217 modeli
A holder or stand for eyeglasses with a big nose and mustache. One-piece version requires supports under the mustache and nose (for my set up at least). Two-piece allows the stand to lay on its back (excluding the base part) so that…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
This is a mustache to attach to a brass mouth piece you might want to print the clip if you want to make sure it fits. Category: 3D Printer Accessories
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
After creating my first glasses stand , I tried now a low poly version with improved, more realistic, form factor. Inspired by a stand which I saw weeks ago created in wood. Printing I printed it using supports by setting…
Wydruk około 5,99 €–7,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Yeep Beard and mustache
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Just a simple Mustache Coat Hanger
Wydruk około 3,49 €–4,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
This is a modified version of https://www.thingiverse.com/thing:4801663 by Denes. I made the mustache and eyes. You can download the other ragdoll bot in the pictures here 👉…
Imprimez les Moustaches des different personnages de l'univers Mario pour vos parties de Mario Kart endiablé Modification des moustaches vous pouvez maintenant y fixer un elastique pour les moustaches de waluigi et de Wario vous pouvez…
The only adapter currently available is for a trumpet mouthpiece with a 12mm diameter (Schilke in this case). I plan to add more clips for different diameters. Until then, the easiest way is to scale all parts so that they fit onto the…
30 * 20 * 1.5mm, fine toothed comb. Could never find a good tight toothed comb so I designed one. I have a ridiculous number of these around, in the little jeans pocket, in wallet, in rucksack, on desk, bedside table & etc. Designed to…
Mark your golf balls with this moustache template
This tiny comb is perfect for a mustache, but could be used on other small areas of hair. Needs to be printed with a .4 nozzle or smaller.
Prance around with the best looking 'stache ever! No need for facial hair.
Simple Trombone moustache for any small bore trombone mouthpiece Printed with tree supports and raft, taking around 30 minutes and 1.5 meters of filament. Printed mine at 1.5mm layer heights, but any will work.
Named "Moustache", this protective cap is designed to fit your Gillette King safety razor. As this razor is pretty similar to models from other brands (like the Merkur DE head, for instance), it might also fit them. If your razor's head…
Mustache/beard comb with keychain hole. I recommend resin printing with a "tough" resin. 3 inches long. .75" wide.
Meet Guille, the quintessential Mexican mustache maestro! Watch out, his rugged exterior may fool you, but underneath beats the heart of a teddy bear! The Gang of Worms is a series of toys for boys and girls, quick and easy to print,…
When you need a comb as outstanding (or outlandish) as your soup strainer. (Version 3 consists of Teeth, Bottom, and Top. I pinned it together and added a dab of superglue.) (Version 2 has a flat back and prints as one piece. You can add…
French Cat Peeking Bookmark (moustache and beret). Remix of the Cat Peeking Bookmark (V3-Thinner) 70% the size of the original Cat Peeking Bookmark
These are prop mustaches for a photo booth that I made for an event. They are easily scaled, look fantastic in black, and are a good size at 120% to put on someone's face. Have fun! Print Settings Printer: Creality CR-10 Rafts: No…
This model is compatible with the lego system.
Remix of the Cat Peeking Bookmark with a Moustache. Remix of the V3 (thinner version). This one is also only 70% of the original size.
My sister wanted a mustache for her flute sence the one she bought broke so I made this. A Flustache.
Here was a fun project, a trombone mouthpiece with a mustache attached! In order to do this, I oriented the length of the mouthpiece level with the bed when printing and used a filament switch. It surprisingly didn't get in the way of…
This model is compatible with the lego system.
