Presta Funnel for Tubeless Tire
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 183
- Polubienia
- 24
- Ocena
- 5
127 modeli
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printmaterial: I recomend using PETG Settings: 100% infill 0.10mm layerhight Supports: none Printer: Prusa mini + Printtime: ca. 20-25 min HAPPY PRINTING :-)
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…
PLA / PETG 0,1-0,2
Combination of two models from Thingiverse: Middle Finger Schrader Valve Cap Presta Valve Cap This is the first iteration of this design, made in a few hours pretty roughly. Threads came out pretty nice with no supports inside the valve…
I have modeled this usefull bike tool. But I have modified original design to be able to use both "holes" to screw/unscrew presta valve core (see attached photos). I have tested and fits perfect, no loose. Enjoy Print instructions…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
This small grommet allows you to use a presta valve in a Schrader valve hole without cutting or herniating the stem. I use Schrader-ready rims on all our touring bicycles because in the middle of nowhere, you never know what kind of tube…
A Presta cap for your bicycle valve in the shape of Bender's head from Futurama made for a friend - TUG
My bike trailer has these *** Dunlop valves that are the worst. This adapter stays fixed to the valve(s) and makes pumping air into the tyres much easier. Printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, only perimeters, arachne
Replacement cap for Presta/Racer bicycle valve. Precision of the threads may depend on the printer and printer settings. The threads are, on purpose, a bit loose. I have successfully printed this with a 0.4 mm nozzle and 0.2 mm layer…
A small funnel for tire sealant especially for Presta valves (with thread)
It's a cool presta valve cap, so I don't have to buy it when I loose mine =D It's also bigger, so you can print the color you want and will be very cool =] print in 0.1 height for better results (avoid thread issues)
A fancy Presta valve cap for your bicycle, which shows your initials. Pimp your own ride or gift it to a friend. There are >600 STLs included with all possible 2-letter combinations so you can pick the one you need directly. In case you…
This Merida branded valve cap goes over the entire presta valve stem, giving your bike a clean look. The threads are modelled as M6 with a 0.8 mm pitch, but still I had to scale the valve cap with 98% in my slicer. Thus, you might need to…
To fill inner tube you must remove valve core.
not tested I would be very happy about a Make, Like or Share! Happy printing!
Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta
Just a remix of a hexagon presta valve cap and a money statue, fits perfectly and snug, doesn't move around. pretty strong threads
A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…
Disclaimer I unfortunately don't have access to other types of valves as of right now. I will be looking into adding more in the future. Tested Print Settings Material: PLA+ Supports: None
Simple adapter for Presta style values to be used with Schrader pumps/air compressors. Added a clip to attach to my pump/compressor hose so I don't lose my adapter (again)!
I'm always on the lookout for some new useful thing to print, and just yesterday I happened to notice the little black tool in this Instagram post from Stan's NoTubes . Clever little tool to help remove a Presta valve nut from a tubeless…
Simple screw-on cap for Presta/Sclaverand/French type valves. If you like this design, please consider leaving a ♥heart. Thanks! ---------- Update: Added a version with 0.2 mm clearance. If you are unsure, print this one. ----------…
This is a Presta valve cap with proper #10 24tpi threading to fit the valve better than other models out there. it included a filleted square hole for removing the valve core on Presta valves. I find Presta valve tools to be small, and…
Tiny tool to open a stuck Presta valve nut (not to remove the valve). These are quick to print and are small enough to throw a couple into a bicycle toolkit in case of emergency. Works best with PETG on 0.15mm.
I wanted to print some Presta valve caps. Unfortunately a lot of the existing models I could find needed weird scaling for the threads to work. I modelled these with the proper #12, 24 tpi found on the Presta valve core. I made a few…
It's a presta valve cap, that's a banana! Print any ol' way you please.
I accidentally ordered Schrader rims, but didn’t have Schrader tubeless valves kicking around. I have some excellent 76 Projects Hi Flow tubeless valves, and the top of these valves is big enough to seal against the Schrader-sized 8mm…
This is a valve cap in the shape of a cat head that fits Presta Valves. No supports needed I printed in PLA on my Ender 3 using a .4mm nozzle I recomend using variable layer height around .08 - .1mm layer height, thinner layers where the…
in my mini world my bike is the astronaut's spaceship
A nut to secure a Presta valve stem firmly against the rim. Category: Vehicles
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I recommend using a brim. It's only a ten minute print. No…
Print neck down, I didn't use any supports and it came out great.
