155 modeli
This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
Truhlicka na kapesni tiskarnu od znacky Silvercrest a naplne do tehle tiskarny panty a magnet na zaviráni jsem si koupil v obchode pro kutily na fotkach ktere priložím tak jsem to slepoval protože jsemi to nevlezlo na Prusu original Mini
Remixed spool dryer to make it compatible with 350W food dehydrator! Tested with Silvercrest and Quigg components! Made also some change to the mode: PTFE guides moved to the back; added PTFE guides to the base instead of the middle part;…
The fan broke with no reason. Disassemble it, copy the design, print, is what I've done. printed with support for the blades. Designed with FreeCAD, I added the body part file for modification purpose.
SilverCrest Blender Clutch Replace
Spojka pro ruční mixér SSMS 600 C3 z Lidlu. Když se zasekl nástroj tak původní spojka povolila v tisícihranu a motor se otáčel naprázdno dál. Tím neříkám že tahle nepovolí... Netuším jestli je to nejlepší volba, ale tiskl jsem z PLA, 100%…
This is the third hand mixer that breaks the same way. We decided to repair, but did not find any replacement part. Only in an Asian store for a well known German brand, so we decided to clone it, although some parts were fused.…
New clip for sandwich toaster. I recommend to print it from some high temperature filament, in my case PA12CF15.
A simple holder for this cool SilverCrest Zigbee power strip. No supports needed, it can be printed with PLA or PETG
Lidl Silvercrest salt/pepper mill final drive gear replacement part for https://www.lidl.pl/p/silvercrest-mlynek-elektryczny-do-soli-lub-pieprzu/p100339179002 Recommended material: PC, Layer: 0.2mm, Wall count: 4;
repair gear silvercrest chopper ref : Silvercrest SFW 350 C1 C2 D2 D4
In reason that my kitchen roll holder ( https://www.printables.com/de/model/258984-openscad-kitchen-roll-holder ) makes me still happy, i create this peace to mount the kitchen scale under the kitchen cabinet, too. Screws 6x DIN 7981…
Turbine on my silvercrest robot vacuum cleaner broke, so… fusion360 to the rescue. It fitted perfectly for me. Hole for the shaft is 2.5mm. Printed in PETG, but any fillament will do. Fins are 0.8mm (2 walls).
There are 3 files: - an STL with a 5mm countersunk hole - an STL with a 5mm simple hole - a STEP file where you can the hole size that suits your needs. Printed in PLA using a 0.2 layer height, but most likely any setting will do. For…
This adapter is for scanning Advanced Photo System films using a Silvercrest SND4600 scanner. By unspooling the film, each negative image can be shown in the adapter's window and scanned. The design based on oztds model which he sincerely…
The original component was hollow (presumably for cost efficiency), but I didn’t replicate that — the goal here is to make it stronger. It works very well. :) Printing tips: Material: PETG Infill: 100% Support: Yes (Normal, not tree) Use…
This is a replacement for the final drive gear of Lidl SilverCrest electric salt/pepper mill. Due to the high milling torque, the factory gear is prone to losing a tooth. This design is perfectly compatible with the original gearbox, but…
CORNER BRACKET for fixing a SilverCrest lidl MOTION DETECTOR. SilverCrest Motion Sensor Model SMSZ 1 B2 manufactured by Lidl. I looked for a simple solution is effective, This radar has an aperture of 120 deg, for a height of 2.30m the…
Cooking robot tools holder under cupboard.
