P
PrintablesHeizung95
Nintendo Switch Toaster
Small Toaster to store your Switch Games
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
- Pobrania
- 5170
- Polubienia
- 560
- Ocena
- 4,92
Wyniki wyszukiwania: toa
731 modeli
P
PrintablesJeb Lee Tark
Toaster knob for 6mm D-shaft
This is just a replacement knob I had to make for my home. The original one was broken...
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 518
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMilanT
Jewelry case for rings and pendants to dressing-table (Krabička na šperky (prstýnky a přívěsky) do toaletního stolku)
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
Wydruk około 8,34 €–10,19 € nettoWstępna wycena jednego wariantu
- Pobrania
- 103
- Polubienia
- 30
- Ocena
- 0
P
PrintablesPeter Farell
Two Toads on a Floating Sandle Netsuke.
Two Toads on a Floating Sandle Netsuke.
Wydruk około 5,56 €–6,80 € nettoWstępna wycena jednego wariantu
- Pobrania
- 84
- Polubienia
- 43
- Ocena
- 0
P
PrintablesMilanT
Jewelry case for bracelets to dressing-table (Krabička na šperky (náramky) do toaletního stolku)
Another model of my jewelry box - now for bracelets (especially circular bracelets) and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky).…
Wydruk około 5,26 €–6,42 € nettoWstępna wycena jednego wariantu
- Pobrania
- 52
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMilanT
Jewelry case for chains etc. to dressing-table (Krabička na šperky (řetízky) do toaletního stolku)
Model of my jewelry box for chains and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: První model z mé série krabiček do toaletního…
Wydruk około 9,26 €–11,32 € nettoWstępna wycena jednego wariantu
- Pobrania
- 38
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSven Ruhland
Dwarven Toastmaster
The Model is about 75mm high and in the print mirrored to the picture. For a minitur about +30mm it has to be scaled down
Wydruk około 4,65 €–5,69 € nettoWstępna wycena jednego wariantu
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSkaran
Toadörr Varningsskylt! En skylt för alla fans av Joddla Med Siv - Rörmockars Ola
Here is a simple sign made for the fans of a band från Skåne, Sweden. In one of their songs “Rörmockars ola” the lyrics is about how ola gets stuck on the toilett since his dad only put in really tiny pipes. Its all silly but also a…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printableses.gosal72
Doble towel holder - Toallero doble
Requires a screw.
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesh2odragon
Toad Zone sign
100x160mm sign, with art of a fat, happy toad. We put ours up by the garage door where the 2lb Toad of Doom hangs out. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesClockspring
The Torture Toaster
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
- Pobrania
- 98 200
- Polubienia
- 11 183
- Ocena
- 4,81
P
PrintablesDehapro
SD Card Toaster Print In Place
Print in place SD card holder. https://www.youtube.com/watch?v=yyMM0uD7uX8 Support : No Raft : No Layer Height : 0.2mm
- Pobrania
- 3561
- Polubienia
- 643
- Ocena
- 4,97
P
PrintablesPopandsicle
Mario Super Mushroom Bowl (From Toadstool Café in Super Nintendo World)
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
- Pobrania
- 2509
- Polubienia
- 929
- Ocena
- 4,88
P
PrintablesMorphNest3D
Tiny Toad Tapper
Tiny Toad Tapper!! Tiny Toad Tapper is a fun, keyboard switch-based fidget toy. Simply click the cute toad for a satisfying tactile experience. Requirements: MX switch (recommended: Kailh Navy Box switches for their strong, satisfying…
- Pobrania
- 2452
- Polubienia
- 959
- Ocena
- 4,89
P
PrintablesFisk400
Gentlemen toad meme
Gentlemen, it is with great pleasure to inform you that I spent the weekend making this meme in blender.
