Wyniki wyszukiwania: rein

Sortowanie

2555 modeli

P
PrintablesSeppo

Reindeer Christmas Card Snap-Together Reindeer

This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…

Pobrania
13 706
Polubienia
3033
Ocena
4,88
P
PrintablesDeltaprints

Cute minimalist Christmas reindeer decoration

This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…

Pobrania
13 665
Polubienia
2506
Ocena
4,99
P
PrintablesDeltaprints

Minimalist (Christmas) low poly reindeer

🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…

Pobrania
13 073
Polubienia
2252
Ocena
4,73
P
PrintablesAWT Works

Modular Filament Storage System - V1 (Tested & Reinforced Design)

IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…

Pobrania
9197
Polubienia
3085
Ocena
4,89
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Pobrania
7243
Polubienia
1619
Ocena
4,96
P
Printablesevax design

Cookie Cutters Reindeer

It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Pobrania
4974
Polubienia
1118
Ocena
4,79
P
Printables3D Fluffies

Knitted Reindeer

CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!

Pobrania
4844
Polubienia
1139
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Pobrania
4453
Polubienia
838
Ocena
5
P
PrintablesMolodos

Ferrero Rocher Reindeer

A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…

Pobrania
4062
Polubienia
1217
Ocena
4,98
P
PrintablesKaminoKGY

Reinforced replacement for broken kitchen hinge

Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰

Pobrania
3897
Polubienia
2099
Ocena
5
P
PrintablesE3D

Rupert the Reindeer ~ A 3D Printer stress test

MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…

Pobrania
3191
Polubienia
460
Ocena
4,94
P
Printablesvexanix

Reinforced Articulated Shark

The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…

Pobrania
3041
Polubienia
415
Ocena
4,77
P
PrintablesJADV

IKEA LACK reinforcement

Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…

Pobrania
2938
Polubienia
991
Ocena
4,97
P
Printableskang159

Reinforced Articulated Shark w/ Keyring

I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…

Pobrania
2414
Polubienia
317
Ocena
5
P
PrintablesTms Lht

Heavy-Duty Wall Hook – Reinforced 3D Printable Storage Hanger

A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…

Pobrania
2387
Polubienia
607
Ocena
4,38
P
Printablesjet_maker

Deer Head low poly / Hirsch Kopf / reindeer head / Rentier Kopf

This is my version of a reindeer head. It seems like there is a nearly similar version, but this is made by a special computerprogramm so not copied. It was made with a free vector picture. Enjoy printing. View my other models too.

Pobrania
2321
Polubienia
567
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 62 - Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Pobrania
2296
Polubienia
490
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 57 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Pobrania
2280
Polubienia
489
Ocena
4,81
P
Printables3DesignsCH

Ikea Lack Table Reinforcement

The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking. My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for…

Pobrania
2233
Polubienia
493
Ocena
4,92
P
PrintablesBaeoniq

Reinforced Wall Hook - V2

This updated version of my original 'Wallhook' makes it even stronger than before, and featuring rounded edges that provide a cleaner look while reducing stress concentration points in the plastic. I have integrated two dedicated screw…

Pobrania
2086
Polubienia
911
Ocena
5
P
PrintablesPrintThatBoii

Christmas tree reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Pobrania
1897
Polubienia
371
Ocena
4,87
P
PrintablesFilcuk

Best Spoon Rest Ever - Reinforced [remix]

A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…

Pobrania
1871
Polubienia
548
Ocena
5
P
Printablesedgett

Christmas Reindeer - Prancer

This remix improves on a few areas that made printing the original design very difficult. feet have been made flat on the bottom and even, so deer stands in a more stable manner custom supports have been made more substantial to provide…

Pobrania
1743
Polubienia
355
Ocena
5
P
PrintablesEqubuxu

Reinforced Economical Gridfinity Bins - No vase mode (w/ half grid)

Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…

Pobrania
1675
Polubienia
303
Ocena
4,96
P

MINI REINDEER / CHRISTMAS MINI FIGURE / FIGURE / FIGURINE / TABLETOP DECOR / LITTLE GIFT

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI REINDEER Say hello to…

Pobrania
1608
Polubienia
284
Ocena
5
P
PrintablesStenly_G

Rudolph the Red-Nosed Reindeer - Christmas

Rudolph 🦌, the red-nosed reindeer, shines bright as the hero of Christmas Eve! With his glowing nose and cheerful spirit, he leads Santa's sleigh and spreads holiday magic everywhere. 🎄✨

