164 modeli
Enjoliver un enjoliveur ;-) de roue tôle avec un logo blanc et noir collé au centre de celui-ci
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Version 2, fixed issues with the design and should be considerably more printer friendly. This is a highly detailed model, recommend the 1.0 or lower layer height and support blocks in the mast otherwise it is near impossible to clean out…
Ninomae Ina'nis' mascot from Hololive. The halo is excluded from the design for the purpose of 3D printing; also, the model is missing a leg when it should have eight, like an octopus. I plan to edit the model in the future to fix the leg…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Shishiro Botan's mascot as a model you can print. I suggest using a resin printer over a FFF printer due to the tail's thickness. Edit 4/6/22: Version 2.0 The tale is thicker thicker Adjusted the angle for the fuse to reduce the amount of…
Scale 45 x 50 x 80mm This is the Japanese version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for her native viewers. I decided to add a little more personality and modeled it balancing on a burger to fit with Fubuki's…
I made some modifications to SeafoamBoy's Ouro Kronii BEEGSmol model and converted it to STL to make it more 3D printer friendly. I uploaded 2 versions one is just a straight conversion of Kronii's head with a base and connecting support…
Solo es una simple aceituna / its only a simple olive
Olive oil spout for most glass bottles. It allows the run off to drip back into the bottle. Print the gasket in tpu, and everything else in whatever you want. no supports needed Print Settings Printer Brand: Creality Printer: Ender 3…
EDIT 5/17/2020: Edited title to include VLASIC brand of pickle jar. @Jspeed and @boundarycondition 's creations were just a perfect match made in heaven for a tiny version of the Modular Hydroponic Garden. This mouth is for the 80mm jar…
This is Oliver, a pig themed sequential discovery puzzle box I designed. There are 20 individual pieces, and five small compartments you'll discover along the way. I don't think this is an extremely difficult disassembly, maybe a 5/10,…
For a low loader-project, I’m working on, I was in search for some cargo. I found this fantastic chain tractor, that would just fit. Of course, the original design was made roughly 27-times as big as I would need it and for completely…
Scale 57 x 74 x 92mm Overseas version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for foreign viewers. The main difference between the two mascots is the cloth around the neck: Japan viewers have scarves while Overseas don…
Ancient greek style decoration texture roller "Olive" It is ~20mm height and easily scalable. Ready for clay ceramics pottery craft. It requires 1-1.5mm shaft (like copper wire) Printing with 0.12 layer height works nice. Ask me for…
A Wall Art dedicated to Olive & Tom. As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used a children's coloring to create that model.
Cuchara para aceitunas. Cuchara con agujeros para permitir la evacuación del liquido
Model of the figure of Oliver Atton (Tsubasa Ozora) main protagonist of the anime and manga series Captain Tsubasa(1983)
This vase-mode print features two compartments and is inspired by the style of Olivetti computers in Italy, late 80s. Print in vase mode, of course (and note how vase mode is abused in this model). Scale as you wish. Make sure, when you…
Oliver 77 Row Crop - 1:8th Scale Assembly instructions in the download section Uses M4 and M2 Screws
Ideally you'll need a 30x30x35cm bed or larger, it can only just fit on my CR-10 bed. There are files for 20cm beds like Enders, but you'll need to join more pieces together and will have more seams and misalignment, depending on how good…
This is more modular version based on Haggy_23 (created by) and Ettena (remixed by) Cletrac OC3 1:6 scale tractor. https://www.thingiverse.com/thing:4159135 https://www.thingiverse.com/thing:4875535 For visual modifications I used…
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
Olive Oyl from Popeye the Sailor Man To go with the Popeye design here: https://www.printables.com/model/409082-popeye-the-sailor-man Single extruder multi-color design First layer: White Second layer: Yellow Third layer: Tan Fourth…
I made this easy to print model of the Roboco glasses. I did it because in my third world country it is difficult to find official lenses. To attach the glasses I recommend using a needle and thread, and to make the legs of the glasses…
Szczypce do wyciągania oliwek ze słoika. Wydrukowany z HIPSX, może mieć kontakt z żywnością i być myty w zmywarce. Zamieniłem plik na poprawny. Poprzedni był omyłkowo z oliwką :-) Print instructions Unassociated tags: olive tongs,…
To transfer the oil from the 5 and 10 liter cans it is always a great effort, especially when the can is almost full. I therefore designed a pouring spout, suitably equipped with the necessary air intake, which is screwed onto standard…
A carved wood owl sculpture. Tree supports are EZ to remove, get the whole collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Harvest with Ease: The Ultimate Hand Rake for Precision and Comfort Engineered for performance and built for comfort, this sleek grey hand rake is the perfect tool for efficient, damage-free harvesting. Featuring lightweight construction…
Pen holder with face from Oliver Hardy
Material PLA (für die Feder könnte man natürlich auch flexibles Material verwenden) Teil Füllung Schichthöhe Stützen Rand EK-Buechse 25% 0.28mm ja nein EK-Kolben 25% 0.28mm nein nein EK-Feder 100% 0.28mm ja nein EK-Buechse 100% 0.28mm…
Pause to add nfc tag, support the loop.
