101 modeli
Got this idea from the video in the first photo Print at .01 to make sure the cutting edge is sharp. May be best to print on a resin printer.
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Shout out to wolffshaut for the great models! I just had to give it my twist with a foot for vertical printing and a little less angle on the cups. I tried to print this aligned to the x axis first and it came loose twice so I went for 45…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena jednego wariantu
EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
English It's just a small painter's pyramid. The existing templates were either too big for me or too unstable. I've tried to find a good balance. The pyramid is only 25mm high and (in contrast to the templates found) not so sharp at the…
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
I remixed the original to fix a few issues I found when using it with my masking/painters tape. Problems The U shape that slid on from the side This design of the original made the model inherently roll thickness specific so as you used…
This is not just another Painters Pyramide! OK, basically it is. But I made an additional adjustible version to avoid wiggling. I provide a 3mf-file which contains a set of 3 non-adjustable and 1 adjustable Pyramids. All together these…
Pyramid Painters Cone - Stackable - Scalable in size and requirements Painter’s pyramids for creative projects Lift your project off the work surface while coating, gluing, or finishing. The pyramid shape stays stable and touches only a…
Want to use a painters pole to hold up your Starlink Mini? This adapter fits the plate that comes with the unit. A threaded hole is provided that fits the standard painters pole thread. I would print with 4 walls and a decent amount of…
A modified of the Clip Stick to accept basic painters poles or even broom handles. The threaded portion is a little thicker than it needs to be but it helps when wearing gloves. Supports - Yes Print with the threaded part flat for minimal…
I used it to mount this on a expandable broom stick. Printed in PETG with 4 walls and 25% infill to make sure its holds.
Painters Pyramid Support when painting things Category: 3D Printing
I was always annoyed when my painting cones or pyramids moved away on the workbench when oiling or even polishing wooden boards … So I just thought about having a painters cone which uses my workbench dog holes, or which I can also screw…
This allows you to use a painters pole to attach a pool skimmer. Printed in Petg 0.04 Nozzle 20% infill
Pyramide für Oberflächenbehandlung von Holz (zb. ölen, anmalen oder lackieren). Mit Schraublöchern um diese auf dem untergrund festzuschrauben.…
A tape dispenser for painters tape
Painters palette tool, simple. Enjoy!
Clip Stick attachment I made for a telescopic painters pole, diameter approximately 22mm. No moving parts, compliant holding of the gate. Friction fit, no glue needed. Carabiner is held open without the need of tape or elastic band,…
Here's my painters wet pallet, complete with texture pallet this can be printed in one piece without supports, hinge in place Print in 2 parts/clip together version: https://www.thingiverse.com/thing:6922138 Category: Art Tools
Verschiedene Helferlein die das Streichen von Brettern o.ä. erleichtern kann. Möglichst kleine Auflagepunkte verhindern das Festkleben. Mehrer Versionen mit unterschiedlich großen Auflagen. Different tools that can simpfily painting of…
Overview : I have several painter’s poles that adjust to various lengths. I’ve developed a number of attachments for them, but the ACME thread definitions in Fusion 360 are not compatible with the ¾” (075) x 5 tpi definition used for…
Basic pyramids for painting projects. Wanted them to be a reasonable size and barely fit 4 on a mini+ build plate.
Stainers or Painters Pyramid/Caltrop. This little doohickey is optimized to create and open up space while spray staining or painting. I would not step on this shiza. The voronoi version is questionable. I realized it would get full of…
Sure, you could just go out and buy a few hundred of these with the change that you have hiding in your sock drawer, but wheres the fun in doing things the easy way? Parametric design lets you choose the height, thickness of the legs, and…
This model is compatible with the lego system.
Securely elevate your painting project of the work surface. Easy to print. Stable, stackable and easy! Leaves minimal mark when painting both sides of the project. Measuring 60mmx45mm
This model is a strong , simple and stackable painters pyramid. It is used when painting for example a piece of wood. With this little tool you can paint all sides of the wood piece in one step without waiting for the paint to dry,…
This model is inteded to sort beads/buttons/screws/whatever while being able to be gripped like a painters palette. Thus it is harder to slip from your hand while sorting. It can also work as a deep palette with lots of room for paints.…
This is a replacement topper for a painters pole to allow you to screw on accessories. We use a nice painter's pole to hang holiday lights instead of those cheap ones they sell in mass every Christmas. When the top broke right at the…
Painters pyramid, quick print. Prints flat, around 10 minutes, and then folds to a little pyramid. Uses only about 2 grams/60 cm of material. Both PLA and PETG can be used. In the pictures, the blue one is in PLA 0.4 nozzle, the black is…
Update Painter Pyramide V2! I’ve made a few minor updates to my original design. The new version is now interlocking, as shown in the pictures. Additionally, I’ve introduced a second variation with a flat top. The pointy version is ideal…
Painters pole adapter for Starlink Mini. This fits the pole mount shipped with Starlink Mini in July 2025. Material: PETG Supports: No Infill: 20%
I use large rolls of painters tape and wanted some wall mounts for them. Rather than making the usual stick pointing out (not practical with 4" rolls) I decided on a shelf like concept. A new roll slides in slightly snug but is easily…
A paint tray with removable cups for mixing paint. I originally made it for my kids, but it also works for adults :) The cups are easily printed, and a full set is printed in less than one hour. Update 28/01-24: Added a tray and cups with…
A simple wall mounted rack for holding paint dropper bottles. There are 3 different files currently available: Paint Rack - 25mm Bottles x9.stl - Suitable for Vallejo and Army Builder style 25mm bottles. Paint Rack - 28mm Bottles x9.stl -…
Here's my painters wet pallet, complete with texture pallet this can be printed in one without supports and clip together with a little force. Print in place version: https://www.thingiverse.com/thing:6921418 Category: Art Tools
Painters cone (also known as painters pyramid) that can be interlocked to handle long thin stock or used on their own for use with plates. Can be mounted to work surfaces with 3mm flathead screws Storage stands for gridfinity or stand…
A painters pyramide with screw holes. Prints quickly with little filament. Top part is a circle with diameter about 1.5mm. Made like this so it should not damage your work.
