Wyniki wyszukiwania: rau

Sortowanie

2457 modeli

P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Pobrania
2224
Polubienia
321
Ocena
4,8
P
Printables3D KIMBA

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…

Pobrania
2124
Polubienia
471
Ocena
4,88
P
PrintablesWingedFuse

Case for Flipper Zero Wi-Fi Module with Ruthex threaded inserts + Marauder skull logo version

This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…

Pobrania
1558
Polubienia
162
Ocena
4,79
P
PrintablesNozzle

Bohrschablone Hohlraumdosen 71MM + 91mm Bohrabstand

Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…

Pobrania
751
Polubienia
41
Ocena
5
P
PrintablesFokieH

Schraubgriff / Screwhandle -- M3 - M12

Antrieb für 6-Kant Schraube oder Mutter um diese Werkzeuglos betätigen zu können. Hierzu einfach die Schraube bzw. die Mutter in den 6-Kant eindrücken und dann verwenden. Hier ist ein ganzer Satz verfügbar (M3, M4, M5, M6, M8, M10 und…

Pobrania
470
Polubienia
113
Ocena
5
P
PrintablesPeter Farell

Johann Strauss Junior Memorial - Vienna

Johann Strauss Junior Memorial monument found in city park in Vienna.

Pobrania
359
Polubienia
86
Ocena
5
P
PrintablesOkojo

Braun 3 Shaver Holder

I designed this holder for my Braun shaver. It has a slot for the cleaning brush, a hole for the charging cable, and a way to store the excess cable for the charger inside. I only printed the v2 model. The hole for v2 was slightly too…

Pobrania
328
Polubienia
37
Ocena
4,25
P
PrintablesMouky

M3-M8 Schraubenschlüssel wrench

M3-M8 wrench in a short and a long (20mm longer) Version. Models are stronger then these shown on the image.

Pobrania
326
Polubienia
12
Ocena
4,5
P
Printablestom

Werkzeugablage/ Tool tray for Feedback Sports Ultralight - keine Schrauben nötig/ no screws necessary

Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…

Pobrania
244
Polubienia
23
Ocena
5
P
PrintablesOaradla

Schraubstock Schonbacken 120mm

Schonbacken für meinen Heuer Schraubstock mit 120mm Backen. Dieses Modell kommt ohne Magnete aus, da es von der Seite aufgeschoben wird und mit dem oberen und unteren Steg absolut fest sitzt. Ideal zum Klemmen lackierter Teile. Die Backen…

Pobrania
222
Polubienia
28
Ocena
4
P
PrintablesMicha Müller

Türgriff Draußen/ Terrassentür Griff / Balcony Door Handle / terrace door handle / Window Handle outside/ Door closer

Eine Halterung die an die Tür geschraubt werden kann um die Tür von außen entspannt zu zu ziehen.

Pobrania
220
Polubienia
27
Ocena
0
P
PrintablesConnie

wire-haired dachshund/Rauhaardackel

Can be used as a keychain, car pendant or other decoration. Was by us for a colleague, where it is now hanging in the car. We printed it on the Prusa MK2 using the following settings: PLA (addnorth PLA) First layer 215° then 210° Heated…

Pobrania
215
Polubienia
23
Ocena
0
P
PrintablesSound-Maker

Schalterauslöser / Switch Trigger Makita DMP181Z / 180Z

Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…

Pobrania
211
Polubienia
14
Ocena
5
P
PrintablesMaaarsl

Vise Protective Jaws (Schraubstock-Schutzbacken)

I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…

Pobrania
171
Polubienia
16
Ocena
0
P
PrintablesPHabermehl

Messeraufbewahrung für BOSCH MUM4 Küchenmaschine

Der Halter besteht aus vier stapelbaren Trägern, einem Deckel, der den obersten Träger abdeckt, und einem Ständer, in dem der Stapel aus vier Trägern und Deckel aufbewahrt werden kann. Deckel und Träger sind mit Höhenbereichsmodifizierer…

Pobrania
170
Polubienia
34
Ocena
4
P
PrintablesOssilampe

Rändelschraube M5/M6

Ich Habe eine Griff benötigt um eine schraube auf und zu drehen, Bei einer Inbusschraube habe ich den Kopf mit einen schlitz versehen und unter dem griff eine Selbstsichernde Mutter. Dann habe ich ein Metallstift oder ein Nagel genommen…

