2521 modeli
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Wife needed this as a planter so I hollowed it out.
Wydruk około 5,79 €–7,07 € nettoWstępna wycena jednego wariantu
A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons. It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed this at .15 layer height but .20 should work, add supports to the wings and the main body may require supports for coin slot. For a two colour body add colour change at 110mm in your slicer. Low Poly Version can be found here. 🤗…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 9.4mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
In the files you'll find a 16-thread and a 8-thread version of it. 80 mm in diameter 2,5 mm thick With haptic directional arrows, letters and braille. You can print it directly without supports. In the files you'll find also find the…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Starship shaped valve cap for Schrader and Presta valve types
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Remixed from: https://www.thingiverse.com/thing:3084118 Credit goes to SnickerdoodleFP Hollowed out the above Spaceship Earth model to make a bowl to hold keys, jewelry, etc. Also printed in clear PLA to be able to stick an LED inside to…
Wydruk około 11,76 €–14,37 € nettoWstępna wycena jednego wariantu
Attention veteran pilots of the ‘Verse! Are you tired of having to re-assemble your ship every time you feel like flying to Persephone for a Fruity Oaty Bar? Or when parts fall off every time you full burn? Worry no more! Download plans…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
Print with the rim of the half facing down, and pins if you want it to stay together. Add supports to the underside of the top of the dome, with a 0.1mm offset for the supports for less sagging on the bridges. Made in Blender, after…
Wydruk około 15,93 €–19,47 € nettoWstępna wycena jednego wariantu
Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Toothbrush holder for five toothbrushes. Hole diameter: 17 mm Print without supports
Wydruk około 6,65 €–8,13 € nettoWstępna wycena jednego wariantu
Imagine a million years lost in space and time, after crashing through a vortex of loose change it has transformed my original creation into a stealth low poly rocket bank. Be warned it's a bit battle scarred and dented but still holds…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Damaged Starship Cargo Pod The stars won't wait, nor will the cargo inbound to your customers. Intermodel Cargo Pods are found on every planet in the populated universe and multiverse (universal quantum wave function, anyone?). It's how…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena jednego wariantu
PIRAT SHIP CARIBBEAN PIRATSKA LOD KARIBIK PIRAT
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
I found a cool drawing of an artist called HUNTER G showing a redesign of the U.S.S. Curry - NCC-42254 and I need to create an 3D model of it. Its a low detail model at the moment consisting of 69 STL files.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Just a container ship version of benchy with separately printed containers that fit in this ship The ship can hold six containers firmly Have fun
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Friendship Bracelet Wheel 7-colors Here is a tutorial to make the bracelet (not mine video): Feel free to like, download and follow. If you want check my other models. Happy Modeling and Printing!!!
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Want to travel the space? Just save your money and enjoy the ride before you grow up! Space for money? Checked! Hyperspace circuits? Checked! Quantum engine boost? Checked! Comfy chairs for the crew? Checked! On-board antigravity source?…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, I designed this all in insert for the base game and 3 expansions. Print everything once. No supports needed.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
In my Seafarers expansion pack the ships made out of plastic and not wood. Therefore I did a remix and created a modified version for the plastic ships.
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple tool to hold your Oak & Iron ships while painting!
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
This is a modified version of Foba's original HD Kadeshi Mothership, available here . The stand mount was removed and the model has been sized up to be in-scale with zacbond's Kushan Mothership . Because of the increased size, the ship…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
Farben 1 Galaxy Silber https://www.prusa3d.com/de/produkt/prusament-pla-galaxy-silver-1kg/ 2 Anthrazit https://www.dasfilament.de/filament-spulen/pla-1-75-mm/444/pla-filament-1-75-mm-anthrazit-v2?c=11 3 Schwarz…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
If you want to sail the seas with style, you can't do it without the ship's rudder buttons.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Jolly #3DBenchy ⚓ is one of the most popular benchmarking models for 3D printing until these day. But if you have whole fleet, handy stand will be useful. This model is from 2016, but I hope you will like to have it here as it's as…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
SHIP ABANDONED ICEBREAKER LOD LEDOBOREC
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
An insert for Shipwrights of the North Sea and runesaga just because there is space in the box. Fits sleeved cards
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Print with PetG for tougher use. Works with cookie, gingerbread or any dough. Have fun!
