131 modeli
Hoth Snow Speeder ATMOS Cooler Badge. + Solo Hoth Snow Speeder. USE AtmosSnow for Cooler badge.
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 After designing the millennium falcon and tie interceptor kit cards, a coworker suggested I try a landspeeder. This was made to fit together when printed on my…
3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…
V1.4, 16. Aug. 2024: Minor changes to the simple base Minor changes to the display V1.3, 20. Dec. 2023: Simple base added V1.2, 19. Dec. 2023: Shorter lever rods Shorter lever handles Panel added V1.0, 17. Dec. 2023: first release I…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
this is a v2 for my previous design Flsun v400 Speeder Pad Display Holder Upgrade after v1 these are the new features to the new design: more robust holding less material better cooling : spacers in the back of the screen more air way…
A big thanks to Richie Rakete for taking on my model and splitting it up for easy printing. Richie emailed these files mid last year and I thought he was going to post them. I had since forgotten about this model but thought its well…
A single-piece, easy-to-print, holder to mount the speeder pad to the extruded rail of the printer. Pro Tip: Route the cables through the device so it's a little bit cleaner.
This is a lower profile mount for the v400 speederpad to mount to the chassis rather than on it's (actually really nice) stand. The bare, shaped mount ( V400 Attachment / Mod Starter ) to fit the chassis was by Trayal on Thingiverse:…
High Detailed Model kindly shared by DrMcKay. Cheers Jace
This is a set of blocks that can be used to recreate the Speeder Bike and Scout Trooper from set 7128 at 500% scale. The stl files for the parts have all been organized into folders to make them easier to find. Please use the following…
This is a remix of this awesome model : https://www.printables.com/model/375326-flsun-v400-speeder-pad-display-holder-up I replaced filets by chamfers. You can now print without supports :) You can print files separately or directly the…
What is it ? This is an IPSC competition shooting belt adapter for affordable Cytac brand F-Speeder series of holsters. EDIT 11.4.2022: Added a Tri-Spacer that you can use instead of the regular holster spacers Different files Laser-cut…
⚠ UPDATE ⚠ Following numerous feedbacks, I upgraded the upper and lower shell in a third version (Flsun Speeder Pad V3). In this version the tolerances are softer and reinforcements have been added to make the body more solid.…
I like the original design but there was no tilt in the holder. Added about 10 deg tilt to the holder. Rounded the curves for the brackets that clip on to the V400 frame. Extended the portion of the bracket that has the dovetail receiver…
Split STL in separate parts and print as needed. Layer hight around 0.2 mm. The green marked part needs some support, others print with no support.
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Yah so kids.. and small electronics…. need I say more? I couldn't find something that was beefy and easy to make. I didnt want 700 knobs and crap to mess with. If thats your thing, this aint for you. I made and included a mirrored version…
This is a remix of the stellar model by fixumdude inspired by the X-34 Landerspeeder Luke pilots in Episode IV. Added a few cutouts on the top panel of the speeder to allow for easier coloring. Printed and sliced on Bambuslicer using a…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
LEGO Star Wars Landspeeder
A quick and dirty remix to move the pad away from the center to prevent collisions with the print head at it's most forward position. Printed with Inland PLA+ and snaps on nicely. I also printed several of the cable management straps from…
I saw 2 models that had great features but thought they would be better together, so this is my remix. The pad is slightly tilted to the right (not much, this just fit my setup best) I printed in PLA+ 0.2mm layer height and it works great…
The original file is a speeder pad holder for FLSUN V400. All works well for the SuperRacer except the bracket for the printer side tower. The rest of the holder can be found here:…
The Biker Advanced Recon Commando (BARC) speeder was a speeder bike manufactured by Aratech Repulsor Company.[1] It was designed for use by the Galactic Republic's Grand Army during the Clone Wars. Length 4.6 meters Category: Vehicles
I’ve upgraded my Flsun SpeederPad with an RJ45 connector for ethernet access. Works perfectly, just need to solder a PCB connector. Ive designed a new case to allow access to the new RJ45 and also to the 4th USB port, USB OTG and 3.5…
Removed front emblem. Added reinforcements to sides of both backs to prevent flexing. Added new flap design with coarser slots. Moved the OTG and SD slots 1.5 mm for better appearance. Also moved these parts on the PCB. Larger screw holes…
This model, in my opinion, should be rotated 180 °. Added a cutout for the power cable. Huge thanks to JLCURTIS and Yosi Yaffe for the models!
