P
PrintablesGamano_CZ
Stojan na HDD_SDD
Stojan na 3.5/2.5(7/9mm) HDD/SSD.
Wydruk około 19,59 €–23,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
Wyniki wyszukiwania: sdd
32 modeli
P
PrintablesPvtDBJackson
Snap-On Screwdriver SDDP42 Handle
Snap-On screwdriver handle modeled by manually measuring one. This isn't exactly functional as-is, since there is no provision for attaching anything to the handle. This is uploaded so that others might remix it into something useful.…
- Pobrania
- 1131
- Polubienia
- 104
- Ocena
- 5
P
PrintablesBasementLAB
SDD - HDD 2.5 Storage Tray x5 / x9 / x10 slots - Basetta per HDD-SDD a 5/9/10 posizioni
SDD - HDD 2.5 Storage Tray x5 / x9 / x10 slots - Basetta per HDD-SDD a 5/9/10 posizioni 75x107mm x 5 Slots 93x107mm x 9 Slots 87x113mm x 10 Slots Easy to print, optimized filament usage Update 22/01/2025: added HDD_SSD Storage Tray S2.stl…
- Pobrania
- 516
- Polubienia
- 48
- Ocena
- 5
P
Printablesfilament
Fujitsu Futro S720 S920 HDD / SDD 2,5" mount
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
- Pobrania
- 380
- Polubienia
- 24
- Ocena
- 0
P
PrintablesFederkicco
HP Microserver Gen10 SDD mount on ODD bay
This model allows to mount a 2.5" SSD drive on the optical disk bay of an HP ProLiant MicroServer Gen10. I printed it in PLA, on my Prusa i3 ML3. The print requires no supports.
- Pobrania
- 220
- Polubienia
- 17
- Ocena
- 4,8
P
Printablesodonnell944
Satsana for Ender 3 with MSDD - BLTouch / CR-Touch Steel Bracket
If you have a CR-Touch, the Satsana remixes that have the integrated BLTouch mount will NOT work! The position of the wiring connector is right between the 2 mounting screws. This is also for the Ender 3 V2 using the Micro Swiss Direct…
- Pobrania
- 209
- Polubienia
- 21
- Ocena
- 4,5
P
PrintablesAbrège
Support HDD et SDD
Pour supporter les disques dur et limiter les virbrations avec un élastique de 50mm de diamètre
- Pobrania
- 208
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKeen
Low profile PCI Slot 2.5" HDD/SDD Mount over motherboard
This needs a little bit more work. But is mostly functional for now. I had a bit of trouble fitting it square to the case. I broke the screw hole tab. I would love to make this printable without supports, fit a wide range of cases, use…
- Pobrania
- 206
- Polubienia
- 27
- Ocena
- 4
P
PrintablesYa Ikou!
Ender 5 MSDD Linear Rail and Drag Chain Adapters
Update (28 Feb 22) - Added MGN12H adapters for the Y-axis. I don't have extra MGN12H rails/carriages myself, so if you print this, please provide feedback. I designed it around the same mating surface of the MGN9C rail so it should work…
- Pobrania
- 100
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJoSeWo
HDD / SDD Cady / Tray for HP ProLiant MicroServer Gen10
I got a HP ProLiant Gen10 Server second-hand with missing screws for the HDD. These specific screws should be T-15 Torx 6-32 UNC. Also, I couldn't find a model that fits. To help myself, I created my own caddy. There exist 2 version, HDD…
- Pobrania
- 79
- Polubienia
- 2
- Ocena
- 5
P
PrintablesLee
3.5"/2.5" SDD/HDD Drive bay rails for Corsair Air 540
These are some drive bay rails for the Corsair Air 540 computer case (may fit other Corsair models as well). Also included is an adaptor for mounting 2.5" drives. To install the 2.5" adaptor, first attach it to the drive using standard…
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 0
P
PrintablesElton
Smaller MISTer FPGA Case without the SDD Slot
Warning: This was my first time modifying anything, I'm inexperienced. So print at your own risk. Removed some sections and the SDD slot to make it fit on my Ender 3 Pro. I also added a hole for a basic power switch. I just wanted a…
- Pobrania
- 59
- Polubienia
- 10
- Ocena
- 0
P
Printablesaylen384
Fujitsu Futro S720 S920 HDD / SDD 2,5" mount - Lower profile and shifted to mainboard
Remixed from https://www.printables.com/model/250963-fujitsu-futro-s720-s920-hdd-sdd-25-mount Made the plate thinner allowing for more space in the PCIe slot next to the hdd (e.g. for internal power supply). This requires screws with head…
- Pobrania
- 57
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDoktorOlsen
10 inch 1U rack module for 4 x 2.5 inch hdd sdd drives
Module for use in my Lab Rax 10" home network rack. The original I have remixed didn't quite work for my setup, so I took a stab at correcting the issues. Now it lets me fit my 4 x 2.5" 15 mm drives, and it extends a bit less in depth…
- Pobrania
- 55
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRom1
HP Workstation Rack for 2.5 HDD-SDD
I designed this rack to add an additional disk in my HP Workstation (Z440).
