3259 modeli
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
Ide o obraz na stenu alebo dekoráciu na stôl ktorý aj svieti a je vhodný ako vianočný darček. Je to niečo, čo si môže užiť každý! Na dokončenie a svietenie obrazu / dekorácie budete potrebovať elektrické osvetlenie na baterky. Pred…
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
EN - English A set of stamps designed for ceramic production. These stamps are created with an emphasis on easy of use and flexibility. A magnet is integrated behind the 0.2 mm layer of both parts of the stamps, allowing the printing part…
Nové, kulaté razítko NEW! : https://www.printables.com/model/1286346-samobarvici-razitko-selfinking-stamp Razítko je vytvořené z pěti snadno tisknutelných dílů s minimem podpěr (doporučené podpěry a orientace při tisku jsou vidět ve…
Cubo utilizzato per la precisione dimensionale della stampante utile per calcolare gli step per mm e altri parametri Cubo stampato con paramtri di default di prusa slicer per prusa mini+ e filamento della geeetech Per una maggior…
A simple box with plenty of storage for used single- or double-edge razor blades. Instructions Print the One piece as is with 0.15mm layer height for smooth curves. No supports needed. The object includes support structures to reduce…
🇧🇷 Bem-vindo a Brasil! Welcome to Brazil! This model was sculpted by 3D artist Luana Ferreira, no AI. The monumental Christ the Redeemer statue in Rio de Janeiro is one of the most recognizable landmarks in the whole world, becoming a…
Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.
Minimalistic design suitable for precision workshop projects.
This is a razor stand for the Henson Shaving AL13 safety razor. Includes a torque center that makes blades changes safer. Instead of holding on to the razor head with wet fingers, simple put the head of the razor in the torque center and…
Optimized for 0.4mm nozzle. Print with PLA or PETG. Add brim if falls off the bed.
New version! With the widened handle end slot in version 2, the Razor Holder should now work for most Amazon Basics, BIC, Dollar Shave Club, Gillette, Harry's, Schick, and Skintimate men's or women's cartridge or disposable razors . Along…
Bandeja apoyabrazos MG ZS Hybrid+. Atención solo sirve para el modelo Hybrid+ 2024 - 2025. MG ZS Hybrid+ armrest tray.
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
This is a replacement for the feather clips for mechanical keyboards. It is modelled after the ones found in the Razer Blackwidow X Chroma but it should fit most standard keycaps. Print Settings Printer Brand: Prusa Printer: Mini+…
See our other models : Concept & Inspiration The Diamond Heart Earrings are inspired by the brilliance of cut diamonds combined with the timeless symbolism of the heart. This design merges sharp geometric precision with a soft emotional…
Letter K: set of seven, two colours, 20 cm
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Please click ❤LIKE❤ if you appreciate my work 😊 This funny 3D carrot is a perfect little accessory for your fridge or magnetic board. With its cheerful face, it’s guaranteed to make you smile every time you reach for food. Model details:…
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Letter R: set of ten, two colours, 20 cm
Letter H: set of six, two colours, 20 cm
Letter J: set of five, two colours, 20 cm
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Sign: WARNING: CRAZY CHICKENS - 20 cm, three colours
Letter H: set of eight, two colours, 20 cm two colours
El brazo de servo de 9G es una pieza a medida para completar medidas diferentes a los suministrados en el kit del servo o sustitución de la misma medida. El usuario puede modificarla en otras a su conveniencia. Diseño original está…
Letter P: set of eleven, two colours, 20 cm
grill or wall art fancover 140 mm fancover 120 mm
I decided to create a wall mounted dock to charge my wireless Razer Nari headset. It has 2 channels to use command strips for the wall. I used a magnetic USB cable charger from amazon (link below) for the “dock” feature. The back has a…
I printed with a .2mm nozzle for best results
Español: El diseño de esta pieza está pensado para poder dar un soporte adicional en los antebrazos a aquellas personas que por diferentes motivos no tengan la posibilidad de mantenerlos por sus propios medios cuando trabajan sobre una…
Not yet tested, but I figure bridges beat shallow slopes.
The Razer Zephyr is an awesome mask, but the filter covers are attached by magnets and are prone to falling off. To fix this issue I created this grill guard which bolts on to the air inlet using an M3x20 bolt and square nut. This design…
WARNING - 3 PAUSES DURING PRINT - ONLY FOR CRAZY PEOPLE No glue needed ! Must to have ! Only in 0.2 layer or 0,1 if you are strongly crazy. Print first all 6 colors before printing the box and be carefull when you remove colors of the…
Úložný systém IKEA TROFAST vyrobený z mořené borovice neobsahuje zadní dorazy pro výsuvné boxy. Vytvořil jsem tuto jednoduchou zarážku, kterou stačí zezadu nasunout na rám a přišroubovat vruty tloušťky 2mm. Sestavu nemám zavěšenou na zdi,…
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 15% infill.
