Liczymy pasujące modele…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
This split-flap display sets itself apart by being almost completely 3D-printed. The flaps are printed by changing the color mid-print and mid-layer. The case is also completely 3D-printed. Video of the display in action (with sound):…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
[ Information ] A sister model of this “Split Ring” is available on the following page. “Oval Carabiner (7 sizes)” 2 shapes and 6 sizes each. A removable ring that is harder to use than carabiners. But I wanted something sturdier with a…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A display stand for 4 folding or small fixed-blade knives. Comes in two versions, one "hollow" (blue renders and photos) and one solid (red renders). Print instructions At 100%, both versions come up 75 mm wide. Prints on its side without…
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Wydruk około 5,17 €–6,32 € nettoWstępna wycena jednego wariantu
This is an X-shaped book stand/display designed to be sturdy and cheap to make. Just print it out and slot sides A and B into eachother. I've included a second stl that shows what it looks like assembled. 70% scale (shown in the photos)…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts. A single edge razor blade is used for the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This splint prints flat and can be easily molded to perfectly fit your wrist with a little heat (hot water, heat gun, oven, etc.). It is designed to comfortably immobilize your wrist, preventing ulnar and radial movement, while still…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Inspired by a few other similar designs, this little legged display stand can make presenting those special Easter eggs for the holiday even more adorable! Done in "two colors" so you can give the legs and feet a more traditional foul…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
Wydruk około 5,70 €–6,97 € nettoWstępna wycena jednego wariantu
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena jednego wariantu
Finger splint I created to treat a mallet finger injury. Has a slight angulation to promote extension of the distal interphalangeal joint while healing. G-code is for PLA and includes removable supports.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Remix of AJsRaceway's Minifigure Display designed to hold and display LEGO Dimensions models on their RFID tag bases. The depth of the hex perfectly matches the diameter of the Toy Tags so these are 100% compatible with AJsRaceway's hexes…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert the tab into the notch to the bottom, then pull to secure closed. PLA, no supports. FreeCAD file included.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Cosplay Helmet Wall Mount for all kinds of helmets for a no visible organization display. This was heavily inspired from Bob's video from I Like To Make Stuff YouTube channel: You can use a piece of felt, rubber, foam or sponge to protect…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a slightly bigger version of my artisan keycaps case, which can found here: https://www.printables.com/de/model/136360-artisan-keycap-display-box Each spot is 19 x 19 mm and is printed in PLA layed down with no supports. Layer…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…
Wydruk około 6,29 €–7,68 € nettoWstępna wycena jednego wariantu
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Wydruk około 8,25 €–10,08 € nettoWstępna wycena jednego wariantu
Remix of YZC DESIGN's earring stand. Holds 5 pairs of earrings on each row (or 10 if hung in pairs) Taller and more dramatic angle to hold longer dangle earrings Crossbars print at 0.25 layer height. The crossbars are the EXACT size to…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Finger splint
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
A Minimalistic and Super Fast Print to showcase your Pokéballs by @yoyothechicken
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Text is printed separated and inserted in, made for a cleaner product. Recommended printing in a PLA Silk for the best results. Text is printed upside down (only if you have a smooth print surface). Print files are customized temperature…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Este es un remix de “Airatius” : www.thingiverse.com/thing:2961210 al cual le hice las siguientes adiciones y modificaciones para una mejor usabilidad. Base: Creé el agujero para colocar un interruptor. Creé un agujero para introducir el…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Monkey Skull Chalice. HOW TO VID.
Wydruk około 14,90 €–18,22 € nettoWstępna wycena jednego wariantu
A display stand for your Fanatec Formula V2 or V2.5 wheel. No supports. Printed in Galaxy Black. Can also be printed on a Prusa Mini.