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
battle spaceship space rocket galactic bitevni vesmirna lod vesmir raketa
Wydruk około 11,28 €–13,78 € nettoWstępna wycena jednego wariantu
BATTLE SPACESHIP SPACE ROCKET GALACTIC BITEVNI VESMIRNA LOD VESMIR RAKETA
Wydruk około 9,65 €–11,79 € nettoWstępna wycena jednego wariantu
i thought this would be a cool print for space and spacex fans i found that printing the stand upside down was a rough to remove the supports
Wydruk około 7,34 €–8,97 € nettoWstępna wycena jednego wariantu
This is a slight remix of the the organizer designed by pitrichter on thingiverse, found at the following link: https://www.thingiverse.com/thing:2827155 I modified the model slightly to add one more section to the tray in order to…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena jednego wariantu
Here is a model that I designed to replace the card-stock print and play shield tokens. I have had some success with painting these in the same look as the provided files in the print and play game using acrylic paint. However the set…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
This ship appeared in the epilogue of The Owl House. This model has two pairs of articulated print-in-place wings. Dimensions Length Width Height 82mm 59mm 79mm Print Instructions Printed at 0.1mm layer height. Requires supports. The…
Wydruk około 5,24 €–6,41 € nettoWstępna wycena jednego wariantu
The final word in squad organization and identification. Description Included: A 1-color variant dial cover A 2-color variant dial cover 2 target lock tokens (open) 2 target lock tokens (filled) 1 small base ship identification ring with…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…
Starship V2 The new version of starship, the starship V2 , is also available and is compatible with this booster. Updates 02/08/2024 Change parts SS_Tank_Bot_Black and SS_Tank_Top_Black to add thermal tiles. 21/04/2024 Correction of…
A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded. Have fun printing :) Video: Print instructions Video…
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide…
Emma is based on a Container Ship but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but…
Fixed version of linked Thingiverse project. Printed on Bambu Labs X1C using Hatchbox Wood Filament. Use supports for the shields specifically and anywhere else you feel like it would be beneficial. Mostly default print settings for Bambu…
Hey guys! I would recommend printing this model vertically with supports. Here is a model of the SpaceX StarShip. This rocket will be the largest and most powerful vehicle ever made. Starship will be responsible for missions to Mars, the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a detailed model of a rocket ship…
Its a complete battle ship game, which can be broken down into pieces for printing and storage. Whole thing fits into a large stone wheat thins box. Lots of very small pieces so not good for small children. Print instructions You would…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is an elegant, minimalist rocket ship…
I present a remix of a popular dino keychain prepared by my 9-year-old daughter, I am very proud of her. The dinos are 75% scale compared to the original. Despite this, the mobility has been preserved. Additionally, the right one is…
I'm sharing modified 1:144 scale models of SpaceX Super heavy - Starship I recommend printing in PLA with a layer height of 0.2mm and organic supports for parts where needed. The model is intended for more experienced printers. Print the…
A printable OpenSCAD pirate ship. While it will definitely require support for the bow, the rest of the model should not. The OpenSCAD code isn't commented at all, so it may be difficult to follow. There are two main parameters -…
A benchmark that has extreme overhangs, bridges, fine details and more! No Supports and prints in less than 1 hour! Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
To rotate the turret, gently twist the turret after printing to break the connection. Two turret designs. It can be printed without support as in normal Benchy. Category: 3D Printer Accessories
This is a pocket-sized, travel game of battleship that fits inside an Altoids tin (ok… technically two Altoids tins). This mini version includes all the pieces you'll need to play including: Both Play grids Hit/Miss Pegs (I would suggest…
I hope you enjoy playing this version of the classic naval battle game as much as I did, both as a child myself, and later as a father with my own kids. It is one of the few board games you can easily play over Zoom, etc. This is a major…
I recommend making these with silk PLA filament for extra shine ✨ Print settings: 0.2mm layer height 0.4mm nozzle Compatible with my other models: Craft Tweezers Beedle Friendship Bracelet Making Tool ✨If you like what I do✨ Follow me for…
So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.
