P
PrintablesRoland
DJI Osmo Pocket 3 - Stand (including .f3d)
Stand to place your DJI Pocket 3 safely on your desk.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
- Pobrania
- 556
- Polubienia
- 45
- Ocena
- 4,83
Wyniki wyszukiwania: osmo
570 modeli
P
PrintablesRoland
DJI Osmo Pocket 3 - Tesla Center Display Mount
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
- Pobrania
- 423
- Polubienia
- 73
- Ocena
- 5
P
PrintablesOleksandr Rudenko
Replacement Clip for Black Diamond Cosmo-R 350 Headlamp
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 200
- Polubienia
- 4
- Ocena
- 5
P
PrintablesSaSch
Cold Shoe Adapter/Stand Canon to Osmo Pocket
For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 5
P
PrintablesORDEEP
DJI Osmo Action 3, 4 or 5 Pro - Rugged Case
Supports up to two SD memory cards Assembly You will need six M3x30 screws.
- Pobrania
- 2070
- Polubienia
- 286
- Ocena
- 4,89
P
Printables3D Printing LaB
Alexa Echo Dot Cosmonaut Astronaut support
use the supports only for the upper slot for the LED and the helmet.
- Pobrania
- 1723
- Polubienia
- 273
- Ocena
- 4,89
P
PrintablesMiceciCZE
DJI Osmo Action 4 Holders
Holder for action camera in two versions with a diameter of 100 + 32 mm. It can be used in combination with double-sided adhesive and tightening tapes. Necessary components Osmo Action 4 Locking screw M5 nut Recommended material ASA /…
- Pobrania
- 1357
- Polubienia
- 77
- Ocena
- 4,67
P
Printablesemre
DJI Osmo Pocket 3 GoPro Mount
This is a remix of RiffleHatchs DJI Osmo Pocket3 GoPro Mount over thingiverse. Require a single M5 square nut. Use Snug Supports, ensuring they are positioned solely at the edge of the square nut slot and not inside it (refer to the photo).
- Pobrania
- 1342
- Polubienia
- 127
- Ocena
- 5
P
PrintablesYalper
Lens cover for DJI Osmo Action 5 Pro
Description: Introducing a cover specifically designed for the DJI Osmo Action 5 Pro. This piece not only provides excellent protection for your device but also features a knurled grip that enhances handling and installation. Features:…
- Pobrania
- 867
- Polubienia
- 62
- Ocena
- 4,83
P
Printablesbasuke
DJI Osmo Pocket 3 Head Cover
Simple camera head cover for DJI Osmo Pocket 3.
- Pobrania
- 737
- Polubienia
- 75
- Ocena
- 5
P
PrintablesDaniel De Silva
Rugged box for DJI Osmo Action 4 Camera
Rugged box for DJI Osmo Action 4 Camera This has more storage space, SD card / ND Filter Inserts than original. 6 x 30mm M3 bolts required - you can find these on Amazon & AliExpress. Note: You can use full or half threads, I think half…
- Pobrania
- 736
- Polubienia
- 87
- Ocena
- 4,86
P
PrintablesŠtěpán Zdražil
Dji Osmo Action 4 cam cover
Dji Osmo Action 4 cam cover
- Pobrania
- 691
- Polubienia
- 65
- Ocena
- 5
P
Printablesrjbram
Double Clasp Box for DJI Osmo Pocket 3 Creative Combo
orient the parts just as suggested by TheSamenameTwice. I glued small foam bits to the lid with hot glue to keep the parts from sliding around when the box is closed.