EN Do not activate supports Bowl with lower compartment for waste (empty shells, packaging, etc.) 2024-12-30 Addition of a version with a 2x0.3 mm operating clearance (the basic version is 2x0.2 mm). Two files “BA-HautJeu0.3x2.STEP” and…
This mustache knife rest is easy to print and a good gift for everyone who loves dining. Knife, fork or spoon can be placed in the middle in order to stay away from the table when plates are changed. Printed mine with 50% of the original…
Accessoire photobooth pour baguette de 6mm
Summary Continued … It has a base dimension of 8.8 cm X 8.8 cm and a height fully completed of 15.1 cm with a width of 14 cm from the mustache. It is easy to carry around and proudly show off in your home or desk. Lesson plan and…
The Model is quite large, but can be scaled down in the slicer quite easily as shown in the picture. Print Settings Printer Brand: Bambu Printer: X1 Carbon Rafts: No Supports: No Resolution: 200 Infill: 20%
It's a mustache for your saxophone mouthpiece. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: GEEETECH PLA Matt Black Category: Other
My kid needed a mustache for Lorax dress up day at school, now he bears a striking resemblance to his grandfather. It is printed in Matter Hackers Pro Series TPU so it is soft and flexible. It is kind of small for an adult nose, but could…
Just a fun visualizer for the Creality Ender 3 S1 sprite extruder (may work on others, but not sure). There's two versions of the moustache as I decided I wanted one that looks a little cooler while spinning. No supports! Prints very…
A simple bookmark that shows a moustache on the outer face and which uses a fin to separate a book's pages. An easy, fast print. The bookmark works best on paperbacks but it can also accommodate hardcovers by simply pulling the bookmark…
A party favor that is quick to print and fun to use. Printed in PLA. 10% Infill. Now supports. 0.4mm nozzle with 0.2mm layer height.
Print, groom, grin – this little comb does it all! 🪮 This beard comb brings personality to your grooming routine – with a playful moustache shape that’s sure to raise a smile! Designed for easy FDM printing at home, it’s optimized for use…
I came up with the idea because I found this product that costs €15 and therefore I wanted to create it myself.
This model is compatible with the lego system.
This design is my way of making a comb for beard and mustache. Might update/edit later. Hope you enjoy. P.S: I know it is small and maybe hard to use but give it a chance. After all I will be waiting for your recommendations and…
Mr. Mustache Bic lighter case
Here's another page holder. Now you can read your favourite books like a true gentleman :) Print instructions Category: Gadgets Summary Here's another page holder. Now you can read your favourite books like a true gentleman :) Print…
This is a simple moustache you clip under your nose (septum). It is not the first on here, but I had a hard time finding one I found truly comfortable to insert and wear. This one is easy to put on and take off, is comfortable to wear…
Stick this in your nose and have a new look ;) Thin for giving to kids for Halloween - resize to fit if you need one.
Photo booth props you can use to make your photo's more classy. ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a…
Give your car a little flair with the Ford Hex Grill Mustache accessory. Works on any Ford vehicle with the Hex Pattern (Focus, Fiesta, Edge, Explorer, etc.) Was designed in Fusion 360 specifically for a Fiesta ST but has also been proven…
Replacement gears for the Moustache-brand Shiatsu massager sold on Canadian e-commerce sites 123ink/ShopperPlus. We've had two of these units and found that the same gear often gets shredded after prolonged use. Used this OpenSCAD script:…
This model is compatible with the lego system.
A set of fine toothed combs sized for grooming your mustache. I made these using OnShape.com and printed them on my K1 with a .4mm nozzle at a .1mm layer height in about five minutes.
Have you always wanted a fabulous handlebar moustache but never had one ? For only a few grams of filament you now can have one! Don't forget to post your makes and get your Prusameters!
For all the cool guys with your enloved beard: You are searching for a beard comb, but want something that's cool and badass? I have something for you! The skull beard comb with a trendy mustache! Recommend to print it with mind 50%…
This is a remix with holding sticks for the mustaches. I added a .3mf with color change for the sticks working on the Prusa XL We had some fun taking mustache pictures of everyone one at our last party, I hope you will have too.
I figured if the googly eyes were a requirement, I could at least compliment them with a moustache. This one is cut perfectly to support the CR touch probe, and simply relies on gravity and a clever inner-chamfer to stay attached to the…
My first 3D printing model that I'm publishing. I hope you like it :) I'd sudgest to use a brim and no supports. After printing you can snap off the little support circle under the keycap
Your focus need some polite swag to be a real gentleman (sorry for the really bad print color)
It is just some funny thing which I created in 5 minutes.
A funny moustache for yours cats. It's so simple and obviously don't need supports. You can adapt the model to yours cat's size. If you want, I could upload more types of moustache. Put it on the comments. Please comment or like or both…
Mustache comb in recognition of Movember. Grow a Mo to save a bro! Donation Link to the Movember cause: https://ca.movember.com/donate/details?memberId=94 "Your donation funds medical research, groundbreaking tests and trials,…
Mini 13 System Compatible Head with various mustache styles. Head also contains a slot for adding a magnet.