This 3D printable model is a stylized pirate ship, designed for use in ‘Lying Pirates’, scaled perfectly for the game board. Whether painted or left in its natural finish, this model brings a captivating, tangible element to the 'Lying…
This is the ship from my first video. Some of you wanted to make it, so here you go. YOU NEED TO USE COLOUR CHANGE IN YOUR SLICER TO GET THE COLOUR COMBINATION OF YOUR LIKING!! You can use my model for colour reference. Everything was…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
This loom/station will allow you to more efficiently make friendship (macrame) bracelets. Especially the more complex patterns with 10+ strings. Suggested use : The bottom arc has 50+ slots to fasten the strings quickly. They are held in…
Model from Halo for the UNSC Heavy Frigate ship. Comes with original model, with a pre-split files for a 400mm model.
This is the project O'neill where I design a 3D printable model of the O'neill class from Stargate franchize. It is divided into several subassemblies. The model has one unique feature - a retractable landing leg so that it could stand on…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Fusée de TINTIN The iconic tintin rocket! I printed it with phosphorescent red and white filament Magnificent decoration for fans of the TINTIN comics! ______________________________________________________________________________________…
A miniature of a flying galleon ship. This model can be used as a space galleon in a Dungeons and Dragons Spelljammer game or in other tabletop fantasy games. This model is at a scale of 1:600. This is the same scale as the official…
The lord of the rings Fellowship - wall art, easy to print, There is full stl and splitted to half for bigger print.
40' HO scale shipping containers. Contains High-cube and normal height containers. Contains a version that has holes in the bottom to insert weights (3/8-16 hex nuts) for better operation on well cars. Use the weighted container as the…
To see more about this you can watch this video: https://youtu.be/iKs8YzkTYc0 Edit: I've added a stand for the ship due to a high number of requests. :) I'm back with another 3D design for you, and this time we're making the Planet…
Model of the Mandalorian Kom'rk class (Mark 3) spaceship from the Mandalorian. https://starwars.fandom.com/wiki/Kom%27rk-class_fighter/transport The Wings can be rotated and folded. For the folding mechanism its important to print two…
What is this? This is my approach of designing SpaceXs Mechazilla Launch Tower. It is designed to work with AstroGuy's Starship. Ive also used his LauchPad. And a piece of the super heavy for the GSE Tank :D. How to Print? Some Parts are…
Pirate ship model I found in my hard drive from back in 2012. Not sure if the really small ropes will actually print well unless your printer is very much tuned in.