Pobrania
160
Polubienia
3
Ocena
0
P
PrintablesBernd

6-fach o. 12-fach Bithalter für Bosch Professional Akkuschrauber GSR12V35FC

Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung

Pobrania
156
Polubienia
32
Ocena
5
P
PrintablesPeter Farell

Feyd-Rautha Pose from Dune 2

Feyd-Rautha Pose from Dune 2 - Fix and Re-Sculpt. I will keep this in the free area. I am not 100% confident with the fix. The model itself from andrdudka is awesome as fan art, but it had multiple issues for printing. And I was blowing…

Pobrania
155
Polubienia
37
Ocena
5
P
Printableseminail
Pobrania
146
Polubienia
16
Ocena
5
P
PrintablesSvěrákovi

Art deco coaster designs (for Xavier Faraudo's Geo-parametric coasters)

Please, go check out and download the designs and shapes from the original Geo-parametric coaster + holder + modifiers , however if your heart and living room decor yearns for the Art deco vibe like mine do, then here is a set of 3 covers…

Pobrania
141
Polubienia
47
Ocena
5
P
PrintablesMichal K

Bruder JCB 5CX Hydraulic pistons replacement - more of them

No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking

Pobrania
138
Polubienia
8
Ocena
5
P
PrintablesStaubi

Wera VDE Schraubenzieher-Halterung für IKEA Skådis Lochwand System

Wera Kraftform Big Pack 100 VDE, Schraubendreher Set 14-teilig, 05105631001 https://amzn.to/3Okh7wj Erleben Sie die perfekte Symbiose von Funktionalität und Ästhetik mit der selbstgedruckten Schraubenzieher-Halterung für das Wera VDE Set.…

Pobrania
138
Polubienia
12
Ocena
3
P
Printablesnetpaq

Braun ThermoScan and lens filters storage box

The box is designed to hold: Braun thermometer. 60 lens filters out of their boxes or 2 boxes of 20 filters (40). The finger notch can be used to store the lens protector when permanently keeping a lens filter on the thermometer. I…

Pobrania
137
Polubienia
16
Ocena
0
P

figurka Grzegorza Brauna

należy dodać podpory

Pobrania
133
Polubienia
7
Ocena
1
P
PrintablesF Engineering

Verkleidungs-Schraube Kreidler Flory

Verkleidsungs-Schraube für Kreidler Flory Modelle Zwei Versionen: Blinde Version für saubereren Abschluss der Verkleidung, kann auch mit Handkraft noch gut eingeschraubt werden. Original Version für den originalen Look, schraubbar mit…

Pobrania
133
Polubienia
4
Ocena
0
P
PrintablesLa Cave Au Chat

Tapping guide for 4040 Aluminum Profiles - Guide de taraudage pour Profils Alu 4040

Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…

Pobrania
131
Polubienia
17
Ocena
0
P
PrintablesLordTheCAndy

Survival Outdoor Nähzeug Schraub Box

Eine kleine Zylinderförmige Box mit ca. 130×20mm, wobei der Stift 8mm Außendrchmesser, 5mm Innendurchmesser und 80mm Länge hat, für lange und kurze Nadeln, sowie eine Rolle Faden Platz da ist. Schön mit einem Loch für Paracordschleife…

Pobrania
121
Polubienia
45
Ocena
0
P
PrintablesFlexi-Maker

Rauch-Wasserfall

Drucken Sie mit einem ungiftigen, hitzebeständigen Filament. Funktioniert mit PLA wenn man unter die Räucherkerze eine kleine Unterlegscheibe unterlegt. Es funktioniert auch mit normalen Räucherkerzen wenn man unten ein Loch rein bohrt…

Pobrania
114
Polubienia
21
Ocena
0
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter

Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…

Pobrania
108
Polubienia
25
Ocena
5
P

Waschbecken Stöpsel für M6 x 40 Schraube

Waschbecken Stöpsel Passend für die meisten Waschbecken. Hierzu wird noch eine M6x40 Schraube benötigt (Typ ist egal 6kt, Schlitz oder Kreuzschlitz) die ihre Grundeinstellung ungefähr 25mm über dem höchstem Punkt (gemessen vom Kreutz aus)…

Pobrania
97
Polubienia
10
Ocena
0
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Deckel

Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…

Pobrania
78
Polubienia
22
Ocena
5
P
Printablestom

Schraubbarer Trichter - screwable funnel for ÖRTFYLLD

Ein Einfülltrichter für Ikea Gewürzgläser ÖRTFYLLD. Der Trichter kann zur einfachen Anwendung auf die Gläser geschraubt werden. Die obere Einfüllöffnung hat ca. 70mm Durchmesser. Der Druck benötigt keinen Support. Google translater: A…

Pobrania
74
Polubienia
1
Ocena
5
P
PrintablesEli G

Spardose mit Schraubverschluss

Elegante Spardose mit Schraubverschluss. Gedruckt in PLA mit 0.25 Schichthöhe, keine Supports nötig. Das Gewinde hat eine Toleranz von 0.2 mm, ich denke dass müsste für die meisten Drucker reichen.

Pobrania
73
Polubienia
3
Ocena
0
P
PrintablesStefan Skotty

Toilet WC Mann Frau

Hinweisschilder fürs WC.

Pobrania
70
Polubienia
9
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 3xPG7 Cable Gland/ PG29 Blindstopfen-Adapter auf 3xPG7-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Pobrania
68
Polubienia
22
Ocena
5
P
PrintablesPat_S

Camera mount with screw for UNC 1/4" e.g. C920 / Kamerahalter mit Schraube für UNC 1/4" z.B. C920

Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar. Dimensions holder: Width 155.12 mm height 65,00 mm Depth 51,66 mm Dimensions screw: Diameter 25.00 mm…

Pobrania
68
Polubienia
12
Ocena
0
P
PrintablesStudi_Ha

smal Screw Driver Box / kleine Schraubenzier Schachtel

Ersatz für die alte Aufbewahrungs-Box meiner Uhrmacher- Schlitz-Schraubenzieher. Premiere für mich und meinen Prusa, mit vertiefter Beschriftung im gebrückten Verfahren! Die Schrift ist dabei auf der Druckbett- Seite und die nachfolgenden…

Pobrania
64
Polubienia
1
Ocena
0
P

Braun mixer MQ9 combi holder

trochu upravený a odlehčený držák na mixér Braun MQ9 s příslušenstvím. Ve sliceru je potřeba zvolit spodní plochu modelu - ořízl jsem spodek tak aby byl držák lehčí a vypadal lépe… Otvory pro uchycení jsou podle děr co už mam ve zdi.…

Pobrania
64
Polubienia
4
Ocena
0
P

Flipper Zero Marauder & NRF24 Case

Simple case for ESP32S2 WiFi Marauder & NRF24 Combo Board to be connected to Flipper Zero GPIO pins. You can find more info about this board at following link: https://www.youtube.com/watch?v=wT_4bzKULUo No screew needed to clip top cover…

Pobrania
63
Polubienia
23
Ocena
0
P
Printables3D Druck Profi

Schraubenschlüssel-Halterung

Man kann alle seine Schraubenschlüssel in die Halterung legen.

Pobrania
59
Polubienia
5
Ocena
0
P
Printablestom

Schraubbarer Trichter für Gewürzgläser - screwable funnel for spice jars

Ein Einfülltrichter für diese Miorkly Gewürzgläser: https://amzn.eu/d/0cwdLx6 Der Trichter kann zur einfachen Anwendung auf die Gläser geschraubt werden. Die obere Einfüllöffnung hat ca. 70mm Durchmesser. Translation DeepL: A funnel for…

Pobrania
57
Polubienia
7
Ocena
5
P
PrintablesMaWoKo_3D_Druck

Kabel Abdeckung für Decke und Wand zum Anschrauben

Ich brauchte auf der Baustelle eine einfachen abdeckung für den Kabelauslass aus der decke somit ist dieses Model entstanden. 10 x 10 cm groß 3,5 cm hoch über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Pobrania
55
Polubienia
3
Ocena
0
P
PrintablesBlacky51

Drehbox für Schrauben, Muttern, Unterlagsscheiben usw.