- Pobrania
- 2111
- Polubienia
- 437
- Ocena
- 4,8
P
Printablesscottg
Flexi Frog Fidget in a Toad
It's a frog in a toad or frog in a frog or something. I drew inspiration from the Flexi Rexi Dino Eggs. The toad is hinged, opens and shuts like a surprise egg, and hides a little articulated fidget frog inside. Would probably look pretty…
- Pobrania
- 1999
- Polubienia
- 304
- Ocena
- 4,4
P
PrintablesBeardRobot
Missile Toad by BeardRobot (V2)
The second picture with the red ribbon is Version 2 with the updated missile! It's much cleaner to print now - Enjoy! I printed this in Cura at .12mm for super high definition. 9.5mm (3/8") ribbon wraps perfectly around the model - but…
- Pobrania
- 1987
- Polubienia
- 198
- Ocena
- 4,94
P
Printables3DMason
Articulated FLEXI CANE TOAD
This is a nice design from: https://www.thingiverse.com/breseart/designs This is a somewhat realistic model of a cane toad made to be a flexi toy. It's a very common type of frog that appears where I live, we call them "cururu". NO…
- Pobrania
- 1320
- Polubienia
- 235
- Ocena
- 5
P
PrintablesDeadius
The Grinch Merry Christmas - Feliz Navidad- Hand toasting and with ball
Diseños de El Grinch con letras de Feliz Navidad - Merry Christmas, mano brindando y otra con una bola de Navidad, 4 colores con 1 AMS. Impreso “boca abajo”. La idea es formar un conjunto con los tres diseños. Obviamente, se pueden poner…
- Pobrania
- 1123
- Polubienia
- 46
- Ocena
- 5
P
PrintablesDecorartor
Toadstool Vase
The Toadstool Vase is a charming, nature-inspired 3D-printed piece, perfect for bringing a touch of fairy tale magic into your home. Designed to look like a real toadstool mushroom, this vase features a textured stem, a classic red cap…
- Pobrania
- 1121
- Polubienia
- 706
- Ocena
- 3
P
PrintablesTriple G Workshop
Toadstool Adventurer - Shooms Collection!
He's 3 inches tall but he ain't small! Watch your ankles around this fierce fighter. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
- Pobrania
- 1029
- Polubienia
- 367
- Ocena
- 5
P
PrintablesUgly Robot
Fully Articulated Toa Mata
Just adding a few missing pieces to the wonderful community effort, and collating them into one thingiverse - to create the posable toa mata as I'd imagined them as a kid. In particular: Created articulated arm/leg Created articulated…
- Pobrania
- 751
- Polubienia
- 123
- Ocena
- 0
P
PrintablesMZ4250
Giant Toad eating an adventurer
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
- Pobrania
- 751
- Polubienia
- 206
- Ocena
- 4,6
P
Printablescoollamatry mc
SD Card Toaster
I recommend printing the top and the lever with supports and brim to avoid stringy prints and warping. (My prints were made in PETG.) To assemble the toaster just insert the lever into the top… …and then the bottom onto the rest. Happy…
- Pobrania
- 712
- Polubienia
- 257
- Ocena
- 5
P
PrintablesAnde
Mushroom / toadstool and mushroom house (single extruder, multi color)
Cute and fun mushrooms! You can print a house or just a simple version. There are a bunch of files for different variations. Cap is common for all mushrooms. I printed in default orientation, with supports on the build plate. Stalk has…
- Pobrania
- 671
- Polubienia
- 348
- Ocena
- 4,67
P
PrintablesDilem
Hypnotoad
Hypnotoad compels you to like, download and post a make of this model. Hypnotoad wants to take over the world and needs you to print his army! My blender sculpture of the Hypnotoad from futurama. notes: Included in the files are 4…
- Pobrania
- 654
- Polubienia
- 121
- Ocena
- 5
P
PrintablesPrinted Encounter
Giant Toad
The ‘swallow’ version has a cavity so that you could physically cover the target of the swallow action :) Gain access to pre-supported files & more by supporting me on Patreon!