Cat People - Oliver Yates (John Heard) & Alice Perrin (Annette O'Toole) - 2006 - 2006 3D printable model.
Nasal irrigation olive to use with standard syringe. Print in TPU with 2 (or 1) walls, 0.1 layer height and no infill. There is also a *_spiral version to print in vase mode. *** Read This *** Please do cold sterilize before use and…
stick holdable
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Esteban Ocon from Haas . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item to…
This is a simple cap for a stainless steel spout that is common on many olive oil dispensers. Printed in NinjaFlex TPU at .35mm layer height
Bring some Mediterranean vibes to your walls with this 3D-printed olive tree art. Like the real trees, no watering required! Perfect for adding a touch of nature without the risk of an olive oil spill.
FIRST PRINT EVER MADE, I COULD NOT FIND ONE OF HIM DONE.
A new 3D figurine generated by AI, a Chibi Olive & Tom. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Saw this puzzle in a youtube video. Decided to make it 3d printable. There are two ways to assemble this puzzle: without the string loop (easier), and with the string loop (harder). You can begin with version one and then dissemble and…
Oliver Hardy Buste 🇫🇷 Français Ce buste imprimé en 3D représente Oliver Hardy , inspiré de la photo la plus populaire du personnage dans son rôle emblématique du duo Laurel et Hardy . Son visage rond, son expression assurée et légèrement…
Green Acres - Oliver Wendell (Eddie Albert) & Lisa Douglas (Eva Gabor) - 1965 3D printable model.
coin/keychain made from scratch using images on google
Español = Práctico dispensador de aceite de oliva adaptado a todas las botellas de tapon tipo pet (tipo coca cola, fanta e muchas mas). Saliendo el aceite muy despacio y bien controlado. También te ofrecemos distintas adaptaciones para…
Simple Pizza w/ pepperoni, olives and onions Category: Decor
Features include movable arms, hands that can hold things such as the knoife accessory and multiple faces (happy, angry, upset and blank) that can be placed on the body. Variants of the arms and front body without these features are also…
Ich habe den landwirtschaftlichen Traktor im Maßstab 1:6 entworfen. Als Fahrer kann jede 1:6-Actionfigur verwendet werden, und ich habe den Oliver Cletrac HG 42 Traktor gewählt. Einige Teile sind zusammengeklebt, andere werden mit…
Remixed model from Zydnar to fit my smaller sink. 8x8 cm size, nozzle size 25 mm. Fits standard Palmolive soap dispenser. Printed in PETG no supports but PLA is probably a better choice. Original model by Zydnar…
One of the most time-intensive stages in preparing olives is the crushing. Properly crushed olives are ready within about a month, while uncrushed olives may require a year or more. To make this process faster and easier, I designed a…
Kids Art - Oliver Owl 3D printable model.
Nintendo 64 Controller picks, best printed with one wall for detail at 100 percent infill.
This is Olivette, the prize I put inside my SD puzzle box Oliver. I don't have an MMU, so my method for printing is to do single layer prints of the red pieces, followed up by the black pieces and then finishing up with pink, all without…
This whole project started when I wanted to create a small rake for this RC tractor. I've never come around to actually building a rake but now I have a 3 point hitch with various attachments. Additionally I've also included a blank mount…
Clip this part around the plunger of your Palmolive soap dispenser to limit the amount of soap dispensed with each stroke of the pump. Use the scaling function of your slicer to make it thicker or thinner to adjust the amount of soap…
Oliver Wendell Jones : Hacker : Bloom County
Hello! My family wanted some olive branch themed jewelry, so I created these models! The models with two loops were used to create necklaces and bracelets, and the models with one loop were used for earrings! In my picture, I printed out…
Minimise waste and allow more accurate dispensing of the (now quite expensive) precious green liquid. Or any other oil / liquid. Allows the lid to seal OK, on my bottles at least.
The symbol "ᚱ", the Norse rune equivalent to the modern English letter "R." The significance is unknown.