SILVERCREST mixer/blender clutch adapter for machine from lidl the original broke so i made one in ABS
Sollte in temperatur bestandigen Material gedrückt werden
Silvercrest smzc 500 c2 mini chopper part, the original part it broke, so I designed a new one. Use minimum off 3 walls and 100% infill to make strong enough Also use the orientation showed on picture. Material recommendation: use some…
The blade was falling out, and rotating above the locking mechanism, so securing the locking arm wasn't enough. This part is pushed to the blade-lock, to secure it in place. Now, even if the arm or the blade is rotated, it won't unlock…
This is a cheap method to build a DIY filament dryer. Buy a “Dörrautomat” (German model) like Silvercrest Dörrautomat SDA 350 A2 (Lidl) AMBIANO Deluxe (Aldi) Buy a cake lid (Tortenglocke) like “Rotho Fresh”. Print the connector and glue…
It has an extra 0.3 mm on the top of the placement to correct the heigh deviation produced by the support contact. I printed it with an 0.2 mm Z distance on the supports. I designed it with F3D and did it to add a temperature and humidity…
Replacement part for the "Messeraufnahme" / motor to knife coupling for Monsieur Cuisine Plus / Silvercrest SKMK 1200 A1 This model fits very snug and should hold without the snap ring. The snugness should make it last a little longer…
Cette piece est en remplacement du clips de verrouillage de l'aspirateur SILVERCREST SHAZ21.6 B2, pour garder le tube en place s'il est cassé. This is a replacement clip bracket for the SILVERCREST VACUUM SHAZ21.6 B2, holding the tube in…
It's the adaptor from pemlik, I just needed to add a 1.5mm rim to be able to make the Silvercrest TRV not loose on it. If you want to modify it, you need the original model to import in the OpenSCAD.
The extension of adapter is from 6mm to 7mm wide, change it in provided.3df file if you need to. Adapter for Silvercrest SAS 7.4 LI D3 you can find here .
This is a remix of @Haprog's Filament dryer extension for SilverCrest dehydrator to fit a rectangular Jedew thermometer/hygrometer: https://www.amazon.nl/dp/B0DNJYVJNK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Remixed in Onshape but the…
The closing mechanism broke at our Silvercrest toaster. That's why I created a replacement closing mechanism. It's a red part in the pictures. The mechanism is easy to put on and holds in place. Printed with Prusament PETG on Prusa MK3S+…
Držák pro pohybové čidlo SILVERCREST. K přichycení lze použít nálepku nebo šroubky, pro které jsou dírky v držáku naznačeny. Doporučuji tisknout z PETG. Koukněte i na mé další modely .
There is no cross from one side, as it is not necessary and to be more firm, I just did a "dash" design. Printed from Spectrum ASA 275 with 100% infill. Clutch tested by my friend and he said it is ok, fits well. Layer: 0.25mm Infill:…
This is plug for Silvercrest's Monsieur Cuisine all-in-one thingy with locking functionality as with original blades. You have to use gasket supplied with blades. DO NOT HEAT UP!. Especially if you used PLA. Also DO NOT USE IT WITH…
Horizontal/cylindrical food dehydrator extension (Lidl SilverCrest). 28.5cm of diameter The extension is cut into quarter (so you need to print 4 of them). I assemble mine with CA glue and high temp aluminium tape. I added butterfly…
Overlocker spools are much cheaper than standard sewing spools for the same length, so I designed a holder to easily use them on my sewing machine. My machine has a coil holder slot with a 6mm hexagonal recessed hole (between two parallel…
My SILVERCREST® Allesschneider SAS 120 C1 began to stuck when I tried slicing bread. Therefore, I decided to disassemble the whole thing and the source of the stuck knife was a bit hidden. Two of the teeth of the big gear which is located…
Print Settings Printer: Prusa MK4S Supports: Yes Resolution: 0.15 Infill: 15% 30+ might be better Filament: PETG PLA was not tested
Silvercrest Bread Maker Paddle Post-Printing Category: Parts
Created a 45 degree angle corner mount for a silvercrest / LIDL smart home zigbee motion detector.
Lidl Silvercrest Smart Powerstrip Wall Mount.