- Pobrania
- 651
- Polubienia
- 121
- Ocena
- 5
P
PrintablesDruk3D.JS
Lego Bionicle Classic Toa Mata Feet - reinforced and made printable
This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed. I recommend to print in PETG (this is what I've tested). Print with…
- Pobrania
- 610
- Polubienia
- 79
- Ocena
- 0
P
PrintablesMZ4250
Demon Toad
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
- Pobrania
- 598
- Polubienia
- 122
- Ocena
- 5
P
PrintablesFranchescor
Toad from Super Mario games
Toad from Super Mario games
- Pobrania
- 566
- Polubienia
- 79
- Ocena
- 5
P
PrintablesBob Loblaw
Toaster Tongs
A toaster tong...what more can I say. PETG is probably the wise move here. But a lot of filaments should work. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 20 Filament: SUNLU PETG Category:…
- Pobrania
- 533
- Polubienia
- 47
- Ocena
- 5
P
Printablescurd
Fishing Lure! by toast123 but the rings are stronger
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
- Pobrania
- 499
- Polubienia
- 46
- Ocena
- 5
P
PrintablesMarty Ayres
Toad McToadingtons
Scanned with the MakerBot Digitizer Desktop 3D Scanner Category: Scans & Replicas
- Pobrania
- 495
- Polubienia
- 54
- Ocena
- 0
P
PrintablesionDynamics
21° angled wedge for trackball mice (compatible with ProtoArc EM03)
Printed it with 10% grid infill, 0.30mm layer height and two perimeters. This leads to a very light print, but putting some EPDM pads on the bottom prevents it from slipping around your desk.
- Pobrania
- 480
- Polubienia
- 43
- Ocena
- 5
P
PrintablesDeMamba Prints
Frog/Toad Bust Sculpture
Used Poly.cam to scan a sitting Frog/Toad. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here: https://poly.cam/@DeMambaPrints
- Pobrania
- 446
- Polubienia
- 61
- Ocena
- 5
P
Printablesthall72
Lego Compatible (47312.dat) Bionicle Compatible Head Connector Block (Toa Metru)
This model is compatible with the lego system.
- Pobrania
- 438
- Polubienia
- 50
- Ocena
- 0
P
PrintablesDaniel BP
Toad soap holder
Because traditional soap trays are so boring.... Print instructions Supports are needed, try to rotate the part to have the minimum amount inside the mouth.
- Pobrania
- 424
- Polubienia
- 95
- Ocena
- 5
P
PrintablesLeon Orfik
Shroom-tastic Shapes (mushroom/toadstool cookie cutter)
Shroom-tastic shapes: Cookie cutter design This cookie cutter has been designed for ease of use and to create visually appealing, even edged toadstool shaped cookies. The design prioritises preventing dough from sticking, ensuring a…
- Pobrania
- 397
- Polubienia
- 140
- Ocena
- 5
P
PrintablesReProps
Kanohi Bionicle Mask(Toa Tahu)
Since today is 810nicle day I figured I'd model a Bionicle mask so here's my model of a Kanohi mask, worn mainly by the Toa Tahu. I would scale it around 300% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a…
- Pobrania
- 396
- Polubienia
- 61
- Ocena
- 5
P
Printableswilhems
The Torture Toaster - 8 Color - INDX Test object
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
- Pobrania
- 382
- Polubienia
- 94
- Ocena
- 5
P
PrintablesCRageFlash
Missile Toad
TInkerCAD base frog (but the pun only works if we pretend it's a toad) with a missile on top. Add some paint and watch this baby fly! Your loved ones will croak with groans if you have this hangin' in your pad!
- Pobrania
- 359
- Polubienia
- 37
- Ocena
- 4,25
P
PrintablesModMonster
Nintendo Switch 4 Game Cartridge Toaster
This toaster holds 4 Nintendo Switch game cartridges. I cut the original model in half to remove some of the storage slots, since I think otherwise it looks comically large. Prints in place with no supports. The filament you see here is…
- Pobrania
- 356
- Polubienia
- 35
- Ocena
- 5
P
PrintablesWinston
Hanna Checker Adapter for AutoAqua Smart Stir
This adapter collar is designed to allow the AutoAqua Smart Stir to accept the glass cuvettes that come with Hanna Checkers (Hanna Instruments HI731315).
