Wyniki wyszukiwania: shuffler

Sortowanie

58 modeli

P
PrintablesMike B

Card Shufflers for double-sleeved Magic The Gathering or It's A Wonderful World cards

Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
1681
Polubienia
275
Ocena
5
P
PrintablesLukas Cenovsky

Playing Card Shuffler v3

Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…

Pobrania
17 461
Polubienia
3457
Ocena
4,47
P
PrintablesLukas Cenovsky

Playing Card Shuffler v2

This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…

Pobrania
6938
Polubienia
1906
Ocena
4,21
P
PrintablesRosti

High friction washer - Playing Card Shuffler V3

I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…

Pobrania
2770
Polubienia
1335
Ocena
4,33
P
Printablesroofuskit

Playing Card Shuffler

This is not really a remix, this is simply a translation of the file names and instructions for the Playing Card Shuffler by farfadet53. I have not yet printed this myself, once I do I will update this thing with photos. If it doesn't…

Pobrania
1805
Polubienia
234
Ocena
4,67
P
PrintablesLawrence H

Card Shuffler Springs

Print as you normally would. I used PETG @.2 layer height with .4 nozzle. They should be glued in place on the original model directly above the center of the roller. Thanks for the original model @LukasCenovsky

Pobrania
1196
Polubienia
190
Ocena
4,86
P
PrintablesDocPeppercorn

MTG EDH Card Shuffler & Tray

Took the OG card shuffler and simply made it a little bigger so that you could one-handed shuffle an entire sleeved commander deck. No supports needed. Feb 2024 update: Based on a great suggestion by @SaschaSpieker_445421 in the comments,…

Pobrania
1073
Polubienia
120
Ocena
5
P
Printablescmh

Bicycle spoke nipple shuffler - wheel building tool

Inspired buy the gorgeous wood version available at Wheel Fanatyk: https://wheelfanatyk.com/collections/lacing/products/wheel-fanatyk-nipple-shuffler (if you build wheels, you will definitely want to read Ric's awesome blog, which you can…

Pobrania
849
Polubienia
104
Ocena
5
P
PrintablesAlison Pinto

Card Shuffler for Mysterium and Dixit sized cards

I have several expansions for Dixit and the cards are too large and cumbersome for my hands. This is a remix from both Lukas Cenovsky's and LightValen's shuffler and cogs. I increased the angle of the card feeder and changed the overall…

Pobrania
764
Polubienia
94
Ocena
0
P
PrintablesBohemian

Sleeved Card Shuffler

Updated on 12/22/22 Filleted the corners to make it nicer to carry without pointy edges and to make it easier to print. Updated on 9/23/22 After receiving feedback, I have updated the file to make the shuffler much easier to use and is…

Pobrania
657
Polubienia
88
Ocena
5
P
Printablesnao580

Playing Card Shuffler v3 97x71

97x71 version of the original project

Pobrania
620
Polubienia
61
Ocena
0
P
Printablesgeeklimit

High-grip parts for Playing Card Shuffler v2

I've recreated the single TPU O-ring because you only need 4 + the 2 wide rollers.

Pobrania
551
Polubienia
77
Ocena
5
P
Printablesnfd

O-ring for card shuffler v3

O-ring for the shuffler, in case you want to try to print it in TPU. I've gotten decent results with 95A TPU, but it's possible other materials might be a bit better (chime in in the comments if you have any suggestions!

Pobrania
512
Polubienia
44
Ocena
4,8
P
Printablestommck

TPU O-Rings for Playing card Shuffler V2

These are simple o-rings created inside PrusaSlicer. I made them slightly larger than the o-rings Lukas used. They are 12.5mm diameter inside and 19mm diameter on the outside (2mm thick). Printed w/ 100% infill with a 0.6mm nozzle, they…

Pobrania
351
Polubienia
54
Ocena
5
P
Printablesgnyman

Rubber band shaft for card shuffler

Edited the shaft so that it works with small ~1.5 cm (~0.6 inch) rubber bands. Works great. Thanks to @LukasCenovsky for doing all the hard work and then sharing the scad file to make this possible.

Pobrania
335
Polubienia
30
Ocena
5

ONI - 150g Antweight/ Fairyweight shuffler hammer saw combat robot battlebot +.step

This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…

Pobrania
268
Polubienia
44
Ocena
5
P
PrintablesLukas Melvin

Spacer for hand crank on V3 Card Shuffler

this is a super simple remix of a remix. I took a spacer from a v2 remix ( https://www.printables.com/model/391943-card-shuffler-for-mysterium-and-dixit-sized-cards/files ) & resized it to fit this V3 Crank to help keep the gear from…

Pobrania
193
Polubienia
14
Ocena
5

Sturdy wheels and shafts for playing card shuffler V3

!!! I made this remix from the 93x71 files, please make sure the gears fit on other sizes!!! There are 2 different nuts, I think you only need one of the smallest for the handle shaft Make sure you have your tolerances tuned!