- Pobrania
- 672
- Polubienia
- 113
- Ocena
- 5
P
Printablesshaks
DJI Osmo Action 5 pro STEP
Découvrez le modèle 3D de la nouvelle caméra DJI Osmo Action 5 Pro 🎥 que j’ai recréée en détail ! Ce fichier est parfait pour vos projets de conception, d’impression ou de simulation. 🛠 Je fournis les fichiers dans plusieurs formats 📂 :…
- Pobrania
- 620
- Polubienia
- 41
- Ocena
- 5
P
Printableswolfone
Osmo Action 4 USB-C Cable Support
USB-C Door for cable support and to reduce cable strain on the Action 4 Cam. Found myself knocking around the camera cable a lot when livestreaming ergo this little block to help support the cable better. I've printed most of my test…
- Pobrania
- 611
- Polubienia
- 34
- Ocena
- 0
P
PrintablesJustin.D
DJI Osmo Action 3/4/5 Pro Handle Grip
Side handle for the DJI Osmo Action 4 camera. It will also work for the 3 and the 5 Pro To assemble, simply put the magnetic mount in the side of the handle (make sure it's the right way around). Then slide the safety pin in the bottom;…
- Pobrania
- 599
- Polubienia
- 69
- Ocena
- 4,8
P
Printablestippfehlr
Kosmos Experimentierkasten: Easy Elektro Start / Easy Electronic: replacement propeller
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
- Pobrania
- 569
- Polubienia
- 19
- Ocena
- 4,67
P
PrintablesKuna
DJI Osmo Pocket 3 round desktop stand
Modified version of the desktop stand, now with: - round base - cutoff for strap - fits charger/usb - small footprint - stable stand
- Pobrania
- 539
- Polubienia
- 40
- Ocena
- 5
P
PrintablesDVS
DJI Osmo Pocket desktop stand
I designed a new Osmo Pocket desktop stand because the others didn't like it. https://youtu.be/oLgojWxlXuQ Print Settings Printer: Micromake C1-mod Rafts: No Supports: No Resolution: 0,15 Infill: 20 Filament brand: Devil Design Filament…
- Pobrania
- 538
- Polubienia
- 65
- Ocena
- 5
P
PrintablesKeanu
Dji osmo pocket 3 desktop stand
Dji Osmo pocket 3 desktop stand, cut off the strap , works with handle charging port
- Pobrania
- 537
- Polubienia
- 47
- Ocena
- 5
P
PrintablesReallyrapid
DJI Osmo Action 4 Lens cap
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
- Pobrania
- 533
- Polubienia
- 60
- Ocena
- 5
P
Printablessimarzi
IFlight XL5 /7 Nazgul5 DC5/7 GoPro Hero & Osmo Action mount
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
- Pobrania
- 519
- Polubienia
- 47
- Ocena
- 5
P
PrintablesTomas_tnt
Vystřelovací kosmonaut/parašutista
Remake retrohračky “výsadkář” od IRISA Vsetín. Jako dítě jsem vystřelovacího parašutistu zbožňoval a jsem rád, že mi na jedné FB diskuzní skupině tuto hračku připomněli a já se vrhnul na remake. Pokusil jsem se dodržet koncept a rozměry…
- Pobrania
- 472
- Polubienia
- 106
- Ocena
- 4,75
P
Printablesuser01
DJI Osmo Action Case
case with hotshoe print in 2 parts prusa mini pla with support Category: Camera
- Pobrania
- 471
- Polubienia
- 45
- Ocena
- 0
P
PrintablesDevilscave
KTM Duke GoPro / Osmo Action Cam Mount
Habe hier eine GoPro bzw. DJI Osmo Action Cam Halterung für KTM Motorrädlenker mit 28mm erstellt die in der mitte aber eine 33mm Schale haben. Da speziell bei KTM die untere Lenkerbrücke einen Verbindung um das Lenkerrohr mit anderen…
- Pobrania
- 458
- Polubienia
- 81
- Ocena
- 0
P
Printablesshaks
DJI Osmo Action 6 STEP
Bonjour à tous, Je vous partage les fichiers de ma DJI Osmo Action 6. Je mets à disposition le STEP, le fichier SolidWorks et le STL pour que tout le monde puisse dessiner ses propres accessoires ou supports en toute liberté sans avoir à…
- Pobrania
- 445
- Polubienia
- 20
- Ocena
- 5
P
Printablesdrei-d-w
Rugged box for DJI Osmo Action4
Rugged box for DJI Osmo Action4. All parts (except handle) of the adventure kit can be fitted into this box. The lens protector in the picture is this model: https://www.printables.com/de/model/694351-dji-osmo-action-4-cam-cover
