458 modeli
Rainbow Dash From TV serial My Lille Pony 11cm height Print instructions Model has Extra Supports for spiky tail, Printed from PLA Prusaments 4 perimeters infill 15% brim 7mm supports distance 3mm
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Toy. Sensory tray for kids. This model is capable of being printed with the rainbow color combination or any other color combination you like. I am including the .3mf file, configured with manual color change. The first and last layers…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
This is a rainbow designed by me, which serves as decoration. I have uploaded it in two different widths. Print it vertical with no supports. The narrow 1cm/8cm/14cm (picture). The large 1cm/12cm/14cm.
Wydruk około 3,86 €–4,71 € nettoWstępna wycena jednego wariantu
For Ikeas Skadis here is a small decorative Pin/Insert in a rainbow form, either the pride flag or the bisexual flag or any other three striped flag. Because I don’t have access to multiple colors of filament or a printer to use multiple…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Not too much to say, I've included a .3mf with all the slicer settings I used and the whole assembly on one build plate. You will need a nail or paper clip just to retain the gears on the shaft.
Wydruk około 7,35 €–8,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick and easy print to connect Rainbow loom bracelets
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I honestly have never played Rainbow 6 but my friends say it good so I made this logo for them. It comes with a stand. I would recommend setting the scale to 300 but I made it smaller for a key chains.
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Notes: Printed with supports: Drone Body 1 Printed without supports: (everything else) Always print: Drone Body 1 Drone Body 2 Drone Shaft 1 Drone Shaft 2 Drone Tail For Regular wheels print: Wheel 1 Wheel 2 For TPU/Dual colour wheels…
A ColorMix painted variant of @satukoro's lovely 12-point fidget star , using 12 color mixes to produce a mesmerizing 12-color rainbow cycle. The 3MF file uses ColorMix virtual extruders, so it needs to be opened in PrusaSlicer 2.9.6 beta…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…
So this is actually a remix of a remix of this collapsible broadsword that I found originally on Thingiverse, but I'm hoping I can share it here instead of there. This is the remix I'm remixing: https://www.thingiverse.com/thing:4330414…
This keycap was modeled from scratch using one of the keycaps from my MX Cherry Red based board. I converted the Rainbow 6 Siege Logo to an SVG, and using a series of extrusions, splits, and cuts, ended up with a custom key where the R6…
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:…
The Rainbow Arc Lamp blends minimalist design with a soft, poetic glow. Inspired by the gentle curve of a rainbow, its ribbed 3D-printed structure diffuses warm light, creating a cozy and modern atmosphere. Perfect for bedrooms, living…
Eye-Catching Aesthetics : This design features a mesmerizing array of concentric hearts, each layer playfully wobbling independently of the others. Use tricoloured filament to create a rainbow effect that's sure to catch the eye and warm…
Based on the standard base for Rainbow High dolls The main beam has been changed, it has become thicker and stronger than the original. Inside the model there are 2 different lengths. 203mm (With lock) and 183mm (Also with lock) 2 types…
2d multimaterial rainbow u can paint it or print multimaterial
Jynxzi streamer charm from Tom Clancy's Rainbow 6 Siege
Modular rainbow wind spinner, print as few or as many levels as you like. Includes a wind vane. Spins even in a very light breeze (GIF is from a video shot in 2mph wind) Mounts on an M8 threaded rod (mounting blocks included), use one 608…
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
This is a Proxinity Alarm from Tom Clancy's Rainbow Six Siege. Since the file download of Thiniverse is bad, I included "R6PA_All_Files_ZIP.ZIP" to download all files at once. You're welcome. It was modelled in Fusion360. F3D files are…
I found this model at MyMiniFactory and modified it for easier printing. I also added a stand and made a fuse out of wire and a key ring. For better details, use the variable height layer on the Impact Grenade button part as you can see…
Note that the lines in the middle of the arches do not reach the full depth. This creates the rainbow impression but keeps the earring as one large piece.
This model was inspired by https://www.thingiverse.com/thing:1603188 Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 10 % Ironing: Top layer
This is the 8 color rainbow I designed and printed on the Mosaic Palette 3 Pro! https://youtu.be/A4wQiy47opI
updated 1/15/2023. I had initially made them threaded as I thought my kids would break the arms and then I'd just unscrew and reprint. Which they have, but I tried to make the thread tolerance bigger and it just became a pain to try and…
This is another Blue model from Rainbow Friends. I had a couple requests to provide my original Blue model in separate pieces. Problem was, it was the first model I created. So I had did too many edits and merges to it that I could no…
A printable version of the original Rainbow Loom! I needed a lot of extra rainbow looms to make a certain bracelet, but I didn't feel like spending the money on three more of them. So I decided to whip out the calipers and make a…
My first more complicated model, at the same time it was requested by my 7y old nephew. Hah. So there is that. As far as I know everything should work relatively well together. The ball sockets also become loose after while so the model…
Cookie cutter in the shape of a rainbow Vykrajovátko ve tvaru duhy
A very simple model. It is enough to set the filament exchange at a certain height in the slicer (see picture). And then just print.