J'ai rajouté une moustache a ce Robert pour en faire cadeau au grand père de ma fille
A stylish and original Easter decoration for lovers of humor and design. The mustached egg is available in two sizes – medium 110 mm and small 77 mm . The size can be adjusted to fit your preferences. The model is also available in a…
I print these at 0.3mm because they don't really need to be detailed.
Template for moustache. Draw different moustaches in pictures. There are 14 variations available.
still a work in progress, but couldn't find my mustache protector while drinking a few weekends ago so i made one. still trying to get the rim attachments to sit right on the glass
Can be printed without supports, and must be glued to the post of the base. Edit: I added files to make it a bobble just in time for the contest. I will update with a bobble picture soon.
porte lunette moustache nez de clown pour poser vos lunettes. le fichier est en deux parties. assembler les deux partie pour l'impression si vous avez un double extrudeur, sinon les deux parties peuvent être imprimé séparément puis joint
It allows to mount Racktime snapit baskets on a Moustache bike carrier (tested on Samedi 28.1, I don't know for other models). There are two parts, rear and front. It is only compatible with the narrow Racktime mounting plates in order to…
A Moustache Keychain to raise money for #Movember Feel free to use it however you want it, ¡and share the pics! :D You might want to change filament colors at 2.2mm height mark. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
English: Pimp your partyphotos with this simple accessories. The glasses make you look very intelligent, the mustache makes you look like a sir and the lips, they would have made Marylin jealous. Please excuse my bad drawing skills - I am…
Stachelwalze oder Entlüftungsroller für Farbroller mit 8mm Stahlbügel. Die Walze ist 200mm breit und wird mittels 2 Klemmringen auf dem Bügel befestigt. Der Bügel muss mindestens 220mm breit und 8mm dick sein. Stachellänge: 15mm,…
J'ai rajouté une moustache a ce Robert pour en faire cadeau au grand père de ma fille .
This little holder will allow you to safely hide a Chipolo tag behind the Moustache Lundi 20's tail light. To install, remove the nuts behind the tail light, pull out the ring that holds the cable on the screw, insert the holder, then…
Have you ever wanted your flexi-rex to have a monocle, top-hat, and moustache? Well, now it can! The monocle is situated on the right side of Rex, with a moustache on the front, and a top hat on their head. I made this model partially for…
A selection of Moustaches I modelled for movember. Can be printed thin in black and stuck to your face with double sided tape or on a prop stick and used like opera glasses. Models are a little rough as its my first time making something…
Ersatzteil für Klappstachelreihen Klammer vom Geschierspülmaschine von Siemens. UPDATE 17.09.2023: Klammer wurde überarbeitet.
Dieses Modell zeigt einen mechanisch inspirierten Dinosaurier mit beeindruckenden Details, die besonders gut mit Silk PLA zur Geltung kommen. Es wurde in Blender bearbeitet und für den 3D-Druck optimiert – die Teile lassen sich einfach…
I printed this on a wax printer and casted it out of sterling silver. it came out great!!
Movember coming up! Time to grow that itchy mustache again. This little comb eases the itch and makes your mustache 100% more better :) #mustaschkampen I gave these away but you had to make a donation to “mustaschkampen”. Any amount you…
Gooseberry harvesting aid for stitch-free harvesting of gooseberries.
BARBER SHOP KEYCHAIN
This is a LEGO mustache for your minifigure. It is a remix of SaulGoodman1960's “ LEGO Piece: 15439 ” on Thingiverse. This is the same design by SaulGoodman1960, except I increased the resolution to make the part smoother. Category: 3D…
Just a man with a moustache for board games!
A holder to put your glasses with a fun little moustache added on.
A clown nose with a nice pair of mustaches. A shape for the nose and two holes to attach an elastic band to the head
I used 8mm x 3mm neodymium magnets, in tandem with black PLA+. Standard print settings.
🎄Ich habe diesen schönen geometrischen Weihnachtsbaum erstellt und Teile diesen gerne euch! ☺ 🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀 Ich würde mich riesig über Bewertungen und Likes als Anerkennung meiner Arbeit freuen! Ich habe noch viele Dateien im…
A small comb for your moustache, you can wear it on your keychain
Fancy hat version of previous little cube guy
Stretching Cat with mustache Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I absolutely loved the original comb by @Benders Brother. Made some tweaks to the original based on my usage such as added another slot so the bolt head and nut sit flush with the body added a loop so that it can added to a keyring or…
The perfect knob for your classy machine: just a little touch of snobbery with this sKnob mustache.
