Liczymy pasujące modele…
Based on measurements of an actual Life Savers (Peppermint) candy, I modeled this, split it, and added internal pockets for 6x2mm neodymium magnets, six per half. The text isn't perfectly matched to the actual candy, 'cus Fusion spacing…
"These are "Ear Savers" that PandaProps designed for health care providers to use. These are for installing behind the head of surgical masks, to remove the strain of the elastics behind the ears which can cause chafing and soreness. I…
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
Collection of ear savers / mask straps I have found
These are colored, by layer, superhero logo ear savers. They are a remix of many sources from Thingverse. They are set up to use a common configuration using the Multi-Material 2S but could be printed by swapping filaments at the layer…
Ear savers help relieve strain from your ears when wearing masks for extended periods of time. The stackable ear savers can be easily stacked and printed. These ear saves take up less bed space to print than most others and uses less than…
These Stick Savers are meant to be attached to the thumbsticks of an Xbox controller to prevent movement (and hopefully any potential damage) while transporting the controller in a bag. I've taken my controller with me on a couple trips…
Cable Savers iPhone Keeps Apple Lighting cables from ragged and bent.
I blew up my Life Savers candy based magnet fidget design just enough to fit on a Prusa Mini bed, then hollowed it out and added a locking mechanism to act as a secure storage container. Great for a candy dish! HUGE update to this model.…
These are colored, by layer, themed ear savers. They are a remix of many sources from Thingverse. They are set up to use the Multi-Material 2S but could be printed by swapping filaments at the layer changes on a single color printer. The…
These are colored, by layer, Mandalorian themed ear savers. They are a remix of many sources from Thingverse and some original work. They are set up to use a common configuration using the Multi-Material 2S but could be printed by…
Ear savers make wearing facemasks for a whole shift tolerable. Fast print and I can fit 12 of them on one build plate. I am cranking them out by the dozens now in the evening. Disclaimer: I tried the mini ear savers out for some time, but…
5 fun ear-savers: Heart, Rainbow, "My other mask is an FFP3", "Cough if you got it last night" & "How's my nursing?" I hope they make someone smile. It's possibly worth noting that the arms are extra long to reach around other PPE such as…
These are colored, by layer, Marvel logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
Stick Savers! Protect your Joy-con sticks from breaking off when traveling.
With the age of these cars the original plastic is becoming very brittle. In many cases as you remove and install parts to service your car the threads in the plastic will break rendering a costly trim piece all but worthless. These parts…
Diese Maskenverlängerung erleichert das Tragen von Gesichtsmasken (Covid-19). Sie schont die Ohren und ist angenehm zu tragen. Eine Seite der Maske wird in die Verlängerung geklickt damit beim Abnehmen der Maske die Verlängerung an der…
Remix of the [original design](https://www.thingiverse.com/thing:4756605/zip) improving upon the compliance of the clips by removing a slight amount of material where the they bend outwards. This increases longevity of the clips and…
These little pizza savers keep your pizza from getting messed up when inside their box! The legs are 4mm in diameter and 35mm tall, the table top itself is 2mm. Their use as a 3D print would most likely be a stringing test. Check out the…
These are colored, by layer, Star Trek (the original series) logo ear savers. They are generated from a scan of the Star Fleet Technical Manual, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a…
You've probably already seen something like this on TV. You can easily chain multiple hangers together to save space on the pole in your closet. I wasn't about to buy these so I whipped up my own design and printed them out. They work…
After printing many of the flat ear savers for people and only getting 8-10 on the print bed at a time, I decided to make something better. I saw a design similar to this, but the designer was providing STLs on-demand with the supports…
I blew up my Life Savers candy based magnet fidget design just enough to fit on a Prusa Mini bed, then hollowed it out and added a locking mechanism and dividers to act as a secure storage container, suitable for small parts, or whatever!…
These are colored, by layer, Marvel logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are some ear savers that…
Are you tired of your paintbrushes getting ruined by having their bristles deformed? The manufacturers tell you to keep them in their original cardboard package, but who keeps those around… Let me share some simple sleeves with custom fit…
This model was designed to be used either standalone or with my thread saver model to organize and store threads for embroidery and sewing. The lid has a snug fit and can be customized with your own SVG. This is done directly on…
Ear savers that keep attached to one side of the mask. This is a reproduction from a clip found in kids' masks. Print instructions Replicate as needed on the testbed, one of the flat sides down. I tested .2mm without issues in PLA.
Are you sick and tired of boring ear savers yet? Yes we are! Introducing PISCEZ: Fishy Ear Saver for the Ages. Twin coelacanth fossils from the Early Devonian Period (~400 million years ago) discovered somewhere in Canada just yesterday.…
A handy quick print that can be used in multiple ways to organize threads, especially useful for embroidery, cross stitch, and sewing. Usage Includes a longer version that is handy for keeping thread “scraps” while you're working, and a…
11pcs of motivational ear savers print time is about 1:10 (1hr 10minutes) I have had good results with amazon basics PETG and MG chemicals PETG. This is for 0.4mm nozzle equipped I3 MK3S printers. Print instructions Setting are included…
This is a speed optimized profile for printing 11pcs of the motivational ear savers in 36 minutes on a PRUSA I3 MK3S. This is pushing the limits of the hotend so you may need to characterize and tune your MVS if you don't have the same…
This is a remix of these ear savers but adding a Prince theme, because I love Prince: https://www.thingiverse.com/thing:4249113 Print instructions No supports required, will fit on a Prusa Mini. Print with default slicer settings in PLA.…
This ear saver works with the same set up as my other colored Super Hero ones here (see for colors and other instructions) https://www.prusaprinters.org/prints/36368-super-hero-ear-savers/files It can be printed with or without the…
I started printing ear savers for my mom, which led to people at her hospital asking for some, then I started getting requests for different designs - so I created my own template to be used easier with Prusa MMU and Mosaic Palette. There…
I printed these from PETG at 100% infill. We'll see how they hold up. They need a lot of supports to print properly unfortunately.
