70 modeli
Oogie Boogie Figure Introduction I created this figure mostly to practice sculpting in Blender. And since it turned out alright I thought I would share it on here. Since Oogie Boogie is basically a sack, the model can be printed easily…
7 autres Oogie Boogie Ici ! 7 others Here ! https://www.cgtrader.com/body3d Support me on Patreon Follow me on Category: Sculptures
Don't see one on printables, got from thingiverse. Excellent, clean print. https://www.thingiverse.com/thing:454603
Very nice Oogie Boogie model by ChelsCCT (ChelseyCreatesThings) The model is in high quality. I recommend printing at 0.15 layer or better. My print is 0.15 layer and 15% fill. Without supports. I used ABS material for better…
Oogie Boogie from Nightmare Before Christmas Key Chain/Earring Included STL so you can remove the key ring hole. I made a large Oogie for Halloween decorations. I used 15% infill for earrings. If printing for a keychain, increase the…
This is Oogie Boogie ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5…
I‘ve always loved Oogie, and I promised my gf to make one for her someday, so, here it is. I hope you like it.
Jack, Sally, Oogie Boogie are characters from the Nightmare Before Christmas movies & books, made into rubber duck style models, closely replicating the Tubbz brand toys. These are sized to match the other sets I've created, so that your…
Comfy stylus, made for boogie boards, but prolly useful for any tablet devices? Includes configurable freecad file. Print Settings Notes: Vase mode recommended (printed in one go with a spiral) Category: Tablet
Inspired by watching Rise of the Guardians with my kids, Here is my model for a Googie....Easter Egg with Legs as seen in the Easter Bunnies Warren. If you want a Nice Egg Size scale it down to 45%, though i have left the file bigger too…
I decided to combined a few of my published models. Now you can find all the same fun stencils and styluses in the same place! Our kids Boogie Boards came with some neat stencils (a lion and a butterfly). Unfortunately with them being…
Oogie Boogie Mask from Nightmare Before Christmas. Modeled by me in Blender
A 2D wallart of Oogie Boogie. I use it as a window decoration but feel free to explore your imagination. And remember to share! We will be happy to know where the Oogie will terror the kids! ****************************************** All…
Llavero del personaje Ogie Boogie,porfavor si te gusta mi diseño,no olvides darle un like y visitar mis otros diseños!;)
If you would like to download this awesome design, please do so on MakerWorld! https://makerworld.com/en/models/112498
I tried to print this: https://www.printables.com/model/135690-oogie-boogie-earring/files but it seemed to me it has some problems, so I made another set from some internet picture.. My daughter likes scary earrings..
A single color or there is a 2 color version of this print. I liked using glow in the dark and white.
A low-profile solution for affixing antifog to protective goggles. I really like the super-low profile airsoft eye protection options (such as the smith optic boogie ventilators), but they all suffer from the same severe fogging issue.…
My brother wanted a Mesa/Boogie logo instead of the Marshall logo
Redesigned the core from scratch to allow a usb power lead in. Visit our blog to see this and other projects we have completed https://realbaddad.com 3D Printed Fortnite Axes & Props -…
Oogie-Boogie keychain, character from Nightmare before Christmas. Made in tinkercad, multiple layers for color change. Negative part for the hole for keychain. Check back for more designs or request one from me personally. Thank you!
Oogies dice modeled up as a 1" (25mm) cube. Highly recommend printing in resin, though FDM works well too with the chamfered edges. Paint crimson red and use a black and brown wash to make them look nice and dirty!
In the film oogie boogie throw this dice so I came up with the idea of become this dice in the device that thorw dices. It shakes in the interior due to a stair. In order to not have supports there are only 2 pices that can be sticked…
se puede imprimir con cualquier tipo de filamento rígido, puede ser PLA, ABS, PETG, etc, utiliza soportes.
Lowered the camera mount to allow for the Logitech C615 camera to sit further down and have better visibility of the nozzle. Screw the whole camera mount in with the printed screw. Printed on its side with supports at .2 layer height in…
I have added a Santa hat to make it more Christmas themed.
This model took a good bit of modification to make it turn out the way it did. Ive uploaded it to cults because of that reason. Ive included the SVG here in raw format (and it needs to be modified etc before attempting to print…)…
Add some Halloween fun with this Oogie Boogie Lightbox. This does require a printer capable of multiple colors, like a Bambu with AMS. There are two pieces to this model. Face - this is the multi-color print, Back that press fits into the…
I had trouble printing the camera back without using a brim. Everything else prints fine as is. I recommend 55-100% infill for anything with threads.
Here's my proxy model for Pandakai from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
My wife and I are headed to Disneyland this weekend to celebrate the 70th Anniversary, along with my mom's birthday, and we're planning on checking out the Halloween decor that will be on display! In past visits, we've had some custom…
Easy ornament to print. No supports needed. Can be color changed by layer or painted with MMU.
