Liczymy pasujące modele…
A working replica of the Aztec Death Whistle from Ghostbusters: Afterlife Fixed errors from the original design . Printing Print with the eyes facing up, default orientation. Use support on the build plate only to avoid supports inside…
Pitbull-Labrador mix dogs are playful, loyal, intelligent and cute. If you have one, squirrels rabbits and chipmunks won't bother you.
Ghostbusters light up sign tree topper for your Christmas tree. Just add an LED light strip and feed the power cable through the stem. For the sign, I attached it with clear tape. Also, it is best to print the sign with white filament,…
For "GhostBuster Proton Pack BLUE Cell light Kit" by HobbyKit Ltd on Etsy HobbyKit Shop https://www.etsy.com/it/listing/484137546/ghostbusters-movie-prop-proton-pack We bought this kit to fit into kiou's Proton Pack Q-pack -…
Thanks to kiou for the wonderful work and for his great passion for Ghostbuster ! On model https://www.printables.com/it/model/25556-ghostbusters-pronton-pack-mk21-q-pack the " bracket_01.stl " piece is attached to the motherboard and to…
not much to say, printed in two colors. The gcode is for MK3S+ (color change stop included)
Lightbulb Sun - 2000 And after all the time I spent with you, summer went away and we just weren't the same I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to represent his discography.…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
Catbus(My Neighbor Totoro)
The logo of the movie Ghostbusters, Start with white, change the filament for red at 1mm height and for black at 1.2mm. If your printer has Marlin, you can change the filament by modifying your g-code and adding the line M600 before the…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
It's HUGE! It stands about 6 inches tall. It's semi coiled and if it could be stretched out it would be over a foot long. This makes it life-size! You'll need supports and you'll need them dialed in well!
Ghostbusters logo keychain printed it with geeetech matte black, esun red pla+ and esun matte white on top. my layers for color change were 6, and 12.
This model is a remix of my Kittenbus model, made into a useful print that looks fantastic on your desktop =) definitely makes for a cute Valentines day gift! Printing Advice This model is large but doesnt require much infill - printed it…
This version is outdated. MK4.1 is available here : https://github.com/mr-kiou/q-pack Open-source version of the proton pack from Ghostbusters. Our goal is to make the best, easy to use 3D printable version of the proton pack from…
Oh wow, it's the Catbus! Cutest pen holder ever. Perfect for a Ghibli fan.
The last of my Ghostbuster posts! When creating a bunch of Proton Pack parts for a halloween costume I ended up for a nearly fully modeled Proton Pack. I decided to take a cue from PrettySmallThings and turn it into a miniature. At the…
FDM-optimized Slimer figurine inspired by Ghostbusters. Stands on its own—no base needed. Printed with supports, great for painting details like the face. Perfect for fans, collectors, or Halloween decor. Please follow me here on…
It is better to print it in two colors by installing and replacing the filament on the 15th layer (this is when the layer thickness settings are 0.2 m). Print white first, then switch to a darker one.
I created a material library file from Creality's suggested settings for the 22W Falcon2/ Falcon2 Pro. I have the Pro model but I am guessing the settings are the same among both machines. You can open this file directly in Lightburn.…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Dog – Pitbull is reimagined with crystalline…
New version of the phaser with better dimensions and now includes a holster. Model Notes The original had a sort of ‘groove’ running lengthwise down the middle that I tried to smooth out and shouldn't be very visible now. Emitter is split…
American Staffordshire Terrier Amstaff Pitbull Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Dogs here: https://www.printables.com/@StudioMechanik/collections/2986065
As this model is in 1:10 scale, it is rc controllable and not a quick print! This is my second 1:10 scale “Lanz-Bulldog” tractor. Many parts are quite similar to my 1:10 scale “Eilbulldog” but I have optimized most of them. The interior…
llavero de pitbull
A few notes on the profile: I separated objects by color: body parts, blue stuff, red cloths etc. the head and the hat strip are the only multicolored objects (AMS) so are on separate plates from other parts The hat strip has enabled the…
I combined the FatBurner cover with the left and right base part to a single model by extending the bases 2 mm to the cover so that they overlap. I needed that because the extruder motor on my KE did not feature the mounting holes to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Few Different Sizes to Pick From Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to White for the rest
First released in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not realize…
I printed a lootbug for my friend (from the game “Deep Rock Galactic”), but the model was ported from the game and it didn't came out very well, so i made a better printable version for the fellow dwarfs out there!
