P
PrintablesOmega-TI
Frame for single gang 3.5" X 5.25" oversized switchplates.
Dress up your home, or prevent fingerprint marks on your wall. Attach with two small pieces of double backed foam tape.
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
Wyniki wyszukiwania: switchplate
Liczymy pasujące modele…
P
PrintablesExtra Fox
Púca 10-key Switchplate Skirt
For whatever reason I decided my Púca needed a little tidying. I'm not the biggest fan of the look to open keyboards, but in this case I found I liked it. So all this does is tidy up the space between the switch-plate and acrylic shield.…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDylanCO
Dallas Cowboys Toggle Switchplate
Remixed from /thing:2085782 . I just added Cowboys designs. I've uploaded versions with & without hooks, as well as a simple blank one if you would like to make your own.
- Pobrania
- 169
- Polubienia
- 18
- Ocena
- 0
P
PrintablesChrismettal - Binary-6
Merten compatible 55mm switchplates / mounts
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing switchplates. The frontplates all clip into a springed backplate that is also printed (InsertSpring). The backplate itself is…
- Pobrania
- 115
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSignalBoost
Nerf Rayven Switchplate
I am modding my Nerf Rayven to take a LiPo battery and I didn't want to just fit something in with hot glue. The switch I am using an Omron 16A microswitch with a plunger activation. I based the switch in fusion 360 off of…
- Pobrania
- 85
- Polubienia
- 19
- Ocena
- 0
P
Printablesgrubby raccoon (Jyang)
Nerf rapidstrike bobo style rev trigger for kelly switchplate
While installing ahalekelly's RS switchplate ( https://www.thingiverse.com/thing:2838203 ), I found that I wanted the rev trigger to be a little easier to press. This alternative rev trigger increases the surface area and makes the rev…
- Pobrania
- 47
- Polubienia
- 12
- Ocena
- 0
P
PrintablesChrismettal - Binary-6
DHT22 / AM3202 Switchplate wallmount - 68mm hole
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts…
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCajunMeemaw
Switchplate Collection - Victorian Coffin
If your room needs a delightfully gothic makeover for Halloween, or any time for year, look no further than these baroque style coffin shaped switchplates for outlets and light switches. There is only one color change so these can be…
- Pobrania
- 36
- Polubienia
- 21
- Ocena
- 0
P
PrintablesJamie B.
Switchplate cover for Lutron Maestro
Switchplate cover for a Lutron Maestro motion-activated switch. Includes a cowl over half of the motion sensor to reduce the field-of-view. I designed this because walking past my laundry room, with the door left open, would turn on the…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
Printablesrnbarrett
Custom Split 6 Gang Rocker (Decora) Switchplate
Got two 3 gang switch boxes separated by a vertical stud? Use one switchplate! This plate is more than slightly oversized because of the poor drywall work done by the contractors. Tweak the parameters in the Fusion 360 to make this design…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
Printableslromandine
Decora Style Magnetic Light Switch Cover Switchplate (10x3mm Magents)
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHills8
Sofle Choc / Base- and Switchplate (PandaKB Kit - AliExpress)
A Baseplate to stand on and a Switchplate to hold the Switches in position. Baseplate also in a "float" version with a reduced outer edge by 4.5 mm.
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBacon
BuschJaeger lightswitchplate / BuschJaeger DimmerSchalter Abdeckung
The ring has an inner diameter of 6mm. The plate on the bottom has a diameter of 15mm. For me the diameter matches perfectly the Busch Dimmer 2250 U. ------------------------------------------------------------------------------------ Der…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
Printablesoutkst
corne 5 col switchplate sketch
This is a 2D sketch for switchplate that can be used for 5-col Corne. Mostly useful if you are trying to get the plate in aluminium or any other metal or acrylic. The sketch is also laser print friendly.