italian hand gesture emoji presta valve cap
The title basically. Prints without supports, I recommend a higher resolution (0.12mm) for better threads. 3 variants: Short valve cap Long valve cap Long valve cap with threads deeper in the cap
Clean build plate and brim are advised! Also print multiple at once so each layer of each piece has time to solidify before the next one is set on top. Additionally, the color can be swapped at 6.6mm to make the 1x1 brick more…
This is a small part that sits between your bicycle rim and the valve stem ring. The main goals of this part are to prevent the valve stem ring from scratching the rim, and prevent the valve stem ring from vibrating and making noise.…
Based on the Wheels Manufacturing PSS-1 , whose measurements are posted as follows: Length: 11.4mm Outer Diameter: 8.2mm / 9.3mm Inner Diameter: 6.15mm I guessed the flange to be 2 mm tall. First print came out too small on the ID & the…
Presta valve caps lives in the toughest condition, high speed, jumps, whips, mud and rocks. With all those elements, thes guys can get scared and terrified. I rode those for the entire season now and they are still holding strong (cause…
Presta valve tool for remove and install the valve body.
Big Chungus presta cap I made as a joke for a friend to test my 0.2mm nozzle
Not quite a remix of the Valve stabiliser for carbon road bike wheels as I modeled it from scratch, but definitely an inspiration, so wanted to give the credit. Sometimes a Presta nut doesn't sit quite right on a rim profile, generally…
Cura slicer. Printing temperature 215 degrees Celsius. Print speed 30mm/s. Z seam alignment - Random, to avoid seam. Material PETG. Support is not required. Only brim.
A small curved washer for use with generic "aero" rims. Helps more with tubeless systems where air leakage around the valve needs to be mitigated. I modeled this off of one that came with a Diamondback Airen 1, 2018 model. Printed in PETG…
Quick release deflater for Presta valves which are commonly found on bicycle wheels. Unscrew the Presta valve locknut and push this piece on, it will hold itself in place while it holds the valve open, allowing the tire to deflate while…
not tested yet I would be very happy about a Make, Like or Share! Happy printing!
I designed it with this shape in order to screw and unscrew easily, faster and thigter than the standard shape you usually find for this tool. N.B: not all the presta valve has a removable core Print it with a strong infill and I suggest…
Tool for presta valve core replacement
Print in vase mode (Spiralize Outer Contour in Cura) with no bottom layers with 0.65mm line width (no need for 0.6mm nozzle, 0.4mm nozzle can print up to 0.8mm lines without any issues).
I had found a nice tyre sealant applicator but it was missing the feature to place the sealant in side the tyre with out placing a lot around the treats of the valve. so I made one. there is 1 edition with a cap for storage and…
This is the Tire Lever to rule them all. With its compact design it's easy to carry with you. The tool features a spoke lock to allow for hands-free usage with multiple levers and a cutout that fits around a presta valve core to quickly…
Made to replace the adapter that came with my bike pump. Needs an O-Ring of ID between 4-6 mm. To use it: Open the nub on the presta valve, screw on the adapter, attach air pump with schrader connector to adapter. The O-ring should…
I tried downloading some models but they wouldn't fit well (usually too wide). This one has a bit longer body than the plastic ones typically found around - for easier manipulation but at the same time not too long to prevent interfering…
A small curved washer for use with generic "aero" rims. Helps more with tubeless systems where air leakage around the valve needs to be mitigated. I modeled this off of one that came with a Diamondback Airen 1, 2018 model. Printed in PETG…
A keychain that connects to a Schrader (German) to Presta (French) air valve adapter (the adapter screws into the keychain). Allows carrying an adapter on a keychain for bicycle air filling "in the wild", in gas stations etc. for bicycles…
this will fit on presta valves that have a threaded shaft it doesn't twist on to the upper most part pf s presta valve.
This is a series of designs with different textured grips for the Presta (aka French) valve dust cap found on road bicycles. The OpenSCAD source code is included but requires the BOSL2 library for the threading and textures. The cap…
Valve Cap for French or Presta Valve for the Bike. No thread inside because thread is not needed - it will self cut the thread when you tighten it on the valve. Category: Sport & Outdoors
Slight remix of an adapter by fpetrac. I printed his version and had air leak out around the threads on the outside. I just smoothed that area out and now it makes a better connection at the ball tire chuck on my air hose. Category: Other
Presta valve wrench for removal and installation of Presta valve core/stem. Compact, for storing in your bike kit. Dimensions: 35 mm L x 9.5 mm Dia. I print with >50% infill and 4 wall loops for strength. If it works for you, please Like…
Presta valve washer / spacer. Works well with tubeless valves. Designed for rims with 27mm outer width. Possibly fits other rim widths. You can change it by editing the attached FreeCAD project file. Print Settings Printer: Voron 0.1…
Presta Skull Valve Cap Category: Other
The tool works great in silk PLA and PETG-CF so far. It's a quick print, coming in under 3g of filament. I printed both materials at 0.20mm layers and arachne wall gen on. The silk was printed with “strong” 6-wall defaults, and the…
As seen on Instagram - hold two tubeless valve bodies or valve extenders together so they don't get separated in storage. Three versions for various printers: Prusa MK3S sliced at 0.300mm layer height with PrusaSlicer - 1.13mm wall…
Print with the smallest layer height possible for the best result
Based on the Wheels Manufacturing PSS-1 , whose measurements are posted as follows: Length: 11.4mm Outer Diameter: 8.2mm / 9.3mm Inner Diameter: 6.15mm I guessed the flange to be 2 mm tall. First print came out too small on the ID & the…
I printed the model on its side in 0.12mm layer PETG.
