145 modeli
After redesigning the TLER's design I overall shrunk it down and added some new points to it. First I used a squared bit at the ends to join them together with super glue or your glue of choice. you can still use the rifle from the…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
The original design customized with the logo of fab lab siegen. For those who want to customize their Original Prusa with the logo of their local Fab Lab Siegen.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I honestly have never played Rainbow 6 but my friends say it good so I made this logo for them. It comes with a stand. I would recommend setting the scale to 300 but I made it smaller for a key chains.
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Nach 12 Jahren begann die Lambdasonde meines Pellet Kessels von Buderus im Betrieb davonzudriften, sie meldete während des Brennprozesses Werte von 12% bis 19% Sauerstoff, statt der geforderten 6%. Ich orderte die Original Bosch/Buderus…
Wydruk około 8,61 €–10,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Notes: Printed with supports: Drone Body 1 Printed without supports: (everything else) Always print: Drone Body 1 Drone Body 2 Drone Shaft 1 Drone Shaft 2 Drone Tail For Regular wheels print: Wheel 1 Wheel 2 For TPU/Dual colour wheels…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
This keycap was modeled from scratch using one of the keycaps from my MX Cherry Red based board. I converted the Rainbow 6 Siege Logo to an SVG, and using a series of extrusions, splits, and cuts, ended up with a custom key where the R6…
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:…
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
Jynxzi streamer charm from Tom Clancy's Rainbow 6 Siege
This is a Proxinity Alarm from Tom Clancy's Rainbow Six Siege. Since the file download of Thiniverse is bad, I included "R6PA_All_Files_ZIP.ZIP" to download all files at once. You're welcome. It was modelled in Fusion360. F3D files are…
I found this model at MyMiniFactory and modified it for easier printing. I also added a stand and made a fuse out of wire and a key ring. For better details, use the variable height layer on the Impact Grenade button part as you can see…
This model was inspired by https://www.thingiverse.com/thing:1603188 Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 10 % Ironing: Top layer
Wreak historical havoc with this working Roman catapult — a miniature Onager, named after the wild donkey for how violently it kicks when fired. Designed for real torsion-powered launches, this siege engine adds a touch of ancient chaos…
This is a interpretation of the Starcraft 1 Siege tank from memory. Though there are some differences, I believe it is recognizable. Category: Vehicles
This model uses the following electronics: 1x OV2640 120 degree camera 1x XIAO-ESP32-S3 Sense 1x ESP32-S3 2x SimpleFOC Mini 2x AS5600 2x GBM-5010 T150 90Kv 2x MP1584 PSU 1x 4 Cell Lipo See pictures for wiring Diagram. If you have any…
-I've created 3d models of the Rainbow 6 Champion Rank. These must be highly scaled in the slicer (Cura will auto-scale), due to an issue in Onshape with exporting to stl, however the details still appear well. -Each file is each color…
I made that prop to see if I can make accurate prop with very limited time and technical resources. If you print in resin, use: blade right features and blade left features and then paint it in preferred colours. To make pattern pop i…
Material Used: Prusament PLA Blend Viva La Bronze
Contains a .stl and .3mf file.
Warhammer siege wall for battlefield building
Eine Halterung für das Frische-Siegel System von WC-Ente. Aufrecht stehend drucken, eventuell mit Brim Category: Bathroom
This insert fits everything from the trooper pledge (and the „bonus“ map pack) inside the white big box for Rainbow 6: Siege - the board game. Box setup (top to bottom): rules top layer: barricade_tray : all barricades breach_tray : all…
This is my recreation of the CCTV camera from Rainbow 6. The design uses a twist lock mechanism. Use #8 screws or double-sided tape to attach the mount plate to the ceiling. Press fit the dome into the body then twist the assembly onto…
Valletta Siege Bell and Fallen Solider monument scanned using Lidar and Photogrammetry
Fuzes cluster charge from R6. Its Dodgy if I'm being honest, I've never really made anything in 3D but it was still fun. The bolts on it are fake and for show only.