Wydruk około 2,90 €–3,54 € nettoWstępna wycena jednego wariantu
Scaling is not advised , but if you do, scale the characters also. I added a BLANK PIN so get to work on the REMIXES! All the characters are individual, so you can print any phrase. Print Grid Board in 1 or 2 colors with easy filament…
Wydruk około 5,30 €–6,48 € nettoWstępna wycena jednego wariantu
I have collected Battletech miniatures for many years now and even though I do not actively play at the moment, I wanted to see my miniatures on display where I could enjoy them. I didn't want to do a basic shelf system…I wanted something…
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
90 Degree track pieces that allow you to connect two of the Hotwheels Track Displays (https://www.printables.com/model/778227-3-tier-hotwheels-track-display) together forming a mega display that can hold 42-44 cars!!! fast and easy to…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Display the puck not the holder. This low-profile holder is perfect for mounting hockey pucks to walls or plaques. Features countersunk screw holes for mounting. Designed for Multi-Material printing but this could also be printed with one…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print the base solid and if you have issues with you cup leaking, add a height range modifier in your slicer that just covers the base (1.8 layer height) and enable ironing. cups usually don't leak through walls but more commonly through…
Wydruk około 15,19 €–18,56 € nettoWstępna wycena jednego wariantu
Even if my physiotherapist said it's cool, it's not a certified medical device, but it worked for me. It's a light splinter that I designed for a jammed finger in order to avoid hitting stuff and feeling pain. It printed really fast, just…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Optimized version of https://www.thingiverse.com/thing:39105 Different parts split in different bodies Bottom of car body flattened Rescaled, and multi-layer height optmization in the print files. Copyright 2014 GlenJohnston
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
A small display shelf I created to display some custom circuit boards for a tech expo. Two-piece design.
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Make a motorized rotating display stage with your printer + off the shelf hardware. I printed this in ABS and tested it to about 190 lbs! Affiliate Amazon links for the parts I used: - 8 inch ball-bearing lazy Susan:…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This is a simple wall-mounted display for an individual 3D Benchy boat in profile. It will nicely fit a strip of 1" double-sided tape on the back to mount it to the wall. It should print fine in the given orientation with no supports.…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
I had some issues with the original when I tried to print the hilt and Blade in 2 colors this remix fixes that. Print Hilt upside down no need for support but it doesn't hurt if you want to use it. Print blade vertical with support. .6…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
-new version available (name: Shoe-display-stand-new ) -make sure to print it with a brim
Wydruk około 4,74 €–5,79 € nettoWstępna wycena jednego wariantu
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
1/64 Diecast Car Display Stand: Compatible with Hot Wheels, Matchbox, and More! Fast and Easy Printing.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
I recommend printing with a brim to prevent this model from popping off the bed during printing. If you appreciate the model Consider… buying me a coffee . If your from New Zealand and want to support me and or want a quality guaranteed…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
I wanted to utilize better the space I have to display the model cars I've built over the years. I also wanted to work within the constraints of the MK3 printer, which meant parts couldn't be larger than I could print in that volume. So,…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eher kleines Modell für eine Fingerschiene. Sie kann in heissem Wasser weich gemacht und am Finger angepasst werden. Material: PLA Massive Schichten: 0 Konturen: 2 Schichthöhe: 0.15 Infill: 20% Füllmuster: Bienenwabe
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Yor Forger Assassin Cosplay Set. Some of the .3mf files have split models with premade dowels and holes. gcode files have been arraigned for best printing. But may not be sized correctly for your head.
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Description Riser for Apple Studio Display with extra storage space under. Highlights: Height adjustment on the Studio Display is very expensive, save some money with this riser. I've included different heights to fit your needs. Print…
Wydruk około 12,61 €–15,41 € nettoWstępna wycena jednego wariantu
I printed these in PLA. They are a bit hard to get on but stabilize well..
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
Wydruk około 22,14 €–27,06 € nettoWstępna wycena jednego wariantu
Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bare stand for protection of an alphanumeric display 16 characters, 2 lines. This display is of I2C type, but the stand shall works as well for standard parallel ones.
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
So tired of untangling my ECG cables, or honestly watching my EMT untangle the cables according to my partners. One for each, 4-lead and 12-lead. Printed at 12% infill using PLA, will see how it holds up. It is a friction fit for the…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Wall Hanger holds 10 cars. Spacer piece goes between 2 of them for larger cars or bikes. You can scale the width for any gap you want. (My dude likes bikes so these are 5") I printed mine with 4 vertical perimeters at 90% infill for the…
Wydruk około 15,41 €–18,83 € nettoWstępna wycena jednego wariantu
Coin stand for presenting your collectible coins from DLRP or 34mm Monnaie de Paris Coins.
Wydruk około 3,77 €–4,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Notes Fits my display stand for the Sega Game Gear in height and vertical angle.
