Liczymy pasujące modele…
Description A Magpul style handguard for the WE Apache. Installation You may need to drill out the front pin holes to 6/6.5mm to get a snug fit. I've drilled the left hole out to 6mm and the other to 6.5mm to get a good tight fit. There…
Wydruk około 6,92 €–8,46 € nettoWstępna wycena jednego wariantu
špachtlička na nanášení lepidla, glue spatula
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
30% infill 0.20 detail http://www.thingiverse.com/thing:3406899
This is a remix of the sensation that is the Flexi-Rex to represent the Pachycephalosaurus (headbutt dino). It also looks like a Stygimoloch, if that's your preference. Prints just as easily as the Flexi-Rex.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
well… Here's the Apache, my all-time favorite helicopter. It's designed at 1:50 Scale, which matches up PERFECTLY with my Abrams SEP V4 I did some time ago. Assembly should be pretty easy, and I've already placed every part in the best…
to spread or mix glue paint grease adhesive epoxy silicone - use PETg for flexibility
Das Tool ist zum ersten groben reinigen der Grill Kontakt Platten des Optigrill und Optigrill Elite im kalten Zustand nach dem grillen, um die angebrannten Reste problemlos zu entfernen. Mit Küchentüchern sind die Gnupsis damit das…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad These are inserts (and corresponding lid badges) to build a 100 round weatherproof ammo case out of Harbor Freight's…
3x clips, and 1x each of the mounts. PETG seems to work well. I used something called “chicago screws” to flat mount it to the box (can make water resistant by adding rubber washers to them). Public domain, do whatever you want - sell it,…
Apache 3800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
Apache 2800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
Spacer for clean mounting of Polk 6x9 on the Apache 2800.
Designed for the Apache 1800 case, for one NVX® NSP46 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
Organizer for the Apache 2800 case from Harbor Freight. This insert is broken into four sections because I printed it on a Prusa Mini. We use an Apache 2800 as a dry box while boating, and wanted to keep our phones, keys, wallets etc..…
UPDATE - Latest Version on MakerWorld. This is a remix of Bigbore729's MCS chassis and Apache chassis models. The original Apache chassis needed some updating but the original CAD files were lost. I worked backwards from the MCS chassis…
Static model for use on 1/10 scale RC vehicles. Is hollow so you could put objects inside if you wanted but it does not hinge open. Prints in 3 pieces (open/flat side down) to be glued together with superglue.
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad These are inserts (and corresponding lid badges) to build a 100 round weatherproof ammo case out of Harbor Freight's…
Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…
Apache 1800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
This remix of Zack Freedman’s Hextraction Pachinko Tile was done to replace the filament pegs with M2 screws. The fillets around the ball channels were edited slightly for a smoother appearance & the built-in sacrificial support was…
Rychle vytištěná špachtle na čištění tiskové podložky bez poškození. Doporučuji tisknout alespoň 0.16.
Scientifically accurate model of a pachycephalosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with…
Hello fellow makers! This model is inspired by @Granite_619387 Apache 1800 box found here: https://www.printables.com/model/477096-harbor-freight-apache-1800-box-divider-organizer I created it from scratch because I wanted a similar…
The Boeing AH-64 Apache is a twin-engine attack helicopter used by the U.S. Army and many other countries. It is designed for close combat and can operate in all weather, day or night. It is known for its advanced targeting systems,…
Apache 4800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
The cutest little Pachimari that you ever did see <3
Simple enough to modify in the editor of your choice. A simply sized name plate for your Harbor Freight Apache 2800 hard case. I use this case for flying with my medical device and associated materials. The lettering is embossed with a…
designed for a dual skar 6.5 setup on a 3800 box
First I want to say that gamebox13 did an incredible job on the original model. I printed this model with a 0.2mm nozzle at 0.1mm layer height. I printed the cab body of the truck in white, while I printed the wheels and the undercarriage…
This is a spacer for used for mounting a Galeforce 6x9 speaker into the lid of an Apache 2800 series case. Normally printed in TPU for flexibility and durability, but can be printed in any material. Recommended 15% infill, 2 walls if…
Designed for the Apache 1800 case, for one Polk db462 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
This is a bracket for the Apache 3800, mostly sold by Harbor Freight, that provided mounting holes to mount a face plate to the bottom of the case. For Cyberdeck's, Ham Radio, or any other need you can think of. These brackets are most…
These plates are designed to offer customization options to those who wish to add their own logo. They are print-ready and available in two variations - non-chamfered and chamfered edges. Print at 100% infill. Have a logo you would like?…
This is a spacer for the Belva 8" speaker for an Apache 2800 case. It is printed in ABS
Ein Schaber um das Druckbett zu Säubern
Designed for the Apache 3800 case, for two Recoil MX65 drivers. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x16mm screws. Speakers are…
This is my Cyberdeck Build on a HF Apache 1800 Case. I wanted to Share the source as well as the STL files for this. Designed in an ancient copy of sketchup make.
