Liczymy pasujące modele…
I got asked if I can make the logo so that it can be placed on a table or something. Made some changes and only tried printing the connection between the parts. For me it was a snug fit that should work to hold it together but you can…
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
Ornate Tusken Raider Gaderffii Head Stock 1++ inch bore for inserting 1-inch dowel. A Relic Unearthed: The weathered Ornate Tusken Raider Gaderffii Head Stock, once a symbol of power and savagery, now rested amidst the carefully curated…
This is a simple box for the radius guage cards at https://www.printables.com/model/119945-radius-gauge-cards The text on the box might have some first layer adhesion issue, particularly the centre of “A”. So you may want to pay extra…
Print your own 1:490 scale (estimated) model of the Northrop Grumman B-21 Raider aircraft! The B-21 Raider is designed with advanced stealth technology to make it virtually invisible to radar. Its shape, materials, and coatings minimize…
Fallout : Female Wasteland Raider
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
NOTE 2025: This design is OLD! I made this back in 2016 for my Makerbot Replicator 2. So the design might not fit on your print area. And you have to print it at the original size to use the metal bearings. Also the printers back then had…
Hair Braiding tools - Hair Styling Fishbone DIY Hair Styling Tool Kit, Ponytail Maker Accessories TOOL1 TOOL2-3 TOOL4
Video Video with thread Squarebraider Video This is an advanced print with complex mechanics - if you are not experienced with printing and engineering, please start with the 2 gear (flat braider) version! Bobbin pins are 4mm so you can…
This is a remix of the Siren by MlePh. https://www.thingiverse.com/thing:1568198 It is scaled down by 80% to fit easily in a 200x250 bed. But once adjusted, it is VERY loud! (completely saturated a phone mic at 2 meters for example).…
Ah, Gen 9 is here! With Scarlet and Violet come two new legendaries (so far...) which are just awesome! Here is Koraidon
These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…
It has all happened before and it will all happen again. In hot pursuit of the Colonial Fleet, the Cylon Raiders swarm in to attack with overwhelming numbers. Commissioned to go along with my Viper MK.II Kit Card , you too can create your…
Consists of 2 different objects, which have multiple version. Jormungandr braid coil Two model version, varying in degrees of twist and tilt of head. Printed vertically 2 layer raft for bed adhesion and support of first layers. Does not…
Hi I've taken what I can from the original files and converted them as best I can to a possible prinatble file. Hopefully there is something in amongst this model that will help you with your project. As always check the sizing suits your…
This is my first prototype of a 3D printed braiding machine. The machine was built by me in 2022. I have published a video about it on Youtube . In 2023, I made a major overhaul of the machine and ironed out the bugs in the prototype. You…
Modified parts for https://www.thingiverse.com/thing:1568198: SirHa_Kurbel2.stl -> PNU_handle_grip.stl. Cut an edge to the top and bottom plate as at least my printer can't print circles in air Gehäuse_2_a1.stl ->…
It belongs in a museum! Or in your office. Or maybe the mantle. Who knows?! It's entirely up to you where to display (or store) the Ark of the Covenant. Hopefully, if you're taking the time to print this out, you're not considering…
The braided Christmas tree is an easy model to print. The tree and star need supports and concentric top surface
This is my model of the B-21 Raider. Not a very accurate model with the public knowledge but close enough to get the idea.
Here is the file for my Braid Vase model This is designed for vase mode to allow re-scaling to a size that is good for you Enjoy If you like what I am doing please consider buying me a coffee or tipping. 😁👍 Buy me a coffee
My primary printer is a Prusa i3, and the bed size was just not enough to handle the original design. I had pretty good success with the 80% build by MlePh ( https://www.thingiverse.com/thing:3410556 ), but I wanted to scale up in size.…
27. Dec. 2023: A sports bow that can be used with my UGH mod Renamed the model. This is now a set Available soon: Back holster for the bow Hip holster for the ice axe Print the parts with 0.15mm/0.10mm layer height. Bow: You will need my…
A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…
Stamp for leather patterning
This is an air raid siren built to go inside a Stuka dive bomber model. The Stuka was a German terror weapon used in WWII. As it dived to drop a bomb, a siren would sound out from the plane to terrify the people they were bombing. This…
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
I couldn't believe that I couldn't find a Cylon Raider from the original series (TOS) on Printables, so I had to add this one from newtrix on Thingiverse. His is a remix of Astrofossil's design also on Thingiverse. Newtrix split the…
takes a 1/2 in dowel in a couple spots. split for printing. Category: Props
Just a simple Raiders Name Tag ;) Easy to print in 2 colors.