- Pobrania
- 427
- Polubienia
- 55
- Ocena
- 5
P
PrintablesJerry Lee
Simple Clip - DJI Osmo Pocket 3 cold shoe - Print-in-place
This is a very easy and simple clip on accessory for DJI Osmo Pocket 3. It adds a cold-shoe mount without adding much bulk. It maintains all functions and other attachments for your Pocket3. The gaps between all moving parts are 0.3mm. I…
- Pobrania
- 420
- Polubienia
- 59
- Ocena
- 5
P
PrintablesDr. Failov
DJI OSMO Pocket 3 Screen Fix Frame
Pocket 3 have common problem - sometimes screen spring stop working and screen gets stuck in middle position. Since spling placed in such place where it can't be reached for repair, one of possible solutions is to use my frame. What frame…
- Pobrania
- 416
- Polubienia
- 18
- Ocena
- 5
P
PrintablesChrisE
DJI Osmo Action Shorty Grip
Grips designed for go-pro didnt fit my DJI Osmo Action Camera - so i developed this "Shorty" Type Grip for DJI Osmo Action Camera. Requires only 1 Hex Nut - Fits with original DJI case and screw. Pass through for wrist strap and Lens Cap…
- Pobrania
- 416
- Polubienia
- 46
- Ocena
- 4,75
P
PrintablesKasper T
Lens cap for the DJI Osmo Action 4
A basic lens cap to keep my fingers off the Osmo lens. Printed in nice, ultrasoft TPE88 from Filament PM.
- Pobrania
- 409
- Polubienia
- 20
- Ocena
- 5
P
PrintablesKrhom
DJI Osmo Nano: TPU Bando Case with ND Support
See it in action! Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print…
- Pobrania
- 368
- Polubienia
- 29
- Ocena
- 0
P
PrintablesPhoryan
DJI Osmo Action 5 Pro Handle
I used an M5 brass insert for the threads, if requested I can provide a model which utilizes a nut instead To ensure strength requirements please print at recommended settings or higher, Print settings: Walls - 6 Top - 6 Bottom - 6 Infill…
- Pobrania
- 359
- Polubienia
- 51
- Ocena
- 4,75
P
PrintablesMartin
DJI Osmo Pocket holder
This GoPro mountable holder is for the DJI Pocket. Worlds smallest 3d Gimbal with 4k. The Pocket is just released (December 2018), but currently, DJI is not offering the universal mount. It will be available within a few weeks. When I…
- Pobrania
- 351
- Polubienia
- 46
- Ocena
- 4
P
PrintablesRobert Wiśniewski
DJI Osmo Pocket 3 sun screen protection
Printed with 0.4 nozzle, 0.2 leyer height, perimeter, 15%. If You like it - like it :)
- Pobrania
- 343
- Polubienia
- 50
- Ocena
- 5
P
PrintablesKrhom
DJI Osmo Nano: Placeholder
Made this to help with the design of TPU mounts for my camera.
- Pobrania
- 328
- Polubienia
- 19
- Ocena
- 0
P
PrintablesRiese
DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360)
DJI Osmo Nano Lens Cap – Flexible TPU & Rigid ASA Versions (STL + Fusion 360) Description: This is a custom-designed lens protection cap for the DJI Osmo Nano. It’s available in two variants, optimized for different materials: TPU version…
- Pobrania
- 328
- Polubienia
- 27
- Ocena
- 5
P
PrintablesFACTORYCT
DJI Osmo Action 4 insert
This insert is for the DJI Osmo Action 4 camera. This insert goes into the Rugged Hard Case (see link below for download). This is one of many inserts for the Rugged Hard Case. https://cults3d.com/:1767379
- Pobrania
- 328
- Polubienia
- 64
- Ocena
- 0
P
PrintablesKöter
DJI Osmo Action 4 Softcase with Adapter Mount
Hi! Here you find a softcase for the DJI Osmo 4 Action Camera with the standard screw mount. I printed it with Soft TPU (Shore 90) and also with the “normal” TPU (shore 95). I printed it with organic supports. Please feel free to comment,…
- Pobrania
- 321
- Polubienia
- 29
- Ocena
- 5
P
PrintablesDutchWorkX3D
DJI OSMO Pocket 2 box and accessories inlay V1
I remixed a supportless box and created/designed the inlay myself.