This was printed on a Bambux1carbon Texture PEI Recommended 3 Wall loops Detect thin wall On 10% infill Arachne turned on Infill/wall overlap 80% Slowdown for overhangs unchecked No supports
Ersatzbolzen für Rolly Toys Tretbulldogs. Durchmesser des Bolzens 13,6mm. Im Gegensatz zum Original(auf den Fotos in schwarz) ist der Bolzen auf einer Seite flach zum einfachen Druck.
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
The files I posted match the size of the original that I remixed. If you wish to replicate my keychain's size, scale the files to 80%. Scaling to 80% allowed me to fit 5x2 mm magnets in the print. However, you may want to use a taller…
Ghostbusters Light. Printed 0.2 @ 20%. Created with the tutorial of Shurdle3D aka Pete PeeShay Webb.
Studio Ghibli film My Neighbor Totoro is one of my favorites. With my Totoro Cookie Cutters already available here on Thingiverse, I felt it was time to add the "Catbus" to the collection. This is a very large cookie cutter, 150mm across.…
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Multimaterial remix of Ghostbusters Logo Coaster by Trevor Day. ( https://www.myminifactory.com/object/3d-print-ghostbusters-logo-coaster-44614 ) All I did was align the original pieces. No actual edits were made to the files other than…
Wall Art decoration with motif ofPittbull
I downloaded the original 8MP camera mount from the LightBurn site and redesigned to print a little better with less support and also designed an additional neck mount for my galvo laser engraver. The neck on my laser might be different…
With the new movie coming out, I realized I never uploaded my Ghostbusters keychain to Printables so here it is. It's an updated version of my Thingiverse model with thicker white & red layers to prevent any color bleed. Happy printing!
Made this to go on my office door. My wife thinks my printers sound like the basement is haunted, but "I ain't afraid of no ghost"
The Terror Dog from Ghostbusters, I remixed the original file in order to create one with smaller thicker horns.
This is designed specifically for the camera that Lightburn sells for use in Laser Engravers/Cutters. It mounts to the underside of the lid, pointing down at the bed. The swivel allows the camera to be adjusted for angle and then locked.…
A ghostbuster trap dice box, the model's handle is actually a bit taller than the one in the picture to make it easier to grab. The little screw will keep the doors shut, use if needed
attach the grills to the base and if needed drill holes to insert brass nuts or screw directly in the base. User materials Base black petg 30% infill Grill grey PLA 100% infill Brass insert nut M2x4x3.5 (4x) M2 screw M2x5
In August 2011 my friend and I went to Wizard World Chicago. While there we met a couple of guys with Proton Packs taking photos for charity. After wearing their packs for a photo it got us thinking. "We're pretty handy, I wonder if we…
Multi color version of the Ghostbusters logo. I wanted a version where I could print it multi color off my Prusa XL. I made the logo as a vector image first from reference images and then converted that into 3D using Blender. Finally I…
Slimer Lamp 3 part Print. Slimer: its been hollowed ( or 3mm shell ) Base: which house the Led strip light wrap around the pole. Logo: and ghostbuster logo all parts are resized for the mikes project. if you are resizing it please make…
Halloween costume, Alien Chest burster
This stand was designed to fit the beautiful PKE meter from MSHDesignSTUDIO , but can be adjusted up and down to accommodate other models. … UPDATES: 09.2022 - Added base variant for Spirit PKE 09.2022 - Uploaded V2.0 of IONA base…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is one of my best makes, It took me a while; prints fast. DEPENDING ON YOUR PRINTER YOU MAY NEED SUPPORTS.
Meant for Beyblade X from what Leftburst said
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A hole was added into the floor of the inside to allow the model to be printed in resin, without the hole the model has cupping issues. Category: Creatures
This is an easy to print, and fully functional Alien Chestburster Halloween custom. You just need to print the mechanism and the head, clip together, take a belt and knot a fishing line or in my case a Waxed Denteal Floss onto its place…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
GhostBusters Logo for a multicolor print
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
So! There are many of these on here but I think mine is pretty great. I used some images of screen used connectors and some dimensions pulled from another connector to make this abomination. The other connector used small magnets that…
Looking forward to the new Ghostbusters movie! Here's the engineer corp design of the no ghost logo in coaster & keychain form. Just use the attached 3mf files for where to change filament color. Happy printing and who ya gonna call?
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Vintage Christmas Light Bulb Gift Box is a fun twist container box that you can fill up. The. base of the bulb does need supports but that's it. This is the first time I 3d modeled threads so that is why there are 2 cap versions. I…
Inspired by Ghostbusters , this cheerful Slimer Duck combines spooky and funny in one collectible figure. Perfect for Halloween decorations, movie fans, or anyone who loves unique 3D printed ducks. The model prints easily, stands on its…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
This is a collection of parts I designed to create my proton pack replica. There are several pieces and I will continue adding more as I complete the designs. In the meantime, I suggest using the models created by Thingiverse users…
This is designed for the Lightburn camera, specifically for the fisheye-120 but any variant should fit. This is designed to fit on the inside onto the handle-bolts of the lid of the laser engraver/cutter. Specifically the KH-750 but…
To celebrate Real Ghostbusters day, which premiered on September 13, 1986, here's a Real Ghostbusters keychain and coaster based on the commercial bumper with the ghost shrugging. Happy printing & who ya gonna call?!?