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMigyololol
Switchplate with place for electrical ignition lock
The cover is taken from this model: https://www.printables.com/de/model/27976-missile-switch-cover My lockbody is Uploaded to here: https://www.printables.com/de/model/784400-lock-encasing-electronic-ignition-lock In the right, your lock…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCorey Hinman
Fan Remote switchplate
This was an older project, but we had a room where the only light source was the fan light. There was only a remote, no switch on the wall. We always misplaced the remote. So I designed a switchplate remote control holder specific to this…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 5
P
PrintablesBgpiper
switchplate housing
Cover for Tuya 4 gang smart switch to prevent bumping into sharp corners.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCharlie_Swan
Philips Sonicare Switchplate Cover Shelf Thing
As counter space is prime bathroom realestate, I made these little badboys. It is designed with US plugs and a phillips
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesneotoy
Tranquility Switchplate
I was inspired to make this as I thought about how light radiates throughout a room in a way very similar to the rings in a disturbed pool of water. On the wall it creates a peaceful yet interesting accent. Really something as powerful as…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
Printablesnuclearcodecat
freeabl shorter switchplate
i had to replace my freeabl switch with a roller type microswitch and needed a shorter switchplate. posting the model here. fits well and the dimensions are the same as the original, except it's shorter by 4mm and i had to remove the tab…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHannesMo
switchplate for the 4x5 Macro-Numpad by Toby Chui
I made a switchplate for toby chuis amazing numpad design. helps with the positioning and alignment of cherry-like switches. https://github.com/tobychui/4xMacropad/tree/main/4x5Macro-Numpad It fits the screw holes of his numpad case, you…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesbs85
Hunter Fan Two Gang Switchplate
Holder for hunter fan remote for a 2 gang switch plate. Print facing up with organic supports below.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTeeJ
Switchplate / Wallplate expanders for Blindsmart/Zemismart ZMR4 scene controller
This lets you use your existing switches as a mount for the Blindsmart/Zemismart ZMR4 scene controller. You will need to print with supports for the underside, but they come off very cleanly for me. I was going to add space for a command…
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNeal Connor
Flood Light Switchplate Icon
A switchplate icon for exterior flood lights Category: Household
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesglittalogik
GEP Standard switchplate cover
I couldn't find any downloads for this brand/model so I applied my calipers and almost-nonexistent CAD skills to design my own. Dimensions are almost dead-on, but I replaced the curved edges with more print-friendly chamfers. Printed at…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printableszargnut
Decora Switchplate Insert for Rocker and Toggle Switches
This is a simple model for installing toggle or rocker switches in DECOR US Style wide switch plate covers for residential and commercial wiring. I am using them for rocker switches used for propane heaters, as well as a motorized movie…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablessambarron
Rounded Switchplate Cover
Model in photo was done with fuzzy skin and a textured PEI sheet
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCajunMeemaw
Bigfoot Light Switchplate
Have you ever wanted to give your boring light switches a sasquatch upgrade? Let this legend become part of your home's illumination. Switchplate is oversized to cover any wall opening. It is designed so that the only direct contact it…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKim Fransman
Switchplate tolerance-fit-tester
As different filaments/printers etc needs different sized hole to fit my switches for handwired builds, I wipped up this supersimple tolerance tester. from 14.00 to 13.8 mm in .05 mm steps. Added step file with text as component. I used…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
Printables
switchplate for the 4x5 Macro-Numpad by Toby Chui
I made a switchplate for toby chuis amazing numpad design. helps with the positioning and alignment of cherry-like switches. https://github.com/tobychui/4xMacropad/tree/main/4x5Macro-Numpad It fits the screw holes of his numpad case, you…
P
Printables
Decora Style Magnetic Light Switch Cover Switchplate (10x3mm Magents)
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
P
Printables
Switchplate tolerance-fit-tester
As different filaments/printers etc needs different sized hole to fit my switches for handwired builds, I wipped up this supersimple tolerance tester. from 14.00 to 13.8 mm in .05 mm steps. Added step file with text as component. I used…