Pobrania
1582
Polubienia
365
Ocena
4,75
P
PrintablesMehTechArt

Heavy-Duty Reinforced Corner Brackets

Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…

Pobrania
1566
Polubienia
805
Ocena
5
P
PrintablesMaxT

Christmas Door Trim Corner 27 - Santa Sleigh and Reindeer and Snowflake (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Pobrania
1566
Polubienia
346
Ocena
5
P
PrintablesC47_3d

Reindeer Phone Stand

Check out more models from Phone collection https://www.printables.com/@C47_3d/collections/793008 and Xmas collection https://www.printables.com/@C47_3d/collections/155488 --- If you want to sell prints of this models you can buy a…

Pobrania
1542
Polubienia
471
Ocena
5

Ikea LACK Reinforcement

No support needed. Use 4x20 mm wood screws without predrilling.

Pobrania
1531
Polubienia
325
Ocena
5

Reinforced Creality K1 Side Spool Holder with Filament Guide - 2 Piece Print

Fellow Creality K1 Owners, Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to…

Pobrania
1524
Polubienia
190
Ocena
4,88
P
PrintablesMarco Di Fiore

Reindeer Voronoi

I printed this model with a white PLA, 0.4 nozzle, 0.2 line width and organic supports on. I added a cylinder for each leg to improve the first layer adesion and help the model to stand. My first print was downscaled to a 10cm model, and…

Pobrania
1520
Polubienia
366
Ocena
4
P
PrintablesMaxT

Christmas Door Trim Corner 23 - Santa Sleigh and Reindeer and Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Pobrania
1504
Polubienia
328
Ocena
5
P
Printablesmoodyswing

Reinforced Side Spool Holder - Ender 3 V3 SE/KE

Reinforced version of side spool holder with option to attach side bin

Pobrania
1425
Polubienia
165
Ocena
4,91
P
PrintablesFreshAndClean

Holiday Reindeer Decorations

Reindeer are a staple of the holiday season. These models are unique and work well in any scenario. You can hang them on a tree, or just place them on a table. The base model used for this design is a composite of multiple others I had…

Pobrania
1341
Polubienia
276
Ocena
5
P
Printablesp3rr1ff3ry

Reindeer Antlers Headband

Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…

Pobrania
1304
Polubienia
221
Ocena
5
P
Printableswrkyle

Honeycomb Bookend (reinforced)

A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…

Pobrania
1273
Polubienia
187
Ocena
4,88
P
Printablesf4r0kh

Flipper Zero case (reinforced)

I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…

Pobrania
1254
Polubienia
167
Ocena
4,91
P
PrintablesJADV

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Pobrania
1253
Polubienia
236
Ocena
4,97

NASA-Style Hexagonal Flexible Mesh/Fabric (Reinforced) l Full design process included (Fusion 360)

🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…

Pobrania
1220
Polubienia
138
Ocena
4,89
P
PrintablesAUGU5TO

Modular Gravity Tool Holder – Adjustable, Reinforced & T-Nut Mountable (Remix)

Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…

Pobrania
1208
Polubienia
1006
Ocena
4,75
P
PrintablesDuckMeat

Bambu X1/P1S Chamber LED Riser Upgrade (Reinforced)

Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…

Pobrania
1198
Polubienia
255
Ocena
4,95
P

19-inch Reinforced Modular Rack Mount Blanks

A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…

Pobrania
1196
Polubienia
111
Ocena
5
P
PrintablesTaylor

QUICK-CLIP : Heavy-Duty Reinforced Buckles

NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…

Pobrania
1179
Polubienia
215
Ocena
4,88
P
PrintablesOshhe Yt

Universal Reinforced 90° Corner Bracket

⚙ Print Settings & Advice: * Orientation: Position the model flat on the bed to ensure the screw holes and reinforcing rib print perfectly without any support material. * Perimeters (Walls): Min. 4 perimeters for extra rigidity. *…

Pobrania
1152
Polubienia
579
Ocena
0
P
PrintablesNozzleSting

45° Winkel mit Verstärkungsrippen für Regale <<>> 45° angle with reinforcing ribs for shelves

(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…

Pobrania
1146
Polubienia
389
Ocena
5
P
PrintablesWusaweki

Coffee Scoop reinforced

The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.