- Pobrania
- 354
- Polubienia
- 29
- Ocena
- 5
P
PrintablesMikhail Babarinow
Toast Rack & Toast Tongs
Serving stand for laying out four hot toasts and tongs for removing hot toast from the toaster. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15 Filament: SUNLU PLA Category:…
- Pobrania
- 340
- Polubienia
- 35
- Ocena
- 4,8
P
PrintablesNebulaNoob
Toadette Amiibo Figure
Custom figure for Toadette Edit 12/30/23: Added Toadsworth and plan to upload a new version of Captain Toad aswell. Will update cover photo once finished
- Pobrania
- 336
- Polubienia
- 47
- Ocena
- 0
P
PrintablesPeter Martin
The Festive Fireplace - Keeping You Festive and Toasty at your desk.
A Festive Fireplace to charge your phone and keep you toasty. Should work with a lot of phones up to 20mm thick. I designed it around my iPhone 13 pro. The back piece slides forward and backwards to hold the phone in place. You can add a…
- Pobrania
- 326
- Polubienia
- 132
- Ocena
- 5
P
Printablesadamnant
Giant Toad Collection (DND/TTRPG)
See how to create 3d models from AI (image-to-3d / prompt-to-3d) here: https://www.patreon.com/posts/how-to-use-ai-to-120617822 Models in this collection: Giant Toad x 2 Robot Toad/Frog See my other models on Patreon:…
- Pobrania
- 323
- Polubienia
- 38
- Ocena
- 5
P
PrintablesSHR3D.eu
Heart toast cutters / Vykrajovátka na srdíčkové tousty
[EN] Set of heart-shaped cut-outs for making heart-shaped one-dish cakes. PLA is fully sufficient for printing. For hygiene reasons, it would be preferable to always use a new set, however, in case of repeated use, cleaning in the…
- Pobrania
- 322
- Polubienia
- 19
- Ocena
- 4
P
Printablesjimbob
Toaster oven Knobs
This is a replacement knobs for for toaster ovens. both the .25" D-pot and rotary switch knob. all units are in imperial. Category: Household
- Pobrania
- 304
- Polubienia
- 10
- Ocena
- 0
P
Printablesthall72
Lego Compatible (55327e.dat) Minifig Weapon Bionicle Mini Weapon (Toa Jaller)
This model is compatible with the lego system.
- Pobrania
- 301
- Polubienia
- 43
- Ocena
- 0
P
Printablespr3mium.cola
KRUPS Sandwich Toaster // Model: "FDK451" Handgriff Abdeckung (Replacement) // V9 added
Print Settings: PETG / PLA / ASA are all not working due to temperature → PA12-CF is working :)! thanks @Rumbledoc for the make! hi, Leider ist die Handgriff-Abdeckung die man entfernen muss um den Klipp des Sandwich Toasters zu…
- Pobrania
- 300
- Polubienia
- 15
- Ocena
- 5
P
PrintablesMatMake
Toad
I draw it really bigger than I print it. I use the scale down function in Cura with 30% as setting.
- Pobrania
- 285
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMax Lush
Toad Mushroom Head (painted in Bambu Studio)
Found this elsewhere and painted it in Bambu Studio, nothing fancy was very quick. I cut the rounded base flat so it can stand on it's own and be printed upwards. I recommend enabling tree supports!
- Pobrania
- 281
- Polubienia
- 31
- Ocena
- 4,5
P
PrintablesLowPolyFigures
Low poly toy toaster with bread slices
Cute geometric toaster with simple faceted design, including removable polygonal bread slices for pretend play.
- Pobrania
- 280
- Polubienia
- 109
- Ocena
- 4,33
P
PrintablesRunfrcover
4 slice SD Toaster!