PLA, 0.15 - 0.2mm layers, no supports 1h37m
Vykrajovátko na těsto ve tvaru skautské lilie s volitelným razítkem ve tvaru chodského psa.
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
This design is suitable for iPhone models 6S, 7, 8, SE 2nd generation and SE 3rd generation as they share a similar design and dimensions of their cases. All butons and cameras are accessable. For a perfect fit you should use a phone case…
Supports razor blades for Leon.Reijnders model. Uses 3 M5 screws 3mm ideal length. Blades secured with M5 screws, halved
Razer Seiren Mini V3 Under-Desk/Shelf Mount I designed this mount to free up desk space for my Razer Seiren Mini V3 microphone. Since I’ve extended the microphone stem, the stand was taking up too much room on my desk, so I created a…
This stand can hold 5 classic disposable razors. Foam spray fits In the middle. Print the large Base part in vase mode, the connector ring and the crown can be printed normally without support. The connector ring and the crown has tight…
Get inspired for own designs, or just print for convenience. This box features brand watermark and 0.75mm sidewalls. No Ultimaker or Prusa owner will want to promote the CZ-300 being half the price or less of their printer, so this item…
doporučuji nastavení trisky: 0,10mm detail nastavení filamentu: doporučuji PETG nebo PLA nebo pokud mate jedlotku immu2s tak ji použijte nebudete litovat (je to remix! https://www.prusaprinters.org/cs/prints/41200-prusa-mk3s-lcd-cover )
After dropping the razor in the shower again and again I was tired of this and made this very simple but effective holder. Printed fast and does its job. ----------------------------------- Nachdem ich mir der Rasierer gefühlt das…
Soporte o colgador de sillas plegables para jardin o terraza, caben 4 sillas de ese estilo. Relleno 35% Relleno panel de abeja. Impreso en PETG. Necesita soporte solo en la punta que evita que deslicen las sillas.
This box is made with minimal material for shortest print time. My prototype came out a bit warped and at 15 hours, but I think the print settings for the outer shell could be tuned a bit to speed it up. Of course with watermark for…
I saw some other frames with the same idea but they all had 2 issues: (1) they covered up the State and lettering at the bottom of the license, and (2) they didn't enclose the license plate edges. This design provides more sturdy…
Let everyone know what they're getting into (or trying to get away from!) with this amazing "Warning: Crazy People Live Here" door sign. Fits on a front door, in a bedroom, or garage—there's no escape from this door sign as it promotes…
cz 3d razítko ryby en 3d stamp fish
Jedná sa o držiak bočného dorazu vrchnej frézy Parkside. Tento diel je špecificky navrhnutý pre použitie k vrchnej fréze Parkside POF 1200 C2, ale myslím si, že bude pasovať aj na nové verzie tejto vrchnej frézky. Tento držiak bočného…
Tactile image of the climate in the northeast region of Brazil. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Studenti si vyzkouší sestavit a naprogramovat vozítko a jeho senzory.
Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…
Žáci navrhnou vlastní ornamenty, které převedou do 3D podoby, vymodelují a vytisknou razítko, kterým mohou opakovaně zdobit keramické výtvory.
Žáci navrhnou a vymodelují v programu Tinkercad jednoduché válcové raznice k použití v keramické dílně.
Krytka na šestihranný šroub M6 - pro klíč 10 mm. V tomto případě byl použit šroub M6x12 mm. Kvalita tisku 0,20 mm STRUCTURAL, výplň 100%, bez podpěr a límce. Materiál PETG
When needing to make a blade change while my hands are slippery, I often have to use a set of pliers to hold the blade so it doesn't slip. This lets me have blades ready to go on my workbench and just one handed click into them.