Pobrania
184
Polubienia
24
Ocena
5
P
PrintablesShmoee

Kartenmischer Kartenfach card shuffler wide remix for standard width "Bicycle" cards

This is a wider version of the "cut-out" remix of the "Spielkartenmischer / Card shuffler" to support wider cards such as standard width "Bicycle" branded playing cards. I've also included a slip-on ramp for each side table that…

Pobrania
167
Polubienia
19
Ocena
0
P
PrintablesCTNeptune

Card Shuffler Tray Replacement

A neighbor lost the plastic tray that went inside the automatic card shuffler we always use to shuffle cards with. I took measurements, designed a replacement, and printed it. Now you can use it too! Features Fits most automatic card…

Pobrania
152
Polubienia
13
Ocena
0
P
PrintablesSaphir

Molding Kit for Cardshuffler-Sealings

This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…

Pobrania
133
Polubienia
16
Ocena
4,5
P
PrintablesAstrovore

Sleeved Card Shuffler (Filleted)

This remix adds fillets to the edges of the shuffler to reduce the chance of warping during printing. Otherwise it's identical.

Pobrania
130
Polubienia
10
Ocena
0
P
PrintablesConfusedByBirds

Mini cards adapter for automatic card shuffler

A small adapter that fits into an automatic card shuffler, allowing it to shuffle mini (44x68mm / 1.73 x 2.68in) board game cards. Useful for Ticket to Ride , 7 Wonders: Duel , or any other game that asks you to shuffle those awkwardly…

Pobrania
103
Polubienia
18
Ocena
0
P
PrintablesSpencer Jackson

Card Shuffler Crank Arm

My kids broke the crank arm off my card shuffler which I like to use for deck builders (especially when you are trying to shuffle only 10 or 12 cards at a time). So I measured the pieces and used my poor CAD skills to make a new one. This…

Pobrania
94
Polubienia
2
Ocena
0
P
Printableshugodrax

Bicycle Nipple Shuffler - Wheel Building Tool with Pizzazz

This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.

Pobrania
87
Polubienia
8
Ocena
0
P
Printablesdavidianstyle

Commander Deck Shuffler (v4)

If you've had the experience of trying to shuffle your 100-card double-sleeved Commander deck and spraying your cards all over the table and floor, this handy little aid can help prevent that from happening again! Currently on iteration 4…

Pobrania
77
Polubienia
9
Ocena
0
P
PrintablesJavin Craig

Manual powered automatic card shuffler adapter for smaller cards (Wyrmspan Caves) and replacement tray

This is an an adapter that keeps smaller cards (in this case, Wyrmspan cards) from rotating and getting caught up when being shuffled using a hand cranked automatic shuffler. This isn't a perfect solution, but works well enough. The…

Pobrania
68
Polubienia
21
Ocena
0
P
PrintablesStudio 507

Card shuffler carry / storage box

This is a carry / storage box I made for the Card Shuffler by Josh-3D . Shuffler, This box fits the tall shuffler, so it will work for both the tall and standard shuffler. I suggest printing the box using PETG or better for durability. I…

Pobrania
62
Polubienia
32
Ocena
0
P
Printablescfinke

Card Shuffler Tray

It’s a replacement tray for this card shuffler I bought for $0.25 at a garage sale a decade ago. Category: Toy & Game Accessories

Pobrania
56
Polubienia
0
Ocena
0
P
Printablesswoozle

Card Shuffler Crank Handle

These cheap manual card shufflers are all over Amazon and they work well - for as long as the crank handle lasts. One extra handle is provided, but even so the handles break before very long. The shuffler itself will last a much longer…

Pobrania
48
Polubienia
1
Ocena
5
P
PrintablesKake Prints

Fixed Sloted Plates for card shuffler - MTG - Magic The Gathering

I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesDigiKey

Shuffler Mechanism

A shuffler mechanism is a fun, unique, and lightweight way to add motion to your robot or other projects. It uses a drive cam system to move feet in a heel-toe motion for propulsion. There isn’t a lot of documentation about this, so I…

Pobrania
41
Polubienia
9
Ocena
5
P
PrintablesSandmännchen

Card Shuffler Conveyor Wheel for 32mm x 3mm O-ring seal

I have modified the Card Shuffler Conveyor Wheel to fit for 32mm x 3mm O-ring seals.

Pobrania
41
Polubienia
2
Ocena
0
P
Printableshugodrax

Bicycle Nipple Shuffler - Wheel Building Tool with Pizzazz - Bike Gear Contest

This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.

Pobrania
36
Polubienia
5
Ocena
0
P
Printablesthedude386

Card Shuffler Replacement Tray

The clear plastic tray that holds the cards in our card shuffler broke. I designed a replacement that fits well. I printed in PETG because that what was loaded into my printer at the time but really anything will work. I printed on it‘s…

Pobrania
33
Polubienia
2
Ocena
5
P
PrintablesAaron

spinning part for cheap card shuffler card hand crank

Additional part for crank arm to make it spin easier No supports, print vertically Takes about 10 minutes to print and you have to push quite hard to get it on, but it will not come off afterwards.