ROLLING CLOTHING DISPLAY ,hope you like it
Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…
This standalone Rainbow Trout sculpture captures the sleek form and distinctive markings of the species. Flowing fins and detailed scales provide realistic aquatic texture while keeping printing clean. Designed without a base, this trout…
The gummy bear models are a remix of ‘Low Poly Gummy Bear’. The case that will house the gummy bears are my design. The “GUMMY BEAR” title on the box cover is placed to be printed with Octagram Spiral fill pattern. Looks great but not so…
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
Rainbow in pride colors. Print each stl in different colour, glue together if needed but it holds together well if just sitting on a desk. Pictures above were printed in 0.3 layer height.
This model uses the following electronics: 1x OV2640 120 degree camera 1x XIAO-ESP32-S3 Sense 1x ESP32-S3 2x SimpleFOC Mini 2x AS5600 2x GBM-5010 T150 90Kv 2x MP1584 PSU 1x 4 Cell Lipo See pictures for wiring Diagram. If you have any…
Resize, change the number of layers (layer height and Z height) to get the print time and tool changes desired. Add the number you want to print together to save time on color changes. Choose the colors you like!
-I've created 3d models of the Rainbow 6 Champion Rank. These must be highly scaled in the slicer (Cura will auto-scale), due to an issue in Onshape with exporting to stl, however the details still appear well. -Each file is each color…
Material Used: Prusament PLA Blend Viva La Bronze
This vase is perfect for holding flowers, pens, or anything else you want to display in style. It was printed in PLA in one piece and without supports. Printing Instructions The model in the pictures was printed with a layer height of…
Contains a .stl and .3mf file.
Print Settings: Material: PLA Infill: 30% Layer hight: 0.15mm Support: No
It's been more than a decade since our release of the Rainbow , and it has proven to be an effective, durable, and influential design. The design of the catch was a reflection of the fabrication techniques that were common at the time:…
This is a remix of my model of Green from Rainbow Friends. I made it 1 full piece where the back of him is flat for those who would rather print him laying flat on the bed. I added tree supports from base plate only for his fingers. I've…
Wall art- Unicorn with rainbow
Set of blocks I printed in different colors to look like a rainbow. They have grooves in them so that they can be seated together pretty well. Added April 2023: A cloud-like base piece that holds the complete rainbow There are only 6…
A stand for a popular type of doll. Fits all Rainbow High models
This is my recreation of the CCTV camera from Rainbow 6. The design uses a twist lock mechanism. Use #8 screws or double-sided tape to attach the mount plate to the ceiling. Press fit the dome into the body then twist the assembly onto…
Light up your bleak autumn days with this kinetic sculpture. RAINBOW ROLLER-COASTER is an addiction making matter. You will not be able to tear your eyes off! Smooth movement is ensured by one motor and the whole assembly is very easy!…
Fuzes cluster charge from R6. Its Dodgy if I'm being honest, I've never really made anything in 3D but it was still fun. The bolts on it are fake and for show only.
My daughters wanted a stencil for a rainbow. Hope you like it.
This is a sort of copy after Montessori Rainbow Tunnel Stacker and Puzzle that I designed to print it for my kid but I have't have the change to get all the colors that I need. Maybe you guys have the colors and give it a try.
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
Arch-shaped rainbow coaster with ringed design - perfect for wedding decor! Save money and print your own wedding decor. Add a unique touch to your home with this unique coaster! 3D PRINTING SETTINGS -Layer Height: 0.2mm -Top/Bottom…
Visualize your rainbow candy in rainbow form with this rainbow organizer. First model ever designed and designed in TinkerCAD.
I designed this cloud base to go with the 6-piece rainbow I also designed. The rainbow can be found here: http://www.thingiverse.com/thing:728320 Took about 12H 25M on my Prusa i3, white 1.75mm PLA, 25% infill. Category: Sculptures
I couldn't find a bookmark with a rainbow on it, so I found two suitable models and merged them together. Hopefully somebody else finds this useful. Remixed from: 2018 Rainbow Xmas Ornament ( https://www.thingiverse.com/thing:3292563 )…
Le petit support pour faire des bracelets et des figurines avec des élastiques rainbow loom. Je l ai imprimé en PLA+ avec une hauteur de couche de 0.16mm. Ça fonctionne très bien.
rainbow stencil drawing templates
Montessori toy for babies
All parts in the example pictures are printed with a 0.16 mm layer height. Everything should just snap together. Update: Since the base can have a pretty tight fit, I included some alternative version with a bigger offsets. The can be…
This is a remix of my model of Green from Rainbow Friends. I made it 1 full piece for those who would rather print him like that. Add normal supports from base plate only. You will need them under his arms. You don't have to add them…
🌈 Rainbow Pen Holder – No MultiColor or Glue Needed! YouTube Video ✨ This playful and vibrant rainbow pen holder set is 100% 3D printable and designed with makers in mind. It consists of interlocking parts that form a complete rainbow…
Rainbow cookie cutter in sizes between 2cm and 10cm
High Polygon Unicorn in Rainbow-Style jumpin on the Clouds. In Obj and STL Looks amazing, you will know what to do ;)
Add color (filament) change after 2 mm. Made this for my daughter to color it with acrylic markers.