- Pobrania
- 321
- Polubienia
- 75
- Ocena
- 5
P
PrintablesCotyoran
DJI Osmo Action 4 Lens Protection Cap
DJI Osmo Action 4 Lens Protection Cap -It is the cap for protection the lens of the camera. -I added both with logo and without logo versions. -Also STEP version is added for future improvements. -Cap may fit your lens tightly at first.…
- Pobrania
- 309
- Polubienia
- 37
- Ocena
- 5
P
PrintablesDayNight
DJI Osmo Pocket 3 Backpack Mount
A DJI Osmo Pocket 3 backpack mount. Can also be mounted on GoPro mounts. Based on @Rimzler's model. With an open bottom for the USB port. This makes external connections possible. An incision was made for the joystick.
- Pobrania
- 298
- Polubienia
- 22
- Ocena
- 5
P
PrintablesCherneazy
DJI Osmo Pocket 3 | Simple Grip System
I am going on a trip soon and wanted a simple grip that I could use with my DJI Osmo Pocket 3, and I couldn't find one. So, I went ahead and made one using parts from other models I found along the way (linked at the bottom). This grip…
- Pobrania
- 296
- Polubienia
- 39
- Ocena
- 5
P
PrintablesBrowl
![[v2] DJI Osmo Nano: Case TPU avec support ND](https://media.printables.com/media/prints/65551a69-1012-4635-82c8-3bfc27f435c4/images/10862395_c166c443-42cf-4c70-bdaf-7054e5889cc5_569c2a08-e9f6-4637-8902-baa3e14e8cf8/2025-10-10_6ae1ef5a405778.webp)
[v2] DJI Osmo Nano: Case TPU avec support ND
La modification d'un modèle créé par Krhom pour la DJI OSMO NANO. Petite modification de ma part pour l'adapter sur une griffe GoPro.
- Pobrania
- 296
- Polubienia
- 15
- Ocena
- 5
P
Printablesltanailov
Cosmofen luer-lock cap
This is a cap for COSMO CA superglue that allows you to use luer-lock (or luer-slip) needles for more precise glue distribution.
- Pobrania
- 296
- Polubienia
- 43
- Ocena
- 5
P
PrintablesPirindirin
Cosmoctopus Insert/Organizer
This is an insert for the board game Cosmoctopus by Paper Fort Games. This insert allows for the tentacle resource organizer that came with the Kickstarter version of the game to be stored at the bottom. Just in case you don't want to…
- Pobrania
- 275
- Polubienia
- 29
- Ocena
- 5
P
PrintablesJohn Ski
Simple Clip - DJI Osmo Pocket 3 - GoPro mount
Remix of @Jerry_Lee 's model. I replaced the cold shoe with a GoPro mount. Thanks Jerry!
- Pobrania
- 274
- Polubienia
- 19
- Ocena
- 5
P
PrintablesJocke Selin
DJI Osmo Pocket Multi Holder (GoPro/Arca-Swiss/Tripod/1/4"-20/Cold shoe)
Holder for original DJI Osmo Pocket to mount it onto various other holders. Compatible with Arca-Swiss clamps, GoPro finger mount and standard tripod mount (1/4"-20 nut required). Also has two cold shoes on the side to facilitate…
- Pobrania
- 273
- Polubienia
- 38
- Ocena
- 5
P
Printablesfurrfu
DJI Osmo Action cam lenscap
A small lens cap for the DJI Osmo Action action camera. Knurled edge, embossed “DJI” on the front to remember what it is the lens cap for. One version with eyelet for attaching a loop of string, one without.
- Pobrania
- 263
- Polubienia
- 41
- Ocena
- 5
P
PrintablesNorbert Harrer
Propeller and Peg for Kosmos Easy Elektro Construction Kit
This is a replacement propeller and peg for the Kosmos Easy Elektro Construction Kit. I have created three versions of the peg with different hole diameter. The 2.3mm version worked perfectly for me, as it needs to be a tight fit on the…
- Pobrania
- 262
- Polubienia
- 12
- Ocena
- 5
P
PrintablesYo DesigNerd
DJI OSMO Mobile 7P rugged case
🎒 DJI Osmo Mobile 7P Rugged Case – Ultimate Travel Protection 💪🎥 This rugged case is designed to safely carry your DJI Osmo Mobile 7P and turns it into a complete vlogging kit on the go! The model only contains the case. As I don't have…
- Pobrania
- 254
- Polubienia
- 25
- Ocena
- 5
P
PrintablesDutchWorkX3D
DJI OSMO Pocket 2 box and accessories inlay V2
I remixed a supportless box and created/designed the inlay myself. Bigger version for more accessories.