This model is compatible with the lego system.
incruste la cabeza del modelo en el DUMMY 13
A post-apocalyptic remix using Super Hero Mask
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
Ever wanted to annoy your neighbors? How about your whole neighborhood? Well this is it! This little siren is dumb loud. Its a nice little 8 port siren that screams loud enough to make you question your life choices and wonder if its even…
Two piece braided slide hair pin. I wanted to make hair accessory that would look fun in dual color. Tested with 0.4mm nozzle Sunlu PLA+ 15% infill Layer height: 0.1 mm First layer height: 0.2mm Solid layers, top and bottom: 6 5 mm brim…
ARC Raiders Shield Recharger - Assembly Guide Listen up, Raider—getting vaporized by ARC drones because your shields are down is embarrassing, so print this recharger and stay in the fight! Instructions Print all parts using your…
Design Concept The "MATRIARCH" model is inspired by the game ARC RAIDERS, capturing its essence with intricate details that bring a mechanical design to life. Its robust limbs and detailed bodywork showcase the power and complexity…
This print was done on a Bambu labs p1s using the following colors white, sky blue, black, and red. Surprisingly durable for how small this model is.
A set of various sizes as well as the parametric model file. Sizes make a pleasing thick braid ~10" (25cm), 7.5" (19cm) and 5" (13cm) long. Print the test print beforehand to see if your settings are correct :). any issues please message.
Relive the classic sound of World War II air raid sirens with this exclusive 3D print model. Designed to actually work, the siren uses 2212 brushless motors with ESCs, controlled by Arduino, allowing speed adjustments, sound effects, and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
This is a remix of: https://www.thingiverse.com/thing:2763110 I also preferred the rear axe tip section of this model: https://www.thingiverse.com/thing:3064861 ... So I mixed that part into this model (before I sliced it). I chose this…
Tusken Raider and his Bantha. “bantharaider” is model combined.
The other files are complete ready to print, but will need seperating using Windows 3DBuilder. here is a link to a video to help with further seperation. https://www.thingiverse.com/thing:3077839 Print instructions Unassociated tags: Body…
Thank you for downloads, likes… Enjoy !
Even though i said that i couldnt make any more models because my pc sucks, but here i am! I couldnt bring myself to stop doing what i love. I only printed this in PLA because i dont have any PETG on my hands, unfortunately. If you print…
This Arcs not created by my self i will share with all. And i Link it to the creator from this files
Simple ARC RAIDERS coaster i made for using the AMS function and print in two collors The lettering is 0.4mm and the coaster is 2mm thick so i doesent use much fillament at all *You can print the Base part without the AMS and Pause at the…
Lucky 13 Hair Braid Requires 00A07 Armature Clavical to be printed repeatidly to make braid.
hell divers 2
A goblin raider miniature for tabletop gaming. Print instructions Category: Creatures Print Settings Printer: Monoprice Select Mini Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 20
This model is compatible with the lego system.