Sliced, buttered and slaped back together, four slice SD card print in place storage toaster. Remixed from SD Card Toaster Print In Place by Dehapro | Download free STL model | Printables.com
- Pobrania
- 268
- Polubienia
- 51
- Ocena
- 5
P
PrintablesNexl
Toaster - wedding gift
This was my first model designed for 3D printing. It is printed several parts glued together with instant glue. It also includes a mechanical part / lever to lift - money - in this case. I plan to redesign the whole model so that it is…
- Pobrania
- 266
- Polubienia
- 105
- Ocena
- 4,57
P
PrintablesArea 3d Studio
Robot Toaster
Download my others models here Robot toaster inspired by matt dixon's illustration "Well done". no supports needed Painted files prepared for MMU and AMS. You can also print it in one color and paint it. Remember to set high purge volumes…
- Pobrania
- 262
- Polubienia
- 62
- Ocena
- 5
P
PrintablesMGdesign
Toad Double toad - Mario Bros
This is a surprise model of the iconic and so important Mario Bros character, Toad. In this case it was combined with a play on words as Toad means toad, we refer to 2 characters in 1. For its Mushroom head hides inside the soul of…
- Pobrania
- 262
- Polubienia
- 34
- Ocena
- 0
P
PrintablesMonster Atlas
Kuo Toa — Underdark Fish Folk | Free STL | D&D 5e Miniature
Kuo Toa — Underdark Fish Folk | Free Unsupported STL | D&D 5e Miniature Hey everyone, here's a free Kuo-toa Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out…
- Pobrania
- 258
- Polubienia
- 21
- Ocena
- 0
P
PrintablesStigern
Chonky Zen Toad
🐸 Chonky Zen Toad – Enlightenment Has Never Been This Thicc 🧘♂ Behold the Chonky Zen Toad —a creature of pure calm, absolute girth, and unapologetic peace. He’s not just meditating… he’s vibrating at a higher frequency of chunk. Few…
- Pobrania
- 251
- Polubienia
- 36
- Ocena
- 5
P
PrintablesLegoyeti6376 - 3d Printing Central
Piece of Toast
A piece of toast, fits with the rest of my breakfast files.
- Pobrania
- 251
- Polubienia
- 23
- Ocena
- 5
P
PrintablesHunter Rose
MissileToad - no small fins
I really liked foambrick's missiletoad ( https://www.thingiverse.com/thing:5155110 ), but the small fins were so thin I was having issues getting them to print correctly and even then they often broke off. So I did a quick remix and…
- Pobrania
- 250
- Polubienia
- 36
- Ocena
- 5
P
Printablesthall72
Lego Compatible (43558.dat) Bionicle Chest Armor (Toa Nuva)
This model is compatible with the lego system.
- Pobrania
- 249
- Polubienia
- 27
- Ocena
- 0
P
PrintablesHot3nd
Cute Toast Box
Cute Toast Box with 6 different faces to choose. Can print with single extruder. Can scale-up as you want but SCALE-DOWN IS NOT RECOMMENDED. There are 7 stl files in this model. One file is bottom part and the other six files are top part…
- Pobrania
- 245
- Polubienia
- 69
- Ocena
- 4,8
P
PrintablesAmos491
2022 Missile Toad Holiday Air Interceptor
Introducing the 2022 Missile Toad Air Interceptor (A.K.A Missile Toad of Christmas Present) for the holiday season. Achieve air superiority in the festive environment. This air unit boasts 8 holly jolly interceptor missiles for greeting…
- Pobrania
- 244
- Polubienia
- 116
- Ocena
- 5
P
PrintablesTheOuterBrim
Toy Toaster
PRINT INSTRUCTIONS / SETTINGS Shown images printed on MK4 Shown images printed in 0.2mm speed setting with input shaper Models tested in PLA (PolyTerra)
- Pobrania
- 231
- Polubienia
- 158
- Ocena
- 5
P
Printablesrevoun
Toad Token
Shopping Cart Token with Toad Mushroom Logo It has the size of 1€
- Pobrania
- 225
- Polubienia
- 23
- Ocena
- 5
P
Printablesthall72
Lego Compatible (43557.dat) Bionicle Compatible Toa Nuva Leg Section
This model is compatible with the lego system.