A pressure fit cover for a 24oz. Mt. Olive pickle jar lid. Also gives a better grip on the lid (though not the intended use)
Printing Tips: Print time: ~20-30 minutes per keychain Print flat on the bed - no supports needed Use contrasting filament colors for a two-color look (e.g. white backer + black text) Add a brim for thin script fonts to improve bed…
I couldn't find the year of production but I own it since the late 1990s, so it's 25+ years old already. I made this model only to practice in CAD modelling. I did not print it as I have the original mouse but I think this model may be…
towa pet bibi made in blender be extra careful when removing support for the tail
Adapter for 10l Palmolive canister to DIN 45 AH 23/45 tap with washer. May also work for other Canisters with runout inner diameter 36mm Adapter: PLA+ Washer: TPU Category: Kitchen & Dining
The Oliver Lamp is a captivating example of design merging with 3D printing technology, enabling enthusiasts to independently produce a piece of home décor. This lamp consists of three main parts, all printable in PLA: Base : The…
I took a photo of this olive tree in Greece. i took the leaves off because it made the file huge and would take ages to process. it would make a nice base for a bird or animal or just for hanging things on…
I wanted to make the eyes black but the model was not amenable to filament swap. So I “poked out” the eyeballs. Print the face and the eyes separately, and push the eyes into place. I forget if I scaled the eyes to be a little smaller to…
Some of these olive oil bottle tops are pretty loose and could potentially fall out during use. The bottle top restraints included here will prevent that from happening. There are 2 different designs as one bottle that I have has a little…
Say hello to Oliver – a modern, minimalist cat figurine with plenty of personality! Oliver’s clean low poly lines make him a striking addition to your workspace, shelf, or 3D printed animal collection. Whether you’re a cat enthusiast, a…
Tired of wasting that last little bit of soap in your soap bottle. No more! With this little thing you can drain your soap Bottle just set the Outputting soap on the top and the input on the bottom and then wait Print tips Printer:…
It happens, the original metal cap failed due to over-tightening. I like to have my olive oil tidy, so... 3D printing was the answer. This cap fits on 30mm wide glass bottle. I made it fit snugly to avoid drips. I kept the plastic seal…
"I'm not around, I havent been here for a while!" Bring the eccentric alt-pop icon to your display with this high-fidelity, static-pose tribute figurine. This model is a frame-accurate recreation of Oliver's unforgettable look from the…
Enjoliveur pour spot encastré. il vous permettra de pouvoir remplacer vos spot par des plus petits sans avoir besoin de reboucher le plafond et de repeindre. si vous modifiez l'échelle ne modifier que le diamètre, ne touchez pas au…
A simple case for Palmolive shaving soap sticks. Soap diameter of about 28mm and 82mm height. Palmolive inscription placed at the bottom. Two parts available, which are the top and bottom part. Does not require any supports. Both parts…
“a” Gawr Gura/Hololive-themed cookie cutters! I'm going to do a lot more of these with different fandoms, just you wait-- Check out my other cookie cutters here!: https://www.printables.com/@barbilou_1174680/collections/1039303 Enjoy it,…
This model replaces the feet for the Oliver 9 typewriter. Print in TPU No supports needed There is some variability in the manufacturing of the foot hole in the Oliver 9. This foot model fits snug in one machine, looser in another, but…
Personalized gift for the Olive family. Says "I Love Us" from one angle and "Olive Us" from another! The letter blocks are positioned to compensate for the kerning so that the typography looks natural from each of the two viewing angles,…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
front is logo back says council
The aim of the puzzle is to remove the ring from the rope as seen in the picture. You will need to put it together with string/rope. The beads should be able to slide around the string or at least be fixed in place and give it's connected…
Keep the magic alive while refilling your soap dispenser without disturbing the fish or turtle on the insert inside the bottle.
Keep your kitchen counters and dining tables clean with the Olive Oil Drip Tray This tray prevent oil rings on your desk and keeps it clean from oil mess, it's simple, effective solution designed to catch the "extra" oil that naturally…
A sieve - bowl for olives (or cherries or anything you want). You can use it with original 370ml jar. Printed in PET-G, no supports. Hand wash. Enjoy! Miska - cedník na olivy (nebo jiné pochutiny v nálevu). Šroubuje se na originální 370ml…
0.2mm layer height Use the 3mf file for colors
Parts needed are 5/16 Full Metal Rod "its a tight fit but i heated up the tip and pushed the sword together and glued it"
A cover for a Palmolive liquid soap dispenser. Printed in vase mode. I used a 0.4mm Nozzle. Print in vase mode. Set the layer height to 0.4. Set extrusion width for all types to 0.8 (yes that's fine with most printers). 4 bottom layers…
My wife needed something quick to hold Sam's club Olive Oil Bottle and avoid oil leaking over the counter top or using a paper towel under the bottle. ☕ Be my caffeine patron! A little coffee goes a long way in keeping my creative gears…
front is the logo back says advent
Replacement rubber damper (silentbloc) for the Olivetti Lettera 22 typewriter from the 1950s. These dampers connect the carriage to the chassis and absorb vibrations during typing. Over time, the original rubber hardens, cracks, or…
I printed it with clear TPU. it was maybe 2 mm too big so I put some foam tape inside and that worked great.
This is a parametric rotating knob for an ancient Olivetti DM 282 matrix printer. You can change some values such as walls thickness or pin diameter in the spreadsheet if you want it to be stronger or if my tolerances are not good for…
Replacement rubber foot (patin) for the Olivetti Lettera 22 typewriter. The original rubber feet often deteriorate over decades, causing the typewriter to slide during use and potentially scratch surfaces. This reproduction restores…
korone tree face