Made this for a buddy of mine. All done in tinkercad. The silver sections are raised up so it is ready for a color change at 4.2mm. Print instructions No specific instructions. Color change at 4.2mm.
this print is going to need lots of supports so i would recommend playing around with the demotions depending on the size.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Tool to support creating woven bracelets - the art called kumihimo. It is an easy print - use the pre-colored .3mf file with your Prusa slicer and print this disk for your bead weaving needs. There are 32 slots around the outside of the…
Raider X Only | Raider MP17 Here I had trouble with 0.6 print head, which would not accurately print the surface of the cheek weld near the flux rails. The rail position distance to the surface is limited by the “gas cap” of the raider,…
Cylon Raider : Battlestar Galactica 2004 Series bio-mechanical life form . While it resembles a sleek, "Cylon-head" shaped spacecraft, it actually possesses a biological brain, organs, and even blood, allowing it to "resurrect" into a new…
Here is the awesome looking Las Vegas Raiders Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
disclaimer the model is not 100% similar to the images featured for the original on cults since I only have 4 colors to work with mainly the chest part not having the glow aura because I couldn't fit the yellow accent color and didn't…
This model is compatible with the lego system.
FIRST OF ALL: the model is not mine, I found the STL (probably a scan) on internet, I found it under many alias, so I do not put here any, if you recognize that it is yours, please let me know I put your name and link. It could be printed…
I saw shusy's design a while ago and had the idea for this. I used Ctrl-P's remix for the base. I prefer it without the lid so you can see more awesome Tusken detail. I also considered gluing a spring in there to make it more of a…
This charming gardener gnome is a delightful new addition to the whimsical gnome collection. She features a tall, pointed hat that bends gently at the top and fully covers her eyes, with only her round nose peeking out. Like the rest of…
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
The whole model is about 3.317 inches wide one way and about 2.043 inches wide the other way and about 1.741 inches tall (can be resized if needed). Estimated print time is about 1:15:00. It will need supports. Enjoy!
DISCLAIMER: I don't personally own a printer and can't print this out to test so it might jam up bc of the insane overdrive ratio and lack of actual bearings So its basically just an air raid siren powered by a hand crank. It uses a…
A printable model of a grenade from Arc Raiders.
I am pleased to present the logo model that I have created, which I hope will prove beneficial for your projects. This logo has been designed using Shapr3D, a versatile modeling application that allows for precision and creativity in…
Wall Count: As many wall counts to fill the entire part Infill: 100% infill Material: ABS/ASA
I wanted to design this braided whip last year, but I was missing modeling skills I needed. This year it worked :) The most difficult part was to understand the pattern, because on thing is the process of making it from willow twigs and…
Hairpin for cosplay. Dont forget that you need a hairpin clip to finish it or another hairpin making tool.
This model is compatible with the lego system.
This model is compatible with the lego system.
It supports standard sleeves and vertical storage. All models must be printed once.
Been on wanting some Berserk props, so modeled this up. Takes a .75in dowl through the center. Split for smaller printers. Category: Props
It's a stand for displaying. Here is the file of Arc Raiders Shield Recharger ( Made of Magic Make)
Raid mount for a 120 mm pc fan hole pattern (105 x 105) Category: Electronics
Paramètres d'Impression (Print Settings) Supports : NON (Le modèle est conçu pour être imprimé à plat). Matériau : PLA ou PETG (Le PETG est préférable pour sa flexibilité). Remplissage (Infill) : 15% à 20% (Cubic ou Gyroid). Hauteur de…
This model is compatible with the lego system.
This model is compatible with the lego system.
Printed with 0.16 mm layer height in PLA. Length is 15 cm, you might want it a little smaller. Modeled after the Hawk Raider sword from the Golden Age arc. Kind of big, to be comfortable for use with the big hardcover berserk manga. May…
This model is compatible with the lego system.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is a small Raiders logo placard (125mm x 137mm). It will print quickly since it is light and thin. Three colors: White first, then grey and finally black.
Design in process… I tried to print the Air Raid Siren - hand crank version on my printer, but my printer is small. After printing version 3.0/3.1, which are scaled for small printers, and noticing with disappointment that the Air Raid…
![NFL Raiders Logo [UPDATED]](https://media.printables.com/media/prints/152477/images/1433724_922d1b5e-3fab-4447-bd0a-94cd3eaf200a/3d-print-raiders-logo.jpg){kind=logo}