I printed the Hallway Seej set and while the idea is absolutely fantastic the model didn't fit for me at all. It had way to loose tolerances. Furthermore even with the largest stopper it shot way to low. To reach any distance, I had to…
Habe zwei STLs eingestellt. Einmal das normale Logo und einmal mit dem Schriftzug "Pokalsieger 2018". Habe jede Ebene 3mm abgesetzt, falls man das ganze nach unten skalieren will oder muss - Außendurchmesser bei 100% ist 200mm. Somit kann…
Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Gun for Transformers Siege Sideswipe or Earthrise Sunstreaker. Has a 5mm peg so compatible with all modern 'bots. Modelled after the Masterpiece Sideswipe weapon and scaled down appropriately to fit Siege/Earthrise figures. Print Settings…
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
Rainbow Six Siege Chip, same size as a 1€ coin to fit into shopping carts.
This is a two-box insert for Earth Under Siege: Flashpoint, including the World Killer expansion. It's an amazing game reminiscent of X-Com, with a bunch of tokens, cards, and miniatures to keep track of, thus many of these trays can be…
A Siege tank created from memory. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 20% Post-Printing Sanding is optional How I Designed This Fusion 360 Category:…
Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
This should be semi correct scale of Fuze's Gadget from Rainbow 6 Siege. You'll have to glue the side pieces to the body, side cylinders to the side pieces and battery or screws on each side piece. If you want to modify the model, feel…
This is a replacement part for the window hinge cover cap that originally comes from Siegena. I printed it with white PLA.
Shield of Blitz from game Rainbow six siege.
Buck talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
"alastor" siege cannon from game "REDCON" ,you can find soldier and "basilisk" cannon in my profile
Rainbow Six Siege GSG9 Keycaps Just print and have fun :D
Ein einfacher Siegelring und mein erster Versuch einen Ring zu designen, der auch noch zum erstellen eines Wachssiegels dient. My first try to design a ring, thats also acts to seal something with wax
Late Middle Ages - Generic Siege Artillery with crew for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Filament: Creality PLA Category: Games
I shield I made to pair with Optimus' battle axe. I used black matte spray paint for the base and gold to fill in the Autobot symbol. Also I wanted to added battle damage to fit the theme of the Siege line but I forgot to buy silver paint…
Attached is the main body. Top 10(?) layers were done in white petg, rest were in clear petg. Will add enclosure if there's interest.
Charm version of Ela's operator icon from Rainbow Six Siege. Needed a lower resolution model to print at smaller sizes on my MPSM v2. v3 - test printed decent (see photo), though I'm not super confident in the keyring (rounded) v4 -…
The Siege Engine, with adjustable torsion springs. It is the real thing in the palm of your hands!
I glued the two parts togheter, because I didn't want to use supports and I'm still not confident with my printing skills. You can change the knob's dimensions to your needs
Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
I got sick of having tons of bags in this box so I made a rudimentary organizer that works with sleeved cards. Maybe someone can make a better one! You will need 2 of the following: SoR-Top3cards.stl SoR-Top3cards-lid.stl…
Mira talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Bandit talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Krytka pro spodní okenní pant plastových oken.
When I got my figure, I looked around for any 3d printed Upgrades I can do at home. the one I saw related to the sword was cool, they weren't 3d printed but was still cool. taking off the blades and making the handle a proper rifle is…
Montagne talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Breach Charge from Rainbow Six Siege
Cet insert/organizer permet de ranger le jeu et son mode campagne. Les emplacements pour les cartes sont dimensionnées pour des sleeves Arcane Tinmen.
As the box for this boardgame is unconventional, so are the trays in this insert. You must print Cards.stl and Standees.stl twice each. Vertical storage is supported. Sleeves are supported, except for siege cards.
I always desired the "Time To Kick Ass" charm from R6 and one day decided I could not live without it anymore: I designed it in blender, printed it and hung it to my AR15 because why not. Note: I just designed the tag, the boot itself is…
Dieser Wandhalter dient der einfachen Aufbewhrung der Cobra Siege 300 mit angeschraubtem Zweibein. Gedruckt in PLA. Mit 5 Wallloops. Viel Spaß beim nachdrucken.
