1669 modeli
I'm a big fan of the “dumpster fire” theme. So being able to have a functioning dumpster on my desk is fun. On my work desk, I find it handy to stash thumb drives, yubikeys, lip balm, pencils, etc. Right next to my printer, I find it…
Wydruk około 4,32 €–5,27 € nettoWstępna wycena jednego wariantu
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Struggeling with chopstick? Put the chopsticks in de holder en go! nice and easy
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
NOTE: you will need some hardware to fully use this print I take my chapstick and my keys everywhere with me. If I forget my chapstick but remember my keys, I have a bummer of a day. If I forget my keys but remember my chapstick, my day…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a Chapstick holder to place my tube onto my locker at work, so I don't waste time digging through my locker to find the right pants pocket with my Chapstick in it. I did not like the designs on thing verse, as many of them…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps! The model is quite basic, just a hollowed cylinder with some fillets. This lip…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
An organizer for chapstick, lipstick, or similar items. Pictures are in rose gold, of course!
Wydruk około 2,75 €–3,37 € nettoWstępna wycena jednego wariantu
Dumpster body prints withut support , for best result with the lid print upright on side with supports (see picture) . Attach lid to dumpster with wire or screw into the 2mm hinge holes. Upload your makes, i would love to see them.
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
You've got to fuel for those gains, so chop away at some tasty food. Print these tiny dumbbells to rest your chopsticks in style.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
I found some chopsticks with fingers built-in on this website. This was one of my first prints. My printer was extruding plastic into thin air?! Not sure what was wrong until I realized this needed support. Took me 2 days to build simple…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Inspired by Pavel Rampas 's elegant Battery Holder Vase Mode , I designed a Lip Balm Holder for Chapstick or Burt's Bees brands to be printed in spiral vase mode. For Chapstick, please use Chapstick Lip Balm Holder STL due to its smaller…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
NEW UPDATE - The assembly issue has now been resolved! You can now use the “Spill_Unbeveled_Fix” file to assemble the spill to the cone and scoop! If you prefer, you can also use the gcode file provided. Again, apologies for any…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Make the outer walls thicker since you can see infill if you do not thicken the walls.
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Hashi Hanger is a cool and creative name for a chopstick holder. "Hashi" is the Japanese word for chopsticks, and "hanger" suggests that the holder can be hung on to something. A Hashi Hanger is a great way to keep your chopsticks off the…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
My take on a chopstick bank (hashi-oki) - I really love spiral vase mode ;) Prints damn quick and is quite rigid. Printing instructions This is not meant to be printed as a solid object! use regular draft print profile (0.3 layers) enable…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This is meant so that you can wish utensils with a thin stem such as Chopsticks, Spoons, Forks, etc in the dishwasher basket without them falling through. IMPORTANT: The models are solid. In order for this to come out in the photos you…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wondered, which fan-upgrade would be worth it, so I decided to take a more powerful 5015 fan - the EBM PAPST RLF35-8/14N 24V. I remixed the original BEAR Fan duct, so credits to Bear Lab…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
add something later here =)
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small animals that lives in your basement. Always hungry, they seek out and consume crumbs that fall from the mouse's mouth. Print instructions I decided not to cut the model and print it at once.
Wydruk około 4,71 €–5,76 € nettoWstępna wycena jednego wariantu
I wanted to make my friend who loves makeup, a souvenir. I prefer it without the cap but I uploaded it too if you want. I recommend you to resize it for your personal preference.
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
INFO Inspired by this model: https://www.printables.com/model/222261-japanese-tea-ocha-coaster I decided to use the word chopstick in Japanese (Hashi “箸”) for the chopstick holder. PRINT Can be printed with solid color, or with color…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Met deze uitbreiding kan je wel 5 kapstokken onder elkaar hangen. Dat is op zijn minst 2 maal zoveel plaats in de kast. With this extension you can hang up to 5 coat racks under each other. That is at least twice as much space in the…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Een opzetstukje voor een te smalle kapstok haakje. Dit voorkomt dat de haak door de kleren steekt. Met 3mf bestand kan je zelf de opties aanpassen. An attachment for a too narrow coat hook. This prevents the hook from sticking through the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo Because my wife has so many belts, I make a coat rack for it. You can also use it for ties. regards ludo
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Om aan de kast deur te hangen. Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo To hang on the closet door. Because my wife has so many belts, I make a coat rack…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fully Printable without any supports, but Im not holding you back if you wanna use some. Just make sure to print it with a max. .2 layer height! And then you should be good to go. For Infill nothing more than 5% Gyroid is requiered or…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
Foldable chair is simply for storage in car, van, wardrobe, or take it to picnic place. Tested with sit on it and stand on it, all OK (80kg) Print it with PETG Z=0,3 and with support. Suggest 3 perimeter. For BIG side and Small side You…
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Are you bad at building decks? Well this is the deck box for you! As your personal statement on the quality of the deck within, this deck box is a modular container capable of holding up to 110 double sleeved standard sized trading cards…
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
They may have taken down the Trump/Epstein Best Friends Forever statue, but now you can celebrate Friendship Month at home and make your own. Larger version of the statue STL available to download here:…
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
I really liked the original Desktop Dumpster (see original model link above), but didn't want to have to use a metal rod or print another part to use as a hinge so I just modified the holes to fit a standard piece of 1.75mm filament. Push…
I designed this Chopstick Holder set with tray in SOLIDWORKS for the Printables Chopstick Holder contest (18/02/2023). It is already orientated to print easily in STEP & STL files so no supports required. The 4 Chopstick Holders fit…
Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr
A big dumpster bin. Approx 200x150x145. It's a simple print. It doesn't need any supports and doesn't require filament or screw hinge pins, so should be scaleable up and down (within reason).