This is not an actual remix but a supplement to Muurphs Painters Pyramids . It holds up to 12 pyramids and allows for convenient and compact storage. Additionally the stand helps by keeping the unused pyramids organized in a tidy stack…
Print with Organic support on build plate only. Bottom PrusaSlicer view:
Painters pyramid or string test! Size small and large! Print head should be at 200 Celsius (if printing with Pla) and bed temperature at around 55-60. Enjoy!
My version of a painter's pyramid/cone. It's 50mm wide and tall. Perfect for elevation work pieces to paint or stain.
Just a little paint pallet to keep paints organized and fresh with the lid
Painters point support for objects Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: MatterHackers.com PLA any Notes: Painters point support for objects Category: Tools
Print it laying on the back. I printed using 0,2 layer height with a 0,4mm nozzle in PLA. I used 2 walls and qubic infill with 15%. My wife printed her version with white acrylic color on the front.
Rather than print more of the smaller capacity already designed one I thought it better to remix and reduce plastic use and just make it have a greater capacity not just resize as that would stretch the holes. Uses # 6 screws.
Small 0.75" pyramids for raising painted, stained or coated materials off the ground with minimal contact area. These tiny pyramids are great for standing off your work piece when applying a coating to allow the piece to dry all around…
See the original design for details (and some great organization prints). A basic painter's pyramid that has only small touch points on the bottom as well as the top.
I wasn't at all happy with my last lot of painters pyramids - so I fixed them! As you can see from the photos they actually get used. These are slightly larger, are easier to print, easier to screw, don't stack, because they are so small…
Painters pole thread adapter that goes from 3/4 x 5 ACME to M18x1,5
It has to be printed in vase mode without a bottom to be a painter's pyramid. In Cura: Bottom Layers = 0 Spiralize Outer Contour = On In PrusaSlicer: Layer height = 0.2mm (?) Perimeters = 1 Spiral vase = On Solid layers: bottom = 0…
watch your paint dry *immaculate* on this painters pyramid. It's lightweight and stackable!
Very basic and strong Painters Pyramid Vase Mode, it prints very fast, I printed in PETG vase mode without a bottom, that enables them to fit on top of each other and take up no space whatsoever, Print at least 4 so that you have one in…
I added a bunch of 10mm x 3mm holes in the back of the holder. Depending on how many pyramids you store you might need some. Slicers can now allow you to plug the holes and make new ones to whatever size magnets you have. The back of the…
Easily printable painters palette (no support etc required). Scalable to fit all hands and needs and one version for right hands (for left hand painters). Step files for modification included. The knives on the picture are the really…
Painters Triangle / Pyramid / Tripod with the Hexagon Prusa Style design. It has a 3 mm hole at the top to add a nail if the top is to much for you as it prints. I am ok with it for most applications. Added the step file with parameters…
Remix of the model by fns720 that has a spot to put a sharpie for convenience.
Modified the existing Yeti Wurks pole mount to be able to use on extendable painter poles. Cut down the size just slightly to make it able to print on a Bambu Labs A1 mini. Print in at least PETG for outdoor usage 50% infill should be…
A multi-functional yoke for use while attached to a standard painters pole with a ¾ 5tpi ACME thread. I designed this for my Father who wanted extra stability for his rifle, when standing. I printed it in PETG with no supports, but with 4…
This design was built to use fiberglass fence posts such as electric fence poles. They are around 9.75mm diameter and can be purchased from stores such as Tractor Supply for about $2.50 each. You may need to scale the parts up or down to…
These were prototyped in standard PLA and it seems to be perfectly suited to the task. I used the standard presets for printing, which are nozzle temp of 215, bed temp 60. No need for a brim. They are designed to be attached to a long…
A nice help piece if you want to paint flat pieces so you can paint all around it.
