50 modeli
This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena jednego wariantu
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
To download the box of my idea and project for the laboratory power supply riden rd6012, the box fits a dedicated 800W power supply NVVV, the top of the housing is folded out for quick access to the power supply. Box in two options,…
Riden power supply RD60xx panel case to keep your panel on your desk and hide the actual supply under your desk. Print best using PETG as PLA might get soft when it heats up. It's best to print it facing front of the panel (open wall)…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…
The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something according to yourself, I have added the .step files.
You have to cut the hole for the power supply yourself in the desired place. The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something…
A quick simple desk enclosure for the well known RIDEN RD6006/60xx range of DC-DC power supply control units. This is for when you have a separate AC-DC supply and only want the handy and small RIDEN DC-DC unit on you lab bench taking up…
Riden RD6018 Basic Model
This is a simple, functional, angled case for the Riden RD6006 buck converter. Designed to take a 10mm power jack in the back. Vented for airflow. M3 5mm screws hold the back in place (example in photo 4 available from Amazon) Main body…
A semi accurate model of the popular RD6006 Power Supply. Use this to help model your own case like this one Includes STL, STEP Link to Fusion 360 file: https://a360.co/2QxLvUf Category: Electronics
Remix with case being 6mm deeper to accommodate the new P(W) series. Printed with back on build plate with support everywhere
This is a case for the RIDEN RD6006 variable voltage regulator. And a WX-DC2416 Power supply 36V DC 5A https://cutt.ly/69tJ8Ij The feet must be fixed with glue.
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
Box for mounted power supply RD6006, RD6012, RD6018 (you have to drill the power supply mounting holes yourself) because not all power supply models have the same fixing holes. With HW-585 PWM Module Board :…
A simple desk enclosure for the well known RIDEN RD60xx range of DC-DC power supply controllers AND a Meanwell LRS-100 power supply Google the power receptable https://www.google.com/search?q=IEC+320+C14+male+panel+mount Google Riden…
Due to limited space on my table I made a housing for my power supply that I can put on the floor. I added a step file if you want to adjust lower part to your small part. Update: I moved the power supply to the left to make more space on…
This is a vertical case for RuiDeng RD6006 lab bench power supply. It is designed to fit a power supply unit that comes with RD6006 from official AliExpress store (216 x 114 x 50 mm). You will need some other hardware, which you can find…
I wanted to have a case for my RD6006 power supply that included a DC barrel connector. So I remixed the excellent design from Alberto Nidasio to add said connector. As I had it opened in Fusion 360, I also modified it a bit to reduce the…
A case for the Riden RD6006. Designed around this model https://www.thingiverse.com/thing:4073986 Features: Modular front plate so you can optionally have front facing outputs for USB, XT60, Banana plugs or whatever you like. Modular back…
^ Title! Category: Electronics
I wanted a super small case for my RD6018 power supply that had a built in step-up converter but also allowed for direct input. This way i can plug a battery into the power supply and use it remotely as well. The components i used: The…
My view of case for RD6006 with an angle (25 degrees). Backside as hexagons for airflow and modular base for adding connectors for power. To ensure that the case is secured with the device, there is there is a hole for screw and nut.…
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
Riden RD6012 Power Supply Under Desk Mount Designed for 3.0x12mm screws attached to wooden shelf Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament PLA Category:…
A small enclosure for a PoE injector and QC 3.0 charger designed to sit on top of the RD6012 PSU ‘kit’ sold all over aliexpress and banggood. PoE injector is nice to have from time to time and QC3.0 is useful doe charging devices and…
Desktop case for the Riden RD series power supplies. I have the 6018 but believe the series (6006, 6012, 6018, 6024, 6030) are all the same dimensions. The display is angled back to sit at 25 degrees from vertical. Vents for air flow are…
TS80 Soldering adapter for power supply case with USB QC3.0 output: https://www.thingiverse.com/thing:4521874 Very often when I need a power supply in my projects is also involves soldering, therefore, I have incorporated a QC 3.0 USB…
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different. After printing it for the first time, the top broke of like the original…
This piece can be fitted on any Riden 60XX powersupply to avoid excessive play when mountin it into the sheet metal case. Without, it wiggles around when unplugging cables or pulling(pushing on the knob. With the spacer it sits nice and…
RIDEN RD60xx Desktop headunit enclosure, includes XT60 panel-mount for DC power input. Remixed to fit the RD6030 which has larger inductor coils on the back. No special printing requirements, I used Polymaker ASA with 0.4mm nozzle.…
20 degree base to use with https://www.thingiverse.com/thing:4552134 Category: Electronics
Simple small case for RIDEN/JOY-IT RD6006 or RD6012 Power Supply. Print instruction: To print position its back down to the printer bed.
Box + holder for power supply Riden RD6006 to mount it to shelf - still possible to move out. Holdes for tempreature sensor with spool in bottom Functional draft version DC socket ON/ OFF button
RIDEN PSU RD6006 - Case wall mount including additional PSU for with 24&12V DC Note case is hold to the wall mount via 9 X round magnets 10mm X 2mm Note the RD6006 PSU design got from Grabcad…
2.5U 19 inch rack front panel mount for RD6006 Power Supply (Joy-IT/Riden) These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Stand for the RD6006B per supply frontend: Print settings: Nozzle 0.4 Layer 0.2 Material: PETG (others are working too) Slicer Support Setting: Auto generate support, organic
There is enough space inside to accommodate 1–2 power supply units.
Remix of the model which provides a minimal box to hold the headunit on the desktop, with no power supply integrated. This mod adds a XT60 connector on the side. It also provides a Fusion360 file so you can move the power, modify it for…
This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need: 1x Riden RD6006 DC Power Supply 1x 48V 100W LED Power Supply 1x C13 Socket (or any other with…
I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…
DIY Case for RIDEN RD6006 with power supply. Sliced with simplify 3D. Manual supports in overhang locations. Print with opening for RD6006 on bed. designed to be printed split in half and assembled. Feel Free to customise have incuded…
Vypínač napájecího zdroje RIDEN RD6018 má po montáži vůli. Pro vymezení vůle jsem si nakreslil a vytisknul podložku. The main Switch of RIDEN RD6018 PSU has clearance after assembly. To define the play, I designed and printed the spacer.
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
There is enough space inside to accommodate 1–2 power supply units.