Pobrania
1138
Polubienia
119
Ocena
4,87
P
Printablestammets

Reindeer napkin holder

Reindeer napkin holder for Christmas. Or why not every other time as well.

Pobrania
1088
Polubienia
315
Ocena
4,81
P
Printablesthall72

Lego Compatible (10928.dat) Technic Gear 8 Tooth Reinforced

This model is compatible with the lego system.

Pobrania
1082
Polubienia
67
Ocena
5
P
PrintablesDarazsweb

IKEA Lack enclosure reinforcement supports

The IKEA Lack table is used by many makers to build a 3D printer enclosure. But the table is lacking stability, the legs are not connected to the table tightly enough. By the time the connecting screw gets even looser in the soft (pressed…

Pobrania
1049
Polubienia
196
Ocena
4,83
P
Printablesastrophage

Reinforced Parametric Zip Toggle

This remix thickens the loop to reduce the change of breakage via wear and tear.

Pobrania
1025
Polubienia
169
Ocena
4,86
P
Printablesttr0n

Bird Water feeder (reinforced)

A remix of Hajo's most excellent bird water feeder. Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works! Unfortunately, I over tightened the PET bottle and sheared the…

Pobrania
1004
Polubienia
115
Ocena
4,91
P
PrintablesTheMasonX

Happy Reinforced Articulated Shark

Liked the reinforced joints that vexanix added, just wanted the other head(s) from the sharks Category: Toys & Games

Pobrania
1002
Polubienia
113
Ocena
5
P
PrintablesvmLOGIC

Bundesliga - alle 18 Vereinswappen 2023/24

English: This set includes the emblems of all the clubs in the 2023/24 season of the German Football League (Bundesliga). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…

Pobrania
996
Polubienia
42
Ocena
5

Winter Reindeer - Christmas Holiday Ornaments - 4 Knitted Styles

According to my girlfriend, this is the cutest model I've made so far. This is my Reindeer Christmas Holiday Ornaments ! Check out my page for them as just decorations, if you don't need any more ornaments! I printed one myself, and the…

Pobrania
993
Polubienia
178
Ocena
5
P
PrintablesKinematic Digit

5015 Parts Fan Mount for Sprite Extruder (Reindeer Shroud)

My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…

Pobrania
987
Polubienia
157
Ocena
4,89
P
Printablesthall72

Lego Compatible (3941.dat) Brick 2 x 2 Round without Reinforcement

This model is compatible with the lego system.

Pobrania
986
Polubienia
45
Ocena
5
P
Printablesrstastny

Reindeer christmas cookie cutter

Reindeer christmas cookie cutter

Pobrania
982
Polubienia
114
Ocena
4,86
P
PrintablesIvanovic

Succubus Reina Infernal - Demon Queen Pose Dominante

¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…

Pobrania
978
Polubienia
151
Ocena
5
P
Printablesthall72

Lego Compatible (94925.dat) Technic Gear 16 Tooth Reinforced

This model is compatible with the lego system.

Pobrania
970
Polubienia
55
Ocena
5
P
Printables3D MAGIC

Knitted Christmas Reindeer

A little deer with a cozy Christmas feel! 🦌🎄 With its big eyes, tiny antlers, and knitted texture, this little deer makes a sweet addition to your holiday decorations. The raised cable-knit pattern gives it the look of a winter sweater,…

Pobrania
967
Polubienia
207
Ocena
5
P
PrintablesReddaux

Reindeer for Giant LEGO Wreath (Christmas)

I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, and thought this reindeer was cute. Left and right facing versions included. No supports needed. Thank you @ClarasLittleArtworks for the original reindeer…

Pobrania
958
Polubienia
302
Ocena
5

Reinforced corner connection for pipes

This is a parametric model made in Fusion 360 to suit your pipy needs. Simply go to “Modify→Change Parameters” and choose the values that you want to suit your pipe's diameter. Beware, the stl provided is for 32mm diameter pipes. Thanks…

Pobrania
919
Polubienia
421
Ocena
5
P
PrintablesKOGI3D

Print in Place Articulated Reindeer Model

🎨Try KOGI LAB for free at kogilab.com ! 🦌 Christmas Reindeer – Multicolor Flexy Miniature🎄 Hey everyone! 🎅✨ The holiday spirit just got an upgrade - say hello to the Christmas Reindeer! 🦌🎄 This adorable flexy reindeer is ready to trot…

Pobrania
901
Polubienia
245
Ocena
5
P
PrintablesLW design

IKEA LACK reinforcement bracket

A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…

Pobrania
897
Polubienia
172
Ocena
5
P
PrintablesKadi79

Ikea LACK Table Reinforcement

Printable without support. PETG recommendet, everything else possible. Screw holes for 4x40 Woodscrews. Credit to Littleorangeprintthingy for the original design I oriented this on. Althogh I constructed everything form Scratch.