- Pobrania
- 220
- Polubienia
- 29
- Ocena
- 0
P
PrintablesReProps
Akaka Bionicle Mask(Toa Kopaka)
Here's my model of the Akaku mask from Bionicle, work by the Toa Kopaka. I would scale it around 500% percent when printing it(I'm not quite sure in the exact scale yet).I'll have a painting and post processing video up sometime. Check…
- Pobrania
- 219
- Polubienia
- 33
- Ocena
- 0
P
PrintablesB3ND
Articulated Flexi Cane Toad - 8mm glass eye compatible
Wowzers folks! What can I say about this one? I think the photos speak for themselves. The level of detail in this print is insane! And the glass eyes really bring it to life! :) 3mf file provided. Holes for eyes should appear in print…
- Pobrania
- 219
- Polubienia
- 44
- Ocena
- 5
P
PrintablesAmos491
2022 Missile Toad Holiday Surface Launcher
Introducing the 2022 Missile Toad Surface Launcher (A.K.A Missile Toad of Christmas Past) for the holiday season. Deploy the Missile Toad Surface launcher to any land position in the festive environment for ensuring that you can deliver…
- Pobrania
- 214
- Polubienia
- 102
- Ocena
- 5
P
PrintablesPeter Farell
Powdered Toast Man
Powdered Toast Man. Magically farting on a piece of powdered toast to give it the intended flavor. Otherwise “it was a good as toasted cardboard.” Probably needs a base. add your own.
- Pobrania
- 213
- Polubienia
- 68
- Ocena
- 5
P
Printablesthall72
Lego Compatible (53549.dat) Bionicle Compatible Foot Toa Inika Elliptical
This model is compatible with the lego system.
- Pobrania
- 207
- Polubienia
- 38
- Ocena
- 0
P
PrintablesMrt4k
Toaster - wedding gift (improved)
Der Originaltoaster wurde verbessert, indem die Wanne etwas vergrößert wurde und das Innenteil, das den Hebelmechanismus darstellt, stabiler konstruiert wurde und die seitlichen Stäbe als Halterung für die Drehknöpfe verlängert wurden.…
- Pobrania
- 207
- Polubienia
- 54
- Ocena
- 5
P
PrintablesHikingWithCam
Toaks Pot Lid
Pressure fit pot knob for Toaks and similar pots
- Pobrania
- 206
- Polubienia
- 19
- Ocena
- 0
P
PrintablesJason Englert
Hinge lock (w/ feet) for ProtoArc XK01-TP folding keyboard
These are clips for the ProtoArc XK01-TP folding keyboard. The concept would probably work for all of ProtoArc's trifold keyboards, but the length of the arms would probably have to be adjusted. I've included the .step files so you can…
- Pobrania
- 205
- Polubienia
- 18
- Ocena
- 5
P
Printablesbaconcraze
Airpods Pro 2 Toaster Charging Dock
Airpod charging dock, it operates like a little toaster you will need to purchase some additional parts to assemble. May work with gen 1 Airpod pros based off of the dimensions, but I have not tested it. Print the parts in the following…
- Pobrania
- 200
- Polubienia
- 72
- Ocena
- 0
P
PrintablesLee
Kuo-Toa marauder DND mini
Cred to AI (Gem or Chat to https://hyper3d.ai/rodin) Good print, and I am happy with it, but even with good support settings, be careful of the mace. I broke mine off and had to glue it back on.
- Pobrania
- 200
- Polubienia
- 9
- Ocena
- 5
P
PrintablesStawiamKlocki.pl
Fire Sword for LEGO CMF 29 71052 - Bionicle Tahu Cosplayer Minifigure | 57488 32558 Bionicle Weapon Toa Flame Sword 2 x 12 with 2 Pin Holes
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
- Pobrania
- 200
- Polubienia
- 35
- Ocena
- 0
P
PrintablesTriple G Workshop
Ornately Carved Toad Sculpture
Covered with intricate designs, this nature spirit will bring good luck to your spaces. Check out my other animals!!! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (…
- Pobrania
- 199
- Polubienia
- 49
- Ocena
- 5
P
PrintablesCatto Productions
Tiny Torture Toaster
He does the toast thing
- Pobrania
- 196
- Polubienia
- 14
- Ocena
- 0
P
PrintablesX11PANDA11X
Acoustic Guitar Stratoacoustic
Versión para impresión 3d de la Fender Stratacoustic. Guitarra acústica diseñada completamente desde cero en Fusion 360. Se realizó en PLA salvo el refuerzo interior que está realizado en petg al 25% de relleno y 4 paredes. Está pegada…
- Pobrania
- 194
- Polubienia
- 74
- Ocena
- 0
P
PrintablesB3ND
Flexi Toad v2 - 6mm + 8mm glass eye compatible
The Flexi Toad remix by Cosmic Prints now compatible with 6mm and 8mm glass eyes. This version has stronger links for the rear legs. :) Two variations provided. One for 6mm glass eyes and a bigger one for 8mm glass eyes. Files are named…
- Pobrania
- 193
- Polubienia
- 45
- Ocena
- 0
P
PrintablesAcilius
Suporte Papel Toalha
- Material: Fita dupla face, Cola instantânea e um clip de papel (diâmetro 1mm). - Fixado com fita dupla face; - Reforçado com um arame, no caso, utilizei um clip de papel.
