55 modeli
The team at CMF have provided us with a phone that is both sleek and elegant in design, so why would we want to cover this up with a backplate? Well look no further, this sleek skeletonized backplate adds the lens and magsafe…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
REMIX Skeletonized Dagger two side
Key organizer The key organizer was designed for your everyday life. It was designed to be lightweight and easily pocketable. enjoy! I designed three versions: one that fits two keys, one that fits three keys, and another that fits four…
This is a skeletonized version of the improved k1 toolhead cover This is pretty much as minimal as I could make it while still having the required mounting holes and fan ducts Way lighter than the stock one! Print Settings Tree or Organic…
It's a column of color! Desk light or floor light, your choice, and all you need to light it are generic fairy light strings you can get from Amazon. Each stackable section is made of 3 onion like layers: A thin clear PETG inner sleeve,…
A lightweight, stackable rail riser for your airsofting needs. Asymmetrical, so you can stack multiple of these if you need a longer rail (for scopes etc). Don't want to use supports? Print the chamfered model if you want to avoid using…
Rack And Pinion Skeletonized version
Pretty straight to the point: this plate is skeletonized to save filament. Each plate uses about 75 g of filament. It prints faster with a 0.6 mm nozzle if you have it, but works just fine with other sizes. Use max layer height. Print…
A custom extended skeletonized stock for Airsoft P90s! This is a work in progress. Feel free to download and edit the Fusion 360 file (if you don't mind getting a look at the jank behind the scenes lol). The P90 reference body there is…
A simple minimalist knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825 or…
Sleletonized CW2 inpired by @PowenChi_1306772 versions of the cw2, but made from scatch using the original newest motor plate and the filament sensor version of cw2 linked as remix. The Stealthburner on the picture is this one. I might…
I wanted a printable M3 balisong that flips pretty well and uses the M3 hardware I have on hand, so I made it! Demo here: Printed in California Filaments Cloudy White PETG and Overture Cream Light Blue PLA (now removed). Parts The needed…
This is a skeletonized version of the newest release of the dwarf connector base. Please check this knowledge base link for assembly instructions. You will need to print the new connector cover as well. File is reloaded here for…
My magnum opus. A skeltonized case for the flipper zero featuring cutouts for all ports. This case was one of my first designs so sorry if its a little janky. PRINT WITH FLAT SIDES FACING THE PLATE. Infill: 100% Supports: YES Adhesion:…
This is my Skeletonized Print in Place V-Twin Engine! Check out the video on how it works, and how it was designed. See how it works!: https://youtu.be/ZJz_8yNxHX8 Don't like the look? check out the original:…
please like + upload makes guys :) skeletonized version of the original model. improves thermals a bit + looks awesome! printed at 30% infill with PLA. any filament will work fine as it's not near any hot parts. *edit: The included photos…
SV08 Custom Toolhead cover and BTT Eddy mount. Current version: 0.2 Part List: 6 - M2.5 Heat set inserts. 1 - 5020 Fan (SV08 stock fan works) 1 - 2510 Fan. 2 - M2.5 x 25MM screws. 4 - M2.5 x 12MM screws. 3 - 4x3MM magnets (same as stock).…
A remix of Liselotte111's hexagon door cover with an added 3mm thermistor clip for the chamber temperature.
I found it strange that a blower style card wouldn't have skeletonized back bracket so I made one add tree supports and have fun
A Combat ButterKnife that is skeletonized to reduce material. If there are any knife designs or other tools or cosplay props you would like to see, please message me an image and i will design it.
A minimalist skeletonized knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5…
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
This is a (more) skeletonized version of the drawer housing for Littlefiver's Ender 3 Double Drawer - https://www.thingiverse.com/thing:3372977 I cut holes in the drawer housing, as it takes a very long time to print, and the only surface…
Tall hex-skeletonized case for pencils, toothbrush, or other tall slender objects.
MLOK Mounted skeletonized angled foregrip for airsoft purposes
I saw Optimum Tech’s video on making his own lightweight wireless fingertip mouse (linked below) and decided to do the same. Before I made my own, I tried @crbn_559839 's fingertip Orochi (linked below), which showed me this was something…
The Finger hole is the average male ring size of 20mm diameter like oryginal.
Added Cat Ears to my LightWeight Clock Work 2 Mod.
