2197 modeli
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
Wydruk około 4,23 €–5,16 € nettoWstępna wycena jednego wariantu
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
Those brave souls who risk madness and worse to keep the web (mostly) organized and stylized. They deserve all of our thanks, but also perhaps just a bit of good-natured ribbing. Print this model and give the CSS guru in your life the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here:…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
Wydruk około 15,11 €–18,47 € nettoWstępna wycena jednego wariantu
A Storm Trooper piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace
Wydruk około 5,75 €–7,02 € nettoWstępna wycena jednego wariantu
I recommend that you print the model with tree supports and rafts for bed adhesion. It can be heated and adjusted to fit the face more comfortably. I simply used a hair dryer. It is possible to drill holes for the retention string. I…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 7,59 €–9,28 € nettoWstępna wycena jednego wariantu
My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…
Wydruk około 24,50 €–29,94 € nettoWstępna wycena jednego wariantu
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
Wydruk około 20,23 €–24,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided to (re)mix CaseStudyno8s (https://www.thingiverse.com/thing:5377195) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own stormtrooper's collapsing lightsaber. So I remodeled the whole thing…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 12,62 €–15,43 € nettoWstępna wycena jednego wariantu
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Remixed from https://www.thingiverse.com/thing:3008571 Nozzle: 0.4mm Layer: 0.2 (Recommended) Supports needed Scale it as you like :)
Wydruk około 21,81 €–26,66 € nettoWstępna wycena jednego wariantu
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
My Version of a Mini Cooper Badge in Black and Red
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Coperchio di ricambio per tagliabordi a batteria 20V PARKSIDE PRTA 20-Li Replacement cover for cordless trimmers 20V PARKSIDE PRTA 20-Li
Wydruk około 5,07 €–6,20 € nettoWstępna wycena jednego wariantu
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Keychain model of Mini Cooper Logo.
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This is a remix of the Imperial Trooper Scout by Jace1969 to be a lego compatible minifigure head. I used supports under the chin. The visor on the helmet is quite thin so you might need to add supports for it as well, depending on how…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Hey there, back with another operator mask. Assembly should be fairly straightforward, but heres a few notes Eye Inserts go easier into the socket from outside to inside. If they dont seem to click into place for you, consider decreasing…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
CloneTrooper Pen Cup - remixed from https://www.thingiverse.com/thing:4535792 Original model reduced to 90% to match DarthVader Pencil Cup. Printed in Atomic PLA, 10% infill, no supports. Used variable layer height option.
Wydruk około 6,59 €–8,05 € nettoWstępna wycena jednego wariantu
Seems to make my prints better when I wear it
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
With this one I learned a lot about sculpting Text onto 3D Models. An original one groschen coin served as a template. I made them as a premiere gift for the drama production The Three Penny Opera by Brecht. Both G-codes are made with 5…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Samsung Galaxy A32 kryt na telefon s logem Mini Cooper. Kryt byl vytištěn z PLA na karbonové podložce s následujícími parametry: Materiál: PLA (Silver, White) Tiskárna: Ender 3 V2 neo Výška vrstvy: 0,2 mm Infill: 15% Rychlost tisku: 50-…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
The Pin was a very weak spot and would break (feedback from the community). This model fixes that issue. I added pictures of the strength analysis of both current models and the new one. Hopefully this proves to be the right combination.…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Z as cleaner. Ik heb het ergens gezien maar de afmetingen klopte niet voor de Core One, daarom heb ik ze aangepast. Ik heb 4 modellen gemaakt met een gaatje van 3mm, 3.1mm 3.2mm 3.3mm en 3.4mm. Zo kan je met product de as proper maken,…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Abstraktní obraz Stormtroppera na zeď. 3mf je nastaven na dvě barvy filamentu. Kvalita 0.30mm. Author Luděk Sušický.