- Pobrania
- 251
- Polubienia
- 41
- Ocena
- 5
P
Printablesfirstgizmo
Cosmo Planter Face Mod
Gives Cosmo some additional expresions and a face, which can be printed on its own. Printing: Print all parts in the given orientation with 0.2 layerhigt. No support needed. A manual color swap for the faces gives a nice look to them.…
- Pobrania
- 249
- Polubienia
- 248
- Ocena
- 5
P
Printablessimarzi
TBS Source One Gopro Hero DJI Osmo Action Mount
TBS Source One Gopro or similar Actioncam mount. You don't need support or raft. You do need to print it in TPU for durability. Update: I have added a small cutout so that the battery sticker fits better If you like my design and would…
- Pobrania
- 242
- Polubienia
- 22
- Ocena
- 0
P
Printablesbasuke
DJI Osmo Pocket 3 Lens Adapter Case Type A
A case which can hold Pocket 3's lens adapter in it with magnetic hold. It can be attached to the strap string.
- Pobrania
- 241
- Polubienia
- 28
- Ocena
- 5
P
PrintablesKasper T
Case for DJI Osmo Action 4
Generated with this: https://www.printables.com/model/748647-case-generator A transportation case for the Osmo Action 4 camera, complete with “foam” liner. Cutouts fit the camera, the 3-battery charging box, and has room for a short USB-C…
- Pobrania
- 237
- Polubienia
- 41
- Ocena
- 0
P
PrintablesGenius
DJI OSMO Pocket 3 handle with dji mic 2
improve the grip during hand held shot
- Pobrania
- 233
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSergii Kostyshyn
DJI Osmo 360 mount
Brand new camera from DJI and lack of solutions. So, as owner of this camera, did 3d scan of real camera, also some design with standard GoPro mount and also for Manfrotto tripod mount too. So should be more universal.
- Pobrania
- 233
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMiro
DJI Osmo Action 5 Pro FPV mount
This is a very basic DJI Osmo Action 5 Pro mount for FPV drones with GoPro-style legs. Can be used with that protective rubber ring on lenses but it's not really designed for it. So, you better take that rubber thingy off. I printed it…
- Pobrania
- 226
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJan Hellerman
Dji Osmo Pocket 3 podstawka stołowa
Polecam do kamery
- Pobrania
- 226
- Polubienia
- 13
- Ocena
- 5
P
Printablesfns720
Dust cap with USB-C cable slot for DJI Osmo Action
This is a protective cap for DJI Osmo Action's port slot with a USB-C cutout which lets you to charge the camera while protecting the port from the weather. Usage: remove the port door from your DJI Osmo Action put the camera to its…
- Pobrania
- 221
- Polubienia
- 21
- Ocena
- 0
P
PrintablesRodrigo Sclosa
DJI Osmo Action Skull Cage
Inspired on the work of @drunkmaster, I made this mount cage for DJI Osmo Action. I've made a universal version with Zip Ties for mount on any FPV Drone. Also, I've made a GoPro pads version and a clear version if you wanna make your own…
- Pobrania
- 218
- Polubienia
- 25
- Ocena
- 0
P
PrintablesFranck G
DJI Osmo Nano Case
Une petite boite pour transporter une DJI OSMO NANO, et ses filtres ND (génériques) Deux modèles : un Modèle en L : style, faible encombrement, 5 slots pour filtres ND un Modèle en Cube : traditionnel, 7 slots pour filtres ND Les filtres…
- Pobrania
- 217
- Polubienia
- 21
- Ocena
- 0
P
PrintablesKimframes
DJI Osmo Pocket charging & file transfer stand
High stand for the Osmo pocket to allow for easy access to both the USB-C port and the screen. Two sizes included.