Kleine Spachtel + 10 mm Gabelschlüssel. A small material-friendly spatula including a 10 mm open-end wrench. Support: No Infill: 40%
Use this STL to customize your own name plate for your Apache 4800
I found a good 3D scan (made with an Artec Spider) of a dinosaur toy and improved the file. I cut a small plane so the feet are flat for better printing and sculpted some parts. I added an improved color file too, I removed some writing…
This model is really a remix of a remix that I did and a model I did: 1968 Chevy Towtruck 1/64 Scale by Tyler Wiebe | Download free STL model | Printables.com 1957 Chevrolet Apache 1/64 Scale by Tyler Wiebe | Download free STL model |…
This is my attempt at the AH-64 Apache Helicopter. It prints as one card with all pieces on it. once the pieces are cut or snapped out of the card they can be assembled to form the helicopter. The masts where the rotors go may need to be…
These are the files for the ham radio go-box that I made for my Yaesu FT-891 HF ham radio. The box I used is the Apache 4800 case from Harbor Freight. A full list of materials I used for this box can be found in the description of the…
Hock for IKEA Skadis. I uses this hook for scraper. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15
Customized nameplates for the Apache weatherproof protective cases from Harbor Freight or Strongway from Northern Tool. This is a replacement for the plastic piece located near the handle. Its angled edges make it easy to secure in place…
Easy an practical putty knife. I uplaoded the desig process on youtube :)
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
Not my design just modified it into four separate parts so it could be printed on smaller printers. Original description- “Organizer for the Apache 2800 case from Harbor Freight. This insert is broken into four sections because I printed…
Based off the grill system style of @DylanKirby_2875644, designed to work with these passive radiators that have a 90mm OD and 85mmx85mm bolt spacing: https://a.co/d/8TZ2zYL Jig locates on the case ribs to provide drill locations and a…
Anschlagwinkel für die Führungsschiene der Scheppach Tauchhandkreissäge. Anschlag 90° oder 45°, mit M6 Schraube und Mutter Fixierbar. Gedruckt auf einem FLSUN V400 ABS 255°/100° Infill 15% Gyroid Stützstrucktur aktiv
Hello everyone, This is my design for a Pachycephalosaurus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
LEGO GMC 1955 APACHE 100
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
Scheppach Akku Halterung (MGT410) für das ordentliche Aufhängen von Akkus der Fima Scheppach sollte auch für Akkumodel: BA2.0-20ProS passen / Scheppach battery holder (MGT410) for neat hanging of batteries from the company Scheppach…
Designed for the Apache 1800 case, for one DD audio RL-X5x7 driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 8 m4 heat set inserts, and is mounted with 8 m4x8mm screws. The jig has…
Hardware Two small pins, I used a sewing needle cut down. Two small springs, about 4mm diameter. (One for the mag catch and one for the BB stopper) One BB Printing Print on the edge as shown in the photos. No support needed Assembly Put…
This is the holder to attach this awesome Featherboard to the Scheppach HS105 table saw, might also fit on other table saws
Hi there, Presenting my latest “masterpiece”: a spatula and glue spreader set! I've kept the model as tiny as possible to save your precious filament and minimize print time. After all, who wants to wait forever for a few handy tools,…
Mit dieser dreiteiligen Spachtel kann Filament gut von der Druckplatte entfernt werden. Eine Schutzhaube verhindert wegschießende Filamentreste. Optional kann auch nur der Schraubenunterleger ohne Schutzhaube verwendet werden. Ich habe…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is an insert (and corresponding lid badge) to build a 100 round weatherproof ammo case out of Harbor Freight's…
Vytvořeno v Blenderu. Velikost 70x50x22mm. Model je dostatečně pružný a odolný ze zakulacenými rohy , aby nedošlo k poškrábání podložky (jedná se o PLA, takže při větším ohnutí může prasknout, lepší by bylo použít PETG, ale PLA je…
Ribs have been slightly oversized for clearances. Note, the body of this model is round pipes, with a midsection through the Z origin. Your cut operation only needs to be Z+. Does not contain the center badge. Test printed and fit on…
Customizable Tag for your Apache Cases
I bought an FDE Apache 4800 case from Harbor Freight and I wanted to customize the look/feel of the default latches. Print on a side so you dont need supports and you get the most strength. I used 0.2 mm layers with 5 layers for…
Ein Werkzeug welches ich Täglich in meinem Unternehmen verwende. Z-Höhe sollte 7mm betragen, um ordentliche schnitte setzen zu können. A tool that I use daily in my company. Z-height should be 7mm to be able to make proper cuts.