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
A tree support working doorstopper, with a base. Utilizes brim to try and get support material on the base. You can adjust your tree support settings to get different results Requires 10 mm brim Tree supports (not auto painted) Reference…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Portachiavi da montare. Rappresenta il nuovo logo John Cooper Works.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
100x160mm sign, to let the world know your interociter is operational and available. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
copertura vetrino laser edile
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Operation Ivy band 3d logo My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Colour/layer changes built in. Note: Corner elements shown won't be printed as they are masked by negative space…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
A quick remix in tinkercad to add a loop so I can have this on my keys. ive printed in resin and FDM and both came out great. I did make the top infill quite high for strength
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Added a through a hole in his skull so that you can put it on a thread. Also made a flat bottom, and now it prints without supports. Filament - YOUSU Matte Dual Color PLA <3
Come to the slightly smaller dark side! Stormtrooper skin for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. The Mini 13 version of is Vader also available. Get it here:…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Remix del diseño creado por Kalunho3d que a su vez hizo un remix del diseño de vvk187 Las mejoras que he aportado al diseño son: Diseño del pecho del Stormtrooper para que se pueda imprimir con cambio de color (M600) Las piernas se…
Print your own scale model ARC Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM…
A 1:12 and 1:48 scale Stormtrooper miniature! This miniature is part of a set of 20 available for purchase on my website or on my Patreon until February 2025. The full version includes separated bases, pre-supports for resin printing, and…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A solution I came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions: Please be careful . The fins on the heat sink…
Ten model hełmu Stormtroopera został zaprojektowany z myślą o druku 3D oraz wiernym odwzorowaniu kultowego wyglądu znanego z uniwersum Star Wars. Projekt posiada wyraźne detale, gładkie powierzchnie oraz poprawne proporcje, co ułatwia…
Summary This is a model of a Austin Mini Cooper in a kit card style. Some characteristic details can be discovered. Equipped with separate exhaust and front & rear bumper :) After printing, the model can be assembled with the help of…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to the size you need, no Supports! Another version: https://www.printables.com/model/443953-ergonomic-pet-litter-scoop-no-supports New! Super Scooper Squared!…
There are actually a few of these very cool Scout Trooper models available here on Thingyverse, But hey, nothing like having plenty of choice ; )
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
A remix made for paperweight, for the weight I used 80% infill.
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
For the Simplified Version - I had to add cylinders to fill in the fragile suspension system shown below: If you are going to print it I would recommend the simple version.
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
Mini Stormtrooper Figurine - AMS version Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I really like the 5 color print, but the supports were a pain. So I redid the painting to the dark color scheme so it would only be 4 colors, which allowed me to use the 5th tool head for petg soluble supports. The supports got a bit…
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
A big thanks to Danny for providing the low poly model. I have done with it what I could. So hopefully it will be of use for your project. Good luck and do check the sizing suits your needs, Cheers Jace Print instructions Un printed as yet!
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the…
This puzzle box design is deceptively difficult. Locate the the solution plaque and restore it to the front of the barrel to display mastery over this fiendish challenge. As with all box-style puzzles, this design has a hidden…
Lego Storm Trooper Maxi figure At standard scaling, the assembled model stands 3.5" tall. You can decide how big you want to print it! Supports needed for printing. Have fun!
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
this is the Death trooper model but with a working death whistle inside. To get the best noise don't scale up or down. Blow at angle and make Shure the is nothing obstructing holes in it. it works best if you print in two parts then…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
Dummy 13 StormTrooper Armor Assembly : The assembly is similar to that of DUMMY 13 except for the legs. The hip piece must be assembled before the thigh piece. Attention to the assembly of the arms: the parts have a direction! BTW I made…
Thanks again to DrMckay for providing this awesome rendition of Rogue Ones Shore Trooper. I have stripped the components back and split them up to the best of my ability and it could do with some serious smoothing. Something I have yet to…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
Another cool model found over at FacePunch.com. Cheers Jace
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Print your own clone army! By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature. The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab.…
I made this Lego Star Wars Kama for Lego Clone Troopers. I modeled this using SolidWorks. Check out my account for more Lego Pauldron's and kama's.
Dummy 13 X Clone Trooper Phase I Update 23/02/2025 : New CloneTrooper Phase 2 print profiles! Do you recognize him? Here is my version of the Clone Trooper Phase I These clone soldiers, created from the DNA of bounty hunter Jango Fett,…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
Replacement storm trooper helmet encase you get a pretty badly squished and deformed one. One version has embossed vents/stripes just encase you prefer to paint them instead of decals. Feel free to use/modify/sell prints along as you…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Fits 6.5cm (diameter) x 5.5cm (height) planter.
Hello everybody, this is a collection / remix I did around christmas as a gift. I basically started off with the stormtrooper head https://www.thingiverse.com/thing:4267739 as kalunho3d's description supposes I used the hands and rod from…
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