https://www.instagram.com/kuleshow/ 🪡🧵🧶 Take care of your fingers 👆🩸 Approximately 1.5 grams (0.05 oz) of filament 🤏 Easy print, No support Magic Acorn Needlecase 🪡🧵💕 https://cults3d.com/en/3d-model/gadget/magic-acorn-needlecase
the parts need to be glued together after printing depending on your Printer some parts need support and/or rafts the yarn for the button eye is very small and difficult to print The Spring and Based I use are Designed by 3d Printy
Un llavero del personaje Blue para imprimir desde la base aplicando varios cambios de filamento en cada capa. No tengo MMU2S y he laminado para que reproduzca el funcionamiento de un multimaterial pero llevando a cabo los cambios de forma…
Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Want to sell prints of this model? A commercial license is available on my Patreon: https://www.patreon.com/Elizabeth3D Like my free models? Support me on Ko-fi: https://ko-fi.com/elizabeth3d A black dragon riding its own breath: a column…
Rainbow coming out of a pot of gold. Used as a tree topper for St. Patrick's day. Over all size is approximately 50mm x 95mm. Rainbow is 54mm x 50mm, pot is 41mm x 41mm. Print instructions Unassociated tags: st patricks day Category: 3D…
This is a sequential discovery puzzle box with two internal compartments. The first and larger compartment requires 42 moves to reach, and the second, more hidden compartment requires an additional 53 moves. This model has been refined…
KINDLY USE GLUE, YOU CAN USE TRANSPARENT PAPERS FOR THE GLASSES,
Rainbow Six Siege Chip, same size as a 1€ coin to fit into shopping carts.
For the upcoming Pride Parade in Prague, my girlfriend (who works for a beer company) was looking for a fun gift for colleagues walking in the parade. Therefore, I designed this colorful bottle that can be used as a keychain. Find me on…
DIY Coloring – 3D Printable Coloring Panels! 🎨 Print, Color, Create! Print in white (best for coloring) or any color you like. Finish with coloring the outlines black for a amazing effect! Scale it big or small 🛠 Scaling Tips for Best…
INTRO Introducing Typhon, my first-ever blaster design project initially concepted in May 2022! It's an accessible, modular rainbow pistol blaster that come packed with features and options, plus plenty of room for more!! FEATURES Easy to…
This is Blue from Rainbow Friends. There are two keychains of him. 1 is a Blue's whole body, while the 2nd is a smaller circle keychain. At 100% the larger one is 72mm x 108mm (2.8" x 4.25") and the round one has a diameter of 68mm…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
This is an alternative mount for Rainbow on a Matchstick for the V0.1. This mount: Hides the PCB completely Includes a diffuser that can be printed out of natural or white filament Snaps in and out of 1515 extrusions Printing Each of the…
Hello everyone! It's a modern and slick rainbow tray and it's perfect for holding your keys, your jewelry, wallets and Airpods. You do not need any support and you only need to make sure you activate a brim for a good bed adhesion. Cheers!
Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
This should be semi correct scale of Fuze's Gadget from Rainbow 6 Siege. You'll have to glue the side pieces to the body, side cylinders to the side pieces and battery or screws on each side piece. If you want to modify the model, feel…
This adorable rainbow snail is designed to bring smiles! With its rounded body, big eyes, and flower-like colorful tail, it’s perfect as a toy, desk buddy, or just a cheerful decorative print. Optimized for multicolor printing (AMS/MMU)…
I saw on Twitter some awesome paper craft to make these flowers and other designs and we got to talking and said, why can't we 3D print this? SO into fusion360 I went. The results are beyond what I could have imagined. each print takes…
A simple modern rainbow vase or pen holder, available in 2 sizes, depending on your flowers or needs :)
I designed a Rainbow Six themed keychain i wanted to share. Change the scale to your liking. In the attached pictures it was printed with a 0.4mm Nozzle an 0.2mm layer height at 110% scale. A 0.25mm nozzle would also be nice for the small…
For multi color print there is no mmu necessary. Use the different heights to change the colors. You can customize the size of the magnets in the .f3d file. Pause the print before the holes for the magnets are closed, insert the magnets…
SUPPORT MY WORK If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available: PayPal Subscription Plan: Subscribe Here Patreon Site:…
What every Christmas tree needs are LIGHTS! Inspired by pauloricca's LED Christmas tree from back in 2009, (thing 1406), it was hollowed out, a mounting hole added and a base designed to enable me to string a number of these together…