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
PrintablesUwe Grunewald
Wall mount for Raspberry Pi5 in Geekworm Case for NVMe SDD
If you run several Raspberries (I run 3: Home assistant, WordPress, Dashboard) you need to store them somewhere. I decided to wall mount them under my desk. The result is a simple wall mount that fits this case:…
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJoost Bloemsma
SDD
Simple stackable drawers. With optional seperators . To use them use the special drawer for seperators
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTri-D
Universal SATA HDD / SDD harddrive labeling cover
This cover can be used to label your harddrives and protects the connector during storage. They are initially made for 9.5mm thin 2.5 SSDs but fit perfectly on also on 3.5 inch HDDs. You can print them simple in different colors to…
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 5
P
PrintablesStsfin
Toolless HDD/SDD caddy for HP Elitedesk 800 G6 Mini
Toolless HDD/SDD caddy for HP Elitedesk 800 G6 Mini Might work with other models too Strongly advice to print it in petg so it flexes for ssd/hdd installation in to the caddy. Use organic supports, printbed only
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
Printablesrobertdminter
Ender 5 MSDD Cooling
Thanks to Print2Win for https://www.printables.com/model/116678-microswiss-ender-5-directdriveallmetalhotend-assem it was a lot of help getting the design together.
- Pobrania
- 22
- Polubienia
- 8
- Ocena
- 0
P
Printablesgjktaylor
Ender 5 Plus Linear Rail Hotend Carriage MSDD
Got tired of other models out there not being exactly what I needed. This design is meant fill those gaps. It installs onto the backplate of MicroSwiss DirectDrive Ender 5 Plus printers that are going through Linear Rail Conversions. I…
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAiron
ESDDI TP-35 Camera Tripod Leg Fixator
This is a replacement part for the ESDDI TP-35 Camera Tripod Leg Fixator. Printing: * Supports: yes * Infill: 20% * PLA
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
Printablesstokedmind
PI 4 + 3x sdd tray combo remix
The initial v1 release is just to solve my problem of needing a more space-saving solution in my homelab rack. See the original release for printing instructions. The first release worked fine, printed on my Elegoo Centauri Carbon in…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEmpyrean3D
Satsana Ender 5 MSDD 12mm EZABL
Resized hole from an 18mm ABL and repositioned a new hole for 12mm EZABL. Home (nozzle) offset: X13 Y7 in cura Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: Overture…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAnthony Lopez
7mm & 9.5mm SDD/HDD Case
Made a simple travel/storage case for 2.5 inch, 7mm and 9.5mm, SSDs and HDDs. I recommend to print with TPU or another flexible filament. Tried different SSDs and HDDs, all fit nice and snug so far. 9.5mm case can be used with 7mm SSDs or…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAmmar Faridi
2,5 to 3.5 hdd sdd adaptor
I wanted to use 3.5" hdd to 2.5" ssd adaptor in my western digital mycloud drive.. couldn't find any for the caddy style slider...so designed one. there are two kinds of drives.. rotary one and ssds.. these models are for both.. if you…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 5
P
PrintablesDingo
Micro Swiss Direct Drive (MSDD) Extended Extruder Arm
Needed something easy to load filament on this abomination. This was the result. Just uses M3 nuts on the back, I forget the bolt size but when I tear it down I'll update this with the sizes I used. If you have a little kit of…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHimanshu Gangwar
Raspberry Pi 4/5 Cluster with Sata Sdd Storage
Remixed this to remove power supply and added slots for Sata Disks with case
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJirka Cota
Kryt SDD
Jednoduchý kryt NVMe SDD pro dron s popiskem :-)
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
2,5 to 3.5 hdd sdd adaptor
I wanted to use 3.5" hdd to 2.5" ssd adaptor in my western digital mycloud drive.. couldn't find any for the caddy style slider...so designed one. there are two kinds of drives.. rotary one and ssds.. these models are for both.. if you…