- Pobrania
- 192
- Polubienia
- 13
- Ocena
- 5
P
PrintablesMachenna56k
Buttered Toast Charm
A small charm with added loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of…
- Pobrania
- 190
- Polubienia
- 99
- Ocena
- 0
P
PrintablesXlucine
Croaking Missile Toad
A remix of BINX's percussion frog, this replaces the beater with a missile shaped one to make it into a festive decoration. I've also included gcode and a 3mf with the scanned toad oriented to avoid any need for internal supports. The 3mf…
- Pobrania
- 184
- Polubienia
- 41
- Ocena
- 4,75
P
PrintablesCWCDesigns
The "Dry-O-Matic" Sponge Toaster
This here is The "Dry-O-Matic" Sponge Toaster. I made this for my kitchen sink for the sponges to dry a bit better. When printing this use supports for the toaster handle but make sure to use support blockers for the drain hole. Make sure…
- Pobrania
- 183
- Polubienia
- 37
- Ocena
- 5
P
PrintablesAnde
Mushroom house / toadstool jewelry organizer
My daughter really likes mushrooms. No, she doesn't eat them (I, on the other hand, love the taste); she just thinks mushrooms are cool. Or slay, I can't understand the youth slang. Anyway, I made her a jewelry organizer in shape of a…
- Pobrania
- 181
- Polubienia
- 120
- Ocena
- 4
P
PrintablesJon
Missile Toad
I used the toad from 3D Printable The Slumbering Toad by FrostholdMini (myminifactory.com) and paired it with Large Missile Pair with Pylon by sigmazero - Thingiverse . I cut the missile pylon and put its base in the toad. The toad was…
- Pobrania
- 175
- Polubienia
- 17
- Ocena
- 5
P
PrintablesUnreal Visionz
Toad
Toad from Super Mario Bros. If you enjoy the model please like and follow for more!
- Pobrania
- 175
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAndun_HH
Clip for Sandwich Toaster
This is a replacement clip for my sandwich toaster, because the original clip broke. The new clip is much stronger, than the old one. I printed the clip in PLA, because I believe, that the heat will not get to the clip. I will update…
- Pobrania
- 171
- Polubienia
- 16
- Ocena
- 0
P
PrintablesPajaa
TOAKS 750ml Lid Holder
My original TOASK bag (15g) looks little bit tired so I made this clip (6g) to hold lid. As side effect I reduce the weight of my cooking set. It should be OK also for 650ml version.
- Pobrania
- 160
- Polubienia
- 29
- Ocena
- 4,5
P
PrintablesJeremy Bechen
Mario Toadstool (Mushroom) Planter
Small planter in the style of a mushroom from the Mario games. All STLs are already in print orientation. Layer height doesn't really matter – I used 0.30mm. Infill doesn't really matter, I used 15% rectilinear. Only the “ShroomCap” needs…
- Pobrania
- 160
- Polubienia
- 107
- Ocena
- 0
P
PrintablesChewt
Toad with Legs
The idea came to me in a dream, and I frantically searched online for something similar. I couldn't find one so I decided to take matters into my own hands. Enjoy :D I recommend printing with his head to the plate and supports for his…
- Pobrania
- 159
- Polubienia
- 23
- Ocena
- 0