56 modeli
Mini Surron Fingerbike! Want to bring your Surron with you everywhere? Well, now you can. Assembly for this model is kind of tricky but you can do it! Tools Required: Hot Glue Gun Super glue Materials Required: 1 Spring from Pilot G2…
Tested for durability on 20+ bikes Share your makes! Works with stock bolts Tested and tried on 20+ bikes Will work on erides and LBX Chain or Belt drive I recommend you print out of PETG and a very high infill, 100 percent is best
surron that you can 3d print thanks "tofgaefaef"
I used TPU to print the keychain, but any other material is obviously fine, too.
You simply ziptie it to the front of your bike. In case yours broke or you have the european streetlegal-version (L1E) and want to upgrade your light.
Model This allows you to mount an Led headlamp onto a Surron or Enduro ebike using the 4 screws on the top of the front forks. Print Settings I would highly recommend printing these with at least 4+ perimeters and at least 3 bottom / top…
Mini Self-Balancing Electric Surron Fingerbike! Want to bring your Surron with you everywhere? Well, now you can. Assembly for this model is kind of tricky but you can do it! Now it's Self-Balancing and fully electric! The Build for this…
just a surron ultra bee add a spring in the back for suspension aswell
ultra bee motor cover
Used PLA+ for testing but for heat use PETG CF or something similar. 50% infill (more for more strength) Honeycomb infill No supports needed .15mm layer height brim enabled Print with face laying down (shown in platter photo) If you want…
Designed this socket to remove the special nut on the surron light bee swing arm. Recommend to print in something reinforced, like PETG-CF. Works great, you don't need a lot of torque to break it loose. Uses a 3/8 ratchet.
This is for sur-ron ultra bee chain guide once you change the rear sprocket to a bigger one you need to adjust or change the guide that why I create this. It is also integrated which you can change next time the skid of the chain only
i test printed at .24 in PETG-CF and will see how it holds up supports everywhere not sure if heat is going to be any issue, only time will tell
A number plate we made for the Sur-ron. My brother is the “Electric is better” guy on youtube and we are uploading the model here for anyone to use. Over the years we changed the design slightly and added thicker sections, different…
Several versions of the holder have been extensively tested. In ASA it holds extremely well even under hard enduro conditions. Currently a TPU version is used, which is virtually indestructible. Optimal pressure settings include lateral…
Created this seat support to be able to use the Luna seat I was using on my Sherman Max. Simply put velcro on your trolley handle and the seat support. The bond should be strong enough for normal seated riding. I secured the mount with…
This key cover replaces the underwhelming original donut-style key cap. Infill 30% recommended. Glue both parts together after placing the key inside.
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
this will extend the support of your exiting skid plate from motor
Used GritShift MX stem, might be clearance issues for others. Number plate mount attaches to fork with zip ties.
This fits a Dorman 85915 switch that can be found in the United States at most auto parts stores. I designed this to use an already existing frame screw to hold it perfectly in place on the left side of the SurRon's main circuit breaker.…
Plaque avant Torp de remplacement du compteur d'origine pour Surron light bee qui vient cacher les fixations des clignotants Torp front plate to replace the original meter for Surron light bee which hides the indicator fixings
This box attaches to the underside of the surron LBX. It helps take the weight off your back while transporting the charger on your surron. I have been using it for about a month with no issues. The only problem is it does barely scrape…
Surronster hyper quad, I got inspired to make it once I saw the video You will need 3 springs in total for the quad. The front ones have to be L30mm by W4.5-5mm, and the rear ones need to be L23mm and W 4.5-5mm Also, when connecting the…
I designed a basic fender delete for my surron light bee x to solve two problems. I wanted to be able to clip/ ziptie a bag to the front of my bike. I wanted the bike to look more like a bike and less of an emoto to avoid unwanted…
This is a full kit to replace the; less than stellar, stock seat on the Razor SX500. It includes front and rear seat mounts, as well as a gap filler piece that's sorta neat. I put quite a bit of time into refining this; but alas, nothing…
The washer plate spread the pressure on the riser plate. the riser is printed out of tpu with 3 or 4 walls and 15% grid infill you want it stiff. 3 or 4 top and bottom layers.
A simple bracket mount for a DROK LCD Display Digital Multimeter useful for eBikes. In this case the mounts are fitted for the stock stem of the SurRon electric bike. https://www.amazon.com/gp/product/B07B4CWKRJ Print Settings Notes: PLA…
Killa Bee - Surron conversion, tank/battery cover swap for Mototec 48v and funbikes mxr 1800. Fits with original hardware and can be printed on a 220mm build plate.. fits with light Bee seat. “I’m in the process of designing the seat…
It looks mirrored but once you print it it looks really cool
Surron keychain made on onshape. If you love this sub to Our YT. https://www.youtube.com/@Ad3dprinting3/shorts (surron)
Adapter so you can use Surron style fenders on your Yozma, Cemoto or Valtinsu bike. The plate is designed so you can use your original fender hardware then add in hex head bolts to the other side that will adapt to a surron style fender.…
I printed in PETG but you must print in ASA
Amazon.com : BlyilyB 12-80V Dual Color Motorcycle Scooter Amber Color For Turn Signals and Red Color For Tail Light Brake Stop Light Lamp (Pack of 1) : Automotive
Chain driven jackshaft for my model Surron. Needs bearings and fits with a Lego chain.
Kinda flimsy and it need bearings, I used a 3mm nail, that I cut to fit, for the shafts
Brelok Surron. Brelok może być zadrukowany w wielu kolorach. Jest dwustronny. Brelok jest cienki, więc nie przeszkadza w użytkowaniu. :) KOLORY TRZEBA DODAĆ MANUALNIE W PRUSA SLICER :ZÓŁTY-NAPIS, KOLOR TABLICZKI DOWOLNY W INNYCH SLICERACH…
Included are models for the Carrier Plate, Riser, and Adapter plates. STEP and F3D available for easy modification. Additional hardware required: Attaching adapters to carrier platform: (4) 1/4-20 * 2.5" Carriage bolts (4) 1/4-20 Nyloc…
1x M5 Bolt needed (any longer than 2cm) Talaria Mx3-5/Komodo and x3 compatible endcaps for stock bars
This is a keychain for Surrons and backpacks
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
i test printed at .24 in PETG-CF and will see how it holds up supports everywhere not sure if heat is going to be any issue, only time will tell
Spring Dimensions - Both the front and rear suspension uses springs which you can easily find in pens Front Spring → Diameter - 5mm or less. Length - 30 mm or less Rear Spring → OUTER diameter - 6mm or less. INNER diameter - 3.5mm or…
Table of Contents Also works quite well with Dummy 13 by Lucky 13 Toys at 150% scale (last 3 pictures!) Spring Dimensions - Both the front and rear suspension uses springs which you can easily find in pens FORK ASSY - COCKPIT ASSY - MAIN…
