61 modeli
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
In 3d printing a RC Stearman model I needed an 11x5.5 prop. Instead of paying $3 for one I spent thousands of person-hours using high-expertise design skills to build this! It's a procedurally generated propeller design that's…
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.
update - print this with PETG or ABS (I tried with PLA but the propellers melted). -0.05mm layer height -brim for 2 blades and raft for 3 blades -you can try another filament or settings. good luck.
so... more = better Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older d
so... more = better \_(ツ)_/ Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…
2, 3 and 6 bladed propellers that are made to be used for Lego creations
These props are for a DJI mini pro 3. These are version 50 of the prop, so I have been designing and iterating for over a year on these. These shouldn't cause any "ice" warnings that there is too much torque, and they shouldn't over heat…
Triple-Blade Propeller – Precision-Tuned Variants This design is a carefully refined version of the classic 10x5 two-blade propeller, upgraded to a triple-blade configuration for improved thrust balance and smoother operation. The…
This is easy to print and can be easily modified to work with other drones.
Proppeler box for DJI FPV drone Thin and Sturdy Enjoy edit: I have been asked to scale down the box to 70%... added files scaled at 70% as the original model was not designed to be scalled down. Scaled version will acommodate GEPRC smart…
IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…
Fixed 5mm height instead of 6mm and T-mount for bi-blade. Originals by STRIKING FPV
11 Different Propeller designs! I had way too much fun designing and trying different things to launch from the propeller launcher. I spent lots of time modeling and testing these out. I wanted to share so everyone can have as much fun as…
Folding propellers for rocket drones What's a Rocket Drone you ask? Think of a Rocket Glider but instead of wings it has drone pods and can recover like a drone. One of the first successful ones I've seen is a Mars Lander being developed…
Customized version of https://www.thingiverse.com/thing:1621351 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1621351 Instructions Using the following options: bladeType = helicopter bladeOD = 100…
⚓ Pair of 4-bladed propellers (Right & Left) – perfect for both static display and dynamic naval models 🚤. Designed to add realism and functionality to your builds, whether you’re completing a scale replica or upgrading your RC boat. 📏…
Landing Gear for Dji Mavic Mini, which clips under the drone. Fit with the dji case; no need to uninstall it before park
A user wanted me to make this prop guard, but he has not yet reported if its fits, maybe someone can try it and tell me if its fits
A right and left handed propeller that fits on brushless motors.
This is a nose cone i draw to change the one on an motorised rc soaring plane which broke. Need a 2mm screw. Quite happy with the result as weight is not bad and the balance is good. Print Settings Printer: HK fabrikator Rafts: No…
This is a simple Box to store 4 spare propellers of your DJI Avata. Created with Plasticity. Category: Hobby
I gutted this $45 Amazon drone https://amzn.to/3R1EyMj to create this unique toroidal drone! The toroidal propellers make it much quieter and losing the frame cuts the weight by about 33%. I included the .f3d file so the props or frame…
Overview This is an addition to this model: https://www.printables.com/model/412370-new-and-improved-pull-or-drill-powered-propeller-l These propellers work with the original remixed model and offer superior lift and a slower fall. The…
These adapter allow mounting the 5-7" Dalprop folding propellers to T-Mount motors. They also allow converting these propellers from a 3-blade version to a lighter 2-blade version. There is a video about them here:…
FPV dron 5" propellers box (for 4 props) ver1, ver2. One box with chamfer and second without chamfer. Printed in PLA. Ver. 1 tested on: -Gemfan Hurricane MCK 51466 V2 -IFlight Nazgul F5 -T-Motor T-5143S Ver. 2 tested on: -T-Motor T-5146…
FPV drone propellers key M5. Printed in PLA.
This is a model of the KingKong ET100 propeller. I ran out of props during quarantine and shipment is on its way for 2 months already so I decided to attempt to design and print some myself. I only uploaded one side of the props so if you…
Ich hatte keine Lust 10 Euro für Ersatzteile zu zahlen und hab nirgend wo eine stl Datei von den gefunden also hab ich die halt selber nachgemacht. Ist aber noch nicht perfekt!
