56 modeli
This is a model of a cuvette adapter for CD, fluorimetry and absorbance measurements with 5mm optical path and dimensionThis is a model of a cuvette adapter for CD, fluorimetry and absorbance measurements with 5mm optical path and…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Sunshine 101 is a Spectroheliograph (SHG) based on 2pcs of CS lens 75mm F/2.8. It was optimized for Sun photography on Hydrogen Alpha absorption (Ha) line. It's required some mechanical parts from standard telescope accessory and easy to…
About a year ago my brother, who is finishing his PHd in Physics, approached me about designing a housing for an affordable spectrometer for use in a classroom and that could be utilized for low grade lab use. It primarily utilized an…
3D Printed Spectroheliograph . This model is currently a working draft. Solar astronomy has inherent dangers, please be sure you understand these (see also below). Use is at own risk. More general information about this approach to solar…
Introduction There are lots of spectroscope designs on the web but most involve dissecting a CD or DVD to get a transmission grating. I wanted to build one into which one could just drop a standard DVD and get it to work. I also wanted…
Simple but useful spectroscope. Designed to work with diffraction grating slides,but works very well also with DVD pieces. To be printed vertically. Support is not required but recommended. You have to use a non transparent filament.…
Students print individual parts, made using 3D printing, and assemble their own spectroscope. This can be used to observe the decomposition of light, as well as to manually measure the wavelength.
A rugged and accurate spectrophotometer that students can assemble, transport between home and school, and use in combination with their own smartphone. It stands straight up, facilitating various types of experiments, and using a soft…
I created this files after seeing this little foldable spectroscope - https://publiclab.org/sites/default/files/8.5x11mini-spec3.8.pdf Category: Physics & Astronomy
A simple and easy to use design for a DIY spectrometer. The components are a handheld spectroscope, USB camera, 6-22mm M12 lens, M2 bolts and a 3D printed structure. If you don't have a 3D printer , you can Purchase Printed Parts from…
Tray (relatively heavy for stability) to work with spectrophotometer cuvettes. Mostly, for use as a stable basement for cuvettes for work within an anaerobic tent. Each slot contains an additional notch to be able to accommodate the…
Printing these designs requires supports. They are oriented so that the internal baffles are printed without requiring supports. Two small blocks were added to the retaining clips as support. These have 0.25mm offset to simplify their…
This is my version of the optical spectrometer that is described by open source Theremino system . The excellent guide in the Theremino description uses a wooden enclosure painted black inside. I opted for a black ABS plumbing pipe with…
This spectrometer is small enough to fit in your pocket and can be used on your mobile phone with a web based spectrometer like spectro-web . I also added a case to protect it from dust and scratches. I recommend to try the 0.6 mm slit at…
OpenSpectrometer v5 The OpenSpectrometer project aims to bring low cost, high accuracy spectroscopy to everyone. Simple, but functional spectrometer on a 3D printed base with +/- 1 nm accuracy. Carriage allows diffraction grating to…
A printable mounting system for the pySpect project. It can accomodate 15 mm or 25 mm spectrometers and a camera with a M12 lens mount. for use with https://github.com/leswright1977/PySpectrometer2 The Camera mount holder is a press fit…
This is a replacement for a Sachs Spectro S7 cover. I used this linked document as a design base. 3D-Model
Configuration of UC2 cubes and inserts for spectrometry with a USB Fiber spectrometer. UC2 inserts include a holder for cuvettes, a light screen to protect cuvettes to be illuminated on their sides, a self-centering holder for an LED…
Having recently acquired a Radiacode RC102 portable radiation detector it became necessary to fabricate some fixtures and accessories. This kit is comprised of: a shell to hold the Radiacode sensor which is wrapped in 4.8mm of shielding a…
Scale Sciex 6600 Mass Spec. Prints in 4 parts that are glued together. Category: Engineering
A lowcost (ca. 10€) but rugged spectroscope based on a folding kit made out of paper. You'll need a kit of “Das Handspektroskop” by AstroMedia per spectroscope. Instructions: (The kit you'll need comes with a set of instructions in german…
Isn’t technology amazing. With two mirrors, diffraction grating, a 3D printer and a camera, it is possible to see stars made up of. Even that they are light years away. The mounts is E-mount to 1,25'' telescope Unfortunately was mine…
OpenSpectrometer v1 The OpenSpectrometer project aims to bring low cost, high accuracy spectroscopy to everyone. Latest version (5) with wider spectral range see: https://www.printables.com/model/848851-openspectrometer-v5 This is a 3D…
You can see the full build process on my blog Print Settings Printer Brand: Anet Printer: A8 **Rafts:** No Supports: No **Infill:** 80% or higher for case, 20% for other parts Notes: Use black or another dark fillement as to prevent any…
This redesigned Pioreactor is tailored for enhanced spectroscopy and fluorescence applications. It features three lateral holes on each side to accommodate 1.5 mm plastic optical fibers for excitation. At a 90° angle to the excitation…
This is an updated case for the Little Garden Spectrometer by Lao Kang found on AliExpress. The model is one inspired by Project 326's YouTube video on upgrading the spectrometer, I reached out to try and get them to send me their model,…
Prism holder for spectrometer tables to align prism to centre. Customisable to size of prism and table.