Super lightweight Esper filled with holes all over the place. The trigger is not the same as the picture. There is a shim piece included for the grip area and I stacked e-tape layers to make it not flex when priming. Other parts not…
Update 12-17-20: Added a missing hole in the right side of Magback2. Update 12-3-20: Renamed the buttcap and buttplate. Fixed an issue with the Magback2 print being too short on the mag and causing the ram to droop. Added stock spacer to…
This is a set of Cherry Mx compatible key switches. I didn't want to give up any potential RGB capability in the keyboard so I skeletonized them. they are a little bit of a tight fit but they do fit. 100% infill and .2 layer height. No…
I suggest printing with 100% infill for maximum strength. There are 10, 15 & 20mm depth versions available. All versions are 15mm wide (you can scale them easily in the slicer to match your needs) If you need other dimensions, feel free…
The NTE Series 2.0 is the second revision to the NTE platform and fixes a few of the problems with the original. NTE is a half length, T pull blaster that functions similarly to Taffy's Skewer. CHANGES (compared to 1.0) -Rambase now uses…
This original model is cool, but I wanted to make a few mods. The model is now skeletonized. The model is rotated for dropping onto a printbed. The model now has small chamfers on the bottom to help hide "squishing" in the first couple of…
It is the maximum size of plate that my Bambu P1S can print.
Print all the files from the PKI RR Skeletonized LYNX , except the shroud and spacer (print my stock file too if you have issues with the ram seating but keep in mind it's not perfect yet but has never failed me). Please print the tall…
skeletonized volcano parts
MLOK Mounted skeletonized stubby foregrip for airsoft purposes
Skeletonized handle for custom screwdriver. You can get the screwdriver shaft from cheap T handle screwdriver from Tesco. Just melt and cut the T handle and get the shaft out, then glue it into the inside holder.stl and glue another…
I wanted an oxygen wrench slim enough to fit in an empty shears pocket on my uniform pants, and long enough to leave a decent bit of the handle poking out to grab. None of the others I saw did both, and this also served as a good way to…
opened all the holes/fully skeletonized
Update 10/26/26 : Breech load version added to the files. Models are print oriented and do not require support. No blaster disassembly or modification required. Filament Elegoo PLA Plus (Red)
The provided files only support the O3 Air Unit, this is a mount for the O4 Air Unit Pro. Friction-fit, but a strap through the existing holes should work. I'm just a beginner with CAD so may need a touch up by someone more experienced.…
This is a small project I made to try to design a skeletonized fingertip mouse that properly fit my hand. It's based off of my grip points on a fingertip mouse which are pretty unique so this mouse won't fit everyone. The final weight is…
i added some holes cus i thought it would be cool. you need to add some extra support to make it look good. at least i had to. the hexagonal hole for the solenoid nut is made 14 mm instead of 12 mm, face to face.
Skeletonized AlcatelU5OT-5044T case Added a slightly bigger mod file. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.4 Infill: 0% 360 Category: Mobile Phone
Print with 4 walls and 30% rectilinear infill. This design is strong in compression and will resist bending. By removing the ducts this remix should improve airflow at the back of the toolhead which is already cluttered by the jabberwocky…
This is the same outer profile as the original, the hex cutouts reduce filament needed and makes it print faster.
Print with 100% infill, I used PLA but you could probably use anything. The fit is quite snug inside the slot when you put 2 together. Original design by mybainwaves.
This is a lightweight fingertip shell for the Razer Orochi V2, and an updated version of a previous upload of the same project. As far as weight savings go for the shell itself, I don’t think I there's more than a decimal of a gram left…
i added some holes cus i thought it would be cool. you need to add some extra support to make it look good. at least i had to. the hexagonal hole for the solenoid nut is made 14 mm instead of 12 mm, face to face.
Pretty straight to the point: this plate is skeletonized to save filament. Each plate uses about 75 g of filament. It prints faster with a 0.6 mm nozzle if you have it, but works just fine with other sizes. Use max layer height. Print…
These are just remixes of Igniz's models. I made them because I had a specific project I was working on and wanted to "skeletonize" some of them. The "project" was a set of rifles, each with slight variations, such as different length…
![Modular Organic Skeletonized Light Column [No wiring project]](https://media.printables.com/media/prints/337306/images/2886454_08a6224e-89e7-44a1-9d3a-8cfe055ff77d/square-1.jpg)
