385 modeli
Overview I converted my son's Pro Boat Sprintjet 9" boat to run a 1806 brushless outrunner motor, standard RX41 receiver, & 20A BL ESC. I designed a few parts to optimize the performance with the new drive system. Here they are… 3-Blade…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swiffer Wetjet Wallmount Just a wallmount for the swiffer wetjet. Nothing fancy, but useful. Print Instructions PLA works just fine for this application 0.2mm layer height 4 perimeters 40% infill
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Voor mensen die veel tekenen is dit wel een hulpmiddel. Rondjes tekenen zonder passer. Voor mensen die aan meetkunde doen. In 2 kleurern afgedrukt. This is a tool for people who draw a lot. Draw circles without a compass. For people who…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Perfect om als kado te geven. Maar je kunt het ook gewoon geven.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 4,22 €–5,15 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
Wydruk około 6,41 €–7,83 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
This small attachment can be mounted on an IKEA TJUSIG shoe rack to store a set of keys or other small parts.
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
This postcard stop prevents your postcards from sliding between the wall and the rack or from falling down completely. It's compatible with Ikea Tjusig coat rack. Dimensions of one part: 170 mm x 32 mm, front edge: 3 mm above the rest of…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
Print, like and share! Here is my solution to a problem I had. I keep the Swiffer behind a door and occasionally other items will hit the button when I open the door. After a couple of iterations, I found a solution... It needs support…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Toevallig gezien in een winkel van een fruitschaal in een ronde vorm met blaadjes heeft mij geïnsereerd om deze potjes te maken. Ze zijn afgedrukt met PLA dat kan je makkelijk vervormen met heet water. Ik heb de print in een grote tas…
Wydruk około 1,27 €–1,56 € nettoWstępna wycena jednego wariantu
Ik heb een Prusa filamentrol op ware grote getekend, en dan verschaalt naar 50% op de PrusaSlicer. I drew a Prusa filament roll at full size, then scaled it down to 50% on the PrusaSlicer. Groetjes Ludo
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Designed to snugly fit a metal bar (or any bar with a 16 mm diameter), these hooks are stable and can easily hold the weight of heavy coats. I printed mine in PLA with these settings: 0.28 mm layer height, 100% infill, and 6 perimeters.…
Commercial use is NOT allowed for this model
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
I've got a 2000 Jeep TJ and wanted some place to hang my keys separate from the rest of the family. Was going to just hammer a few nails into an interesting piece of wood I found, but my son thought a jeep holder would be better. Didn't…
I was inspired by the Thumper CJ, but my Jeep is a yellow TJ so that's what I decided to build. Once I started researching 1/10 scale model RC truck parts I realized I could purchase a rolling chassis complete with axles, transfer case,…
While in the Endor Imperial bunker scene in Return of the Jedi Leia uses the “SoroSuub Corporation (SC) X-30 “Lancer” target blast pistol”
This is an adapter for the later model TJs and LJs (probably 2003-2006) that enables the use of a cabin filter for the HVAC system. These Jeeps never had cabin air filters, which means all the dust you eat on the road or trail ends up…
Description Everyone knows Luke's lightsaber from Return of the Jedi. Disney sells them (I have one). But for those with a keen eye for details will know that the lightsaber Luke uses in most of ROTJ does not match what we get in the…
Softjaws for my HBM 250x550 Norton Profi Lathe with 125mm Sanou 3-Jaw-Chuck K11-125.
I printed with slim tree supports.
To open shopping carts without having to use money. Also this model can be released from the cart when opened! Just insert the coin and release it from the cart, it's that simple.