THESE HAVE NOT BEEN FLOWN YET. PROTOTYPE DESIGN NEEDING REFINEMENT! AND ALMOST FOOLISH TO TRY BUT THAT'S NOT STOPPING ME. PROCEED ACCORDINGLY. ON THE MODEL THESE WERE DESIGNED FOR, THE ENGINES ARE COUNTERROTATING. THE LEFT MOTOR SPINS…
Upgrade and restore your Huntex Dino and Shark Disc Launcher Toys with these custom-designed replacement propellers. Created to be fully compatible with both the Dino and Shark iterations, these 3D printable propellers are an ideal…
printed with ASA and 0.08 layer height
A replace of propeller protection for Potensic T25 drone. this version has interchangeable pegs. if desired, instead of the pegs you can use metal rivets with a diameter of 2.4 mm for a length of 6 mm. Print with 100% infill at 0.15…
This is a replacement propeller for the Super Wing Donnie. The original is made of fabric.
Scale Propellermutter für die Hobby King Avios HU-16. Ich habe 2 Versionen erstellt. Version: Propellermutter mit M4 Messinggewinde. Entweder man verwendet das Gewinde aus der originalen Mutter oder diese -…
PropBench V2 – 3D Printed FPV Prop Test Bench PropBench V2 is a compact 3D-printable test stand for benchmarking tiny FPV propellers with repeatable, automated test routines. It was built to solve a simple problem: hand-testing props is…
FPV dron 2.5" propellers box (for 4 props). One box with chamfer and second without chamfer. Printed in PLA. Tested on: -HQProp TR2.5x2.5x3 -Iflight Defender 25 2525-3
A replace of propeller protection for Potensic T25 drone. Print with 100% infill at 0.15 resolution.
Scale Propellerschraube für die Avios Grumman HU 16. Ich habe 2 Versionen entworfen. Version: Man benutzt den Messing Gewinde Inlay aus der originalen Propellerschraube (Herausbrechen) oder diese…
Just prop guard for tiny qx80. Print Settings Printer: GATE 3Novatica Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: PLA Printed... Category: R/C Vehicles
made to hang a real airplane propeller on your wall
the center where the hole is is 5 or 6 millimeters. środek, w którym znajduje się otwór, ma 5 lub 6 milimetrów.
Tired of having your propellers fly around in your bag and then when you break one, you just can't find one with the right direction? This convenient propeller carrying case solves that issue! It is designed specifically for Racerstar…
behind now mission this way
Protector and bumper for foldable propellers. Built for this hub : Folding Alloy Prop Spinner Hub 44mm W/3.17mm, 4mm & 5mm Adapters Print two and use like in the picture for best results :-) Print Settings Printer Brand: RepRap Printer:…
When our team was working to design this car, we wanted something, eye-catching, something that would stick in people's heads for days until they finally got it. We hired several hundred people to take surveys about what they wanted in a…
Use 2x M3 x 30mm SHCS and M3 nuts Hole spacing is 21.5mm, this worked for my prop spinner but may need to be adjusted for others. Fusion file is included for easy remixing.
Use supports and infill I used https://www.printables.com/model/1648762-dummy-prusament-spool-for-maker for propeller
Designed this stand to showcase propellers from my aerospace engineering final year project, and it worked great at my presentation — sturdy enough to sit on a table all day without tipping, and it makes the propeller the focal point…
FPV dron 5" propellers box (for 4 props) ver1, ver2. One box with chamfer and second without chamfer. Printed in PLA. Ver. 1 tested on: -Gemfan Hurricane MCK 51466 V2 -IFlight Nazgul F5 -T-Motor T-5143S Ver. 2 tested on: -T-Motor T-5146…
Use 2x M3 x 30mm SHCS and M3 nuts Hole spacing is 21.5mm, this worked for my prop spinner but may need to be adjusted for others. Fusion file is included for easy remixing.
THESE HAVE NOT BEEN FLOWN YET. PROTOTYPE DESIGN NEEDING REFINEMENT! AND ALMOST FOOLISH TO TRY BUT THAT'S NOT STOPPING ME. PROCEED ACCORDINGLY. ON THE MODEL THESE WERE DESIGNED FOR, THE ENGINES ARE COUNTERROTATING. THE LEFT MOTOR SPINS…
PropBench V2 – 3D Printed FPV Prop Test Bench PropBench V2 is a compact 3D-printable test stand for benchmarking tiny FPV propellers with repeatable, automated test routines. It was built to solve a simple problem: hand-testing props is…
Hey everyone! After my Electric Turbo Fan Model blew up in popularity, I’ve decided to take things to the next level with a brand new project: a Turboprop with Variable Pitch Propellers. Enjoy! Everything you need to know is in the Free…
