56 modeli
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
Introducing the Strider from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece with the base attached for stability. Note that the newest version…
Use PLA+ or better. Print Settings: Layer Height: .16mm Walls: 5 or more Infill 32% or more Use supports Non-Printed Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector…
:silt strider howling: I fondly remember these huge long-legged fleas and their high-pitched wails providing safe transport around Vvardenfel. I mourned their husks dotting the Ashlands, and wondered how their Dunmer handlers would…
This model is a set of printable legs for a XRP robot. The walking motion is fully mechanical and is driven by the XRP kit motors. The legs are able to walk over obstacles and the robot is also capable of turning. No extra motor or…
Aaaaanother one! Here's the diorama for The Farstriders. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height 2-3 Walls Infill at 10-12%, Gyroid *You can…
The Strider Collapsing Rod Stock From DI, A wonderful budget friendly printed alternative to metal & polymer collapsing rod stocks. Fully Open Source Files SBL1/Protean/Worker Collapsing Rod Stock Full Metal Rod Construction Quick Deploy…
Made this cup holder for my wife - she was having difficulties storing and keeping her elvie stride cups organized while transferring milk and cleaning them. I included a drainage hole on each side to allow for easy cleaning and drying.…
My wife broke the belt clip on her Elvie Stride breastpump. Instead of looking to purchase a whole new holder just for the clip I thought I'd take a shot at modeling one in Fusion 360
A Woe Strider. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Vhorlath Realms – Season I The Duskstride Noble Guard is an elegant Elf character from the hidden paths of the Veiled Grove. Calm, refined, and watchful, this miniature represents a graceful woodland noble, silent escort, grove sentinel,…
An articulated minecraft strider with a nozzle box. Has optional magnet holes for the lid but otherwise no superglue or extra hardware required! Just print one color at a time. (If you are not familiar with minecraft lore, the striders…
🌋 Kaela Emberstride – Rogue of the Vale Lore Entry: Born in the shadow of the Flame Golem’s first awakening, Kaela Emberstride grew up navigating the scorched ruins and ember-lit caverns of the Vale. While others fled the firestorms,…
Flame cap to fit 14mm acorn nut on rear or front Strider bike through axle. Printed in PLA with 25% cubic infill. Will update with another version I find durability is an issue. Created mainly to make my kid faster, and partly to protect…
Made this for someone who was cosplaying Dave Strider at a convention. Simple design that utilizes the multicolour function of the printers. Images show printed model and a couple renders. Attached files have a coloured .3MF included
Couldn't find Homestuck characters anywhere, so I thought I'd give it a go.
This adapter will fit your 100x12mm true axle fork to a Thule fastride. Make it sturdy. PETG, 4 perimeters, 30% infill worked for me.
I designed this rim and tire combo to replace the wheels on a strider bike for children with smaller legs. This wheel is approximately 8" in diameter (200mm actually) The rim I printed with PETG and requires supports. I used 4 perimeters…
My toddler wanted a bell on his Strider. Unfortunately, the bells at the bike shop are designed for standard handlebar diameter's, not a Strider's 0.5" diameter bar. Luckily, my 3D printer makes a great adapter! This adapter should work…
Put together a little "bike rack" to carry my kid's Strider bike on the back of our Tern GSD. It's designed to clamp onto the Tern GSD Clubhouse+ (for GSD V2) with the extender bar on (so the angle matches up correctly and you clear the…
This is a Strider from The Cycle: Frontier video game in the form of a statue for display! Enjoy!
I made this model in a few hours, I hand modeled it and used the original strider teture for the model.
Capture the essence of confident movement with this stunning 3D printable figurine that brings dynamic elegance to any space. This beautifully detailed STL model showcases a figure in flowing coat and hat, mid-stride with remarkable…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #21…
I designed this adapter to fit bikes with a 15x110 Boost Thru Axle to the Thule RastRide bike rack. I printed it out of PC with four wall perimeters and 25% Gyroid infill.