Introducing…….AIRBOOGIE!!!! This is a remote control swamp boat/airboat, designed around a boogie board. After an initial test run I have made the following changes to the design : Additional clearance for the propeller on the cowl…
Update 15.02.2025 I still got problems while calibrating the sensor. Finally I guess the main problem is not the idler but the main plate. With MMU there is another type sensor to detect the filament. It triggers on the movement of the…
If you lose the original stylus and the backup just print yourself a new one. Small but comfortable. ℹ : fits model - WT16312B holder sleeve and stand hole (see images below). Still draws on other models. Tip: print vertically with…
An Oogie Boogie keychain/Ornament I designed for 2024. I printed it with a 0.4mm nozzle and used a stary PEY build plate to add the sparkle effect. I made an indented version which works with printers that can't swap filament mid print.…
I didn't want to re-print Boogie's Big Einsy Case to fit the cable bundle for my MMU2, so I remixed the cable-gland pieces to fit an extra ‘hump’ for them. Note: The zip-tie channels were difficult to fit and may interfere with the…
A THREE COLOR PLA printed earring set printed with a .6 nozzle. Entire earring from mount to bottom is approximately 50mm as printed. Get a jewelry kit from your favorite place and assemble… just in time for the Halloween season. This…
This is OogieBoogie model reimagined to make him a little more scary enjoy!
This keychain captures the playful essence of Oogie Boogie from 'Nightmare Before Christmas'. Its friendly design makes it an ideal conversation starter while evoking fond memories of the classic film. Purpose Ideal for fans of the movie,…
Raspberry Pi Cam holder - For Boggie's X-Axis Its a remix of Boogie's Cameraarm and Axis Also a remix of lab27 's “Prusa I3 MK3 Raspberry Pi Camera Mount" --------------------------------------------------- In total for the Pi cam holder,…
i had someone request me make them a 2'' hitch cover with oogie boogie head. i didn't have a filament in the color she wanted so i first started to print it in glow in the dark but she wanted it to be green during the day so i went out an…
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
250 x 30mm . The required support "esa" is in the air, Bambu A1 printer
The wife and I wanted to use our boogie boards for wall decorations (because I spent all our $$ on 3D printing…). But since it had to be all decorative, no regular old mounts would do! So now we have these lovely little palm trees holding…
Connect a linking system to the X Boogie Camera Arm using this fitting. Not necessary but I also made a wider screw as the to fit with the wider hole in the camera arm. The end hole on this fitting also has the same diamater hole. I…
Made to replace the broken clip on model WT13150 Boogie Board
Print this little fella with 3 perimeters and some infill. He is designed to save some space on your desktop. Have a nice printing. --- To assembly you will need: M4x16 screw … 2pcs M4 nut … 2pcs M4x20 wormscrew … 1pc
Download Ghostface Candle Holder - https://payhip.com/b/djGal Dowloand Oogie Boogie Bath and Body works candle holder : https://payhip.com/b/Kj6Vf
use sharpie to make the top lay black, also was made in ms paint
My cousin lost the original part. Fusion unfortunately does not have the right thread and I am lazy so the thread does not fit too tight. However this is does not matter when you tighten it properly as it ends up working alright. I…
Improved the robustness of the hinge by combining it with the switch plate. Visit our blog to see this and other projects we have completed https://realbaddad.com 3D Printed Fortnite Axes & Props -…
Modified the mount to fit the X Axis revision by Boogie. You will need to mount the camera close to the x axis and flip the webcam view in octoprint.
Added “2022” to the ornament.
Bobbleheads, it's my first model, I still have a lot to learn
Full file dowloand here : https://payhip.com/b/XdEiL Download 3D Printed Jack Skellington Spinning Magic Wand: https://payhip.com/b/QPE1x
I needed something to keep the custom "pen" I made for my daughter's BoogieBoard. The stock pen is much to long and pokey for a 2 year old, so I took a .5" dowel and cut it down, rounded the edges and made a blunt point. It worked great,…
Detailed 3D printable Chibi Todo Aoi From Jujutsu Kaisen Clapping Boogie Woogie figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Design of my tested and trialed tow boogie. Main body is made out of EPS foam with fiberglas on top. All non standard parts are printed from PETG. Hardware: Dual 6384 Motors Dual Flipsky Mini FSESC6.8 Plus Gong v3 19 mm Mast Seaflo…
One of the products I like is the Boogieboard "Jot" . They are reasonably inexpensive and I keep them where I want to jot down notes to myself or whatever. They have a couple of magnets on the back that kind of holds them to metal…
Kameraarm für die Boogie's X-Axis und eine Raspberry Pi Kamera
This is a holder for the Boogie Board VersaNotes stylus (model WT20225). It is made with a flat back to make attaching it to surfaces with double-sided tape easy! I also made a little indentation so that the spring in the QuickClear™…
Due to the small scale & fine curvature of the scoop, use the smallest layers possible to ensure a smooth print. I highly recommend sanding with fine-grain sandpaper to smooth off any burrs.
Bring a little spooky fun to your collection with this adorable 3D printable Oogie Boogie Figurine! Featuring his iconic mischievous grin, ghostly white costume, and a lucky red dice, this charming character is perfect for Halloween…
Detailed 3D printable Todo Boogie Woogie figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
A simple Oogie Boogie earring design with a knit pattern added.
Introducing…….AIRBOOGIE!!!! This is a remote control swamp boat/airboat, designed around a boogie board. After an initial test run I have made the following changes to the design : Additional clearance for the propeller on the cowl…
Jack, Sally, Oogie Boogie are characters from the Nightmare Before Christmas movies & books, made into rubber duck style models, closely replicating the Tubbz brand toys. These are sized to match the other sets I've created, so that your…