Reupload from https://www.thingiverse.com/make:1001365
Chopstick helper for sushi, sashimi, noodles etc...
Are you having a fight everytime you're trying to eat with chopsticks? This is your solution! 😉 These are fingertips with attached chopsticks. Just slide them on and enjoy a meal without chopsticks flying around. The finger tips are…
A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…
Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.
Description A simple and functional heart-shaped clip that keeps chopsticks aligned and easy to use. It improves control, making it great for beginners and everyday use, while adding a subtle hearth accent. Sizing Depending on your…
I designed a Chopstick Helper, because I didn't like the existing models. My design focuses on stability and should fit most chopsticks (see photos). The holes are angled slightly to make the chopsticks spread apart a bit at the bottom.…
This is a makeup organizer. It can accommodate 8 lipsticks, makeup brushes, perfume bottles, etc. Choose the short or the tall version - both work great! Check out more great home organization, collectibles display, props, and other fun…
Benne à l'échelle H0, pouvant être utilisée en modélisme ferroviaire. Je modélise tous mes modèles de manière à ce qu'ils soient imprimables avec une imprimante à filament (FDM).
Finger Chopsticks. Category: Kitchen & Dining
Another, cuter take on the common dumpster fire meme from the last few years.
He holds stuff! Either paint or add in color switches to get the black, I like the aesthetic of simple sharpie. No Supports needed, just snip off the small supports in the hands.
This is my most popular download from that other less reliable site. The lids have undergone numerous changes over the years and are still a bit fiddly to print and assemble. But I have done it and so has others. It's great for 1/18 scale…
Inspired by Snactiv ( https://snactiv.life ), these are wearable chopsticks that allow you to snack without getting your fingers dirty. Perfect for when you're working, gaming, chilling on your phone, ... A sleeve is included to keep the…
Ever wanted to roll your backpack straps into a nice cylinder? Don't say you didn't do it as a kid. This SnapStrap simply snaps and holds your backpack strap tight so that it doesn't come loose anymore. Secondary its also really fun and…
Created by https://www.thingiverse.com/Zydac this Tool helps kods (and adults) to use chopsticks the right way. This chopstick trainer can be used squeeze to close (standard) or squeeze to open (to hold your food in place). Perfect for…
🐟 Fun, functional, and perfect for sushi night! This Fish Chopstick Holder adds a playful touch to any table while keeping your chopsticks clean and elevated. Printing Instructions File in STL to print without any support or brim . The…
Little Bowl to go in your hair
The Impossible Chopsticks Holder is a clever and fun design! This unique model will hold your chopsticks and make a great conversation piece at your next dinner party. Disclaimer: Please be advised that the Impossible Chopsticks Holder…
You: “got the stl?” Me: “Yes, jump to the end.” I've been trying to get a good handle on a parametric design models. I think I got it under control now. Always helps to have a good problem to solve. Simply put, edit the input parameters…
I was looking for a small garbage bin to keep close to my printer for failed prints and other excess material to throw away. I was looking for something rectangular to maximise the volume while fitting in the limited space I have…
Model is fully parametric, download the .f3d file to adjust and size for any pair of chopsticks. Recommended to print in PETG (or PA if you've got it), model oriented on its side so the fibers run through through spring component for…
Enjoy cube drafting? Or maybe Jumpstart? Print some of these! Very low filament utilization (~20 g per inner/outer pair), fits 15+ double sleeved cards, or 21+ single sleeved cards easily. I printed with a 0.6 nozzle in PLA. If you're…
I always used to lose my chapstick. Now I might actually be able to finish a tube….maybe. Print with supports at whatever layer height you want. I recommend using 4 walls and at least 20% infill to keep the loop strong so It won't break.
