1 / 3
Surron Style Fender Adapter for Yozma / Valtinsu / Cemoto — image 1
1 / 3

Surron Style Fender Adapter for Yozma / Valtinsu / Cemoto

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use Surron style fenders on your bike!

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
89
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Adapter so you can use Surron style fenders on your Yozma, Cemoto or Valtinsu bike.  The plate is designed so you can use your original fender hardware then add in hex head bolts to the other side that will adapt to a surron style fender.  

As the Surron is a bigger bike, you will have to trim about 1" off the back of the fender, but its an easy cut with a Dremel or other cutting tool.

INSTALL TIP:Bolts I used for the Fender are M6x20 Hex bolt.  You need these as you can't access the top of the bolt to hold it when tightening them up as the plate is against the bike.  Two bolts are supported but one goes into a gap and can lift up when you're trying to add the nut, so I'd glue all 3 heads into the adapter before you screw it into the bike so it's easier to install the nuts. 

The fender I used is here available in carbon fiber look or regular black: https://link.amazon/B0eXcNnRs

Printed 6 walls, 100% infill. 

Tags