LIDL silvercrest SSM 180 A1 safety latch spring originally is made from very weak plastic and it is easy to break. When broken, the motor cannot be started. This replacement part is slightly stronger because contains more material due to…
With the SilverCrest foam soap dispenser, the lock tabs can break off at the battery cover. Since it was not possible to buy this replacement, I created a 3D model. It is necessary to print with supports, and the use of soluble BVOH/PHA…
Drop in replacement for original broken clutch (white on photo) Need use some force to connect. Push motor down to clutch laying on desk. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution:…
Printer: Wanhao Duplicator i3 Filament: Devil Design - PETG - Light Green (You can use whatever filament you want.) Extruder temperature: 235 °C Bed temperature: 70 °C Infill: at least 30%. Support: I think it's not necessary if you align…
Silvercrest Mini Chopper Gear Set If it can help somebody ;-) Jeux de pignons pour hachoir Silvercrest Si ça peut aider quelqu'un ;-) Print Settings Printer: Anet A8 Custom Rafts: No Supports: Yes Resolution: 0.2mm Infill: 100% Category:…
All these accessories need to be in a box for good overview if something is missing. So I created this box with separately printed logo-plates (glued in later). Logo plate printed on a carbon textrued build plate. Designed with TinkerCad.…
Here is a cover for the Silvercrest's SDA 350 A2 dehydrator to put 2 filament spools in it. The main différence compared to existing model is that this one can be print fast in one single part in spiral-vase mode (on a 350+ bed ). It can…
Replacement Gear for the Silvercrest bread machine. Unsere selbst gebastelt und 3D Druck Gruppe: https://www.facebook.com/groups/1410069952670233 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Material: PLA Support structure doesn't matter
This is a simple stand for a Silvercrest motion detector.
A plastic wire whisk attachment for SilverCrest mixer. Remember that you need to have original wires as this is only the think holding them. Settings: Layer Height 0,1mm Supports Yes I used PETG for resistance #Note Rotate the top part to…
Case compatible with Lidl Silvercrest On-Ear Headset (IAN 359732, EAN 4055334412216) with FreeCAD file
A simple container for Silvercrest nose and ear hair trimmer (Lidl) in which you can also store the accessories and always keep it close at hand. Printed in PLA eSun Matte Black
Printed from PETG with organic supports, no brim.
I am providing two versions of wheels for the Silvercrest SHAZB 29.6 B2 vacuum cleaner. The two-part version allows the tread to be printed from a different material. The flat version is easier to print. Print flat.
This 3D printable holder offers an ideal storage solution for your Silvercrest Hand Mixer and its whisk attachment. Designed with precision, it ensures each component has a dedicated and secure place, allowing for proper organization and…
Designed for the SILVERCREST SSMS 600 D4 blender. But I believe it will work for other models as well. Recommended settings Material: PET-G Layer height: 0.2 Perimeters: 4 or more Infill: 20% Infill Type: Cubic (or something similarly…
I use this logo for creating plates (plaques) for my SilverCrest tool boxes. Printed on my MK3 with MMU2s with PLA, 0.2mm LH. You can also print this without MMU. For build-plate I used an Ali-plate with carbon texture. Looks great,…
This thingy, that holds the whisk and liquidiser adapters in place in my SilverCrest hand blender broke at the snapping area. So I've decided to take my caliper, and recreate it in Fusion360. You don't have to buy a new blender! And if it…
It was annoying that I had to clean the counter from soap drops that dripped down every now and then, so I created this drop catcher. It fits the SilverCrest SSDES 350 A1 automatic soap & hand sanitizer dispenser. Hope it helps you :)
Silvercrest portable vacuum to hose, so that you can connect to other items like sanders, and dust collectors… the hose hole is 41.5mm you might need to make your own adaptor for it to fit your hose. should just be friction fir, you could…
Silvercrest Electric Soap Dispenser Holder with Removable Soap Drip Catcher. No supports needed. Silvercrest, soporte para dispensador eléctrico con vaso extraíble para recoger jabón sobrante. No necesita soportes, fácil impresión.
This is a replacement clip for a silvercrest vacuum cleaner that loose one of the original ones
SilverCrest Kitchen Scale Under-Cabinet Mount (186 mm) This simple and practical holder allows you to store a 186 mm SilverCrest kitchen scale underneath a kitchen cabinet or shelf, keeping valuable countertop space free while ensuring…
Installation requires: - 4x M2.5 Nuts - 4x M2.5x12 Screws
Stand for a SilverCrest Hair and beard trimmer. Model number: SHBS 3.7 B Printing: No support needed min 15% infill 0.2 layer height
Simple bracket to hold Silvercrest powerstip from LIDL. It is parametric, and it is oriented sideways as I needed to mount it under a shelf but still having the outlets facing towards me.