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesKickbut101

Manual Playing Card Shuffler - Less plastic

Modified parts for the awesome manual playing card shuffler from user RockstarAlchemist. The goal of this remix was to reduce the amount of plastic needed, also to help make the shuffler a bit more efficient --6-5-17-- Added a modified…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesS. Stobbe

Crank for Amigo Card Shuffler

This crank improves the usability of the Amigo Card Shuffler since it features a rotating handle with knurled surface or can be used as replacement part. It also might fit to similar machines of other brands. The axis is 4,3 mm square. It…

Pobrania
25
Polubienia
10
Ocena
0
P
PrintablesKennyB

Card shuffler crank and handle

Family game night was saved using Spencer's crank model ( https://www.printables.com/model/872475-card-shuffler-crank-arm ), but couldn't resist making a few usability tweaks! I shortened the main crank shaft a little because my hand kept…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesAdam Churney

Automatic Card Shuffler Battery Cover

Kids = lost pieces… after getting frustrated that the batteries kept coming loose while shuffling cards I designed this battery cover. Printed using just PLA and .4 nozzle and .20 height and normal supports. V1 works… when it breaks I'll…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesJack Fraser

Robot Shuffler Foot

This is a shuffler mechanism designed to fit on REV c-channel and use their HEX shafts.

Pobrania
17
Polubienia
0
Ocena
0
P
Printablescodexmas

Card Shuffler Gear v3

Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: hole_diameter = 2.39 no_angle = .1 tip_height =…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesgedeyenite

ShuffleBox G1 PRO 2025 - Automatic Card Shuffler and Dealer Discard Adapter/Topper

I play UNO and Five Crown via Tabletop Simulator. When I play IRL with friends and family, it is tedious to deal and shuffle. Especially Five Crowns. My spouse came across the ShuffleBox G1 PRO 2025 and I purchased one immediately.…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesChuck B

ARRCO HAND CRANK CARD SHUFFLER CARD DRAWER

ARRCO HAND CRANK CARD SHUFFLER CARD DRAWER. I don't know if it will work with the battery powered version. V3 :I updated it a little, the cards were falling out because the back wall was to close. So this might work better for you, if the…

Pobrania
13
Polubienia
0
Ocena
0
P
Printablescodexmas

Card Shuffler Replacement Gear v2

Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: no_angle = 1 cog_tip_width = .6…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesSpencer Jackson

Card Tray for Shuffler

Keeping this shuffler running by printing out a new card tray.

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesGreg Zapf

Improved Card Guide for Manual Card Shuffler

After a few failed attempts at printing the CardGuide file, I zoomed in on the model and saw incomplete areas that were causing the failures when I sliced with Prusa Slicer. This file is a simple hack and bash correction that allowed me…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesSiggie Pop

Stiffer Nippleshuffler

I really liked the nippleshuffler by Lexapskov (https://www.thingiverse.com/thing:4605923) but the print turned out a little flimsy for my clumsy hands. So I added a little strengthening.

Pobrania
11
Polubienia
1
Ocena
0
P

Card shuffler crank (key form)

My card shuffler's crank broke by accident. Rather than buying a new shuffler, I was lucky enough to find a crank design. However I soon realised that the shuffler would work better with a key mechanism so I combined the following models…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesbriand42956

MTG Commander Shuffler and Library Tray for Single Sleeved Deck

Took Doc Peppercorn's updated model, which is also a tray, and modified it slightly. You can still one-handed shuffle an entire sleeved 100-card Commander deck. But its overall dimensions have been reduced slightly so it will fit in the…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesKennyB

Card shuffler card tray

A replacement card tray fitting a common manual, plastic card shuffler. After losing our original card tray (how does that happen?), and continuing to use the shuffler, spewing cards everywhere or jamming, I decided to go ahead and make a…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesTony Hanma

Hand-Crank Card Shuffler with Real Gear Train (Multicolor)

A hand-crank card shuffler for family card and board games. Put half a deck in each tray, turn the crank, and the cards drop one by one, alternating, into the middle. One crank drives both rubber wheels through a real involute gear train,…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesPapa Nick's CPS

One-Handed Card Shuffler

One-handed Card Shuffler sized for standard 52 deck size, but will work for euchre deck (24) or 40 or so sleeved cards. Works well placed on table or cradled in other hand. Larger deck sizes available soon. I included solid model to make…

Pobrania
3
Polubienia
1
Ocena
0
P
Printablesfelixna

Card Shuffler Replacement Drawer / Tray

This is a replacement drawer / tray for a common card shuffler. I printed it in transparent PLA which gives it a nice look. If you like my design, please rate it, give it a like and probably post a make. Thank you!

Pobrania
1
Polubienia
0
Ocena
0
P
Printablesprinting pros

2 deck card shuffler tray replacement

I was paying cars one time and the card shuffler tray dropped and shattered. I ended up making a 1 on 1 perfect fit for the original tray that shattered. I highly recommend petg at 100% infill but pla at 100% infill also still works just…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

Card shuffler crank and handle

Family game night was saved using Spencer's crank model ( https://www.printables.com/model/872475-card-shuffler-crank-arm ), but couldn't resist making a few usability tweaks! I shortened the main crank shaft a little because my hand kept…

P
Printables

Fixed Sloted Plates for card shuffler - MTG - Magic The Gathering

I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…