Ghostbusters coaster. Remix of "Ghostbusters Coaster Round" by nerdyviews (I added a raised edge around the coaster, as well as a note in remembrance of Egon Spengler, with Harold's birthyear and year of passing) Print Settings Printer…
Lightbulb piggy bank. No supports, 2 easy pieces. 13 cm tall. Includes Fusion 360 file. Print instructions Unassociated tags: light bulb, piggy bank Category: Organization Summary Lightbulb piggy bank. No supports, 2 easy pieces. 13 cm…
In the words of Janine, WE GOT ONNNEEEEE!!!!!! Here is my design for a Ghostbusters Firehouse Birdhouse built to the Royal Society for the Protection of Birds (RSPB) specification…
If you want the lines to be thicker, use XY size compensation in slicer. Increase it to 0.1 or more as you like.
Slimer from Ghostbusters Through-the-Window ! No AMS Required Bring a little Ghostbusters fun to your window with this spooky Slimer ! Half of the model sits outside while the other half appears inside, creating the illusion that Slimer…
My wife's new B+D Dustbuster didn't come with a wall hanger so I created one. Designed specifically for Gen 11 Hand Vacuum https://www.blackanddecker.com/products/hhvk515j00 Mounting holes are sized for #6 screws. I printed it upside down…
Slimer Christmas Ghostbusters Printing without supports!! Print in Place, comes fully articulated from the printer bed, easy to paint, completely free to download!! enjoy the model makers! our store is in:…
Ghostbusters coaster and display stand! Designed to be printed at .20mm. Black filament up to 2mm White filament layers 2.2 to 2.4mm Red filament layer above 2.6mm
I love the New Hobbyist's scale model proton pack, and I wanted a Christmas ornament version of it, so I just added a hook at the top to be able to hang it on a tree. I also did model the knob for the crank generator as the original…
Originally published in 2016! OCT 2026 UPDATE My sincere apologies to anyone who has downloaded these files since I posted them here in Jan 2026. I originally included an ARCHIVE.zip of old parts for those who might need them. I did not…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For a friend's birthday i wanted to build some ecto-goggles, because he is a big fan of Ghostbusters. I found some welding goggles at our hardwarestore and remembered some pictures of some DIY-Ectogoggles based on this model. You can find…
Pitbull silhouette for wall art decoration. 0.2 Fill 100% Ensure your bed is properly clean.
An updated follow up to my other Ghostbusters coaster, this logo is larger and is basically the whole coaster. I have also included a version with the inverted colors from the upcoming Frozen Empire movie, which required adding an…
Print & acrylic paint
Perfect for fans of the classic movie, Halloween collectors, or anyone who loves themed 3D printed ducks. Cute, creepy, and nostalgic — a must-have tribute to one of the most famous movie monsters.
Custom-designed velocity stack / intake funnel for 2-stroke carburetor setups – originally developed for a Wartburg engine. Printed in flexible TPU 82A for vibration resistance and durability. The internal helical spiral guides airflow…
The statue of liberty wearing a Ghostbusters proton pack, holding the neutrino wand aloft as a beacon to all who seek refuge from the paranormal entities terrorizing their lives. In her left arm, she clutches Tobin's Spirit Guide, as a…
Roof for https://www.printables.com/model/202759-lanz-ackerluftbulldog-hr7 ! I haven't tested this design yet but I will test it the next week(s)! Consisting of 2 bars to support the roof (with matching mounts to glue to the cabin) and a…
Hueforge: Ghostbuster's Slimer Multiple Sizes Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Green At layer…
4 Farbdruck beim Layer change rot weiß schwarz Das blaue Band habe ich angemalt.
Yet another 1:20 scale model, this time a "Lanz Ackerluftbulldog". This tractor in the modelled variant was mainly used for pulling trailers in farming or shipping contexts. However, it was often also used for farm work in the field,…
i remixed the pitbull keychain to show a face and a stand to remember pet
![Moving Alien Chestburster Halloween Costume [No Support, Easy Assembly]](https://media.printables.com/media/prints/14080/images/127156_13aad499-5a78-468b-8207-855f639129f8/20171031_001252_14080.jpg)