NEW UPDATE, Symmetrical legs, only need to print the same leg twice instead of worrying about left and right versions of legs. not compatible with previous versions. previous version files in Archive Design Files Now Available for…
Mounted using double sided tape. Customize to your liking using the STEP file. Suggestions are also possible :)
Mini brazo robótico de 4 grados de libertad, implementado con servos MG90, el cual cuenta con una base como primer grado de libertad, un hombro como segundo grado de libertad, un codo como tercer grado de libertad y por ultimo una pequeña…
📝Description This is a simple and functional 3D-printed razor holder designed to fit most popular razor types. If needed, it can be easily scaled in your slicer to match your specific razor. Fast and easy to print — only about 15 minutes…
Functional hook for razors, sponges or even keys. Easy to attach with double-sided tape. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
Remixed from the version uploaded by @ericsnis Follow Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides. Images show it printed with: 0.2mm layer…
Para este robot se utilizo como principal plataforma arduino UNO, el cual calza milimetricamente en la caja, este se diseño para esconder todos los cables y tener una mejor imagen. Todo el material ocupado esta en el archivo ENSAMBLE , al…
This retractable razor blade scraper is an improvement over one I used to have for scraping burnt gunk off a ceramic stove top. Features: No removable cap to get lost. Snaps into three positions: load/unload, safe storage, blade exposed.…
PLA, 0.2mm layers, printed as shown in photos, 1hr 20 mins
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Ferrari F40 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
Cubo X Y Z per calibrazione della stampante , questo è un semplice modello 3d che può essere stampato da tutti i tipi di stampante da quelle a filamenti a quelle a resina. è un modello perfetto per vedere le capacità della nostra…
This is a handle for plastic razor blades used for scraping labels or other gunk. I wanted a couple extra handles since the package supplied two. The blades should just snap into the holder. Please don't use for actual razor blades, it…
I redesigned the scraper so that a Voron-sized M3 heat-set insert fits correctly. The hole diameter is 4.7 mm in the CAD model. The new design is extremely rigid, and the blade can be replaced as often as needed without degrading the…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Supra MK4 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della Supra…
Note: as some of the reviews have pointed out, this design looks better than it performs. If you want a problem-free design then I'd advise you to look elsewhere ;) This is a simple to print and lightweight razor blade scraper, which can…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
Montaje: x4 Servo SG90 (tornillos incluidos para sujetar los servos) Estoy trabajando en la lista de componentes. Impresión: Densidad de relleno: 15% - 30% Altura de capa: 0.12mm - 0.20mm Material: PLA
Razor Crest - Star Wars Ship Model of a spaceship from the Star Wars movie saga. Modeled at the request of my first supporter and club member. Also for Star Wars fans! I don't know how accurate the model is, I modeled it based on pictures…
Update : 28-04-'24: Tighter version of the blade holder added. Remix of the Scraperite handle by Genghis. I like Genghis' design, nicely done with the curved shape and knurling; but the part for holding the blade didn't work very well for…
Single Piece - No lid to accidentally come open Secure - internal geometry makes it nearly impossible for blades to fall back out. Space saving - 45x45mm footprint Tall - Holds larger blades like “window scraping” blades IMPORTANT Print…
A holder designed for Stanley razor blades to help remove 3D prints from the bed. You may also find use in removing decals, cleaning flat glass, etc. There are recesses for the blade to sit and to insert M3 nuts on the back side. Requires…
🇧🇷 Bem-vindos a Brasil! Welcome to Brazil! Check out the 2025, realistic version of this model . This is one of our very first models, created in 2014 by MiniWorld3D founder & lead 3D artist Dany Sánchez . It is made with considerations…
Descrizione Porta stile e passione automobilistica nella tua casa con questa elegante wall art della Porsche 911 GT3 , realizzata in stampa 3D con PLA nero di alta qualità . Il design minimal e moderno raffigura il frontale iconico della…
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
Simple safety razor cover with touch of compliant mechanism.
Very lightweight mouse mod for Razer Viper v2 Pro. This model was inspired by Optimum's Zeromouse.
Razor holder in bathroom. Fastening on 3M tape, before applying the sticker, degrease the surface with alcohol. I print PLA 0.2, it will also be fine from PETG
Razor holder for the shower. Mounts to a stainless steel Shampoo holder with max 4mm strong struts. -------------------------------------------------------------------------------- Rasiererhalterung für die Dusche. Wird an einem…
Stand for Henson Razor requires no supports
Perfectos llaveros de corazones excelentes para San Valentín.
This is a double-edge (DE) safety razor that works with standard blades. If you've ever wanted to try shaving with a DE razor before spending the cash on a nice one, you can give this a shot for less than $0.50 of plastic! I bought a…
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
The agent Raze (from the game valorant) boombot. Supports recomended This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project.…
A 3D printable blade disposal bin, suitable for any razor blades up to the size of a double edge safety razor . It is incredibly irresponsible to throw razors, or blades of any kind for that matter, into the normal bin, and therefore it…
This is a razor holder that I designed for my wife so that her razor would have a home in the shower, and a spot to dry off after its use. Important: I printed it in the orientation shown in the third picture. No supports were required.…
Print on its side with organic supports. It took me ~3 hours with a 0.6 nozzle. I would recommend throwing a clear coat on it, due to the typical locations of such things.
Simple Razor Stand for Gillette Fusion Razor. This is remix from Thingiverse model: https://www.thingiverse.com/thing:4654647 No support needed. Material recomended: PET-G ( PLA, ABS, ASA) Min. layer hight: 0,15