- Pobrania
- 208
- Polubienia
- 24
- Ocena
- 5
P
PrintablesAAME
DJI Osmo Pocket desk stand
Printed in pla without supports Print instructions Unassociated tags: osmo pocket Category: Camera Summary Printed in pla without supports
- Pobrania
- 208
- Polubienia
- 44
- Ocena
- 5
P
PrintablesFACTORYCT
ND filter insert for DJI Osmo Pocket 3 case
This is an insert designed to hold ND filters for the DJI Osmo Pocket 3 camera. Each insert holds 2 filters. You can download the original DJI Osmo Pocket 3 case here: https://cults3d.com/:1956719
- Pobrania
- 206
- Polubienia
- 80
- Ocena
- 0
P
PrintablesTom Poncelet
DJI osmo action 6 lens protection
A DJI lens protection for DJI osmo action 6
- Pobrania
- 202
- Polubienia
- 13
- Ocena
- 5
P
Printablesclunkclunk
Xbox Series X S Controller Battery Cover for Fosmon Charger
This is a super simple remix of DesignedByHudson's Xbox Series X or S controller battery cover with a small hole for the charging pins of the Fosmon Dual 2 MAX Charger. I imported the 3mf file in to swiftconverter.com to output an stl…
- Pobrania
- 202
- Polubienia
- 20
- Ocena
- 4,67
P
PrintablesjSamz12
Cosmo - Friendly Desk-Bot
I made this guy kind of as a mini catch-all. I always have little parts and pieces laying around my desk. Dummy 13 hands and parts are printed fairly often over here due to a 5-year-old son lol. You may need a small amount of support on…
- Pobrania
- 200
- Polubienia
- 94
- Ocena
- 5
P
PrintablesRalfD
DJI Osmo Mobile 3 Microphonholder for RØDE VideoMicro
It's a holder for a RØDE VideoMicro at the DJI Osmo Mobile 3 Gimbal
- Pobrania
- 198
- Polubienia
- 23
- Ocena
- 5
P
Printablestryptech
Removable Wide Frame for Haute42/Cosmox G-Series and S-Series
Removable frame for the Haute42/Cosmox G-Series and S-Series all-button leverless controllers. Frame slides into itself for compact storage. Model has spots for 10x3mm (G-Series) or 8x3mm (S-Series) disc magnets for added security. Barely…
- Pobrania
- 197
- Polubienia
- 24
- Ocena
- 5
P
PrintablesStonefire
DJI Osmo Mobile 7P Tray
This is a case that will fit the case designed by YoDesigNerd DJI Rugged Case for Osmo Mobile 7P Printed on MK3.9 with 0.4 nozzle and 0.2mm layer heights.
- Pobrania
- 194
- Polubienia
- 11
- Ocena
- 5
P
PrintablesLingChristian
Starfarers of Catan / Sternenfahrer von Catan - Booster Ring - Propulsion Holder - Original from Kosmos
- Replacement for the broken propulsion holder from the mothership of the Starfares of Catan Boardgame (old version). - This is the original STL-File that comes from Kosmos. They provided in the expansion pack for 5-6 Player two of the…
- Pobrania
- 192
- Polubienia
- 23
- Ocena
- 5
P
PrintablesTim O'Brien
DJI Osmo Nano Bold-Down FPV Mount Project
Companion project to my other parametric configurable FPV designs: FPV Pod | O4 O3 Frame Action2 , 3,4,5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your GoPro Hero 6 through 13 camera with the best mount in FPV! Max protection with…
- Pobrania
- 183
- Polubienia
- 17
- Ocena
- 5
P
Printablesciamciam_w
handlebar bike Quick-Release mount for DJI Osmo Action
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5 Few things that you need to know befor start printing: there are 2 types of diameter of…
- Pobrania
- 183
- Polubienia
- 33
- Ocena
- 0
P
PrintablesJokerman518
DJI Osmo pocket 3 base
The strong 2 side tape im using is CREGEAR Double Sided Tape Heavy Duty (9.85 FT/120in), Transparent Nano Tape, Clear Mounting Tape Strong Adhesive Strips, Multipurpose Wall Hanging Sticky Carpet Photo Frame Poster https://a.co/d/6fxJBPi
- Pobrania
- 183
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMartin
DJI Osmo Pocket GoPro Mount
if you want sidelock version, you can find an update from this design here: https://www.thingiverse.com/thing:3335202 This GoPro mountable holder is for the DJI Pocket. Worlds smallest 3d Gimbal with 4k. The Pocket is just released…
- Pobrania
- 182
- Polubienia
- 25
- Ocena
- 5
P
PrintablesScopuli
Battery Case for DJI Osmo Action 3/4/5 batteries
Battery case for 3x DJI Osmo Action 3/4/5 batteries and 2x micro sd cards.