Flaming skull version of the stencil insert comes with extensions that fit into the grooves of the golf ball holder. Explore other stencil designs Usage Used with Golf Ball Spray Paint Holder Jig and either regular spray paint or airbrush…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113.15x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
This is a part of our [Spacelair Anchorites Bundle]( https://www.myminifactory.com/bundle/4257/Spacelair-Anchorites-Bundle )! 40% discount on STLs for all Patrons and Tribers! Try before you buy: download free models, bases and bits…
Printing Information: I recommend printing the model in PETG or other water-resistant filament. To improve the float ability of the model you can use only 2 walls and 0% infill. Use a brim to improve bed adhesion of the legs and antennae.
We freecycled a Strider Balance Bike from as friend, but one of the handles was mangles and not safe. Found this design but it didnt fit as the bore was 21mm and was not long enough. It also didnt print well on my machine due to the…
HexaStride B-01 es un concepto de robot hexápodo enfocado en estabilidad y precisión. Cuenta con cuatro patas articuladas, cada una con control independiente, pensadas para lograr movimientos coordinados y equilibrados. Diseñado para…
Standard 1/4" hex bit driver. Category: Hand Tools
This is the Strider Arm from the video game The Cycle: Frontier. Enjoy!
Thule OutRide 561 wall mount maby it fits too FastRide and OneRide
UPDATED WITH BETTER SWORD SUPPORT Category: Games
Securely holds the Strider Sword to the HSW. Uses the quad attachment style. Print with supports and 3-4 walls. 15% infill is fine. Will need to rotate the sword sheath into place as its a very tight fit. Category: Organization
Simple keychain with a strider face on it.
This 3D-printed thru axle adapter is designed for the Thule FastRide bike carrier and supports both 100x12 mm and 120x12 mm thru axles. It provides a secure and stable fit for transporting compatible bikes. Printing settings: Material:…
Replacement for fastrider bike bag mounting hook. The regularly breaks and spare parts are not easy available, With this you can make it yourself.
This is a wrench to remove the thumb stud on Strider Knives, specifically the older models: GB, AR, RC, etc. They are used instead of a pliers, as that would scratch or mar the metal of the thumb stud. Category: Hand Tools
This is the flame strider The joints are not been modeled with tolerance so the body will likely need to be sanded down and the pin could likely work if printed at a slightly smaller scale. The arms and thighs need to be mirrored for the…
This is a mount protects your receiver antennas. Print it in TPU! Category: R/C Vehicles
Add-on for a PSD wrench. This is used for Strider Knives, to remove/adjust the pivot. Without the knob, the wrench digs into your hand. v1-0-3, changed it from a tear drop shape to basically a sphere so that I could add another hole which…
this is customizable with the two plates(the rectangle and the square plates) are used to trace out paper and put on/ glue on the strider body
Picture one is the recreation and picture two is the original. I did put the top indent in originally but didn't liked how it printed so I removed it. It's not needed anyway. It fits inside the net to hold it in place and the screw holes…
I recommend printing this model vertically with 85% infill to maximize strength. Otherwise good luck and I hope you can get your elliptical working again. print settings for my ender 3 v3 85% infill no supports petg brim 3 walls note that…
for best print, print upside down with tentacles facing upward and have supports on the bottom of the skull
Imagine if bro was a keychain y'know.
I made this model in a few hours, I hand modeled it and used the original strider teture for the model.
for best print, print upside down with tentacles facing upward and have supports on the bottom of the skull
I recommend printing this model vertically with 85% infill to maximize strength. Otherwise good luck and I hope you can get your elliptical working again. print settings for my ender 3 v3 85% infill no supports petg brim 3 walls note that…
This is a part of our [Spacelair Anchorites Bundle]( https://www.myminifactory.com/bundle/4257/Spacelair-Anchorites-Bundle )! 40% discount on STLs for all Patrons and Tribers! Try before you buy: download free models, bases and bits…
Vhorlath Realms – Season I The Duskstride Noble Guard is an elegant Elf character from the hidden paths of the Veiled Grove. Calm, refined, and watchful, this miniature represents a graceful woodland noble, silent escort, grove sentinel,…
Vhorlath Realms – Season I The Duskstride Noble Guard is an elegant Elf character from the hidden paths of the Veiled Grove. Calm, refined, and watchful, this miniature represents a graceful woodland noble, silent escort, grove sentinel,…
This is a collapsing Sword inspired by Aragorn's First Sword from The Lord of The Rings ALL MANNIKS3D designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my…