Pobrania
875
Polubienia
448
Ocena
4,67
P

Reinforced Modular 19-inch keystone patchpanel

A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…

Pobrania
870
Polubienia
81
Ocena
5
P
PrintablesKONEz*347

Santa Sleigh & Reindeer Christmas Decoration

Santa Sleigh & Reindeer Christmas Decoration

Pobrania
864
Polubienia
220
Ocena
5
P
Printablesgeodave

Better Tolerances on Reindeer Christmas Card

I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…

Pobrania
861
Polubienia
137
Ocena
4,88
P
Printablesgerda

Reinigungs Spachtel Opti Grill

Das Tool ist zum ersten groben reinigen der Grill Kontakt Platten des Optigrill und Optigrill Elite im kalten Zustand nach dem grillen, um die angebrannten Reste problemlos zu entfernen. Mit Küchentüchern sind die Gnupsis damit das…

Pobrania
858
Polubienia
72
Ocena
4,75
P
PrintablesPrintThatBoii

Jumping Christmas reindeer 2 wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Pobrania
854
Polubienia
179
Ocena
4,75
P
PrintablesKarkovski

Prusa MMU2 Reinforced Idler

This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…

Pobrania
842
Polubienia
87
Ocena
4,86
P
PrintablesŠtístko

Voronoi Reindeer

This 3D model is a reindeer designed with a Voronoi pattern, which gives it a modern, cellular look. It's perfect for festive decoration or as a year-round piece of art. Detailed Description and Usage The Voronoi Reindeer model is a…

Pobrania
827
Polubienia
140
Ocena
5
P
PrintablesBuildItMakeIt

Reindeer Kit Card Multicolor

The reindeer card kit is a remix for multicolor printing. The ears, eye, nose, hoofs, and bum are all separate so you can print easily changes like removing the eye and setting all the colors. Clippers can be helpful to remove from the…

Pobrania
826
Polubienia
324
Ocena
5
P
PrintablesJoão

CHRISTMAS REINDEER COOKIE CUTTER

CHRISTMAS REINDEER COOKIE CUTTER

Pobrania
814
Polubienia
82
Ocena
5
P
PrintablesMiscPrinter

PIP Vise Grips with Reinforced Handle

Remix to increase the stiffness of the handle. Added a chamfered rib to the back of the handle so it flexes less during use. I also made moderate changes to how the joints are built to increase their stability during printing. I recommend…

Pobrania
795
Polubienia
97
Ocena
4,89
P
Printablesplasticbugs

Bag Clip (Reinforced with M3 Bolt and Nut)

This is a remix of the Bag Clip by Andrei. I love the design and in the spirit of over-engineering a bag clip, I added a hole for an M3 bolt and nut in place of the original's printed dowel. It uses a standard 15mm long M3 bolt and M3 nut…

Pobrania
793
Polubienia
150
Ocena
4,88
P
PrintablesMaxT

Christmas Door Trim Corner 56 - Christmas Tree and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Pobrania
782
Polubienia
174
Ocena
5
P
PrintablesDan Erbert

Next Level Racing - GT Lite / GT Lite Pro - Reinforcement

EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…

Pobrania
775
Polubienia
76
Ocena
5
P
PrintablesSLIMPRINT

Minimalist Reindeer, Seasonal Christmas Decoration

A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…

Pobrania
766
Polubienia
195
Ocena
5
P
PrintablesPrintThatBoii

Jumping Christmas reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Pobrania
766
Polubienia
200
Ocena
4,75
P
PrintablesIdea Prints

Christmas Door Trim Corner -Reindeer #5

Christmas Door Trim Corner -Reindeer🦌 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…

Pobrania
764
Polubienia
137
Ocena
5
P
PrintablesFuriku

Flexible Christmas Reindeer

Christmas Reindeer in flexible form! Became inspired to make one after having found flexible christmas tree on reddit posted couple days prior (you can actually see them in the background on my picture) -…

Pobrania
750
Polubienia
149
Ocena
4,83
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_01 9Pcs, Gingerbread Man (Reindeer) Panáček Sob, Glove Rukavice, House, Christmas Sock, Lollipop, Santa Claus Mikuláš, Sleigh Saně, Snowflake Vločka, Star Hvězda

Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Pobrania
745
Polubienia
66
Ocena
5
P
PrintablesPrintThatBoii

Christmas cute reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Pobrania
735
Polubienia
183
Ocena
4,67
P
Printablesthall72

Lego Compatible (4185a.dat) Technic Wedge Belt Wheel - Not Reinforced

This model is compatible with the lego system.

