Wyniki wyszukiwania: surefire

Sortowanie

36 modeli

P
Printablesmichalgerhat

Airsoft MP5 Flashlight Handguard for SureFire weaponlights

Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…

Pobrania
1240
Polubienia
128
Ocena
5
P
PrintablesUnknown1622

Surefire Pressure Switch Mount

A snap on Picatinny rail mount for Surefire Pressure Switch. Once put on it's very hard to take off, decide carefully before applying. Tape can be used to stop the pressure switch from sliding out. Print right side up, with support and…

Pobrania
578
Polubienia
36
Ocena
5
P
PrintablesSamK3D

Surefire HL1 helmet light mount

Adapter mount for Surefire HL1 helmet lights. Current screw holes are configured for Ops-Core ARC Wing-Loc rail adapter (20-98-103) but use the .step file to adjust hole size and position to suit your mounting requirements. Tolerances in…

Pobrania
376
Polubienia
26
Ocena
0
P
PrintablesJosh Harris

SureFire Scout Mini Light Cap

This is a cap for a surefire M340DFT Mini Scout Light. The inner diameter of the cap is approximately 30mm. Enjoy!

Pobrania
233
Polubienia
12
Ocena
0
P
Printableslolikong poi

Surefire pressure switch mount for M-Lok V4

Remix from mcmik3. Add additional structure to lock in M-Lok mount. May not suit for Key-mod. Haven't been tested. V2.1 shall not work, so I made a V3. Just use V3. This time it shall work. I'm not good at modeling, but it shall works.…

Pobrania
224
Polubienia
35
Ocena
5
P
PrintablesMiki

Surefire helmet mount

Print settings: support touching buildplate 0.2 mm layer height integrated brige to help support quick relese lever, need to be cut out e.g. by exacto knife You need: 2x M3x8 screw with flat countersunk head 1x M3x10 screw with flat…

Pobrania
203
Polubienia
11
Ocena
4,5
P
PrintablesHey Jonsie

SureFire Light Button Extender

Designed and providing a replacement button for both the left and right side of the Surefire X300U-A light, may be compatible with other models. This will allow ease of access for those who may have physical limitations that prevent from…

Pobrania
135
Polubienia
21
Ocena
0
P

Surefire Scoutlight Mount Mlok M-lok

I used M4x10mm countersunk screws for mounting it

Pobrania
114
Polubienia
19
Ocena
0
P
PrintablesBlargedy

O-Light PL-PRO Valkyrie Fixture To Fit Surefire X300 version of the blackhawk Omnivore

This piece allows an O-Light PL-PRO Valkyrie flashlight to fit into a surefire x300 specific omnivore holster. The omnivore will need some modification to the rails to fit in, but will then engage the snap as the x300 would. Print in…

Pobrania
106
Polubienia
5
Ocena
0
P
PrintablesSpongy21

P90/PS90 Light Mount (Surefire Pro Series)

This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware Please Note that as this is a…

Pobrania
102
Polubienia
16
Ocena
0
P
PrintablesWW Tech.

Surefire 952V Lens Cap

Use 10" of 1/8" bungee cord.

Pobrania
90
Polubienia
9
Ocena
0
P
Printablesplaid_brad

Wall-Mount Flasghlight Holder - Surefire G2X

If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad I wanted to have a holder or bracket for storing Surefire G2X flashlights and keeping them handy. The mount uses two…

Pobrania
64
Polubienia
7
Ocena
0
P
PrintablesAstrapi

Battery Case for Surefire 18650 rechargeable with O-ring seal.

Battery case for surefire 18650 with onboard recharging. Normal 18650 will fit with space on the end. O-ring AS658-019 1/16" x 3/4" (Same O-ring as P6 tail). Case was designed to minimize size/diameter. Wall is thin in threaded area.…

Pobrania
57
Polubienia
11
Ocena
0
P
PrintablesSpecops
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
49
Polubienia
13
Ocena
0
P
PrintablesPDub

Gridfinity 1x1 Surefire Stiletto / folding knife holder EDC

This is a remix of the block template from Filip Kolinsky. This is part of my EDC / Dresser Valet series that I'm creating. This one is for a Surefire Stiletto flashlight but can also fit smaller folding knives like my Kershaw Kuro. If…

Pobrania
44
Polubienia
7
Ocena
5
P
Printablesmichalgerhat

SureFire Remote Tape Switch Mount for Picatinny Rails

I designed this adaptor to mount the SureFire style flashlight remote pressure switch (original is designated SureFire ST07) to Picatinny (RIS) rails. No screws, it just snaps on. Printing with TPU will allow easy installation, PETG will…

Pobrania
43
Polubienia
6
Ocena
0
P
PrintablesMVasilakis

Surefire Battery and Charger Case

The Surefire Battery and Charger Case is a remix of zx82net’s Waterproof Box v2 zx82net’s design looked pretty awesome so when I set out to make a battery holder for Surefires LiFePO batteries it seemed like a great place to start.…

Pobrania
37
Polubienia
10
Ocena
0
P
PrintablesFangoh

Gridfinity Surefire E2D Defender Holder (28mm)

I made this to hold my flashlight but really anything 28mm round should fit fine.