PLA Füllung 20% Schichthöhe 0,2mm ohne Stützen, ohne Rand

Pobrania
54
Polubienia
13
Ocena
0
P

Traum Spardose

Traum Spardose. Die Buchstaben können einzeln und andersfarbig gedruckt werden und passen dann in die Aussparungen der Spar Dose. Größe: 10cm x 10cm x 10cm

Pobrania
54
Polubienia
4
Ocena
0
P
PrintablesKutte

Raupe

flexibles Modell einer Raupe, Print in Place, kein Support nötig Gedruckt auf Prusa Mk4 Schichthöhe: 0,2 Geschwindigkeit 100 % Infill: 15 % PLA (Prusament schwarz) habe es auch mit einem günstigen 3 farbigen Prusament gedruckt, ging war…

Pobrania
54
Polubienia
4
Ocena
0
P
Printablespatrick82

Radschrauben Indikator LK 5x112mm

Um zu erkennen ob die Radschrauben meines Wohnwagens sich gelockert haben bzw. gelockert wurden habe ich diese Indikatoren designed. Mit der Hilfe sieht man auf den ersten Blick ob mit den Radschrauben alles in Ordnung ist. Die…

Pobrania
52
Polubienia
9
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesMouky

Klopapieraufhänger toiletpaperholder

Aufhänger für eine Rolle Klopapier

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesSlastin

Skadis Halter für Modelco.fr Schraubendreherset / Skadis holder for Modelco.fr screwdriver set

Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…

Pobrania
39
Polubienia
10
Ocena
0
P
Printablesnerdnils

Spielzeugschraube; Toy Screw Bosch

Schraube passend zu einem Schraubenspielset von Bosch, Originalmuttern passen. Kopf ist etwas groß. Braucht Stützen wegen des großen Rings. Mutter lade ich hoch wenn ich sie gedruckt habe, ich lade keine ungeprüften Modelle hoch. Fits a…

Pobrania
36
Polubienia
0
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 4xPG9 Cable Gland/ PG36 Blindstopfen-Adapter auf 4xPG9-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Pobrania
36
Polubienia
9
Ocena
0
P
PrintablesFvones

Krytka na hydraulickou rychlospojku/Hydraulic quick coupling cover

doporučuji tisknout z pevnějších materialů jako je ABS, PETG, PC,…. podpěry nejsou třeba pokud se vetší díl tiskne pod úhlem (na skosenou plochu) ----------------- I recommend printing from stronger materials such as ABS, PETG, PC,….…

Pobrania
35
Polubienia
0
Ocena
0
P
PrintablesJCJ

MagPed Magnetpedal - Schraubensicherung

Schraubensicherung für MagPed Magnetpedale: https://www.magped.com/ Da ich nun zum wiederholten Male die Schrauben (Hülsenschraube) meiner MagPed Pedale verloren habe, habe ich eine Schraubensicherung konstruiert, um die Schraube vor dem…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesOliver

Lux Schraubzwinge / Soft clamps for a Lux screw clamp

Dies ist ein Ersatzteil für die Backen der Schraubzwinge 200 x 50 von Lux (Teilenr. 549 107), die mit den Jahren spröde werden und brechen. Dies ist keine 1:1-Kopie, sondern stellt nur die Funktion wieder her und ist etwas robuster…

Pobrania
33
Polubienia
3
Ocena
0
P

Braun mixer MQ9 holder

Wall holder for mixer Braun MQ9. The assembly holes were already pre-drilled in my wall, so I want to use it for this. But works good.

Pobrania
31
Polubienia
2
Ocena
0
P
Printablesitjak

M6 Rändelmutter Rändelschraube knob

ein einfache Rändelmutter zum einlegen einer M6 Mutter und einer Unterlegscheibe bei den Pausen des Drucks. Darauf achten das keine filamentrest die mutter oder die Unterlegscheibe erhöhen da es sonst zu kollision kommen kann…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesOBA

PG21 Blind Stuffing-Adapter to 1xPG7 Cable Gland/ PG21 Blindstopfen-Adapter auf 1xPG7-Kabelverschraubung

PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 3xPG9 Cable Gland/ PG36 Blindstopfen-Adapter auf 3xPG9-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesOBA

PG36 Blind Stuffing-Adapter to 4xPG7 Cable Gland/ PG36 Blindstopfen-Adapter auf 4xPG7-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 4xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 4xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG48 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
22
Polubienia
7
Ocena
0
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 6xPG9 Cable Gland/ PG48 Blindstopfen-Adapter auf 6xPG9-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Pobrania
22
Polubienia
5
Ocena
0
P
Printableseof

Test Pattern of Fuzzy Skin / Testmuster von rauen Wänden

4 different sets of parameters for Fuzzy Skin (thickness and Point distance). From zero to the default values.