This design allows you to wall mount your Lego Star Wars UCS Snowspeeder horizontally or vertically. The peg that replaces the Lego stand has quite tight tolerences as I really don't want this thing jumping off the wall! Depending how…
This is a case for the Diablo SpeeDemon spade bits since they did not come with a case, im sure they would fit any spade bit set this is just the set i have Print instructions i printed it at .3 DRAFT settings just because it doesnt need…
Flsun V400 Speeder Pad top mount enclosure compatible end cap
La modif sur le boitier pour speeder pad est de pouvoir le mettre à droite ou à gauche de l'imprimante et d'avoir accès au port usb4 et rj45 pour l'écran Wimaxit il est monté sur ma SR carte mère Manta et BTT CB1 sur le pour HDMI
===== FR ===== Voici ma version de fixation pour le FLSUN SPEEDER PAD . Articulé, et orientable afin de le positionner au mieux comme on le souhaite. Se monte dans la glissière de la FLSUN V400. Le Speeder Pad se glisse dedans. L'arrière…
Another awesome model created over at the 3D warehouse https://3dwarehouse.sketchup.com/model.html?id=723f13f70b2132413c5a70503dac4f1d Cheers Jace
Take out the two screws on the back of your Speeder Pad and replace them with a bit longer ones. Also replace the front M3 bolts on the top plate of your V400 for longer ones so you can mount the bracket. Melt three insert nuts in the…
Replacement Kenner ROTJ Speeder Bike Handles As featured on Toy Polloi YouTube Channel! http://youtube.com/user/toypolloi/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ELDn0hmhOT Print Settings…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2015: Found this (Playskool) Snowspeeder at a thrift store that was missing a windscreen. After modeling and printing one out, thought to myself, "you know, I…
I'm a huge fan of the BigBricks designs created by Jacob Hardwell. After making the Scout Trooper model, I wanted to create a speeder bike to display him with. I found a set on the Lego website that did not look too complicated which…
The "speeder-FDM.stl" model can be scaled to the desired size and then divided into objects. Each part can then be printed with fewer supports and a better result. There is a gap of 0.2 mm on all sides between the parts that fit together.…
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
I looked for a better way of mounting the Speeder Pad on my FLSun V400. Thats what i use for now. Printed with PLA+, 50% infill and triangle pattern.
A modified version of the original front cover for Commodore 1541 II with MeGALoDOS Multispeeder. Modified for 0.96" OLED display and rotary encoder. The front fits for models with CHINON drive and together with the original case parts.
A 3D-printed speeder bike model inspired by the fast and futuristic vehicles seen in the Star Wars universe. Its detailed shape and sleek design make it a great display piece for a desk, shelf, or collection. The model looks especially…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver A - dot pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap. The little one connects…
I haven't printed or tried this yet.
A simple merge of the two designs.
I wanted my Luke's Landspeeder set to be at a 45º angle and didn't want to dig through Lego bins to rebuild the stand so I just threw together this little piece to slip in between the model and the stand. Depending on how you place it on…
FLSUN Speeder Pad Stand super easy to print and realy lighthweigt, I printed it in PLA and it worked out just fine
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
I needed a speeder pad holder that would fit my needs so i designed one about 3 months ago and have been using it since, no problems with overheating like some other deisgns seems to have caused for people. nothing special but works…
And now for something completely different! Darth Maul's speeder from Episode I for 1:12 scale figures! Like my lightsaber models, this is split into separate parts for easier painting and realistic part lines. Each part is in the…
IT'S BIGGER Using Jon Lake 's remix to make the arms glued/press fit on. Original from StrandedOrg .