Chicken Valve Cap Presta V2 Category: Other
Presta valve cap with dinosaur figure on top. The model is threaded although you can additionally cut threads with 5v2 tap if you have one, To print is successfully it needs support under chin. Printed in pla and petg.
Frog Valve Cap Presta Category: Other
My hand pump was older than the new model where Decathlon has introduced this adapter. I didn't want to throw away my pump, nor to buy the repair kit, because in the kit there are also other pieces I didn't need. So I just reproduced it.…
Pinecones Valve Cap Presta V2 Category: Other
The cap of the base model was slightly too small to fit the air valve on my bike so I made this remix. I used the occasion to thicken the wall and to make it printable without supports. I originally intended to just do a small extrusion…
Alien Valve Cap Presta Category: Other
2-in-1 Presta Valve Cap & Shimano 12s Derailleur Cage Lock This compact tool works both as a standard Presta valve cap and a cage lock for Shimano 12-speed derailleurs. Simply remove the cap, slot it into the derailleur lock pin, and…
I printed with the finest setting on my printer (0.08mm) with a 0.4mm nozzle using PETG. Friction fit a 6x6mm cylindrical magnet into the 6mm hole. Use 5minute epoxy to glue to your ratchet. Magnets I used:…
Stop dirt and debris filling your Presta valve — this ultra-light TPU aero cap is designed for road, mountain & gravel bikes. Lightweight and aerodynamic valve cover for bicycles, designed to protect your entire Presta valve from dirt and…
Holds 10x 6mm bits (most are actually 6.3mm), a presta to schrader valve adapter and a missing link. Model includes a 0.3mm “shrink factor” for printing in hard TPU, but this can be adjusted in the in included F3D file. Included 2…
Ever headed out for a ride only to discover low air in a tire thanks to a slow leak? Loose Presta valve cores are often the culprit - fortunately, this valve core tool cap provides an easy fix. Each cap features an integrated tool that…
I printed PETG at 0.12mm layers and it fit perfectly.
Heart Valve Cap for Presta Valve Category: Other
This is a simple mount that snaps on to a 22 mm diameter bicycle handlebar and holds a presta-to-schrader valve adapter. Never be without your adapter! Schrader end of adapter screws into the hole in the top of the mount (may require…
Needed something that was super stealth for a build
My print was at 0.12mm layers in Sunlu PETG.
I remixed this nice gnome model to be used on a standard presta valve.
Remove the piston from any cartridge with an outlet threaded as G ¼. All you need is a Presta valve. Easily obtained from a cycling friend or a local bicycle repair shop. Using a rod to remove the rubber piston from empty Eazao clay…
Print this out of TPU for a push-on pull-off tire deflator. The horizontal hole allows it to be put on a key ring for convenience. I'm using the tpu95-hf from Polymaker with a 0.6mm nozzle. The larger nozzle reduces back pressure and…
Printed from TPU 95, fits tightly on the Presta and is perfect for pumps with any type of nozzle.
Since I usually forgot the adapter, I printed a keychain so I could always have it with me. In order to fix the entire stable on the printing oil bed, it is recommended to print with a border. one is printed with fuzzy skin the other is…
Since I've given up go-fast cycling for touring/camping, my riding groups often have a mix of Presta and Schrader tire valves. More than once we did not have the correct valve fitting for a particular situation. Here is a simple keychain…
Dog Valve Cap Presta Category: Other
You should print it on quality from 0.08mm to 0.16 layer hight (you can also print on 0.2mm if you want). if you are printing it with 0.4mm nozzle let it be as it is, but if you chose smaller one for example 0.2mm nozzle you should set…
designed to be printed upside down on table without support
I prefer to add slime to all my bicycle tubes. Combined with tire liners, it's a great way to minimize flats. Slime tubes are sized for Schrader valves, so using with Presta style is messy. This adaptor provides a good seal with the tube…
When using a single wall fatbike rim and a tubeless valve with a conical gasket, the gasket will sometimes stick through the rim causing the Presta nut to bottom out against it before a good seal is formed against the rim. (Details of…