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 5xPG7 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG7-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Pobrania
21
Polubienia
5
Ocena
0
P
PrintablesAlvomane

Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher

EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…

Pobrania
20
Polubienia
4
Ocena
5
P
PrintablesOBA

PG48 Blind Stuffing-Adapter to 7xPG7 Cable Gland/ PG48 Blindstopfen-Adapter auf 7xPG7-Kabelverschraubung

PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…

Pobrania
20
Polubienia
6
Ocena
0
P
PrintablesMatthew Schultz

Braun Travel Alarm Clock Case

I travel with a Braun (model BC08B) travel alarm clock as a backup to my phone. (How this came about is a different story.) It's a great little clock BUT the “light/snooze” button activates even if you just look at it. Seriously. Just…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesMaWoKo_3D_Druck

K+N Schraubenabdeckung M10

Schraubenabdeckung für eine M10

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesOBA

PG29 Blind Stuffing-Adapter to 1xPG7+1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG7+1xPG9-Kabelverschraubung

PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesChristian Maier

Schonbacken Schraubstock 125mm magnetisch

Magnete 10mm Durchmesser und 3mm Höhe.

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…

Pobrania
17
Polubienia
4
Ocena
0
P
PrintablesGymRBK

Stojánek na injekční stříkačky - model hydraulického lisu / Simple hydraulic press

Učební pomůcky obecně - aslespoň ve fyzice - nejsou zrovna levné, ale ceny za model hydraulického lisu považuji za výsměch. Schválně se podívejte sem: https://www.pierron.fr/presse-hydraulique-simple-hydropress.html, nebo sem:…

Pobrania
17
Polubienia
7
Ocena
0
P
PrintablesMichael Schramm

Objektschutz für Schraubzwinge

Nachdem ich ein Original verloren hatte, habe ich den Objektschutz für die Schraubzwinge nachgedruckt.

Pobrania
16
Polubienia
0
Ocena
5
P
Printablessteveprusa1502

Bafang Brake sensor mount for Shimano Deore Hydraulic brakes

Mounting plate for Bafang hydraulic brake sensor modules to Shimano Deore brakes. Screws onto the handlebar mounting bolt so maintains its position better than cable ties alone to the irregular shaped brake reservoir/cylinder body. Use a…

Pobrania
16
Polubienia
2
Ocena
0
P
Printables3dprintcept

Vinyl Halterung ohne Schraube und Dübel

Objekt muss im Slicer getrennt werden. (Objekt anklicken> rechtsklick>trennen> zu Objekten) Anschließend mit Stützstruktur drucken. Diese kann nach dem Druck einfach entfernt werden. Darauf achten den Bajonettverschluss von Rückstenden zu…

Pobrania
16
Polubienia
8
Ocena
0
P
Printablesmbzirsch

Grohe Brausehalter Ersatzteil Replica

Ersatzteil für Duschkopfhalter von Grohe.

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesAlesbeles

Engelbert-strauss / Dewalt

Klip pro přechodovou desku z kufru Engelbert-strauss na kufry Dewalt. Není stejná jako klip na samotném kufru Dewalt!

Pobrania
13
Polubienia
1
Ocena
0
P
Printablestom

Tablettenbox (Kugel Ø25mm) mit Innenraum Ø15 x 15 mm/ Tablet box (ball Ø25mm) with interior Ø15 x 15 mm

Die Tablettenbox bietet Platz für mehrere Tabletten. Dank ihrer abgerundeten Form kann sie ohne zu stören in der Hosentasche getragen werden. Die Gewindeverbindung sorgt für einen guten Verschluss und ist mit nur einer Umdrehung zu…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesRene

Schraubzwinge

Diese Schraubzwinge ist für den Modellbau geeignet, Sie ist

Pobrania
12
Polubienia
4
Ocena
0
P
PrintablesRene

Schraubzwinge 120mm

Es steht zum Download eine Schraubzwinge, sollte nicht Fehlen im Haushalt. Breite 15mm, Tiefe 43mm, Länge 120mm

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesWhiteDragon

Aeon ACZ ULTRA FT Weihrauch HW100 Butt Hook - 0.4 dimples

i didn't like the original butt pad “wings” so i adapted/designed my own.

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesLOOTY

Schraubbarer Abstandhalter für Tischfuß

For Hex Bolt M8. No glue required. Für Seckskantschraube M8. Kein Kleber notwendig.