Printed and tested with 0.2 layer height. Fits all dropper shelves and inserts with the -25 modifier in Painters Fortress vol.2. Not tested on vol.1.
Hook tool for use on painters' poles, one use would be for hanging Christmas lights up in trees etc… Prints without supports, works on standard painters pole threading. I did include the gcode file for reference only, use the 3mf file to…
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
A scoop that screws onto the 3/4 acme thread used on painters extension pole. Created to help clean out gutters and roof tiles. 3 different designs. I used them to scrape the moss of my roof tiles which worked extremely well. Oriented to…
Stand for Painters Pyramid Vase Mode, to keep all your vase mode painters pyramids neatly stacked. This should be printed with some infill for strength, these pyramids weigh next to nothing so not necessary for overkill.
Painters tripod or pyramid that has parameters in the Fusion STEP file that you can change and get any size you want. 3 mm hole in stl uploaded.
The file available for download has a 1"x1" face. It can be scaled in the width direction if you need a longer piece for a bigger label. It fits nicely on an extruded aluminum 20mm rail. Printing Notes The .stl will need to be flipped 90…
Overview : I had an old pole where the male threads had snapped off. I cut off the top section of the pole that contained the threads and cap, then modeled replacement ones. The cap slides over the pole’s shaft. The fit should be very…
Tablet holder for the painters easel.
Strong painters triangle in a tri-force inspired style.
Remake - No idea where this came from, unfortunately. Seen here: Good Demo! But it works absolutely awesome, so I had to share. Just scale to size with your slicer for bigger rolls of tape.
In printing the original mine wouldn't stick and just foobared. So I made better feet.
Overview : I designed this general use hook to thread onto any standard pole that uses ACME ¾ x 5 tpi threads such as painter’s poles. I regularly find the need to hang or reach something up high. I’ve included my Fusion 360 file and step…
A completely scalable Painters Pyramid I’ve designed on TinkerCad. As it’s my first time doing something like this, please let me know If and how I can improve. You will need to scale it up as its quite small when you first open it.…
This is my first creation the handle on stand is for turning the model without touching the paint the slot in the middle is for different attachments each have different ways to attach for different hobbies. If you have have concerns or…
I didnt want to spend $40au on a Painters hawk to mix dry wall/gyprock powder and fill a few small holes in my interior walls so i designed this one in Onshape and printed my own. Printed on a smooth plate using PETG so it can be washed…
(DO NOT TRUST! USE AT OWN RISK!) So I have been a bit frustrated that Harbor freight masks are disposable unless you but like the premium one that actually lets you switch between the P95 filter + OV cartridge and the P100 filter.…
Hang plants and other items from the ceiling without the drywall or paint damage of stick-on or toggle style ceiling hangers. This hanger uses up to 4 small painters nails to mount the base, and includes a dome shaped cover panel. The…
Painters Ruler A simple tool for painting sharp lines. Designed for Creality K2 plus with a 330mm wideness.
Painters Pyramid. Low Fillament Version. Fast printing. 0 Support needed. Stackable
Simelar to painters pyramide, if you need to prop up a small lip which would be hard to do with a pyramide.
A handle to hold a 50mm or 2" wide painters tape. (inner diameter ± 75mm or 3 inch). Print the handle lying on the side. Assembly: some force is required to push the ends of the handle together to snap the holder on. If to difficult apply…
There was a contest using pursament spools... well I dont have any of those... but I do have flashforge spools... so in spirit of the contest, here ya go. Hold brushes, mix paints, and keep water for ur brush... enjoy painting with ur…
Measure and mark the inner edge of the top layer to the desired dimensions. Then glue the top to the bottom with the middle slotted in. Some sanding may be required to get tolerances to the desired smoothness, as this is dependent on the…
Overview : My son loves water sports, so he is typically in charge of our in-laws boat when we go to their cabin. He struggled to fish the boat cover straps under the boat while it was on the hoist in the lake, so I made him this…
Convert a painters pole to a bolt with 3/8-24 or other threads
An adaptation of verdi's XIAO nRF52 / SX1262 Case cover, modified to replace the lanyard hole with a threaded connection for attaching it to a painters pole, so that it can be raised higher in the air.
Want to use a painters pole to hold up your Starlink Mini? This adapter fits the plate that comes with the unit. A threaded hole is provided that fits the standard painters pole thread. I would print with 4 walls and a decent amount of…
Remake - No idea where this came from, unfortunately. Seen here: Good Demo! But it works absolutely awesome, so I had to share. Just scale to size with your slicer for bigger rolls of tape.
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
In printing the original mine wouldn't stick and just foobared. So I made better feet.
Painters Ruler A simple tool for painting sharp lines. Designed for Creality K2 plus with a 330mm wideness.
Basic pyramids for painting projects. Wanted them to be a reasonable size and barely fit 4 on a mini+ build plate.
watch your paint dry *immaculate* on this painters pyramid. It's lightweight and stackable!