- Pobrania
- 180
- Polubienia
- 48
- Ocena
- 5
P
Printablesripht
dji osmo action 3/4/5 MTB helmet mount
This patch was designed for fitting my dji osmo action 5 to my Rogelli Tecta mountainbike helmet. You can use the original magnet mount plate and an M5 narrow nut.
- Pobrania
- 180
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSteveS42
Push-to-Connect Tool for Reverse Osmosis
My reverse osmosis water system uses 1/4" and 3/8" push-to-connect fittings. These fittings are easy enough to connect, but slightly harder to release. You have to push in the little ring part and pull the tubing at the same time. Larger…
- Pobrania
- 177
- Polubienia
- 30
- Ocena
- 5
P
PrintablesFACTORYCT
Micro SD card insert for DJI Osmo Pocket 3 case
This is an insert designed to hold micro SD cards for the DJI Osmo Pocket 3 camera. Each insert holds 2 micro SD cards. You can download the original DJI Osmo Pocket 3 case here: https://cults3d.com/:1956719
- Pobrania
- 177
- Polubienia
- 77
- Ocena
- 0
P
PrintablesDanielW
DJI Osmo Pocket 3 Clip Holder - Multimaterial
Holder for the DJI Osmo Pocket 3 Gimbal camera, so you can clip it to your jacket or back-bag straps. Its designed with multimaterial: the outer shell is in PLA and the inner lining in TPU. So you need a multimaterial capable printer like…
- Pobrania
- 176
- Polubienia
- 21
- Ocena
- 0
P
PrintablesDJ
DJI Osmo Mobile 3 stand
You can buy a stand for the Osmo Mobile 3 for around €20 or you can print it in 2 hours :-) It works great. Note that this is a re-upload of a model that I could not find on Printables but as it works so well it should also be here! :-)
- Pobrania
- 174
- Polubienia
- 17
- Ocena
- 5
P
PrintablesTim O'Brien
![Simple Osmo Pocket GoPro Mount(s) [UPDATED]](https://media.printables.com/media/prints/142912/images/1352428_8c8e38c1-439a-4c30-a3a6-4caa518911ea/aa9041202ec987d4a82b999a2d145be3_display_large_14.jpg)
Simple Osmo Pocket GoPro Mount(s) [UPDATED]
Got your fancy new gimbal but can't mount it anywhere? Print one of these! 2019-12-13 Update 3: Adding a 'backpack clip' mount for all your hiking and hyperlapse needs. Even includes two* lanyard mounts for safety lines– one on each side.…
- Pobrania
- 173
- Polubienia
- 21
- Ocena
- 0
P
PrintablesJustin Spanier
DJI Osmo Pocket Mount
I've been using these models for years now and am finally getting around to uploading. Regular and selfie versions available. The only difference is on which side the mount is located. Fits with the adapter attached. Also has an opening…
- Pobrania
- 170
- Polubienia
- 23
- Ocena
- 5
P
Printablesshaks
DIY HardCase for dji osmo action 6
Hardcase DJI Osmo Action 6 Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une robustesse…
- Pobrania
- 169
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMakeroni
DJI Osmo Action 4 GPS Bluetooth Remote Controller bracket
I didn't like DJI's solution of attaching the remote control to the handlebars of my bike using the strap. It was too cumbersome and always got twisted when operating it. That's why I designed this very simple holder that can be attached…
- Pobrania
- 168
- Polubienia
- 23
- Ocena
- 5
P
Printablesnerovalerius
Low-Profile Baseball Cap Mount for DJI Osmo Pocket / Nano
Features: Low-profile, stable fit Works with most baseball caps Ideal for POV shots and hands-free filming Print without supports Recommended material: PETG or ABS
- Pobrania
- 167
- Polubienia
- 19
- Ocena
- 5
P
PrintablesDoNotPanik
DJI Osmo Pocket 2 Universal Phone holder