This is a simple money bank without any opening for getting the money out of it. So it has to be cracked to get to the money inside. Maybe a good motivation for keeping the money. Print Settings Printer: Self built Rafts: Doesn't Matter…
This is a design I came up with to alleviate having to keep track of other ear saver variants. You simply leave them on your hat, and attach your mask when needed. When installing, it helps to pop the inner coil part out past the "P"…
Este clip sirve para sujetarlo a la goma de la mascarilla y que pasando una goma por tu cabeza sirva para que no te moleste la goma en las orejas. CLIP SALVA OREJAS EARS SAVERS CLIP FACE MASK MOUSE TAIL CORD Print instructions Fácil y…
Use these at your own risk. These are small versions of mask savers and should fit kids, but if you use these for yourself or on kids it is at your own risk. Please be responsible with them and do not use these on young kids that cannot…
If you have boxes of TCG “bulk” you know how frustrating it can be when it falls over in the box! These were inspired by metal book ends that rely on the weight of the books to keep them in place. There are two styles, one for horizontal…
print ear savers in bulk, and over them to friends and co-workers in nice display case
A simple concept where the paracord goes around the center, rather than through it. Giving the illusion that there is no cord. Easy to install, only requires a lighter, and scissors, or other cutting tool. Just make sure the end of the…
The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…
Print the clip Press the clip onto the Back Stop pins Personally, I printed these in PETG, but feel free to experiment with other materials. Enjoy and feel free to let me know how it goes or any potential suggestions!
this is a 3d copy of finger savers I designed. for a pvc bow I made where normal ones are too lose, or on paracord survival bow where the normal ones would be too tight. Or if you just want another color or kids bow don't wanna spend…
These are colored, by layer, Southwest Airlines logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
Stretch Wrap Hand Savers For Pallet (or whatever) Wrapping When the stretch wrap rolls get wet or just used a lot the cardboard inside frays making it hard to use. This should help. Printed mine in PLA but would probably be better in…
Crocs are cheap footwear from supermarkets - very handy in the garden and for various lazy moments. What to do if the plastic rivet holding the strap in place breaks? Rip the strap off? Buy new crocs? At first I made the replacement rivet…
Remix of https://www.printables.com/model/510666-joystick-savers-v2 combined with oval "Wings" from https://www.thingiverse.com/thing:5349829 for GameSir G8/G8 Plus. Print Settings Printer Brand: Monoprice Printer: Select Mini V2 (E3D)…
pokeball earsavers print at 0.15 layer height, and iron top most layer for best results add color changes start with red grey @ 0.65 White @ 0.80 Black @ 1.10 Then iron the top.
During printing I'm finding some of the sharp corners are lifting off the print bed. These anchors will help with adhesion to the bed on the first layer. I currently have six files in here (1.25cm x 0.10mm, 1.25cm x 0.15mm, 1.25 x 0.20mm,…
Ear savers for medical masks. I tried a few and ... ended up writing my own, so here they are. The straight one is more durable and the round one more comfortable but also looks a bit funny. Category: Accessories
You know them, you love them. Your favorite mask accessory, the ear saver. Now available for tiny printers, specifically designed to fit the Monoprice Mini Delta (MPMD). Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts:…
Heat with a hairdryer then bend to desired shape.
UPDATE 9/16/2021: I've updated this design with a taper on the posts which should make it easier to remove the ear savers (still untested and I don't plan to so if you make one please provide feedback). These are some holders designed for…
Remix of https://www.printables.com/model/510666-joystick-savers-v2 combined with oval "Wings" from https://www.thingiverse.com/thing:5349829 for Xbox One/360/Series
A few of the frame's I've ordered have had fairly thin anodizing that was prone to picking up scratches during the build process. I came up with these temporary feet so that I could lay the printer on any of its side without my work…
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/a2aGAWtbXFT Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Infill: 20 Filament: any pla Category: 3D Printing
Little tripod stands that sit in the middle of a pizza so the box lid can't sag onto the cheese and toppings, for home pizza ovens, takeaway nights and pizza parties. They also make tables and stools for dolls' houses and model scenes.…
During school I made my own scissor tip covers because while traveling to school my scissors would pole through my backpack. I must have lost 3-4 backpacks to scissor holes. This simple tip cover which can be fixed to the scissor handle…
A few of the frame's I've ordered have had fairly thin anodizing that was prone to picking up scratches during the build process. I came up with these temporary feet so that I could lay the printer on any of its side without my work…
Stretch Wrap Hand Savers For Pallet (or whatever) Wrapping When the stretch wrap rolls get wet or just used a lot the cardboard inside frays making it hard to use. This should help. Printed mine in PLA but would probably be better in…
This model was designed to be used either standalone or with my thread saver model to organize and store threads for embroidery and sewing. The lid has a snug fit and can be customized with your own SVG. This is done directly on…
If your plastic bezel is sagging due to the screws breaking the the old plastic posts then this print is for you. These screw savers replace the old screw posts (all three different styles). These fit and work without glue but you can…
Custom version of the Fabric Face Mask Clips. https://www.thingiverse.com/thing:4496809 There are three improvements. Ver1.0.0 Resize the magnet mounting part so that DAISO's 13mm neodymium magnet, which is easily available in Japan, can…