Wydruk około 3,00 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Wydruk około 5,29 €–6,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Re-modelled and extended to cover the battery hat I use.
Wydruk około 3,47 €–4,25 € nettoWstępna wycena jednego wariantu
This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Print the base solid and if you have issues with you cup leaking, add a height range modifier in your slicer that just covers the base (1.8 layer height) and enable ironing. cups usually don't leak through walls but more commonly through…
Wydruk około 10,81 €–13,22 € nettoWstępna wycena jednego wariantu
I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
Rotating/ Lazy Susan Lego Minifigure Display Need a space saving option to display all your Lego Minifigures? This rotating display is the answer, included dots for your minifigures to stand on, each level hold six minifigures (so two…
Wydruk około 12,23 €–14,94 € nettoWstępna wycena jednego wariantu
It rolls, it folds, it has a cute little bottle attached: the splatroller! A bit longer than most pens when in vertical mode, this is a nice desk/shelf display piece. Glue is recommended to assemble it, but the non-moving joints are all…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Stand for displaying your handheld emulation consoles
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Direct replacement for original part. Makes it a lot easier to rewire a single wire without disconnecting all wires from the controller board. The older version for MK2/MK2.5 makes access to the X Belt without removing the back plate.…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
Designed swatches for Spinning Filament Swatch Display - Lifts Swatches from Brad @ FTBT 3D with text for filament type. Following swatches are available. PLA PLA+ PETG ASA PVG FLEX Printing Settings: 0.2mm layer height turn on ironing…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display SGC graded TCG spots cards wall holder and display frame.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Hollow Display Turntable / Axial Ball Bearing Compatible with standard airsoft pellets aka BBs, 36 of them. Works even better with 6 mm steel balls. Smoothness : Super smooth, even more smooth with steel balls. Smooth even under heavy…
I made cookie Cutters that looks like a Paint Splatter from Splatoon. If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
This is a 3D elevation map of a race track called Nordschleife displayed on a base. I recommend printing the race track in a higher resolution so you can see the elevation without abrupt layer lines.
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses Gehäuse für ein 1,3" OLED Display Modul (128×64 Pixel) wurde speziell für eine stabile und saubere Integration in Elektronik- und DIY-Projekte entwickelt. Das Display wird von unten in das Gehäuse verschraubt, wodurch eine sichere…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.15 mm layer Prusament PETG print with supports
Wydruk około 9,15 €–11,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1/18 angled car display. suitable to get a bit more height and a nice angle to show off one of your models.
Wydruk około 8,67 €–10,59 € nettoWstępna wycena jednego wariantu
If you have an Original Prusa Enclosure and you want to use a Raspberry Pi 3/4 and an original 7" Touch-Display with your MK3s+. You need the following: 4x M3 x 18mm Allen screw 4x M3 x 8mm Allen screw 2x M3 x 15mm Allen screw 6x M3 nut…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend printing with a brim to prevent this model from popping off the bed during printing. If you appreciate the model Consider… buying me a coffee . If your from New Zealand and want to support me and or want a quality guaranteed…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu
I wanted to display my Smash Amiibos but I couldn't find one I liked so i modeled my own based off a reddit post I saw. https://imgur.com/gallery/P68cT/new I also created a variant to the display stand to hold all 4 versions of the Game…
Wydruk około 12,64 €–15,45 € nettoWstępna wycena jednego wariantu
You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
These models use the “Push connect” fitting type from Multiboard to wall-mount the Raspberry Pi 7" touchscreen (the one with the bolt-holes) and any VESA-compatible mini-PC. The mounts work with M3 socket cap screws - the display requires…
Wydruk około 2,28 €–2,78 € nettoWstępna wycena jednego wariantu
These Display bases were designed by me but were created based on MroznyHipis ( @stawiamklocki.pl ) display stands. Base size: 75322 AT-ST Hoth Base - 165x165x6mm 75153 AT-ST Walker Base - 165x165x6mm 75254 AT-ST Raider Base - 165x165x6mm…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Left and right LCD screen support to move the screen on top of the base frame, such that it does not stick out at the front. These brackets replace the original brackets that connect the screen to the bottom frame of the printer. The…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
No supports needed. Default settings.
Wydruk około 4,26 €–5,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