This is a three part panel that uses #10-32 screws and captured nuts to hold on the faceplate. This allows for easy access to the switches and wiring. Print the brackets mirrored and one face panel. Or cut the face panel out of wood,…
This is a small storage box for a Jeep TJ (1997 - 2006) held in place with magnets. It fits on the right rear fender behind the roll bar and the bottom of the box is contoured to fit without a carpet kit installed. There are three 1.26"…
UK: “Google translate” Zodiac 3D Font with star sign convention for 3D Stl files. Fonts are edited in Adobe illustrator and exported to svg files which are imported into tinkercad and saved to stl files... DK: Stjernetegn 3D Skrifttype…
Convert your factory speaker pods into 6.5" speaker pods with 0 Modification to the pods and using the factory hardware screws plus 4 M3's. This is on my '04 Wrangler but should fit all other TJ models. Print instructions Category:…
Hello! I have an updated version of this model that you can find here The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any…
If you want to test your printer for bridging, why not print an actual bridge :-)
With this design I tried to make an accurate replica of the Luke Skywalker Lightsaber from the Return of the Jedi (Hero Version). Easy to assemble! No Glue necessary! :) Just screw all the parts together in the right order. If printed at…
I removed the factory subwoofer and installed an aftermarket one in the center console of my 2002 Jeep TJ (Wrangler). After doing that, the factory cubby in the center console was too deep, so I needed to replace it. The factory one also…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
I made a 3D scan from a statue of the “world” famous Bartje from the Drenthe region in The Netherlands. More info about this character to be found on: https://en.wikipedia.org/wiki/Bartje
The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any supports or glue, all the parts screw together and are compatible with…
Mine broke off into my hand one cold morning so I made a replacement. Should be a snug fit over the stem in the dash. I recommend printing in something more resilient to heat than PLA, I chose PETG for mine and it has been fine for a year…
After my son took the IKEA Tjusig off the wall (he must have pulled a little too hard on it ), we needed a replacement part. This is the result. I printed the part with 100% infill and it fit and was extremely tight. Maybe it will help…
As probably many of you have gone trough - our Swiffer WetJet handle broke and I decided to try crafting a new one instead dumping the thing and buying a new one. Less plastics to landfill + money saved = winner :) The handle is design…
Historically the Dutch Railways (Nederlandse Spoorwegen) placed a pretty simple buffer stop at the end of the line. This is a Guage 1 / 1:32 version that can be clipped on to LGB-rails. It won't fit Marklin rails because these rails are…
So this is my build of the really well done boba fett gun created by Burgs. I didn’t like the stock, so I made one a little fancier. I decided to add an internal spring for the trigger and designed a plastic piece that goes inside the…
This is a professionally made STEP file for printing the HVAC blend door lever, which is no longer possible to buy.
Switch panel for Jeep wrangler TJ, i made this as i needed more switches for my accessory's. The panel replaces either the airbag switch or the empty panel behind the shifter. See files i have included 3x switch and 1x cig plug files or a…
Ein Pfeifenständer mit minimalem Überhang zum platzsparenden Aufstellen der Tabakpfeife
Small bin and lid made to fit in the unused area of the under hood fusebox in a 2002 Jeep TJ. I used it to store spare fuses in a small Altoids tin. The main box body is printed in PETG-CF for heat resistance and the lid is TPU so it is a…
According to the assembly manual, there is a piece that you can use to secure an IKEA TJUSIG shoe rack on top of another one. But if your life is even slightly comparable to mine, by the time you have the Idea to do this, that piece…
I was inspired by Unimatrixred's ESB Vader Saber, and wanted the complete set, so here it is Darth Vaders ROTJ stunt saber I printed everything at 1.5 layer height at 60% infill (I wanted it heavy) Using eSun PLA+ Grey You can print and…
lego popetje schaal 5:1 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.12 Infill: 15% Filament: 123 3D Jupiter PLA colar Category: Toys & Games
Little plastic clip that keeps the internal door lock/latch bar attached to the internal door handle on a Jeep TJ (probably a lot of other cards as well). All of the ones I found at the auto-parts store would not stay connected so the…
Description Ok, “easy” might be an understatement but with minimal skill it should be perfectly doable! And otherwise it is a nifty miniature sailboat. This is a tiny tiny scale model of a traditional Dutch SeaTjalk that was very common…
Most of the parts used for the ROTJ EE-3 blaster are found parts, while some might have been scratch built. On the stock we have 2 Revell Visible V8 Model Gear Case and 2 rectangular unidentified parts (so far). 1 Revell F-4E Phantom II…
This pot fits into the window box Stjärnanis from IKEA. I printed the example in PLA, but I think it should be printed in PETG, especially for the outside. I separated the feet of the pot to avoid support. In my case they stick without…
Description This is my take on Luke's ROTJ Hero saber. It is based off schematics found online that were created from a molding of the original prop. This includes small details like the 2mm and 3mm rings on the ‘grenade grip’. And now an…
1:1 Scale Design of Luke's Lightsaber from Return of the Jedi If you want to paint it, I suggest using files 1-4, file 5 is for all in one go Use no supports for File 3 (Top Hilt-Grip), Normal Supports for Files 1 and 2 (Top/Bottom…
A filler cap for the factory bumper when removing the OEM bubble caps. Print one normal and a mirrored version for the other side. Place on bumper and drill in place for best fit.
Replacement Kenner ROTJ Speeder Bike Handles As featured on Toy Polloi YouTube Channel! http://youtube.com/user/toypolloi/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ELDn0hmhOT Print Settings…
Made Softjaws for Sanou K72-125 4-Jaw-Chuck for my HBM 250x550 Norton Profi Lathe
This is a remix of a Stork card I found on Thingiverse. I've created a stand for it, so you can display it as a birth card. Made this as a gift for my family for our first born son. I've printed it on my Bambulab P1S with AMS for easy…
Based on Asgerkhan's “ Ikea Tjugo wall mount ” i simply removed the middle part and just printed the two sides which can be mounted to Skadis and give Tjugo a place to rest.
This is a spare tire bumper extender for a Jeep Wrangler TJ tailgate. (Mine is a 2002, but I believe this will work for most TJ models). It is a spacer for the spare tire bumpers if you have changed the rim offset or tire size so that the…
Softjaws (lenght 100mm) for a vise. So that your parts are not damaged when clamped in the vice. With three holes on the back to press in or glue in magnets Ø3x2.