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesPeopleware

Pelletwächter Lite (DPMA 20 2026 000 659) Kontrolle über Pellet Verbrauch und Füllstand der Ascheschublade

>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesChrisDoe_85

Schraubzwingenkappe

Schraubzwingenkappe veränderbar und modellkompatibel. Diese Kappe ist auf ein Maß des Zwingentellers von 20,1 mm ausgelegt. Sie besitzt eine starke Wandung, welche allerdings noch reduziert werden kann.

Pobrania
4
Polubienia
0
Ocena
5
P
Printablestom

Schraubbarer Trichter für schmale Teefilter/ Screw-on funnel for narrow tea filters

Dieser schraubbare Trichter wurde entwickelt, um das Befüllen des Teefilters der Naqula‑Thermoskanne mit losem Tee deutlich zu erleichtern. Der originale Filter besitzt einen Durchmesser von rund 30 mm, was das Einfüllen oft mühsam macht.…

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesChileo

Schraubenschlüsselhalter / Open-end wrench holder

GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…

Pobrania
4710
Polubienia
454
Ocena
4,93
P
PrintablesAndrás Bognár

Minimalist Oral-B Braun Electric Toothbrush Wall Mount

Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…

Pobrania
3927
Polubienia
673
Ocena
4,93
P
Printablesvzhny

Root Board Game 3D Buildings and Tokens (Every Expansion Including Marauder + Hirelings, Multicolor)

Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…

Pobrania
3534
Polubienia
467
Ocena
5

Spooler Abwickler Filament Akkuschrauber Spule

Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…

Pobrania
2903
Polubienia
144
Ocena
4,9
P
PrintablesIcarus3D

Krauser Knife from Resident Evil 4

The announcement of the Resident Evil 4 remake by Capcom made me want to model Krauser's famous knife. I was inspired by several illustrations and shots of the knife during the knife duel sequence between Krauser and Leon. The blade is…

Pobrania
2042
Polubienia
220
Ocena
4,67
P
PrintablesPeter_Sörgel

Ersatzbrause für Gießkanne

Nach einigen Jahren im Einsatz ging die Brause meiner Gießkanne leider kaputt. Immer nur mit dickem Wasserstrahl gießen macht besonders bei jungen Pflanzen keinen Sinn. Die gedruckte Brause lässt nun wieder sanftes regen ähnliches Gießen…

Pobrania
1806
Polubienia
139
Ocena
4,93
P
PrintablesBeo666

Toilettenschild Türschild Toilette Frau Mann v2

Du möchtest die Gästetoilette unverständlich kennzeichnen? Dann bist du hier genau richtig. Hier ist die Version 2 von meinem Toilettenschild. Das Schild ist zweiteilig, es wird mit doppelseitigem Klebeband besfetigt, ich kann…

Pobrania
1603
Polubienia
401
Ocena
5
P
Printablesvandragon_de

Frauenkirche Dresden

The Frauenkirche in Dresden is an Evangelical Lutheran church of the Baroque and the defining monumental building of Dresden's new market. It is regarded as a magnificent testimony to Protestant sacred architecture, has one of the largest…

Pobrania
1597
Polubienia
145
Ocena
5
P
Printables3D KIMBA

Thread Gauge Tester: A Handy Tool for Measuring BSPP Hydraulic Pipe Threads

Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…

Pobrania
1561
Polubienia
345
Ocena
5
P
PrintablesLindArt3D

Propeller (Schiffsschraube)

Propeller für Modellbau

Pobrania
1466
Polubienia
61
Ocena
5
P
PrintablesSigismond0

Root - Board Game Organizer (up to Marauders)

This is an update to my previous Root game organizer . The original version held the base game and Riverfolk expansion, and this new version aims to hold everything. For the sake of being thorough, you can expect to organize the…

Pobrania
1464
Polubienia
233
Ocena
4,33
P
PrintablesDJ

oil liquid fluid funnel with screw (thread) for cans - Trichter mit Verschraubung für Flaschen, Kanister Öl Flüssigkeiten

I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…

Pobrania
1443
Polubienia
322
Ocena
5
P
PrintablesRoland Goller

Vorzelt - Abspannleiter - Tellerkopfschraube - Sturmsicherung - Tent

Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…

Pobrania
1328
Polubienia
80
Ocena
5