Wyniki wyszukiwania: sr501

Sortowanie

31 modeli

P
PrintablesIc3Gr33dy

PIR HC-SR501 Case

This is a case for your PIR sensor. It fits perfectly into the case. Have fun :)

Pobrania
634
Polubienia
47
Ocena
4,88
P
PrintablesCorn Leaf

HC-SR501 (SR501 / SR-501) PIR Sensor Tiny Case w/ Snaps

Smallest possible case for the HC-SR501 PIR with snaps, mounting posts and indexing notch. Screws or tape mount to wall.

Pobrania
494
Polubienia
34
Ocena
5
P
PrintablesHouse3D

PIR HC-SR501 Housing Without Extension

Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…

Pobrania
426
Polubienia
17
Ocena
5
P
Printablesopentux

HC-SR501 PIR ceiling case

Dear makers, we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR501. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from…

Pobrania
345
Polubienia
23
Ocena
5
P
PrintablesManelTo

PIR HC-SR501 (step format)

An HC-SR501 PIR component in step format for use in your own designs.

Pobrania
310
Polubienia
13
Ocena
0
P
Printablesclement0635

Support and enclosure for HC-SR501 motion sensor module

This enclosure is designed to fit perfectly an HC-SR501 motion sensor module such as this one .

Pobrania
266
Polubienia
26
Ocena
5
P
Printables3D Try Outs

HC-SR501 PIR Sensor box

HC-SR501 PIR Sensor box. HC-SR501 IR Pyroelectric Infrared PIR Motion Human Sensor Detector for Arduino eBay Seller : dkjna_ltd Box bolts M3x5mm PCB mounting holes 2mm bolts Video on YouTube:

Pobrania
216
Polubienia
9
Ocena
0
P
PrintablesA-maze-1ng

PIR sensor housing with movable mount (HC-SR501)

For my project I needed a articulated mount for the HC-SR501 PIR senor. The base plate can be attached with M3 wood screws. The coupler needs to print with support. What you need: 4x M3 heat insert (I used M3x5.7mm) 4x M3x8 screw 3x M3x12…

Pobrania
188
Polubienia
18
Ocena
5
P
Printablesbeerman

PIR Motion Sensor - WEMOS D1 Mini + HC-SR501 - Philips Hue

After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…

Pobrania
164
Polubienia
17
Ocena
5
P
PrintablesScott Gibb

HC-SR501 PIR Sensor Case

HC-SR501 PIR Sensor Case This thing is a simple bolt-on case for the HC-SR501 PIR Sensor, the case is designed so that it can slide onto my Panasonic TV and face the rest of my room. The case was designed using an open source step file…

Pobrania
150
Polubienia
10
Ocena
0
P
Printablesopentux

DHT22 + HC-SR501 PIR ceiling case

Dear makers, we would like to share our ceiling case for DHT22 sensor, together with PIR Arduino compatible sensor HC-SR501. Use two 2x4mm screws for fixing PIR. Drill hole 67 mm. We tested with PETG due to higher temperature resistance…

Pobrania
122
Polubienia
17
Ocena
0
P
PrintablesChris Twomey

HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle

Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…

Pobrania
107
Polubienia
14
Ocena
0
P
Printablesplanetar

Case for ESP32, PIR HC-SR501, 0,96 I2C Display and 2 more sensors

This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…

Pobrania
100
Polubienia
8
Ocena
0
P
Printablesarslan

HC-SR501 PIR Human Motion Sensor

This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…

Pobrania
95
Polubienia
14
Ocena
5
P
PrintablesIra S

PIR HC-SR501 IR Sensor Enclosure for Arduino and Raspberry Pi

Small enclosure for a HC-SR501 PIR Infrared Sensor. Enclosure includes notch for use with a small cable tie to secure the cable so it won't pull out. Additional hole below the sensor hole is for an optional LED if you want to add one to…

Pobrania
94
Polubienia
11
Ocena
0
P
PrintablesSnowHead

Minimal Case for the IR-Sensor HC SR501

A minimalistic case for the Infrared-Sensor Module HC SR501 . Has holes to reach the trimmer for sensitivity and output pulselength. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution: 0.20 mm Infill: 100%…

Pobrania
88
Polubienia
9
Ocena
5
P
PrintablesMark B

Wemos D1 mini with shield, PIR (HC-SR501), DHT22 and 3 leds

Holder for D1 Mini with shield and LEDs. Optional separator that can be wrapped in Aluminium foil to provide additional shielding

Pobrania
72
Polubienia
4
Ocena
0
P

Master volume knob Onkyo TX-SR501E

50mm OD 27mm Tall Volume knob for 6mm potentiometer shaft.

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesDr.Quiz

Enclosure for HC-SR501 PIR sensor board

This simple enclosure is created for HC-SR501 PIR sensor board. It is specifically designed to blend seamlessly with the interior decor and to provide elegant solution for your security system sensors. The main goal was to combine ease of…

Pobrania
56
Polubienia
9
Ocena
0
P
Printablesebarnes

SR501 Motion Sensor Case

This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesBantje_k

3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)

This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…

Pobrania
47
Polubienia
7
Ocena
0

8020 mount HC-SR501 Infrared Distance Sensor w-cable tie start v2

A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesTadeas.Grohmi

HC-SR501 PIR sensor case

There is hole for some cables and also there is space for neodymium magnet. Im using esp8266 and ESPhome. Made for wall mounting

Pobrania
24
Polubienia
0
Ocena
0
P
PrintablesScorch1262

Bewegungsmelder HC-SR501 Gehäuse MK1

http://www.amazon.de/Foxnovo-3V-5V-10DOF-9-Achsen-Attitude-Indicator-L3G4200D/dp/B00PRFPYI6?ie=UTF8&psc=1&redirect=true&ref\_=oh\_aui\_search\_detailpage Category: Other

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesgillis

Box for PIR motion sensor HC-SR501

A box for the PIR motion sensor HC-SR501 Opening for the 3-pins and for the two adjustment-screws see e.g. https://www.electrokit.com/en/pir-rorelsedetektor-hc-sr501 Check this out too ...

Pobrania
21
Polubienia
1
Ocena
0

Magnet Holder For SR501 Pir Sensor

I made a bed light where a sensor is used to detect movement, which should be located at the bottom of the bed, near the place where the legs go down. Over time, it became clear that this sensor was being knocked off its place by both the…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesRene Berthold

Case for HC-SR501

Case for the HC-SR501 Motion Sensor with 3mm Screwholes. Category: 3D Printing

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesMalaMaker

HC-SR501 PIR Motion Sensor Housing (w/ moisture seals)

This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…

Pobrania
15
Polubienia
4
Ocena
0

HC-SR501 PIR sensor case with rim clip (snap-on lid, no supports)

A small snap-together case for the common HC-SR501 PIR motion sensor, with a sawtooth U-clip underneath so it clips straight onto the rim of a tank or tote. We designed it for our turtle tote: the case sits on the rim with the lens dome…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

3D Printed Motion Sensor Case (ESP8266, USB-C, ESPHome, HC-SR501)

This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…

P
Printables

HC-SR501 PIR Human Motion Sensor

This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…