Prints quick, does the job quicker! --- I put in a lot of design, testing and engineering hours into all my projects, while keeping my designs free and available for all. Please consider buying me a coffee to show your support and don't…
This is ‘’Nijntje'' a child-book character invented by Dick Bruna. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions please…
nijntje met ring voor kerstboom we hebben 3 opties
I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could. I couldn't find anything like this (maybe that is for a…
For hansgrohe Axor scale to about ~95%.
Some of IKEAs inserts for KALLAX are not screwed in, so if you for example push a drawer from BLÄDDRA in too far, you can push the hole insert out the back. To stop this from happening I designed some simple parts to screw or glue on. You…
The lightsaber that was used by the legendary Jedi Knight Luke Skywalker after his father's lightsaber was lost in a duel with Darth Vader. The weapon was most iconically used in Luke's final battle with Vader to complete the young hero's…
use cura slicer 75deg option prnits without support at 0,15 layer height HAVE fun Studentwork FDM supportless mesh by meshy.ai PLEASE LIKE as you download !! THERE is more here in the Profile from DND wargame stuff TAKE a LOOK
So I just purchased and mounted a TJUSIG hanger from IKEA and I notice that despite the great design there is a minor aesthetic thing (personal opinion), the hex screws remain visible. I tough that would be great to have them covered so I…
Remixed from another switch panel , but this switch panel is meant for an Auxbeam BA80 (or similar) 8 gang controller. It uses the same mounting brackets as the original design. There is space available on the right side of the panel for…
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver A - dot pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap. The little one connects…
GTJ Modular MarbleRun – Starter Track This is another one of my entries for the “Marble Runs” contest on Printables . Over the past few weeks, I have designed a growing range of GraviTrax Junior-compatible elements. For this contest, I…
Swiffer Wetjet Wallmount V2 taller
Beeld van de zak van Sinterklaas ter decoratie voor deze typisch Nederlandse feestdagen. Let op: zorg er voor dat je het met ondersteuning print! Kijk ook bij mijn andere modellen van Hoofdpiet en een zak met cadeautjes.
different sizes of spacers used in construction, for example to align the ceiling.
This is a real bird I recently learned about. They have excellent eyebrows. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These tools can be used to fix the camshaft on MultiAir engines and the crankshaft on T-Jet and MultiAir. This makes it easier to replace the timing belt. There are two versions for the camshaft. The version without a pin allows you to…
I printed this on a Prusa MK3 at 0.24mm layer height (0.20 initial layer) in PLA. Generate support up to the base of the pot only by either using a support blocker above 5mm or setting the support overhang angle to 85 degrees. The…
Fusion 360 file and example STLs Category: Buildings & Structures
I bought this set of heat-insert tips recently, which came with a 3D-printed tray, but nothing beyond the plastic baggie in which they shipped to keep them from flying all over the place. The set covers M2, M2.5, M3, M4, and M5. A few…
Parameterizable OpenScad model of a Tjusig connector. Adjust any parameter you like!
An ‘’Amsterdam's Paaltje'', these poles can be found all around Amsterdam. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone has any questions…
Print the model with rim and support. Used Organic support.
I own an original and thought to share the design with you. I've added two variants of fitting (GU10 and E14) also I've mirrored the base so you can choose if you want to show the bed structure in your print/lamp or the top side. Mirrored…
The kennel adapters that come included with VetJets are some of the worst pieces of junk (and most expensive) I have encountered at my clinic. Here is an alternative that is far more compatible between kennels and durable (and cheaper)…
This air intake debris filter fits all stock air intake cones for Jeep Wrangler TJ model years 97-06. It likely will fit many other Jeep models and years, but I have only tested it on that specific one. This part is a simple safeguard…
I noticed my Jeep TJ had a spot to store a fuse puller in the underhood PDC, but I could not find any production pullers that fit. This fits the early model TJs, although I understand late model may have a different style of PDC lid, so…
Simple and strong hook for bicycle helmet. For IKEA TJUSIG hat rack.
Kenner ROTJ Speeder Bike Exhaust Flaps (Ver B - easier to print solid line pattern on the back) - Replacement Flaps for the Kenner Speeder Bikes. Print out and plastic weld the 2 hooks in the spaces provided on the bottom of each flap.…
This nijntje is super fun to stick on something. The model consists of three parts so you can give it different colors. You have to change color half way through the body so that you get a black outline.
This is a headlight ring nut/clip/clamp/mount or whatever for a Jeep TJ Wrangler the ones on my TJ were stripped out and they would no longer hold the beauty/vanity chrome ring that goes around the headlight any more. I sorta copied…
I wanted to add a fan to push the air out from my EnXLosure case. However, I didn't have room for the fan to be mounted behind the case. This design has a cleaner overall look which complements the EnXLosure. I rummaged through my extra…