Mount for securing the Speeder Pad tablet onto the FLSUN SR printer. It's attached using a standard screw into the designated hole on the printer's top. For best results, consider printing it on its side to minimize the need for supports.…
Elevate the way you display your Lego creations with this custom-designed wall mount for the Lego 75259 Snowspeeder 20th Anniversary Edition. Meticulously crafted for Lego enthusiasts and collectors, this wall mount is engineered to…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
I wasnt happy with the existing models, none seemed to be that compatible with my enclosure. So I decided to make my own standing on top of one of the frame's profiles but being able to adjust the angle. As I'm lazy I didnt redesign the…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver B - easier to print solid line pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap.…
Because I needed one place for all accessories plus 1 SD and 2 micro SD, and hide accessories behind the speeder pad I did remix and create this new version. I hope you all will enjoy it Remix with modification of: Flsun V400 Toolholder…
Speeder 1 Variant 5 is for the Christmas print drive. feel free to print this to your hearts content UPDATE : ADDED Bulk Print files depending on bed size 310X310 bulk print file and STL Anet e10 bulk print configuration
This ultimately became a freelance design based on American rail speeders/motorcars. I designed this to resemble the one once used within Union Pacific. the most significant change I made was the sloped front. feel free to use it however…
Bottom mounted Cannon for Kenner Speeder Bike ROTJ. I used a microscrew that had a 1.4mm thickness and a screwhead of 2mm for the fixing stud for conencting to the main body (2mm x 1.4mm x 3.8mm). I bought "1000 tiny micro glasses screw…
Este modelo esta en proceso de terminar, solo falta hacer los tornillos de subestación del holder. Se puede usar metálicos, la idea fue tomada de un creador para usar todos los puertos del pad y de paso le mejore la ventilación con un fan…
My kids have a Radio Flyer Landspeed that I made a little faster. On the maiden voyage, my 4yr old drove it right into a curb in the neighborhood which immediately sheared half the teeth off of the pinion gear in the right side…
That speeder that sat outside the Cantina, this is a scaled up version and hollowed out. I've added some of the greeblies, not all as there seemed to be a couple at the top but cant seem to find a clear view of them. It's not to any…
since I have broken the stand that came with the V400 I wanted to clean up my desk a bit.. and practice drawing, so I made up this bracket to mount the V400 pad to on the extrusion of the printer.
This Model is a Mini version of an AT-ST & Snowspeeder thats why I made this model. To bring the charm by small Brick Sets into bigger spheres. The Model can be printed in place and requires no building. Supports should be used otherwise…
This is my interpretation of Rey's speeder. Printable probably only sla. In time, I may try to adapt the model for FDM printing. Printable on a larger scale on an fdm printer, see photo Ver. 4 - Added a few details, control panel...
This Model is a Mini version of a snowspeeder which was mainly seen on Hoth in the 5th Movie thats why I made this model. To bring the charm by small Brick Sets into bigger spheres. The Model can be printed in place and requires no…
Inspired by the Speeder Pad Holder of ShriMPs666, I designed my own version of it from scratch, since theirs is for a V400. I added a small version of the gripping part for you to test out, if the print fits in the provided size, it may…
Rebel Transport Speeder Micro Galaxy Squadron Scale
Had been using JLCURTIS's V400 Speeder Pad Adjustable Arm Mount but when I got the FLSUN v400 Enclosure it was no longer compatible. I had to find another method of mounting the speeder pad because the enclosure panels utilize the column…
Based on Nilo Rodis-Jamero concept art. I had to try to model this to see it in 3D. The most difficult part was the storm trooper though. Still have to finish the paint and weathering. Curious to see what the more experienced star wars…
Gedruckt in PLA+ schwarz, Layerhöhe 0,2mm. Kein Brim, keine Supports erforderlich. Zur Befestigung werden jeweils sieben Stück Messing-Gewindeeinsätze M4x8,1x6,3 sowie Tellerkopfschrauben M4x12 benötigt.