In the picture, the hook size is smaller than in the project, that is because while printing I thought it would be too small, but that depends on the size you print it. In the wings the height is just 1 mm, and after printing it I saw…
Fab Lab Siegen Logo added to the model
My skills modeling have improved so I decided to update my original fillings with more detail. I did print these on a poly jet printer so the detail may not come out as intended on ABS or PLA. These will fit Soundwave and Soundblaster.…
Just because Sideswipe get's his shoulder cannon, doesn't mean Red Alert shouldn't. The design was referenced from previous versions of Red Alert's shoulder cannons and there are two versions just so everyone can print it regardless of…
Jackal talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
With the castle last week, this release had to come! You now have a siege tower, a ram, plus siege ladders to effectively attack the castle you printed during the last week. Enjoy your siege games! I don't think I need to add much info to…
Thatcher talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
A while ago I printed several Rainbow Six Siege Drones from dasjulian3 here on printables, My friends and I who play R6 loved the model. But I had an issue where the shafts he made were to loose and so the drone would fall apart. I made…
These are just simple AIO Covers to make them look Cooler. Look out ! If the Fans have Silikon Bumpers the Cover might not fit right
Super 90 Blaster From Rainbow 6 Siege (For UDL XM1014) Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
Capitao talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
This is a simplified version of the Siege workshop from age of empires 2. The building comes out well, though you will need supports for some of the overhangs Category: Video Games
Model printed well for me, it's not fully dimensionally accurate but looks decent. I ended up painting the 'metal' part rather than printing from grey filament. Turned out decent.
The Iron Covenant Siege Engineer keeps the kingdom's engines, gates and fieldworks functioning under the worst conditions of war. His heavy engineering hammer, rolled construction plans, measuring tools and lifting hardware make his…
My easy to print variation of the old game, Crossbows and Catapults. If you've never played the game before then the idea is to hide a flag behind a self built wall and then try to knock over your opponents flags using Crossbows and…
A seal for a letter with In-Produkt logo. The seal was printed with SLA and a layer height from 0,1 mm. Ein Briefsiegel mit In-Produkt Logo. Das Siegel wurde mittels SLA Druck hergestellt mit einer Schichthöhe von 0,1 mm.
The small version of blitz shield.
A proxy set for Kill Team. Suitable for Wreckas Supported files are in the zip archive They represent mutated manufactorum personel into siege ginner hulks, similar story to Gellerpox Scaled to match tankbustas All come presupported Enjoy…
Spessore per il livellamento cerniera FS Portal Siegenia sul profilo R40 con Nodo centrale. Stampato in PetG
The Ironjaw Siege Breaker is a living battering ram sent straight into the strongest point of an enemy line. Covered in brutal plate armor and gripping an oversized siege hammer with both hands, this Orc is built to crush shields, gates…
Designed for Siegen SG-3049C02 hair dryer, but possibly compatible with other brands and models of similar dimensions (see photos). Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro Rafts: No Supports: Yes Resolution:…
Bandits Shockwire from Rainbow Six Siege Things you need: Clamp for a scooter battery Black Tape Super glue Red and blue wires
R6-themed cap for the Corsair Titan AIO. I made a version with and without some fake bullet holes in the cap. I recommend printing in a translucent or iridescent filament to take advantage of the AIOs existing lights. I've had good…
The IQ Scanner from Rainbow Six Siege. Glue the single parts together and enjoy :D Thinks you need: -M4 Screw -M2 Screw -Superglue
In this game, you play as a horde of goblins attempting to climb a city wall. Each player wants their clan to be the first inside the city. You will want to build off of your opponent's efforts while sabotaging their attempts to finish…
This is based on the opus injection charm from Rainbow six siege
Sledge's hammer from siege. Would probably work best with a fine nozzle to get the hammer nubs to print better. I used a 0.4mm nozzle and it turned out decently. Download 2 of the head parts and one each for the shaft.
A 3d model of a jackal keychain!
Official Fab Lab Siegen key chain.
