38 modeli
If you already installed the drain hose plug , and want a matching cover of the unused hole, this is your huckleberry. A bit tight to snap in place but at least you know it won't pop out. If having difficulty, you can try a 0.99 scale…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
Improved version of the drainhose plate in response to suggestions from @PTech . Hole is lowered and angled to avoid water collecting in the tube. You may also want the matching cover for the other side .
[Update] If you have a newer model with the extra (5 total) trays you will want this version [/Update] I found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also…
Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also holds them better - preventing them from falling or sliding down. Designed to fit the five trays of the…
it is meant to be printed in tpu and woven into a H frame type chestrig as a “cummerband” ( .STEP , .f3d ) included
If you have a newer model with six trays, I uploaded that version here: ttps://www.printables.com/model/1587701-harvestright-pro-large-tray-drying-rack Found it very annoying to have a bunch of water drip out of the trays after drying -…
A variation on the theme of the vampire apocalypse. I plan to make a few more vampire-themed masks. Unfortunately, I don't have a 3D printer right now, so I can't try out the printed mask on myself. Therefore, I ask you to treat the…
I wanted a 5 tray drying rack but couldn't find one. So, I made a super quick 5 tray remix within the Prusa Slicer. GCODE and .stl available.
Helps hold up to four silicone mats for drying after washing. No supports required but you definitely want the nozzle fan running to keep the tips from drooping. You might also be interested in my other models for the HarvestRight Freeze…
This is a 6 slot version for older machines. If you have 7 trays, you want this remix: https://www.printables.com/model/1587731-harvestright-pro-xl-tray-drying-rack Found it very annoying to have a bunch of water drip out of the trays…
Use case: Do you have an industrial HarvestRight freeze dryer? Are your hoses getting damaged or even cut by the sharp stainless steel cutout? This is your fix! This is a two-piece insert that clicks together. This open design allows for…
Helps hold up to five silicone mats for drying after washing. No supports required but you definitely want the nozzle fan running to keep the tips from drooping. You might also be interested in my other models for the HarvestRight Freeze…
The SawStop Overarm Dust Collection comes with a 4" dust Y-port to connect the blade guard's smaller vacuum hose into the saw's main dust collection port. The problem is the design creates very little suction from the blade guard. The…
Renote viewing of your HarvestRight Freeze Dryer can be done by camera per this video: This is a simple 3D printed mount for the REALink E1 Pro camera shown in the video. It allows the camera to be swiveled out away when not in use. It…
Designed this to help get the food from the tray to Mylar bags without spilling. use 6mm dowel to prop up at height
Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also holds them better - preventing them from falling or sliding down. Made for the small model - not sure if…
See https://www.printables.com/model/507270-harvestright-camera-mount for @dgardner_169337 excellent solution. I need a new bracket to fit the camera that I had. It needs 4 x M3 x 12mm bolts. Printed in PLA+ with 15% infill, can use other…
A 90 degree sweep for a Sawstop PCS dust port that accepts a Dustright vacuum fitting. It is designed to fit in the bounds of the ICS mobile base (pictured) so that you can fit most outfeed tables tightly up to the mobile base. It is a…
Out of the box, the HarvestRight freeze dryer's drain hose just dangles from a large oval hole in the side of the unit. This grommet is printed in two identical halves out of PLA and snaps into the oval hole around the hose to hold it in…
Helps hold the silicone mats up for drying after washing. Works for full-sized cookie sheet mats as well. No supports required but you definitely want the nozzle fan running to keep the tips from drooping. I have other versions that hold…
An adapter that plugs into the DeWalt StealthSonic shop vacs and adapts to the Rockler Dust Right Click-Connect Hose Adapter for FlexiPort 3' to 12' Expandable Hose:…
This is Striga's sword as seen in the castlevania anime on netflix. I was watching the episode where she puts on her daylight armor and tears through all of the villagers and just knew I had to print one for myself. The only problem is no…
Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also holds them better - preventing them from falling or sliding down. Made for the large model based on…
Lego DUPLO brick 2x2x2 optimized for shrinkage (for my printer tested several times) No support needed
If you have a 6 tray version, then you want the original here: https://www.printables.com/model/393149-harvestright-xl-tray-drying-rack-beta Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a…
This can be used to mount a Rockler Dust Right 4" to 2.5" Y connector to a wall. The model has will index with the indents on the connector to keep lock in place. Printed with five walls, and 25% gyroid infill in PLA for strength.
Replacement Clip for HarvestRight Mylar Bag Sealer used to hold the bar closed for storage.
To fasten the lid, use M3 socket head cap screws between 4 mm and 20 mm in length. Print lid upside down with supports enabled. For bonus points, print the lid in clear PETG with a glass profile [ 1 ][ 2 ][ 3 ]. It only takes 3 hours for…
Strigoi bust A strigoi — the vampire of Romanian folklore, the one the villagers dug up and staked — as a small bust for a shelf. Gaunt skull, deep-set eyes under a heavy brow, hooked nose, ears swept back to points, and a jaw hanging…
This can be used to mount a Rockler Dust Right 4" to 2.5" Y connector to a wall. The model has will index with the indents on the connector to keep lock in place. Printed with five walls, and 25% gyroid infill in PLA for strength.
Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a second dry before storing. This also holds them better - preventing them from falling or sliding down. Made for the large model based on…
If you have a 6 tray version, then you want the original here: https://www.printables.com/model/393149-harvestright-xl-tray-drying-rack-beta Found it very annoying to have a bunch of water drip out of the trays after drying - forcing a…
Out of the box, the HarvestRight freeze dryer's drain hose just dangles from a large oval hole in the side of the unit. This grommet is printed in two identical halves out of PLA and snaps into the oval hole around the hose to hold it in…
Replacement Clip for HarvestRight Mylar Bag Sealer used to hold the bar closed for storage.
If you have a newer model with six trays, I uploaded that version here: ttps://www.printables.com/model/1587701-harvestright-pro-large-tray-drying-rack Found it very annoying to have a bunch of water drip out of the trays after drying -…
This is a 6 slot version for older machines. If you have 7 trays, you want this remix: https://www.printables.com/model/1587731-harvestright-pro-xl-tray-drying-rack Found it very annoying to have a bunch of water drip out of the trays…