1:24 Scale model of a pachyrhinosaurus. The model features detailed scale and skin texturing along the model. I created three variants of the model: standing, and two posed. I recommend printing it at a finer layer height or with a resin…
I stripped my oem gears and couldn't get replacementr parts so I just printed them. Made prototype out of PLA and it seems plenty strong. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…
PrusaSlicer project file provided. Use as you want to.
This is a custom insert system for the Apache 1800 Case designed to securely store and organize 9mm ammunition . The model was dimensioned using 115 grain FMJ 9mm Luger rounds and holds a total of 300 rounds (150 rounds shown in photos).…
Spring board for the Scheppach table saw. As a suggestion I took feather-board-fur-bosch-gts-635-216. Everything else is redrawn and created. 2x M5x30mm screws and 2x M5 nuts are required for assembly. The screw head/nut must have a width…
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
A replacement insert for a Schepacht hs100s table saw. I made my final print in ABS and glued the two parts together with a small amount of aceton. You may need to add small supports to the screw insert and the top clip. The dovetail…
Material: TPU95 Druckereinstellung: Layerhöhe 0,2 mm / Infill 40 % / No Support TPU A95 von 3DJake Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also printable with Bowden extruder…
What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…
A-36 Apache I've made two versions of this model—one optimized for small prints (about 9×7 cm) and another for high-quality, large-scale printing. The larger one has a lot more details and includes landing gear, flaps, and more. I'm…
After tinkering around for a bit, and finding only inserts that were AI generated or did not fit quite right, I downloaded the cardholder model remix from markopolo311 (thingverse) and gutted the middle out. I then keystoned a sold block…
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
UPDATE 10.11.2023 Added a new model for other Einhell tools with grabs and integrated supports. Print this file if the tool is NOT the table saw Original description It turned out that JCB batteries fit almost perfectly the EInhell tools.…
The pictures are of the 1/32" thick wall version. Also available are the 3/64" and 1/16" thick walls. I am using the soft blue insert that comes with the case as a lid tray and to hold the contents of everything else in place. I had to…
Custom-fit lower insert template for the Apache 3800 case . Precision Fit: Includes a 1° taper to match the case walls. Customizable: Designed as a base for you to build your own organizers or tool trays. Valve Compatibility: The "RV"…
Ya seas de Francia, Australia, Islandia o Italia seguro conoces a Pedro el Mapache. Agitando las manos al sonido de Raffaella Carrà seguro esta melodia ya esta grabada en tu cabeza asi que no te puede faltar entonces este juego meme…
This is the start of my collection of blanks for the Apache series weather proof cases from Harbor Freight. Apache 3800 Lid/Base
175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters
Presentamos un encantador **HueForge** en 3D que captura la esencia traviesa y curiosa de un mapache. 🦝✨ Esta obra en 3D destaca por sus detalles intrincados, desde el suave pelaje hasta los brillantes ojos de este adorable animal. Cada…
Der Tischeinsatz für Sägeblatt der HS115 von Scheppach ist sehr instabil. Ich habe ein stabileres Teil konstruiert und das bestehende dadurch ersetzt. Jetzt ist die Auflage Fäche stabiler und es ist möglich auch schmale Streifen zu Sägen…
Kleine Spachtel zum reinigen ihres Druckbettes oder anderweitiger Verwendung
Update 25Nov22 I've uploaded Version 3 of the zero clearance & 6mm Chamfered Slot inserts, which are stronger again than version 2, with more reinforcing ribs. I now print these in ASA, which seems more resilient than PETG or PLA and I've…
Il supporto per fotocamera Eufy Cam Pan è la soluzione perfetta per ottimizzare la sicurezza della tua casa o dell'ufficio, offrendo un'incredibile flessibilità e praticità. Questo supporto avanzato è progettato specificatamente per…
Apache chief - Walker of the Silent Trails
A dust cover for the Scheppach CS-55 track saw. My guess is that it should also work for the Aldi Workzone and any other track saw that looks similar. Printed at 100% it fits fine, and fairly easy to remove. Printed at 101% (may have to…
A meeple of an Pachycephalosaurus dinosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games
Hello everyone, This is my design for a Pachyrhinosaurus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
A model of the Alien from Overwatch
