Prusa MK3 / MK4 X-motor cable protection
Clamp X motor cable sleeve (with zip tie) to this and protect cable against mechanical constraints. Points cable down and slightly back.
- Pobrania
- 7379
- Polubienia
- 1552
- Ocena
- 4,96
2026 modeli
Clamp X motor cable sleeve (with zip tie) to this and protect cable against mechanical constraints. Points cable down and slightly back.
Źródło oznaczyło ten model jako treść 18+.
UPDATE 12.12.2023 New Version 3.0 replaces all the other variants. The new version supports all types of Steam deck cases ( with tab, no tab, wider, smaller, etc) and can be individually adjusted to the the right size no matter the…
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…
Protect your wipers in the winter for a minimal cost! Even 1 clip will move your wiper away if placed in the center → use more clips for longer wipers Wiper edge does rest in the empty space, so the rubber is not deformed Bottom is…
Please refer to the video for instructions : https://youtu.be/yzxPOTRFquc AA Battery Sheets (12x12mm 01) https://s.click.aliexpress.com/e/_DlyBLLt Shrink Tube https://s.click.aliexpress.com/e/_Ddri5N3
I Use the Logitech Pro X TKL Red keycap by @TheMilkman Link: https://www.printables.com/model/1013639-caution-keycap -Clip the parts togehter and glue it on your keyboard -You can glue it on the back of your keyboard or clip it in -Don't…
Creality K1 evacuation fan protection in case parts start flying in the chamber. Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any Installation: Remove the screws that hold the fan in place…
New and improved versions added Full versions are fixed! On the full versions, the ‘61’ goes to the front. On the quarters, any will fit on any corner.
remake I made of a model and made it easier to print and also made it so that it could be enclosed.
This end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. Faced down. No supports. Here’s the Festool saw track bumper:…
This is a cable protection for X motor on Prusa I3 MK4/MK4S. The electrical wires are kept in good position. Print Settings 1 x PrusaMK4_X_CableProtection : Layer:0.20mm Raft:no Support:no Infill:25% 1 x PrusaMK4_X_CableProtectionCover :…
Creality K1 side fan protection in case parts fall from bed. Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any (you can also use PLA if your chamber does not exceed 40 degrees Celsius)…
A standard 140mm fan protection grill I designed to place over fans fixed with rubber screws. Print instructions The rubber screws could be a little too tight for you (depending on the precision of your printer). You can drill the holes…
This end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports. Update 20230623: Small modification on the splinter guard side (removed…
Support me & Join Printables Club The best protection for the cables laying on the floor.
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Iso 7010 - Fire protection Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have breaks at the appropriate…
Protective screen cover - Bambu Lab X1 logo version IMPORTANT to switch to no brim TPU no support
I remixed this Anycubic Kobra S1 PTFE Guide using Tinkercad. I removed the top side of the PTFE Guide, so I could install it, without having to remove the Bowden Tube that leads to the extruder, which is almost impossible for me to…
If you want to preserve the thread of your sticks : print this model !
A small addition to keep the x-axis motor cable from bending sharply. Print instructions Print as it is. No supports needed.
I noticed that the hotend fan creates a draft in the area of the nozzle when operating. With some technical materials, you really don't want a draft on the printed Model. This cover prevents the draft. At the same time, the guard protects…
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Hey sneaker fan! Wanna protect your sneaker from creases or keep it brand new? This is the ideal moment for you to download this part and safeguard your baby (sneaker). I designed this model to protect my sneakers from creases. I tested…
Volume knob protection for Quansheng radio UV-K5 & UV-K6 Print Settings Resolution: 0,1 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer: 4 Infill: 15% - Honeycomb Supports: No Rafts: No Filament: Any
Companion project to my other parametric configurable FPV designs: O3 Pod O3 Frame Action2 , 3+4 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! Alternatively use telegram or printables-dm. New: O3…
Protects your drink from pesky flies. Slightly different sizes for soda, Bud, and Coors. Print instructions Unassociated tags: can lid Category: Household Summary Protects your drink from pesky flies. Slightly different sizes for soda,…
This is a quick and dirty remix of argoroots smart "MK3 X-motor cable protection" print for the Prusa MINI Z-motor. Not a neccessary upgrade but I wanted a consistend style and I didn't like the Z-motor cables beeing in a sharp bend at…
If the X-axis cable should break it will do so in a place where you can't solder a new wire to the broken one. It will be almost inside the stepper. With this very simple solution, the cable (if it should break) will do so outside of the…
The budget Parkside Team 20V batteries contain very good battery cells, so I decided to use them for some mobile applications (soldering iron, power supply, etc.) and designed this adapter to connect. Only drawback I can see: the cells do…
Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp
Cover to protect electronics from dust and wet. I can make designs for other models too. As i can see in this model difference only in arms length (5-10in) 🚨 Looking for a stronger version or have wider frame arms? Check out my updated…
Modified commercial child lock. With sophisticated locking system, which is harder to open for children. There are 2 versions of lock: Print only with mounting with glue or double tape (weaker one) Stronger version with need of M3 screws.…
This is a remix of this case but with working buttons and also modified to support case for camera. I did not glue “iPhone 14 Pro Max - Cam Case v2.stl” to the case and it works just fine. Little circle at the top aligns to the top of the…
Protection des Quais avec bancs et Panneau de nom de Gare
Keeps annoying wasps and flies away
Creality K1 evacuation fan protection in case parts start flying in the chamber. 2 Different grid versions Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any (you can also use PLA if your…
Creality K1 side fan protection in case parts fall from bed. Thinner honeycomb design, cool and saves material and prints faster Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any 保護側面風扇…
X1 PTFE Tube protection V2 (low) print head :)
I liked idea of simple clip to make a mask. I dont have access to sewing machine, so I wanted to use a 3D printer. And I have ended up with Fusion 360 to model this simple clip. Its easy to print from PETG, and with 0,3 draft its also…
Do you have the problem of dusty connection when charging you smartphone? Here´s a blind plug. I assume no liability for defective connectors. Please use it on your own risk. I printed it with pla and it fitted quite good. Maybe printed…
The ergonomic thumb recess provides much better control , helps keep your fingers away from the nasty, sticky stuff in the tray. Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray in horizonal…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! New: O4 Pro support! All O4 versions are made…
A slim and discreet case for the on the go opportunities. Fits in your pockets nicely. Snaps shut. If you want to make it a bit more secure pressfit some magnets into it. (5mm diameter, 1.5mm thickness). You will need one “A” part, one…
Grass Protection Ring for Rotary Sprinkler Head Prevents Grass from growing over your sprinkler head by doubling the ring around it. Features Promotes smooth operation of your rotary head. Extends down to the earth to prevent lifting…
1 & 2 Nikon EN-EL15 Battery Protection Case
This is a cable guide for X motor on Prusa I3 MK3S. The electrical wires are kept in good position. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 100% Filament: Fiberlogy HDPLA…
support allégé pour impression rapide impression en 0.3 à 70mms contour x3 pas besoin de remplissage édit: ajout de la version de tibus avec bras écartés pour impression en grande série edit2: legere modif du clip pour mise en place et…
HERE IT IS ! THE MODEL WHICH WE ALL WAITED FOR ! THE: GROIN PROTECTOR / PROTECTION ; TIEFSCHUTZ ---------------------------------------------------------------------------------------------------------------- After a bit of search, i…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Safe your car wipers to be frozen to the wind screen with this easy tool! Designed to be easily installed and removed. Just place this tool below…
This is a minimalistic iPhone 11 case that is made of three parts, the back plate, the outer shell, and optionally the design. The back plate is made to be printed in PLA, PETG, or probably ABS (haven't tried it). The outer shell is to be…
A little guardian angel that protects everyone who walks through this door, and not just at Christmas.
When you want to replace your tyre on, for instance, your motor Cycle you want to protect your rim. Rim Shiels or Protectors are the things to use! Print with heavy fill in! (like 80%) Print on the side! (The stl should be in the right…
Removes strain from the x-axis motor connector. As the z-axis does not make fast moves, there is very little strain in the x-axis wire. However, the standard setup bends about the stepper motor connector. This strain relief moves the bend…
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…
Cartographer V4 Shield here Cartographer V3 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the probe can work without the…
Minimal transport and protection case for the DJI NEO Drone: https://amzn.to/4eot6Td New V2: Thicked Top added hinges added charging opening with cover For v2 the cover should be printed with TPU or FLEX Material A M3 screw and some 1 mm…
Lightweight protection for DJI NEO. Only 6 grams of frame protection and 1.5 grams of camera protection. Remote controller stick protection is also added.
Prusa's X axis motor cable can bend and expose the wires after some time. Use this cable support and zip ties to help hold the wires more securely. Use 2 zip tie to hold the cable. Post your makes and please like for Prusameters. You can…
Print the parts flat, without support. I printed theml with PET plastic bottle filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament But should work with PETG but PET is stronger. When printed bend…
Simple wall-mountable holder for Headphones or Ear-Protection. It's big enough to hold even bigger devices and still have clearance to the wall. Its easily printable without any supports.
Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…
You can download two versions. 25mm is for ordinary head phones 50mm is for hearing protection. Easy to print. 20% infill. 0.2 layer height I recommend setting your "vertical shell" to 5. Print Settings Printer Brand: Prusa Printer: I3…
Mammotion Luba 2 reinforced side protection
made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.
Protection For Radiomaster BOXER Controller Gimbals
This model is compatible with the lego system.
Simple HDD case for storage/traveling, with a tongue to keep the HDD in place. Print both parts and glue them together
This model is compatible with the lego system.
I recommend PETG with 0,2mm layer. No supports needed.
Creality k1. Un couvercle qui sert de protection et qui permet de diminuer le bruit du ventilateur latéral (environ 4db à 1,5 mètres, c'est peu, mais mieux que rien). Creality k1. A cover which serves as protection and which reduces the…
Flexible and durable. The method of folding the mask causes a perfect fit to the face and nose. Simple disinfection. Folded and unfolded in seconds. As a filter you can use any piece of fabric, paper as well as a scarf or handkerchief.…
This model is compatible with the lego system.
To protect from damages due to dangerous corner Use a simple integrated spring to avoid to use tape. Each files include 4 parts Now available on 2 common sizes 16mm and 19mm can fit also smaller due to spring retention. Keep the part…
This is a little sleeve that fits JST-XH connectors typically found on balance port of LiPo battery used in RC models. My fingers are too big to grip on the little flange and the cables are extra thin. I wasn't too confident handling…
Childproof your home! Keep your family safe from sharp corners with these easy-to-install corner guards. Simply peel and stick to any exposed corner, and they'll provide a cushioned barrier that helps to protect little ones from…
NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
A 2mm thick cover for the Digitakt (it probably fits the Digitone as well). It can be kept in place with a strap. I personaly use it with a amazonbasics gopro bag (L) :…
I manually measured the arm of the new GepRC Mark5 frame (different from Mark4) and created an arm protection for it. Printed using TPU, no supports, 0.1mm layer height. Fits on pretty snug. Feel free to edit the CAD file, SolidWorks 2020…
Protects rear wheel bearings and seal rings from mud. Also protects from pressure washers.
A quick design for a lens cover for the new Dji Integra Goggles as I could not find any. V2 is a bit wider which allows to have wide open lenses as v1 was a bit short Print in TPU. Category: R/C Vehicles
Heyho My girlfriend wanted me to print a school cone. I really like the version created by loannis_Bo, but i had annother design in mind that is made out of 2 parts. 1) A part that is protecting the tip of the school cone while the kid is…
I just printed them with the big flat areas on the bottom, no supports on the K1, so it you have some excellent bridge settings then you should be able to print without supports as well. The plugs just press fit into the holes around the…
This slides onto your X Axis motor so you can secure the motor cable to it securly with a zip tie. I've used this on my MK3S+ printers with great success and modified the file to fit my MK4. It also looks cool if you match it to your…
protection du cable usb cible électronique granboard 3s
EU plug protection to avoid bending the pins : clamping on the metal ends easy to print no support, brim recommended
The original model suggests printing it in TPU. However, if you want to print it in PLA or PTEG, you should visit the original model where you can find a slightly different version that works better with those materials. For the V3…
buymeacoffee.com/dgfpv this is the version 2 of my walksnail vtx protection mount. i have changed the overall design, added 0.4mm walls to make them slightly stiffer, also added 20x20 mounting holes for the walksnail vtx v2
Every design requires time and expertise. My print settings: Printing method: FDM (Fused Deposition Modeling) Material: PETG Layer height: 0.2 mm Nozzle: 0.4 mm Orientation: logo on the print bed Infill: 50% Wall thickness: 1.2 mm (3…
I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…
A case for four 18650 lithium cells Version 2 now available: https://www.printables.com/de/model/365535-4x-18650-v2-protection-case-2023
A kit I created for my friends rc car. It should protect the car's body on a rollover - the way he drives, there are many rollovers believe me. :D Important is, this kit will not fit on the original X-Maxx body, it's designed to fit on…
I made this lens protection to avoid to damage the lens of the DJI Goggles 3.
This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…
Whenever I'm taking my e-bike on a road trip with my car's bike rack, I always take out the battery. You know, rain and splashing water can sneak into those sensitive electrical connections and ruin the whole system. But hey, the solution…
I saw that the cable for the print bed always run between the frame and the cross brace. Sooner or later the protective cover and the cable are defect or block the print bed when moving. An energy chain is too long at the back for me, I…