeved cards, with a slot in the front for the commander in a toploader.
Hello, I tried to print some pieces but the slicer was not having it so I tried to thicken the spots.
"St. Nicholas + Devil + Angel" Cookie Cutter + Stamp set Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: St. Nicholas Stamp - 43mm x 69mm x 4mm Cutter - 51mm x 78mm x 12mm Devil Stamp - 50mm x 61mm x 4mm Cutter -…
Elementos para la construcción de estructuras con palillos
The characters have been inspired by their paper-puzzle originals from ABC magazine that was issued in 1978 in former Czechoslovakia. These models were usually filled by sweets or nuts and placed in the corner of the windows. The magic of…