Silvercrest SBB 850 kneading paddle spare part. Never bake dough with it, because the kneading paddle will melt! Only for kneading. Suggest to print out from PLA, low printing speed like 100 mm/s infill layers, 50 mm/s outer layers. Print…
Standfüsse für Raclette Lidl Silvercrest. Somit steht das Gerät höher, man kann besser in die Pfannen sehen und es passt einiges darunter. So kommt man von beiden Seiten an die Sachen heran, die drunter stehen
Single part ring to extend a Silvercrest Food Dryer to fit Filament Rolls inside. Could work with other Food Dryers as well. It is printable on large printers only, like the Prusa XL. I created several sizes so you can print the size best…
This is a simple wall mounting bracket for Lidl PS4 controller charging dock. It can be screwed onto a wall, and it latches onto the side grooves of the docking station. It's a rather tight fit, so friction alone is more than plenty to…
verrouillage gaufrier/croque-monsieur Silvercrest Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: noname ABS - PC-ABS Category: Kitchen & Dining
Držák na uchycení- SILVERCREST Soundbar Stereo 2.1 - na vrchní část Tv samozřejmě je nutné si první ověřit rozměry vrchní části Tv. Základní rozměry jsou na fotkách, pokud máte například tencí Tv bude chtít držák doupravit ať už úpravou…
Rough Minimum Viable Product model with snapfit connection to hold an extension cord under the tv table.
soporte para el limpia cristales del lidl…..tambien serviria para otras marcas
Push handle for this kitchen slicing machine. Designed with respect to the original one - minor changes witch can be simply ignored (no improvements). Vytvořeno podle originálu jen s drobnými nepřesnostmi, které lze ignorovat v rámci…
Jde o rozšířujíci hubici na aku vysavač Silvercrest z Lidlu. Nebyla součásti dodání tak jsem si jí nakreslil. Rozměry rozšíření jsou 70x10mm. Tištěno z PCTG ale dá se z čehokoliv
silvercrest Seifenspender Tropfschale
Optimized Silvercrest fan: supportless design with flush blades and reinforced contact surface for better durability.
I built a custom stand for the Silvercrest Lidl milk frother as it didn't come with one. The stand features a tabletop base and includes 6x3 magnet slots allowing it to be mounted on a fridge or any other magnetic surface.
Silvercrest (Lidl brand) tower fan (like Dyson fan) remote holder Easy printing, not need support (in suggested position) Fix on fan, with double sided tape
Holder for SILVERCREST strip with 8 sockets (buyed from Lidl). Print settings: no support required PET-G Category: Parts
Installation: Slide the chamfered side onto the cable winder arm (requires a bit of force) *estimated print time and material usage (P1S; 0,20mm layers height; Elegoo Rapid PLA+; 3perimeters): 22m; +-9g
Designed for trimmer from Lidl (Silvercrest) - simple and good looking :)
The blender is unprotected when the container/glass jar is removed. The blade is open which can be a safety issue. The cap is designed to cover the blade. Infill: 25% Support: No
This is a remix from the very cool holder @kjbturok designed. I resized it to fit the Silvercres Soap Dispenser i bought at LIDL online shop…
A replacement part for Silvercrest SKM 550 B1 kitchen machine / food processor Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: SUNLU PETG Category: Replacement Parts
Die Oberkante schließt bündig mit der Oberkante des Bewegungsmelders ab.
EN: Fixing frame for Kitchen Scale SilverCrest (LIDL) This frame prevents the kitchen scale from falling off the IKEA LACK table. It provides fast and flexible access to the printer without having to remove the kitchen scale from its…
My model is SAS 7.4 LI D3. I printed on the side with supports for strength, 100% infill (I don't think it is needed), 0.2mm resolution PLA. Holds for now. Had little trouble removing the infill from the inside button but it is manageable.
Print with ABS, if you dont want to use support just slice is and ad some plug tipes to put it together.
English : I created this remote control holder for my SilverCrest SSVF 45 A1 stand fan so I can put the remote control on the fan when I put it away at the end of the season, avoiding losing the remote control. It is fixed with a cable…
Pieza de sustitución del cierre de la sandwichera. he realizado dos piezas por si acaso.
Well this isn't really a direct replacement, I put in a 6x AA battery holder and a small DC/DC step-down converter set to 4,5V. For printing you need to support only the small 2 clips and after printing you have to use a dremel or a…
Replacement brush retention latch for Silvercrest SHSS 16 A1 vacuum clearer. Both parts need to be printed with supports. Works well when printed with 0.2 layer height. Category: Replacement Parts