Pobrania
732
Polubienia
42
Ocena
0
P
PrintablesSK S

Furniture corner with reinforcement.

Уголок мебельный с усилением 25 мм.

Pobrania
728
Polubienia
158
Ocena
5
P
Printables3D Brothers

Low-Poly Reindeer

🦌 Low-Poly Reindeer Minimalist, geometric reindeer for 3D printing ✨. Sturdy, decorative, and perfect for festive projects 🎄. Have fun printing! 😄✨

Pobrania
725
Polubienia
177
Ocena
5
P
Printablesstijn

19" rack keystone patch panel 1u reinforced

this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…

Pobrania
710
Polubienia
89
Ocena
5
P
PrintablesZuff

ENDER 3 S1, S1 PRO, REINFORCED BRACKET Z AXIS MOTOR

FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Reinforced part to fix the "Nema 17" motors of the Z axis on Creality…

Pobrania
706
Polubienia
132
Ocena
5
P
Printablesskak76

Multifunctional Arm (Phone holder) reinforced

More durable design, changed the phone holder to another one.

Pobrania
698
Polubienia
178
Ocena
4
P
PrintablesPeter Farell

Bumble Snow Monster : Rudolph the Red Nose Reindeer.

Bumble Snow Monster: Rudolph the Red Nose Reindeer. The one thing about Bumbles → Bumbles Bounce. Tree topper Version Included. His teeth are bad. He really does need a dentist. Suppose I should do a Hermey

Pobrania
694
Polubienia
183
Ocena
5
P
PrintablesvmLOGIC

2. Bundesliga - alle 18 Vereinswappen 2023/24

English: This set includes the emblems of all the clubs in the 2023/24 season of the 2nd German Football League (Bundesliga 2). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…

Pobrania
691
Polubienia
37
Ocena
5
P
PrintablesLele88

Flexi Reindeer Rex Sleigh Santa Claus (with step file)

I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . I decided to remix this file by adding Santa's sleigh to it. An unusual reindeer XDXD Mi…

Pobrania
690
Polubienia
186
Ocena
5
P
PrintablesPotato Factory

IKEA Lack Table Angled Leg Reinforcement

Simply put, I've been using the non-mmu lack enclosure. I found the structure lacking especially in rigidity. Ironically the bottom table was fine, it was the top one that wobbled around. There also didn't seem to be a lot of angle…

Pobrania
682
Polubienia
174
Ocena
5
P
PrintablesLiouma

Tarmo5 MODS: reinforce all the frequently breaking parts

Tarmo5 is a great project by Engineering Nonsense. Now, my build is robust and powerful and also resistant to my son's driving skill. → if you are looking for my cover and wing, the page moved here :…

Pobrania
680
Polubienia
100
Ocena
5

Articulated Reindeer Christmas Bauble

Supports and Raft required, If using "Auto-Support" please make sure to remove any supports from "within" the articulated links to make movement of joints smoother and easier and to prevent any fusion.

Pobrania
672
Polubienia
158
Ocena
5
P
PrintablesJTxWölfchen

VW Golf 6 R Getränkehaltereinsatz cupholder

replacement for volkswagen golf 6 cupholder insert + R-logo

Pobrania
658
Polubienia
53
Ocena
0
P
PrintablesTheRealJocki

Tamiya TT02 TT-02 Versteifungsplatte | Reinforcement | Top Deck - LipoSaver

Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02

Pobrania
658
Polubienia
53
Ocena
5
P
PrintablesUFAB

Santa Claus on a sleigh with reindeer

Santa Claus on a sleigh with reindeer Print: Nozzle 0.40 mm Layer height 0.2 mm Infill: 10 % Support: I selected organically and placed it everywhere. Maximum print speed set to 100 mm/s. I used regular PLA. I left the reins on the sled…

Pobrania
652
Polubienia
45
Ocena
5