42 modeli
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
I love the look of the Xteink X4 Eink reader RetroCase 4c from Makerworld https://makerworld.com/en/models/2657757-xteink-x4-full-body-case#profileId-2939295 This is a simple snap on cover I made for it. I printed mine with PLA
Organizador de brocas, dimensiones 135x100x40, creado en 2 piezas
Este accesorio está diseñado para facilitar el afilado de brocas en un taladro Dremel Mototool, proporcionando un soporte preciso y seguro para obtener los ángulos correctos. El modelo permite afilar brocas a 90°, 118°, y 135°, cubriendo…
suporte para brocas de 1mm até 10mm
This is a case for a single audio microcassette (as used in dictation recorders and answering machines, not a "compact" cassette for music). Present features (compared to a standard commercially-made case): It snaps shut. It locks the…
Este es un broquero o expositor de brocas pensado para brocas de avellanado, ya que va desde Ø5mm a Ø13mm que dentro de las brocas “pequeñas” son las más utilizadas en avellanados con broca. Cada agujero tiene más holgura por si acaso el…
impreso en PLA, en capas de 0.3 y un 15% de relleno, tarda 3h aproximadamente. Para imprimir las letras en otro color debe cambiar sólo las 2 ultimas capas
A well-designed Orande pi One Plus case where everything fits perfectly and leaves all ports free while protecting the device from bumps and dirt. Every detail has been thought out when designing this housing, for example the LED that is…
Las brocas pequeñas para la dremel no caben bien en el maletin que trae la herramienta dremel y quedan sueltas. Con este estuche quedaran siempre recogidas. Sirve para almacenar otras cosas pequeñas tambien.......como tornillos etc. The…
lo imprimí en pla y relleno de 20%
Soporte para brocas con las medidas más usadas. Hay dos archivos, uno con nombre y otro sin nombre para otros usos. Este modelo fue impreso en capas de 0.3 y con un 20% de relleno en 2 horas aproximadamente.
Unos Mods para los increibles forrajeos MK2 de Ant Dimension: https://antdimension.com/collections/forrajeos-para-hormigas Para cubrir y dar altura a la trasera de los forrajeos. La base de cada pieza tiene el hueco de la escuadra y de…
Modelo impreso en PLA+ con 3 perímetros y 15% de relleno cúbico adaptativo
Rápida y buena calidad
These are cases for the active Y/C adapter made by the Retrocastle store on aliexpress. With this adapter you can connect your Mister FPGA to a CRT TV through either the composite or the S-video port. The adapter is sold without any…
caja o estuche para tener las brocas que mas comunmente se puede necesitar, con 9 alojamientos , 3 para materiales no ferrosos, 3 para materiales ferrosos y 3 para madera. el modelo se compone de 3 piezas que deven ser impresos por…
snap on RODE Procaster/Podcaster popfilter TOP/BOTTOM LAYERS = 0 infil above 60% 4 perimeters
This thing allows one to combine a Make Noise 104HP skiff with an Intellijel 104HP/7U performance case without destructively modifying either case. Simply replace the Make Noise side panels with the ones included in this thing, then slide…
Print with 35% Gyroid infill, 4 perimeters, and turn off top and bottom infill layers. You can also just use the provided 3MF project with the settings already applied. In addition, you'll need a 3mm rod or wire of some kind, of about…
Summary A remix of FDMBRO's NT-USB Dust Protector modified to fit the Rode Procaster microphone without a wind\popshield. Print Settings Printed on a Prusa Mini - from the flat end (with the mic logo) up in PLA with the standard 0.2mm…
Thanks to @meltmidori for the original design. It covered the audio jack so I made a slimmer version that allows you to still access it. Case used in the photos is here .
These are covers needed for the 2024 RetroCastle I/O board and the pieces that stick out of the case, including the MicroUSB Bridge and HDMI Ribbon Cable adapter to the Video DAC.
This is the printable box for Pragotron/Elektročas/IBM pulse generator. use PETG, 0.2mm, 350g, full filling The main power supply is done by 24V external source (either use a 24/2A rectified transformer or the original Pragotron ZZ24…
PLA, puede ser a alta velocidad maximo 110mm/s
I made a cover for the Xteink X3 retrocase. This is to cover and protect your screen
This is a case for the RetroCastle General VGA (15khz) to Composite/S-Video Adapter for the MiSTer FPGA. The PAL/NTSC switch is accessible and labelled from the top of the case. It requires 4 x M3 10mm to 16mm screws, whatever you have…
Es una caja para brocas de hasta 10mm. Espero os guste. ----------------------------------------------------------------------- It is a box for drill bits up to 10mm. I hope you like it.
Caja Portabrocas centradoras de visagras
A nice retrocase 4c led light attachment someone shared online I slightly adapted it to make the Retrocase 4c modular.
PiZeroCase with added mount M5 machine screw. Removed logo from lid.
Required slicer settings: Disable supports - the base was designed to be able to be printed without support, also, there's holes inside it (the "tunnels" for the zip ties) that could be blocked depending of how supports are configured on…
Suporte para afiador de brocas remix de outro que quebrou - Support for drill sharpener remix of another one that broke
organizador brocas y centradores
Required slicer settings: Disable supports - the base was designed to be able to be printed without support, also, there's holes inside it (the "tunnels" for the zip ties) that could be blocked depending of how supports are configured on…
Slimmer yet sturdy minimalist case, omitting switches/USB port access. Secured with two M2 screws (5 mm length suggested).
Thanks qubit01 for this great Design in OpenSCAD. So far I only made designs in Tinkercad and then in Fusion360. Since my PC is running mainly Linux and I didn't want to load windows I tried to use OpenScad. qubit01 has made the…
Remix of the covers for the HDMI ribbon cable connector for the dual RAM model of the Mister FPGA from Retrocastle. The original creator of the covers is Kuro Houou and here's the link for his design:…
Cover for PS-1 movement of the industrial clocks Pragotron / Electrocas / Chronotechna / Jednotny cas PLA / PET-G, 3 perimeters, 20% infill
Portabrocas para centradores Category: 3D Printing
The shelf is angled back by 5° to help keep the tapes securely in place and reduce the chance of the holder being accidentally tipped forward or backward. The angled design also makes the tapes easy to see and access while keeping the…
For this case u need to Solder main voltage connections! If u do not feel like doing this, u may should use a extension for the PSU mains connection. If u want to use an extension, u can contact me and i try to add a 3D model do integrate…