DJI OSMO Pocket 2 Universal Phone Adapter It should fit the majority of the phones No supports Needed You may use rubber
- Pobrania
- 166
- Polubienia
- 28
- Ocena
- 3
P
PrintablesAlexander Kromm
DJI Osmo Action Case
The inlay is printed in TPU to protect the screen; case in PETG I used a nail as hinge and one m3 screw
- Pobrania
- 162
- Polubienia
- 20
- Ocena
- 0
P
PrintablesTol
DJI Osmo Action rain and dust USB/MicroSD cover lid for cyclists
I made these lids because I like to record my bike trips using a powerbank and sometimes I have to do it under rain. This camera has a combined USB and MicroSD lid which is very bad if you are going to use the camera under rain with a USB…
- Pobrania
- 162
- Polubienia
- 23
- Ocena
- 5
P
Printablesrluca96
DJI Avata2 gopro osmo action mount
Based on KPalivec design. Removed the bolt section and added a native "gopro mount". U just need an M5 nut and of course an M5 bolt. For increase aereodynamic i can suggest to use a "classic" bolt instead of the one with the handle. I…
- Pobrania
- 161
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBastelsaal
Adapter: Elgato Prompter and DJI Osmo Pocket 3
This is an adapter to mount an DJI Osmo Pocket 3 to an Elgato Prompter. Watch my video for more details: https://www.youtube.com/watch?v=MmlzIaYuW3Q
- Pobrania
- 160
- Polubienia
- 14
- Ocena
- 5
P
PrintablesDragonArtist15
Kosmoceratops Figurine
1:36 Scale model of a kosmoceratops. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin printer.…
- Pobrania
- 160
- Polubienia
- 31
- Ocena
- 5
P
PrintablesJonah Albert
Nebula Cosmos Laser stand
Designed specifically for the Nebula Cosmos 4K Laser projector. Works great with PLA but you do need a fairly large format printer for it. Mine came out great on my Elegoo Neptune 4 Plus. Takes about a day and a half for both parts at…
- Pobrania
- 159
- Polubienia
- 5
- Ocena
- 5
P
PrintablesAAME
DJI Osmo Pocket AIO accessory
Update Added a design with 1/4 nut pocket.. still in beta Update: Added version with lanyard hole. All In One accessory: stand handle tripod mount for DJI Osmo Pocket. Print it in TPU. Print instructions Unassociated tags: osmo pocket…
- Pobrania
- 158
- Polubienia
- 12
- Ocena
- 5
P
PrintablesMartin
DJI Osmo Pocket Holder with sidelock and Gopro mount
Updated from https://www.thingiverse.com/thing:3290620 Changes: Side-lock for easy insert of the Osmo Pocket GoPro mount moved to the top of the holder Loose fit, so you can use some soft materials inside the mount to prevent scratches.…
- Pobrania
- 152
- Polubienia
- 11
- Ocena
- 0
P
PrintablesTheTrain
Haute42 COSMOX Low Profile key caps for Mini and B16
These are switch caps for Cherry MX, mid-height MX style switches and low profile Cherry + Kailh choc v2 switches. There are two styles included here: - Haute42 MX LP keycap - Haute42 MX LP keycap 2 The ‘Haute42 MX LP keycap 2’ version…
- Pobrania
- 151
- Polubienia
- 15
- Ocena
- 0
P
PrintablesEmjayking
Mysterium Cosmographicum
This is a replica of the Mysterium Cosmographicum from the astronomy book by Johannes Keppler. My friend dared me to try and create this model. So I tried, I should be able to be printed without much support. There is a full model and a…
- Pobrania
- 146
- Polubienia
- 6
- Ocena
- 5
P
Printablesshaks
HardCase for dji osmo action 6 Gopro mount + Vertical
Hardcase DJI Osmo Action 6 gopro mount Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une…
- Pobrania
- 145
- Polubienia
- 9
- Ocena
- 0