Great 1:18 model originally designed by tanner3d . I scaled to 1:87. Dumpster : 21.2 x 11.9 x 13.4 mm Lid : 19.8 x 12.1 x 0.7 mm
Somewhere to put your chapstick.
This model requires no supports. The wheels should be printed on a raft and glued into place (Superglue / Cyanoacrylate) Small piece of filament is required to complete the hinge mechanism, use heat or glue to fasten it into place.
This is a fully functional lipstick, except it doesn't stain ;). It is modelled after a real lipstick. Print settings Just normal PLA settings. Assembly 1. Click the lipstick_BalmComplete model into the lipstick_Bottom. 2. Slide the…
An origami inspired chopstick rest. Model is able to be printed without any supports by printing on the back tail.
I wanted to put a dumpster on the storage wall because i thought it would be funny. So i added a smooth connector to the back
This remix has rounded outer edges to make it more comfortable to hold. This chopstick trainer can be used squeeze to close (standard) or squeeze to open (to hold your food in place). Based on the model by Zydac.
Check out Poison Apple Prints on Patreon for loads more Disney inspired stl's! including Articulated Mushu and a Mulan inspired zen garden in honor of Chinese New Year! https://www.patreon.com/PoisonApplePrints The chopstick adapter is…
-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…
This model is compatible with the lego system.
Got this idea when I saw the contest theme and wanted to see if it works. It sure did and I'm quite happy with the result. This kitty will hold your chopsticks but it won't be stoked about it. It also works nicely as a pure deco or fidget…
This model is similar to the Little Ouchie fidget going viral on Tik Tok. This one features a storage location fit for chap stick tubes. I could only find a larger off brand lip balm my kids had around to use as a reference. The lid…
Printed in PLA, 45º, raft, without support
Modelled and printed this for someone on my team who ended up moving to another position. Figured I'd let everyone give it a shot! Added a sticker pack for download too! (Available in the photos)
Originally made for an AD5x, at 3" high this poop dumpster will fit most printers. plain bottom is to make it more printer friendly than the scale dumpster models
20x12x17 cm dumpster with swinging lids need 4 M3 x30mm hex socket head screws 4 M3 nuts to attach the lids
Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…
Einfacher Laptophalter, die Stangen Sind in verschieden Toleranzen verfügbar Simple laptop holder, the bars are available in different tolerances
Handy Chopsticks – Fun & Functional 3D Printed Sticks Handy Chopsticks are a fun and clever tool designed for gamers who don’t want to choose between eating and playing. Each stick ends with tiny hands that help you grab food easily…
A simple lipstick organiser that fits into IKEA ALEX drawer unit. Link to the post .
Always loosing your chapstick? Look no further, here's a perfect chapstick holder for your nightstand, kitchen, car, drawer, cabinet or wherever you keep your chapstick. Imagined, designed, and created by my 9 year old son who gets really…
A little sanding is needed in the end.
I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…
These chopsticks are designed especially for enjoying sushi, but they’re also great for other Asian dishes like ramen, dim sum, or pad thai. The built-in support makes them ideal for beginners or anyone looking for a more comfortable…
Designed to be glued together, this dumpster is easily printed, and makes great desktop storage. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.25mm for Lids, all sides, and bottom 0.15mm…
Four little Japanese garden miniatures. I initially made these to submit in the 2023 Chopstick Holder contest [here] , but missed it by a few hours. Thought I'd post them anyways :P My printer gave me some difficulty with the tiny…
This is a printable hinge for the desktop dumpster. Print it upright with a large brim. Glue on the cap once it is installed.
Chopsticks for decoration. If you want to eat with them, first cover with food-safe varnish. Its possible, the sticks were infested with bacteria, if you do not.
A quick and dirty remix of the desktop dumpster with beefed up hinge eyelets and less unnecessary overhang on the lids. Otherwise same scale so will use 2.5mm wire/rod for the hinge pin (same as “10awg beading wire”)
Gridfinity chapstick holder. Made this for the ChapStick brand. Might fit others.
In the slicer I remove the first milimeter from the bottom or to avoid putting supports. Print instructions In the slicer I remove the first milimeter from the bottom or to avoid putting supports.
Hipster giraffe funny cartoon outline drawing
I needed a boxes for MTG Jumpstart packs to be able to replay them easily and a way to store them. The base box has 3 rows that can contain 14 jumpstart boxes. Each jumpstart box can contain 21-22 single sleeved cards. The base can also…
![Lipstick organiser [Organizér na rtěnky]](https://media.printables.com/media/prints/243042/images/2193376_9fbe0dee-2702-4981-b8d0-cc9fd1f6ea91/21_4.jpg)