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesmichalgerhat

SureFire X600 Flashlight Mount for Zenitco Sport Handguards

I have designed this mount to attach a replica SureFire X600 flashlight directly on my replica Zenitco Sport-4 handguard made by 5KU. Note that the shorter SureFire X300 style flashlight might not fit as the bulky flashlight tip would…

Pobrania
31
Polubienia
11
Ocena
0
P
PrintablesB3rT

Gridfinity Surefire Holder

1x 3,5 gridfinity holder for surefire flashlight

Pobrania
27
Polubienia
8
Ocena
0
P
PrintablesLandy

Surefire SOCOM556 RC2 Multiconnect holder for Multiboard

A multiboard Surefire RC2 holder that uses either two normal Multiconnect attachment points or one Anti-Rotate Multiconnect remix attachments that I designed. https://www.printables.com/model/790060-anti-rotate-multiconnect Made to fit…

Pobrania
26
Polubienia
6
Ocena
0

Surefire WF502B Filter Cap

During my airsoft night games I found that when we split up that it was sometimes hard to see who was who. Using a small and simple print and some gel color filters I was able to create some very nice colored lights to distinguish my…

Pobrania
25
Polubienia
5
Ocena
0
P
Printables43D PRINT

Surefire helmet mount one piece version

Surefire helmet mount one piece One piece lower tolerances which hold better Print settings 3 walls 40% infill 0,2mm layer organic tree supports (threshold angle 25°only on bed)

Pobrania
22
Polubienia
2
Ocena
0
P
Printableslucidhack

Gridfinity 2x4x3U module for dual Surefire 6P flashlights

This 2x4x3U Gridfinity module is designed to securely hold two Surefire 6P flashlights, providing an organized and efficient storage solution. The module features precise, snug-fitting compartments tailored to the dimensions of the…

Pobrania
15
Polubienia
9
Ocena
0
P

Surefire M622V SCOUT LIGHT

Replica of Surefire M622V SCOUT LIGHT® It’s a model created using AI, serving only as a supplement.

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesComrade 3D

SureFire M300 Protection Airsoft

Protection for the SureFire M 300 Scout flashlight with or without rings for securing with paracord. The "eared" model needs supports.

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesAHensley

Surefire Suppressors Flashlights 2A 3D Logo Wall Sign Plaque

This is a basic logo for Surefire. Prints fast and easily with standard print profiles. Adjust size, infill, etc to your liking.

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesTheNewClarence

Surefire Hellfighter mount

This is a mount for the Surefire Hellfighter crew served light. It will work on Gen 1-3 have not tested on Gen 4 or 5. Giving you the project file as well so that way You can modify the mount to suit your needs. Personally I have adapted…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesMikluck

SureFire G2X Grip Ring

I was looking for a grip ring for my SureFire G2X and decided to make my own. It locks into the lower curved groove past the battery cap. It can be difficult to stretch the rib of the grip ring into the groove. Be sure to remove the…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesComrade 3D

SureFire M300 cover for installing a protective, IR, or color filter. Fusion 360 model for customizing the size of your insert.

It is best to draw a support for the inner part (on which the insert will rest after printing)

Pobrania
2
Polubienia
0
Ocena
0
P
Printables

Surefire helmet mount one piece version

Surefire helmet mount one piece One piece lower tolerances which hold better Print settings 3 walls 40% infill 0,2mm layer organic tree supports (threshold angle 25°only on bed)

P
Printables

SureFire G2X Grip Ring

I was looking for a grip ring for my SureFire G2X and decided to make my own. It locks into the lower curved groove past the battery cap. It can be difficult to stretch the rib of the grip ring into the groove. Be sure to remove the…

P
Printables

SureFire M300 Protection Airsoft

Protection for the SureFire M 300 Scout flashlight with or without rings for securing with paracord. The "eared" model needs supports.

P
Printables

Wall-Mount Flasghlight Holder - Surefire G2X

If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad I wanted to have a holder or bracket for storing Surefire G2X flashlights and keeping them handy. The mount uses two…

SUREFIRE SOCOM556-MINI 2 SILENCER Airsoft

3D model description This Model is inspired by the SureFire SOCOM556-MINI 2 Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 122MM - Widest Diameter: 38mm 3D printing settings My advice so you…

Polubienia
2
Ocena
0

Surefire SOCOM556-MINI MONSTER Silencer (AIRSOFT)

3D model description This Model is inspired by the Surefire SOCOM556-MINI MONSTER Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 126mm - Widest Diameter: 43mm 3D printing settings My advice so…

Polubienia
1
Ocena
0