1 / 3
Surron Style Fender Adapter for Yozma / Valtinsu / Cemoto — zdjęcie 1
1 / 3

Surron Style Fender Adapter for Yozma / Valtinsu / Cemoto

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use Surron style fenders on your bike!

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Adapter so you can use Surron style fenders on your Yozma, Cemoto or Valtinsu bike.  The plate is designed so you can use your original fender hardware then add in hex head bolts to the other side that will adapt to a surron style fender.  

As the Surron is a bigger bike, you will have to trim about 1" off the back of the fender, but its an easy cut with a Dremel or other cutting tool.

INSTALL TIP:Bolts I used for the Fender are M6x20 Hex bolt.  You need these as you can't access the top of the bolt to hold it when tightening them up as the plate is against the bike.  Two bolts are supported but one goes into a gap and can lift up when you're trying to add the nut, so I'd glue all 3 heads into the adapter before you screw it into the bike so it's easier to install the nuts. 

The fender I used is here available in carbon fiber look or regular black: https://link.amazon/B0eXcNnRs

Printed 6 walls, 100% infill. 

Tagi