An influential ship, with a storied history and record, the USS Tripoli is a great little desktop model. The model aims to provide a sufficient level of detail to be realistic and interesting as a desktop model, but not so saturated as to…
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
This is a digital 3D printable model of T-70 X-Wing Starfighter from the Star Wars Universe. The T-70 X-wing starfighter, also known as the T-70 X-wing fighter, was the successor to the T-65B X-wing starfighter, manufactured by…
Description. The Hot_Staging_Ring_Metal_x1 replaces V2_Block_Jonction_SS-SH_x1 and then add Block_Jonction_HSR_x1 to assemble the starship. Printing There are 2 pieces to print. The total printing time is approximately 1h30. Tips Settings…
Rework of the 1:500 multi colour, multi plate model I originally made to allow it to be printed in a single colour, at smaller scale and in one go, rather than as separate parts. Designed using Fusion 360 from ship deck plans, photographs…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Razor Crest - Star Wars Ship Model of a spaceship from the Star Wars movie saga. Modeled at the request of my first supporter and club member. Also for Star Wars fans! I don't know how accurate the model is, I modeled it based on pictures…
MarcMartin3dnd over in Thingiverse published this excellent model, based on the sample map in the 5e Dungeon Master's Guide. This is a version of this model optimized for the Prusa XL, specifically: It's made of two huge parts (that…
Full model 1:550 scale (~40cm long)
Another great model uploaded to https://3dwarehouse.sketchup.com/search.html?q=starwars&backendClass=entity as a free download I like this model, but I'm guessing at about 5 - 10 kg's in plastic and 8 months to print. I might just shrink…
The MZ4250 Astral Exploration Ship is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC. Want…
Feel the power of the Rebellion with this incredibly detailed X-Wing starfighter 3D model that brings the iconic spacecraft right to your desktop! This meticulously crafted STL file captures every signature detail of Luke Skywalker's…
Bring the galaxy's most legendary smuggling vessel to your desktop with this incredibly detailed Millennium Falcon 3D print STL model! This iconic starship figurine captures every surface detail and panel line of Han Solo's beloved…
This is the mothership of Goauld Anubis. It has mechanism inside which allows it to retract the superweapons. All the moving parts are linked into that mechanism so one movement will do all. Appart from that, it comes with a fleet of 8…
A remix of Gargi's sith fury. Removed the interior and landing struts and fixed some of the geometry to reduce the need for supports inside the model. Supports on the build plate are still recommended. Makes a great addition to the X-Wing…
Updated 30/9/23: Corrected a problem with the port side of the hull section not slicing correctly. See Iona S500 V2c file Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
remixed the model to add the logo of one of the most famous shipping lines. It can printed as a desk drawer or as scale model for a mockup. 21/01/2023 Add stl models of logo to be printed and glued to the container. Check photos of…
This is my model of the awesome SpaceX rocket Super Heavy Starship. The model is in 1/48 scale so it is almost 2,5 meters tall. The assembly is rather simple as I had marked all the parts with individual numbers so that you know how to…
Recreate the spaceX starship launch with this desk stomp rocket. With a good push I have managed to get the rocket up to 3 meters, how high can you go? ;) All parts printed in Bambu Basic PLA, when using different filament the tolerances…
This is my project of Ori Mothership as seen in the Stargate SG-1. It is around 40 cm long, consists of several pieces that come together like a lego. No glue needed. It has retractable landing legs so no pedestal is needed. I recommend…
Update 23/7: Added floatplane (Curtiss SC-1). Available under “Download STL” files. Update 25/7: Updated Assembly Guide for AA gun placement. Update 29/7: Revised Aviation model for better printability, .3mf updated to include Sprueless…
Original model This remix is to be used with my starship S24 and the booster B7 . Description This pack replaces the following parts SS_Cone_Tiles_Black_x1 SS_Tank_Tiles_Black_x1 Flap_Top_Left_Black_x1 Flap_Top_Right_Black_x1…
Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…
Updates 01/06/2025 Model available for free for everyone! 04/03/2025 Update of “Cone_Metal”, “Tank_Metal” and “Engine_Bay_Metal” parts due to poor export quality. Information This model is a new model based on the Ship S33 , as the…
![Futurama Space Ship - Piggy Bank Rocket [Futurama Inspired Cosmic Ship]](https://media.printables.com/media/prints/654736/images/9098547_fb814b0e-3ecf-4ca0-be08-6bf452b7e64c_5284d75e-103d-4256-ab0a-184357911a24/space_piggy.png)
![Planet Express Ship [Futurama]](https://media.printables.com/media/prints/13401/images/119451_6d72a11d-800e-425e-a1ae-f59fb614c828/planet_express_pic_1_13401.jpg)