Updated: The bottom cover now has 2 versions. The TPU version has tighter tolerances so when printed with TPU it will hold itself in place.
A simple stand for my Canberra / Bicron 5H5. Designed with a 5 cm high sample chamber
https://www.shelyak.com/wp-content/uploads/DC0018B_Doc_Alpy_Calibration_EN.pdf
MrFox stumbled upon Les Wrights brilliant spectrometer project and couldn't resist the urge to make his own version, including an M12 to C-mount adapter ring.
Support Tubes de spectrophotométrie pour 5 tubes
Thanks to this holder, you can fix Ocean Optics spectrometer to any board. I used mini foam tape to make it tight and absorbing vibrations, but it is not necessary. From the side there is option for inserting a press nut (M3), then USB…
A model to hold your spectroscope and Pi cam for Les' Lab's Pyspectrometer project and a cover for you spectroscope when not in use. Pi cam holder mounts with 2 m3 heated inserts and screws Pi cam itself is mounted with 4 m2.5 heated…
Designed for a chemistry research project. The design consists of a nozzle for a transfer line. The bottom hole is for a heating coil while the other is for a thermal probe.
The use of semi-rigid or heavy SMA cables with the Spectronix Eye-BERT 100G (100416A) can put excess strain on the SMA solder joints inside the Eye-BERT 100G. This simple cable guide clips to the sides of the Eye-BERT and helps prevent…
TLC Sample Plate Holder for Scan-RAM Spectrometer TLC sample plate holder optimized for the Scan-RAM Spectrometer. Featuring three interchangeable plate configurations, it accommodates various sample sizes. Plate sizes Plate Size: 20x110…
This cuvette holder was designed to fit in a Perkin Elmer Lambda 365 UV/Vis spectrometer for single and double light path measurements with cuvettes of variable path length of up to 100 mm. It can easily substitute the standard Single…
Designed to provide a robust way to hold the glass lid of a mass spectrometer for easier operation. For a safer installation, mirror the part and install the holder on two sides.
The colleague cultivated anaerobes in large Hungate tubes and needed to measure the optical density of the culture without opening the tube. The available photometers were unable to accept the tube with culture as is or to protect against…
I made a TPU case for my spectroscope purchased from https://www.patonhawksley.com/product-page/benchtop-spectroscope . I used Fiberlogy FiberFlex 40D and initially, when I was screwing on the cap, it made squeaky noise, so I lubricated…
This model is a miniature version of a Nuclear Magnetic Spectrometer magnet. These devices are used in chemistry research for analyzing the composition of samples, among others, but are very similar in working principle to MRI machines…
Print in black or dark filament or paint black . There is an spectrometer app for measurement like Spectrograph, PocketLabor or Open Spectrometer CD must be cut out with regard to concentric lines of the disk and inserted in.
The use of semi-rigid or heavy SMA cables with the Spectronix Eye-BERT Gen2 (100381A) can put excess strain on the SMA solder joints inside the Eye-BERT Gen2. This simple cable guide clips to the sides of the Eye-BERT and helps prevent…
Stojánek pro 12 pozic kyvet (24 mm vnitřní průměr kyvety) pro EDX (RTGf) XEPOS od firmy Spectro. Kyvetky stojí pouze na hraně plastu a podložka nijak nepoškozuje polypropylénovou fólii.
This extender cover is designed for the use of custom or long-neck cuvettes in the sample holder of a Perkin Elmer Lambda 365 UV/Vis spectrometer. It replaces the original lid and has overlapping sides so that no light is scattered from…
The screen cover snaps onto the face of the Eye-BERT Gen3 to protect it from damage. Print with the Spectronix “S” down using PLA at 100% fill, no supports. www.spectronixinc.com/ProductFiles/Eye-BERT Gen3 Data Sheet.pdf
This is a model of magnetic disc holder for spectrometer (Optical Emission Spectrometer for elemental analysis in oil ) like Spectroil M/N. Desiged with pockets for use with 3 of 10x2mm magnets. If you want to put magnets inside just make…
Print-in-place gamma spectroscopy castle to be filled with lead shot. Cylindrical 100x100mm internal volume. 3cm of shielding, which provided me a 93% reduction in background gamma count rate. Includes a cable passthrough, optional…
A Jubilee tool compatible with Science Jubilee that houses an Adafruit AS7341 10-channel light/color sensor breakout
This adapter can be used to fit a Kessil PR160L LED lamp into a PerkinElmer FL6500 fluorescence spectrometer. I've built it for the long-time irradiation of a sample in solution in a cuvette. The cuvette holder needs to be printed as well…
A Jubilee tool compatible with Science Jubilee that houses an Adafruit AS7341 10-channel light/color sensor breakout
OpenSpectrometer v5 The OpenSpectrometer project aims to bring low cost, high accuracy spectroscopy to everyone. Simple, but functional spectrometer on a 3D printed base with +/- 1 nm accuracy. Carriage allows diffraction grating to…
OpenSpectrometer v1 The OpenSpectrometer project aims to bring low cost, high accuracy spectroscopy to everyone. Latest version (5) with wider spectral range see: https://www.printables.com/model/848851-openspectrometer-v5 This is a 3D…