Elevate the way you display your Lego creations with this custom-designed stand for the Lego 75259 Snowspeeder 20th Anniversary Edition. Created in Fusion 360, this design is a must-have for any Star Wars Lego collector. You can choose if…
Update 28/07/2024 I decided to redesign the main stand for the V400, because after a few months the T-slots on the previous one were breaking. So this one is the new support (V400Support_v2): In 1, you can reuse the standard V400 M5…
Praxis Mk. 1 Turbo Speeder, An elegantly designed Turbo Speeder, The Praxis Mk. 1 is piloted by members of the Jedi Order when traveling around the city planet of Coruscant. Its thin wedge like design cuts down on wind resistance and the…
I did this for myself for training purposes. If you print it at these dimensions, you'll need to make the speeder pad a little slippery (I used a drop of dish soap). And to get it back - you have to cut it out. It might help to print it a…
A cool model of a star wars speeder. For all star wars fans.
Wall mount for the Wiha speedE® II charger. I printed it with PETG, 0.2mm layer height, 3 walls and 10% infill. The charger can be clipped in easily.
The driver stand is angled fairly shallow, to keep it with the 2x2 / 1x2 envelope, even if a bit is in the driver. Two models and their Fusion base files included, v1 with the bit storage, v2 without. V1 could be modified to take more…
Fly and speed through the Crash Derby board game with this replica model of the Land Speeder driven by Luke Skywalker as seen in the original Star Wars. I remixed the model from the prolific Jace1969 to make one suitable for a smaller…
this is a remix where I took two already great models and combined them so I could have the features of both.
This ship model is exported from the following animation, made by me: Exporting this ship model took a lot of work! But here it is for your Sci-Fi figurine collection, in case you want a fun little ship to gift to someone. Enjoy!
This is the ride vehicle featured in Star Tours and Star Tours: The Adventure Continues. I printed it at 0.15 layer height. As it is, it is a bit longer than 2 inches.
Eine Halterung um den Displayhalter an eine Arbeitsplatte mit ca. 40cm Dicke zu montieren.
Casing pour le Speeder Pad de Flsun. Il y a des places pour mettre 7 aimants de 10*10*4 afin d'avoir largement assez de force pour maintenir le Speeder Pad en place sans soucis sur une surface métallique. L'impression en TPU est fortement…
A creative model of a star wars land speeder, from the clone wars.
Modified to be interlocking and attachable to 1980 Kenner Snowspeeder. Also comes with additional accessoires (Blaster, and Harppoons) that can be hidden under a fake bottom. Harppons and blaster cut in half (I used glue to put them…
Eine einfache Halterung für das FLSUN Speeder Pad um es an einer IKEA Skadis Platte zu befestigen. Ich habe mit Brim, Supports und 15% Infill gedruckt. Wer mutig ist, lässt Brim und Supports weg.
Is your emergency speeder missing a decorative bar? Print instructions I found the best results were with a raft 2-3 layers and supports. I tried printing vertically but the clips just broke.
It's a simple mount. Print with supports. To mount it to the printer you need 2 M3x8 Screws and 2 M3 slot nuts.
Speederpad mount with a slight angle
a toy for the Christmas drive event. Currently in the Alpha test Phase UPDATE: I had to tweak the rear end of the Ship.
General: Wanted to have the speeder pad on top of the printer and train fusion Still WIP but working for me (see pictures) Top Mount for the speeder pad 3 Parts can be printed without support Requires one 90mm M5 Rod Please clean the…
